+(91)-9871034100
PHONE NO
07AOSPS8386M1ZM
GST NO
Enquiry Now

Elementor #1717

Oct 11, 2021 Dwyer Products INDIA DELHI
Model 480 Vaneometer Swing Vane Anemometer

Rs 7,500 / Piece

Model 480 Vaneometer Swing Vane Anemometer The 480 Vaneometer™ Swing Vane Anemometer is a durable low-priced instrument specifically designed to simplify the measurement of low air velocities from 25 to 400 feet per minute. OSHA, EPA and other safety ventilation requirements for spray booths and at fume, smoke and dust exhaust hoods can now be quickly checked, even by untrained personnel. Its small size and light weight – only four ounces make it ideal to carry from one work station to another. A versatile steel mounting bracket for continuous monitoring is also included. The Vaneometer™ Swing Vane Anemometer is accurate to ±5% of full scale to 100 FPM and ±10% from 100 FPM to top of scale. It has a spirit level to ensure accurate readings and the large scales are easy to read and visible from both sides. The housing is molded from tough ABS plastic and easy to clean with soap and water. The polyester vane can be cleaned with lacquer thinner. A spare vane is provided. Use a Vaneometer™ Swing Vane Anemometer to measure velocity of air flow into laboratory fume hoods and at paint spray booths to determine when to change filters. Or wherever needed to meet OSHA standards of ventilation for smoke, dust or fume removal. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: delhi Production Capacity: 8368801023

Series 477 Handheld Digital Manometer
Measuring Range 0 to 20 inch WC
Connection 3/16 inch ID Tubing
Brand Dwyer
Power Supply 9 V battery
Series 477 Handheld Digital Manometer Series 477 Handheld Digital Manometers are packed with features you need to make low pressure measurement and recording faster, easier and more accurate than ever. First, you can instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. Next, a non-volatile memory function enables storage of up to 40 readings – perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct. The Series 477 is FM approved intrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4. When working in poorly lighted areas, just switch on the handy backlight feature. It automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. We even included an audible alarm to warn you of overpressure plus a visual alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.
  • Product Applications : Field calibration.,Clean room checks,Air velocity monitoring with Dwyer Pitot tube. etc.
SPECIFICATIONS Service: Air and non-combustible compatible gases. Accuracy: ±0.10% of full-scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scalefrom 32 to 60 and 78 to 104°F (0-15.6 and 25.6-40°C). Pressure Hysteresis: ±0.1% of full-scale. Pressure Limits: See chart. Temperature Limits: 32 to 140°F (0 to 60°C). Storage Temperature Limits: -4 to 176°F (-20 to 80°C). Display: 0.42?? (10.6 mm) 4 digit LCD. Resolution: See chart. Power Requirements: 9 V alkaline battery, installed non-functional, userreplaceable. Weight: 10.2 oz. (289 g). Process Connections: Two barbed connections for use with 1/8?? (3.18 mm) or3/16?? (4.76 mm) ID tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only.Two compression fittings for use with 1/8?? (3.18 mm) ID x 1/4?? (6.35 mm) ODtubing for 477A-6 and 477A-7 only.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
475 Mark III Handheld Digital Manometer
Brand DWYER USA
Model 475 Mark III
475 Mark III Handheld Digital Manometer The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1″ w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gage. The Series 475-FM Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meet the most demanding applications and to provide stability of instrument reading, the 1″ w.c. range is compensated for position sensitivity through use of a unique dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front panel control on-off, auto zero, and pressure unit selection. No setup or leveling. The large 0.42″ LCD display is easy to read, minimizing data collection errors. Units include a “low battery” indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 18″ or 316″ I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
HM35 Precision Digital Pressure Manometer

Brand DWYER USA
Model HM35
Application Industrial, Laboratory
HM35 Precision Digital Pressure Manometer The High Precision Series HM35 Digital Manometer is designed to reliably measure and log pressure measurements for critical applications. This family of manometer can measure absolute pressure, differential pressure or gauge pressure with up to 0.05% accuracy. The data logging function can store up to 10,742 readings and transmit the readings to a PC through an IR serial port. The large display can graphically display trends in the data as well as peaks and valleys. The series HM35 comes standard with a calibration certificate so that the instrument can be used as a secondary calibration standard when testing other pressure instrumentation. This manometer is ideal for laboratories, calibration facilities, and other critical pressure applications.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
HM28 Handheld Digital Manometer

Brand DWYER USA
Model HM28
Application Industrial, Laboratory
HM28 Handheld Digital Manometer The Series HM28 Digital Hand-Held Manometer is a precision instrument designed to measure a wide range of pressures to a very high accuracy. The unit incorporates a variety of features in an easy to use format that makes it useful in a wide variety of applications. Features include: measurement in all common pressure ranges, display resolution to 0.001, differential or relative measurement, two line liquid crystal display, and adjustable auto power off to conserve battery. We are so proud of the accuracy of the HM28 that we provide a certificate of calibration with the unit at no additional cost. Depending on your application, the HM28 can be used as a secondary calibration standard for your other pressure instrumentation.Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
490 Wet Handheld Digital Manometer

Brand DWYER USA
Model 490
Application Industrial, Laboratory
490 Wet Handheld Digital Manometer Series 490 Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings for later recall and a backlight provides auxiliary lighting for hard-to-see locations. Standard are a hold feature and both visual and audible overpressure alarms. A new feature added to the Series 490 is a field adjustable damping. This allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications. A 9V alkaline battery is included that provides up to 100 hours of operation.  
  • Product Applications : Balance hydronic heating or cooling water loops,Check pump or chiller performance,Determine pressure head loss from valves and pipe reduction.
Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
1223 Flex-Tube U-Tube Manometer

Brand DWYER USA
Model 1223
1223 Flex-Tube U-Tube Manometer These inexpensive manometers measure positive, negative and differential pressures. Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple “U” Tube with the durability of tough, long-lasting plastic construction. Columns are of .375″ O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility. You can choose from numerous models and features including over-pressure safety traps, in full scale ranges from 8″ to 36″ of water or mercury. All are suitable for total pressures to 100 psi – for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manometer is needed. Standard ranges and markings as shown, or special ranges, colors, logos and brand names for OEM quantity orders are available.Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 

1212 Gas Pressure Kit Slack Tube Manometer
Brand DWYER USA
Model 1212
1212 Gas Pressure Kit Slack Tube Manometer 1211 Handy Roll-Up Manometer with Laboratory Accuracy Dwyer® Slack Tube® Manometers are as accurate as the finest laboratory “U” gages – yet they are made to roll up compactly for easy carrying and to withstand rough usage. Simply unroll the Dwyer® Slack Tube® Manometer and set up to read static pressure, vacuum, or differential pressure. Magnetic clips hold it firmly to any steel surface or hang it on a nail. Turn connectors one revolution to open. When the pressure is imposed, add the number of inches one column travels up to the number of inches the other column travels down. When reading is completed turn connectors to seal columns, roll up manometer into compact coil and tuck it away in its plastic case or a tool box. No fluid lost. No loose caps or inserts to lose. Dwyer® Slack Tube® Manometers cover a wide range of pressure readings from 4-0-4 inches up to 60-0-60 inches. Use them in determining velocity and static pressures, for leakage, fan and blower tests, calibrating control devices, checking gas pressure and many other applications. All models have flexible vinyl-plastic columns and flexible spring steel scale calibrated in inches of water using water; and inches of mercury using mercury. Scale is center-mounted between columns to eliminate parallax error and has a full 2″ sliding zero adjustment. All Dwyer® Slack Tube® Manometers feature exclusive molded nylon tubing connector assemblies with rapid shutoff design in an acrylic plastic top. One turn counter clockwise and the instrument is ready for use. Another turn seals the tubes completely. Molded all-nylon construction makes this assembly corrosion-proof, leak-proof and practically unbreakable. Tubing connectors extend horizontally allowing 360° freedom. Tubes won’t bend or pinch off. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
 

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

 

BrandDWYER USA

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

1227 as a regular U-tube manometer to read high-range pressure on the right leg, or as an inclined manometer to read low-range pressure on the bottom leg. Simply incline manometer until fluid levels read zero. No spirit level required. Magnetic clips hold the gage in position on a steel duct surface.

Most versatile and useful low cost manometer we know of. Designed for installation and servicemen. A sturdy, clear plastic manometer, it offers single, direct readings in two ranges: As a U-tube, it reads from 0 to 16″ of water; as an inclined gage, it reads from -.20 to 0 to 2.6″ of water. Model 1227M (Metric) is 0 to 400 mm water column as a U-tube and -5 to 0 to 70 mm water column as an inclined gage. “How-to-use” instructions are printed directly on the scale.
Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 

Series 1213 Gas Pressure Manometer

Brand DWYER USA
Model Series 1213
Series 1213 Gas Pressure Manometer
Provide visual indication of pressure with the Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 18″ nylon male NPT to barb fitting. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
Model THI-10 Digital Thermohygrometer

Brand DWYER USA
Model THI-10 Digital Thermohygrometer The Model THI-10 Digital Thermohygrometer accurately measures relative humidity and ambient temperature. Up to 99 readings can be stored in non-volatile memory allowing the HVAC technician to record the data after returning to the office. This compact thermohygrometer also features user selectable engineering units, MaximumMinimum functions, dew point and wet bulb temperature measurements. The Model THI-10 includes a soft carrying case with a belt loop for easy transportation. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
Model ANE-1 Differential Pressure Anemometer

Brand DWYER USA
Model Model MW-1
Usage Industrial, Laboratory
Model MW-1 Pocket Wind Meter Measure wind speed and temperature with the Model MW-1 Pocket Wind Meter. Easily view readings on the four digit 2″ (51 mm) high LCD display with wind speed bar graph. Selectable air velocity ranges include ms, ftmin, kmh, mph, and knots. Ambient temperature recorded in °F or °C. The MW also features automatic shut-off, detailed instruction manual and protective plastic water resistant housing that floats. Accessories include a lanyard.Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
 
Model 9671 Multifunction Vane Thermo-Anemometer
Model 9671 Multifunction Vane Thermo-Anemometer

Measure air velocity, air volume, temperature, humidity, and BTU with the Model 9671 Multifunction Anemometer. The large 1.8″ (45 mm) display allows users to easily view readings. User-selectable wind speed units include ftmin, ms, knots, mph and kmhr. In addition to these functions, the 9671 is capable of measuring relative humidity, wet bulb temperature, dew point and BTU capacity. A built-in sensor records ambient temperature in °F or °C. Model 9671 features include data hold, along with the ability to record minimum, maximum and average readings on a single point. Additional features include an RS-232 interface setting that allows the unit to download data, as well as upload up to 99 measurements through pre-edited PC files. The 9671 also has a detachable probe for easy replacement, if necessary, or to attach a miniature vane probe. Each unit includes hard carrying case, batteries, software CD, cable and instruction manual.


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

Model MW-1 Pocket Wind Meter

Application Hospital
Portable Yes
Model Model ANE-1
Model ANE-1 Differential Pressure Anemometer   The Model ANE-1 Differential Pressure Anemometer is a robust and durable bidirectional anemometer with no moving parts or sensing electronics. With the installed tubing, the ANE-1 connects easily to any manometer or applicable pressure sensing device and is capable of measuring a wide velocity range. The air velocity range and accuracy is dependent on the installed manometer, and the ANE-1 retains the accuracy as long as it is dust free. The ANE-1 is made from high quality ABS plastic, comes with a convenient handle, and includes 5” of blue and 5” of red silicone tubing (2 mm ID x 4.5 mm OD) with removeable adapter sized 2 mm OD to 316″ OD that has two removeable 5″ clear silicone 316″ ID x 38″ OD tubing versatile process options.
  • Product Applications : Differential Pressure
Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

Air Velocity Meter
Model 475-1-FM-AV Air Velocity Kit Convenient all-in-one kit is small, light and easy to use. No set-up or leveling needed. Digital manometer reads from 0-20.00″ w.c. with ±0.5% F.S. accuracy and minor divisions to 0.01. Large 12″ LCD readout is easy to see in poorly lighted areas and has “low battery” warning. Included is a 6″ stainless steel Pitot tube with integral compression fitting to hold it securely when taking readings. Also, two static pressure tips with magnetic mounting measure pressure drop across filters, condenser coils, etc. Kit comes complete with rubber tubing, 9V battery, step drill, AV calculator slide rule, and custom fitted carrying case. An indispensable test kit for the plant engineer, industrial hygienist and HVAC technician. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 

400 Air Velocity Meter
ir pressure – from 0 to 10

feet per minute of velocity – from 400 to 10,000 fpm

.

400 Air Velocity Meter

Measure both pressure and air velocity
Read the red figures directly in feet per minute of velocity – from 400 to 10,000 fpm No conversion tables needed for air at standard conditions. Read the black figures in inches of water column air pressure – from 0 to 10″ w.c.

Our most popular precision air velocity instrument, the No. 400 is used to balance air conditioning systems, measure pressure drop across filters, and test fan and blower discharge and inlet pressures, as well as air velocity in ducts. It offers the convenience of a dual purpose instrument – plus high accuracy on easy-to-read scales. The Series 400 includes “leveling” adjustment and glass bubble level, which makes it a versatile, all around manometer for the air conditioning and balancing contractor or industrial plant.

Kit includes No. 400 Air Meter and all accessories:
Combination InclinedVertical Manometer. Dwyer® Durablock® precision machined solid acrylic plastic construction is virtually indestructible. Has both inclined section for high accuracy and vertical section for extended range. Pressure marked in black, Velocity in red figures. Easy to read – no reference tables needed. Has screw leveling adjustment and ground glass bubble level

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Model EMMA Digital Multifunction Environmental Meter
Model EMMA

Model EMMA

.


Model EMMA Digital Multifunction Environmental Meter

 

Monitoring the environmental conditions is more convenient with the Model EMMA multifunction meter. Humidity, temperature, air velocity, air flow, sound and light measurements are combined in one easy to use instrument. The large, dual-line 4-digit LCD display shows both the current and average reading. For reading measurements in dimly lit areas, the display has a built-in back light. Besides measuring the current and average reading, the Model EMMA allows the user to read the minimum, maximum and differential measurement for each of the parameters. Included with the meter is the carrying case, rubber boot, battery and tri-pod.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


160S Stainless Steel Pitot Tube

Rs 10,029 / Piece

Brand

DWYER USA

.

Model

160S

.

Application

Industrial, Laboratory

.


160S Stainless Steel Pitot Tube

 

 

Series 160S Pitot Tubes are designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in smoke stack and other environmental testing. Large 516″ dia. stainless steel tubing resists plugging under harsh, sooty conditions which quickly block conventional flow sensors. Total and static pressure tubes are precisely aligned and welded together every six inches for maximum accuracy, strength and long term durability. Versatile 18″ female NPT connections easily adapt to any type of pipe or tubing. A pair of 18″ NPT to 316″ I.D. tubing adapters is included plus a handy molded vinyl cap to protect tip when not in use. Supplied with complete instructions.Permanent Mounting (PM) models include 1 inch dia. welded stainless steel sleeve and adjustable compression fitting with 1 inch male NPT mounting threads. Adjust depth, lock in place

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Series 166T Telescoping Stainless Steel Pitot Tube

Rs 10,029 / Piece

Brand

DWYER USA

.

Model

Series 166T

.

Application

Industrial, Laboratory

.


Series 166T Telescoping Stainless Steel Pitot Tube

 

The Model 166T Telescoping Pitot tube is a unique air flow sensor which can quickly and easily be adjusted for any duct insertion length from 11.5 to 36 inches (29.2 to 91.4 cm). Now, this single compact unit can replace up to five conventional fixed length Pitot tubes. For even greater convenience, it is securely protected by a custom fitted polyethylene carrying case. Telescoping sections lock in place as they are extended, enabling use of the handle grip to gauge proper alignment of the tip within the airstream. Stainless steel construction resists corrosion. Hemispherical tip has 1.0 flow coefficient, is 18″ dia. (3.2 mm). Largest section is 38″ (9.5 mm). Weight (with case) 1 lb, 9 oz (709 g). Case: 12.5 x 6.25 x 1.75 in.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Model 160G Averaging Air Flow Grid

Rs 10,029 / Piece

Brand

DWYER USA

.


Model 160G Averaging Air Flow Grid

 

The Model 160G Averaging Air Flow Grid is a precision sensing instrument used to measure face air velocity on grills, diffusers, registers, exhaust hoods, coils, filters, dampers and similar restrictions. With its 16 sensing points, the 160G Air Flow Grid provides an average flow sensing area across its 16.5″ length and width. Included color coded tubing connects to the integral barbed fittings, providing a differential pressure signal to a gage or manometer where the readings can be converted into a velocity or flow reading. The 160G comes standard with an 18″ handle and two 17″ extensions offering a maximum reach of approximately 52″. The uniquely designed swivel and tightening nut allows the user to position the sensing grid at any angle for ease of use in hard to reach locations. Store in the separate UHH-C2 hard carrying case with foam cut-outs perfectly sized for the 160G, as well as various other instruments in the AQTI Air Quality Test Instruments line.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI


Model TH2-10 Thermo-Hygrometer Pen


Model TH2-10 Thermo-Hygrometer Pen

 

The Model TH2-10 Thermo-Hygrometer Pen is a compact handheld device that measures temperature, humidity, dew point, wet bulb, and heat index for heat stroke prevention. The TH2-10 has many applications including HVAC, home inspection for examining heating or cooling conditions, outdoor weather monitoring to avoid heat stroke, and construction or industrial inspection. This product offers fahrenheit and celsius units, data hold function, and 0.1°F°C resolution. Batteries are included.

 

  • Product Applications : Home Inspection (for examining heating or cooling conditions,HVAC,Construction or Industrial Inspection Etc.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI


Model 485B Thermo-Hygrometer

Model 485B

Model 485B

.


Model 485B Thermo-Hygrometer

 

 

Model 485B Digital Thermo-Hygrometer is a versatile, compact, hand-held instrument for measuring percentage of relative humidity and temperature in °F or °C. Dew point and wet bulb temperature is derived from relative humidity and temperature measurements and displayed on the LCD. Hold key freezes the current temperature and relative humdity readings for situations where readings fluctuate. Store up to 99 readings with the nonvolatile memory function – ideal for technicians needing to take multiple readings for later analysis.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI


1205B Handheld CO2 Gas Analyzer

Brand

DWYER USA

.

Model

205B Handheld CO2

.

Application

Industrial, Laboratory

.


1205B Handheld CO2 Gas Analyzer

 

The Model 1205B Gas Analyzer accurately measures the concentration of carbon monoxide (CO) and carbon dioxide (CO2) in a duct or space. The Gas Analyzer displays the measurement on a two line digital LCD display with backlight. The unit’s memory stores up to 255 sets of readings that are logged manually or auto-logged with 1 to 10 minute intervals. Besides measurement recording, Model 1205B can provide a summary of average and maximum levels reached during recording. Results then can be printed via an optional infrared printer. Model 1205B includes batteries, 120V power supply, protective rubber boot with integral magnet, sampling probe, and a canvas carrying case.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI


Model 450A-1 Digital Pocket Size Carbon Monoxide Meter

 

 

Application

Industrial, Household

.


Model 450A-1 Digital Pocket Size Carbon Monoxide Meter

 

 

The Model 450A-1 Digital Pocket Size Carbon Monoxide Meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in backlight brightens the display. Model 450A includes soft carrying case with belt loop, wrist strap, and batteries.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI


Model 8901 Vane Thermo-Anemometer


Model 8901 Vane Thermo-Anemometer

Model 8901 Vane Thermo-Anemometer is ideal for balancing air conditioning and heating ducts or checking the operation of fans and blowers. Model 8901 measures air volume in cubic feet per minute and cubic centimeters per second, as well as air velocity in ftmin, ms, knots, kmhr and mph with ±2% accuracy. The multifunction LCD can simultaneously display air velocity and temperature or air flow and temperature in selectable units. Built-in temperature sensor provides measurements with an accuracy of ±2 with the capability to display the results in °F°C. Model 8901 can either store measurements or transfer the data to a PC via RS-232 communication. Additional features include data hold, as well as the ability to record minimum, maximum and average readings. These units also feature a detachable probe for easy replacement, if necessary. Model 8901 includes battery, carrying case and instruction manual.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 

UHH Universal Handheld Test Instrument
Brand

DWYER USA

.

Low Battery Indication

Yes

.

Type of Tachometer

Analog Tachometer, Digital Tachometer, Contact Tachometer, Non Contact Tachometer

.


UHH Universal Handheld Test Instrument

The Model UHH Universal Handheld Test Instrument is a highly versatile instrument that offers the utmost flexibility and ease of user operation by having the capacity to work with a variety of Dwyer Instruments, Inc. compatible sensing modules and probes. Additional wired and wireless probes or modules are instantly recognized by the UHH without any user reprogramming or alteration, allowing seemless sensor addition, upgrade or replacement. See the AQTI and AQTIP Series in the Dwyer Instruments, Inc. catalog or website www.dwyer-inst.com for available packages and sensors.

 

The Universal Handheld offers a slew of features that enable a technician to quickly set up and intuitively navigate through their daily activities. Data is stored via the internal memory or separate SD card in various auto or manual logging operations. Logged files can be quickly transferred to a device through a USB cable or by a portable SD card. The display can operate in standard numerical meter mode, gage mode with analog needle, gage mode with additional passfail operation zones, and strip chart mode which enables a simplified visual tracking of the process. The four directional buttons, combined with the three soft key buttons aligning to corresponding screen functions, allow for quick navigation through the four main operation menus. The rugged plastic case with protective thermo-plastic over-mold, along with the dust-shielding rubber caps, permit the unit to handle abuse and properly withstand dusty environments. The base UHH includes an integral molded compartment that securely holds wireless modules.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 
Model MST2-01 Digital Moisture Meter
Brand

DWYER USA

.

Warranty

1 Year

.


Model MST2-01 Digital Moisture Meter

The Model MST2-01 Digital Moisture Meter is a high-accuracy instrument used for determining the moisture content in wood, gypsum, bamboo, paper and other various materials. This unit also has the ability to measure ambient temperature and relative humidity. The large digital LCD makes measurements easy to read, while the hold function makes them easy to record. The MST2-01 includes a protective cap, two replacement pins, and one battery.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 
Series 160 Stainless Steel Pitot Tube
Brand

DWYER USA

.

Model

Series 160

.

Application

Laboratory, Industrial

.


Series 160 Stainless Steel Pitot Tube

Ideal for use with our precision manometers and air velocity gauges, Dwyer® Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 34″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

 

  • Product Applications : Monitor or control static or differential pressure when combined with differential pressure gage, switch or transmitter.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 
Model 1207A Handheld Flue Gas Combustion Analyzer
Brand

DWYER USA

.

Model

Model 1207A

.

Application

Industrial Use, Laboratory Use

.


Model 1207A Handheld Flue Gas Combustion Analyzer

The Versatile Model 1207A Handheld Flue Gas Combustion Analyzer makes adjusting boilers for optimum efficiency quicker and easier. With the large LCD display, users can monitor four parameters simultaneously and change the parameters shown using the rotary dial selection switch. For extra protection, the analyzer comes standard with a protective boot and magnetic back. In order to track the measurements, the 1207A can store up to 255 time stamped test sets in memory and can output measurements to a serial printer.

The 1207A comes preprogrammed for Natural Gas, Light Oil, Propane, Butane, LPG, and Wood Pellets. Along with analyzing combustion measurements, the analyzer can be used as a COCO2 indicator, pressure manometer, or thermocouple thermometer.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Model AQH-20 Handheld Indoor Air Quality Meter

Model AQH-20

Model AQH-20

.


Model AQH-20 Handheld Indoor Air Quality Meter

The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 

Series MST-01 Digital Moisture Meter
Brand

DWYER USA

.

Material

Series MST-01

.


Series MST-01 Digital Moisture Meter

The Series MST-01 Digital Moisture Meter is a high accuracy instrument used for determining the moisture content in wood, gypsum, bamboo, paper and other various materials. This unit features a durable and rugged enclosure which ensures a long life span. The large digital LCD makes measurements easy to read, while the hold function makes them easy to record. The MST-01 includes a nylon carrying case, protective cap, two replacement pins and one battery.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Model 471B Thermo-Anemometer Test Instrument

 

Model 471B

Model 471B

.


Model 471B Thermo-Anemometer Test Instrument

 

The Model 471B Digital Thermo Anemometers are versatile dual function instruments that quickly and easily measure air velocity or volumetric flow plus air temperature in imperial or metric units. High contrast LCD display shows both selected readings simultaneously. Convenient backlight provides perfect visibility in low light conditions. Light automatically shuts off after 2-12 minutes to prolong battery life. Low battery warning is included. Stainless steel probe with comfortable hand grip is etched with insertion depth marks from 0 to 8 inches and 0 to 20 cm. Extruded aluminum housing fully protects electronics, yet is lightweight and comfortable to hold even when taking multiple readings as part of duct traverses. Up to 99 readings may be stored for later retrieval. An integral sliding cover protects sensors when not in use. Items included with the 471B are 9 volt alkaline battery, sensing probe, wrist strap and custom carrying case.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Model 8904 Integral Vane Thermo-Anemometer


Model 8904 Integral Vane Thermo-Anemometer

Simultaneously measure air velocity and temperature with the Model 8904 Integral Vane Thermo-Anemometer. The large 1.3″ (34 mm) display allows users to easily view readings. User-selectable wind speed units include ftmin, msec, knots, mph and kmhr. Additionally, a built-in sensor records ambient temperature in °F or °C. Model 8904 features include data hold, the ability to record minimum, maximum and average readings on a single point and an RS-232 interface setting. The units can also record and average up to 2 hours of data while displaying the continuous running average. Model 8904 includes hard carrying case, battery and instruction manual. This compact meter is ideal for HVAC inspection, energy audits and balancing applications.

 

  • Applications : This meter is most ideal for measuring heat, ventilation, air conditioning, refrigerating wind flow and temperature.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Series MVA Mini-Vane Thermo-Anemometer


Series MVA Mini-Vane Thermo-Anemometer

The Series MVA Mini-Vane Thermo-Anemometer has the ability, depending on the model, to measure air velocity, volume flow, temperature, relative humidity, and barometric pressure. With its 1.18″ diameter (30 mm) vane, the Series MVA is ideal for spot measurements at air outlets. The MVA- 02 is capable of detecting air flows up to 4921 ftmin (25 ms) and temperatures up to 140°F (60°C). The MVA-03 additionally detects humidity from 0 to 100% with high accuracy. The MVA-04 can do all three of the above functions, plus adds the feature of measuring absolute pressure from 10.3 to 32″ Hg (350 to 1100 hPa). The Series MVA anemometers include a wide variety of user selectable units. These units feature a 4-digit LCD display, data hold, ability to record maximum and minimum, storage up to 99 air velocity records, and an auto-shutoff to prolong life. The Series MVA also has a detachable probe for convenient replacing, if necessary. The unit includes a 6 blade mini-vane probe, nylon case, and a battery.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Model 89088 Pocket Wind Meter

 


Model 89088 Pocket Wind Meter

 

The Model 89088 measures wind speed, temperature and wind chill accurately with its rotating vane and thermo-anemometer sensor. The body and rotating vane are constructed of light weight, sturdy ABS plastic. The ABS impeller spins on a high precision jewel bearing allowing for maximum performance. Wind speed, maximum wind speed, temperature and wind chill can quickly be viewed on the LCD display in user selectable measuring units of degrees F or C, ms, ftmin, Knots, MPH, Khr and Beauforts. The 89088 also features a data hold button and a 5 minute automatic shut-off to conserve battery life. Accessories include a supplied battery and a cloth carrying pouch.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 

460 Air Meter
Brand

DWYER USA

.

Model

460

.

Application

Industrial Use, Laboratory Use

.


460 Air Meter

Simple and quick, the No. 460 Air Meter is popular for servicing air conditioning, heating and ventilating equipment. Direct reading velocity and static pressure scales – both low and high ranges – show supply and return grille velocities, furnace draft, pressure drop across filters, etc. The 460 gives consistent, accurate results with no tedious calibration. Rugged plastic for rough daily use. Dual velocity ranges read 260-1200 and 1000-4000 fpm; pressure ranges from .005-.09 and .05-1.0 inches w.c.

Complete Kit includes air meter, return and supply grille probes, angle connector, cleaning materials, instruction card, air velocity calculator and carrying case

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


Series AQTI Air Quality Test Instrument Kits

Series AQTI

Series AQTI

.


Series AQTI Air Quality Test Instrument Kits

The Series AQTI Air Quality Test Instruments combine the versatile Model UHH handheld base with various compatible probes and modules. This versatile combination provides a line of instruments capable of streamlining a technician’s everyday testing by combining all into one product. All compatible probes and modules can be field adapted at any moment and are instantly recognized by any UHH handheld base instrument. The plug and play probes allow a user to run through various tests, eliminating the need to switch instruments and recall how to navigate all the various equipment from multiple vendors, reducing time and simplifying operation. Series AQTI Air Quality Test Instruments come prepackaged in thermo-anemometer or thermo-hygrometer probe kits. Additional wired and wireless probes may be ordered separately to create any customized test package to suit your needs.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 

Series 160E Ellipsoidal Tip Pitot Tube
Brand

DWYER USA

.

Model

Series 160E

.

Application

Industrial Use, Laboratory Use

.


Series 160E Ellipsoidal Tip Pitot Tube

 

Series 160E Pitot Tubes are widely used in the U.K. and Europe for applications demanding high accuracy when measuring the flow of air or other compatible gases. Precision crafted tip configuration allows air to pass smoothly with minimum turbulence for consistent, reliable readings. Exterior indicator arm is aligned parallel to the 5 in. (13 cm) sensing tip so you always know that unit is properly positioned inside duct. Sliding depth indicators grip firmly to ensure uniform insertion – critical when making multiple measurements as part of a complete traverse; the best way to determine average velocity. Total and static pressure taps are 14″ (6 mm), permanently silver soldered to the connection block, leak-proof and durable.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 
Series 160F Straight Stainless Steel Pitot Tubes
Brand

DWYER USA

.

Model

Series 160F

.

Application

Industrial Use, Laboratory Use

.


Series 160F Straight Stainless Steel Pitot Tubes

 

Ideal for use with our precision air velocity gages, transmitters and digital test instruments, the Series 160F Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. Permanent, stamped insertion depth graduations on sides of the 160F Pitot facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Straight design allows for easy insertion into ducts through grills and pressure taps as well as aids in positioning in hard to reach locations where a hook style Pitot tube may not allow access.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI


Model 8912 Vane Thermo-Anemometer


Model 8912 Vane Thermo-Anemometer

Measure air velocity, air volume, temperature, humidity, and BTU with the Model 8912 Vane Thermo-Anemometer. The large 1.7″ (44 mm) display allows users to easily view readings. User-selectable wind speed units include ftmin, ms, knots, mph, and kmhr. In addition to these functions, the 8912 is capable of measuring relative humidity, wet bulb temperature, dew point, and BTU capacity. A built-in sensor records ambient temperature in °F or °C. Model 8912 features include data hold, the ability to record minimum, maximum, and average readings on a single point, and an RS-232 interface setting. The Model 8912 also features a detachable probe for easy replacement, if necessary. The units can record and average up to 2 hours of data while displaying the continuous running average. Each unit includes hard carrying case, batteries, calibration data tag and instruction manual. This versatile meter is perfect for HVAC inspection, energy audits and balancing applications

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 

Seriees 100 Durablock Solid Plastic Portable Gag


 
Brand

DWYER USA

.
Model

Series 100

.


Series 100 Durablock Solid Plastic Portable Gage

Dwyer® solid plastic portable manometers are precision instruments in inclined and vertical (well-type) styles for the measurement of static pressure, vacuum or differential pressure. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrication of acrylic instruments.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 

admin