+(91)-9871034100
PHONE NO
07AOSPS8386M1ZM
GST NO

Category: Dwyer Stainless Steel Pitot Tube Wholesalers

Dwyer Stainless Steel Pitot Tube Wholesalers

Dwyer Stainless Steel Pitot Tube

 
 
Model Name/Number160 S
MaterialSS 304
Pressure ConnectionFemale NPT connections
Size1/8 inch
Temperature1500 degree F
Diameter4 to 432 inches
BrandDwyer USA


Dwyer Stainless Steel Pitot Tube is ideal to be used in the industrial operations with our precision manometers and Air Velocity Gages. Various Standard Sizes Are Available For Use in Ducts.

Features:

  • No Calibration Needed.
  • Precisely located, burr-free static Pressure Holes.
  • Hemispherical tip design, Best for Accuracy if imperfectly Aligned and Nearly Impossible to Damage.
  • Long lasting construction.
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included.
  • Use 1/8″ Models in ducts as small as 4″ and 5/16″ Models in Ducts 10″ or larger.
  • Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple.
  • ASME Design Meets AMCA & ASHRAE Specifications.


Applications:

  • Monitor or Control Air Velocity or Air Flow When Combined With Differential Pressure Gage, Switch, Or Transmitter


Details:

ModelDescription
160-12Stainless steel Pitot tube, 5/16″ dia., 12-5/8″ insertion length.
160-120Stainless steel Pitot tube, 5/16″ dia., 120″ insertion length.
160-168Stainless steel Pitot tube, 5/16″ dia., 168″ insertion length.
160-18Stainless steel Pitot tube, 5/16″ dia., 18-5/8″ insertion length.
160-216Stainless steel Pitot tube, 5/16″ dia., 216″ insertion length.
160-24Stainless steel Pitot tube, 5/16″ dia., 24-5/8″ insertion length.
160-36Stainless steel Pitot tube, 5/16″ dia., 36-5/8″ insertion length.
160-48Stainless steel Pitot tube, 5/16″ dia., 48-5/8″ insertion length.
160-60Stainless steel Pitot tube, 5/16″ dia., 60-5/8″ insertion length.
160-8Stainless steel Pitot tube, 5/16″ dia., 8-5/8″ insertion length.
160-96Stainless steel Pitot tube, 5/16″ dia., 96″ insertion length.
160-KITKit containing 160-18, 160-24, 160-36, 160-48, and FREE carrying case ($150 value)
160-UUniversal Pitot tube for permanent installation and connection to metal tubing, make any length with 3/4″ sch. 40 pipe, 3/4″ to 1/2″ reducing bushing and 1/4″ metal tubing.
166-12Pocket size Pitot tube, 1/8″ dia., 12″ insertion length, 3″ tip.
166-12-CFPocket size Pitot tube, 1/8″ dia., 12″ insertion length, 3″ tip, with 1/8″ male NPT compression fitting.
166-6Pocket size Pitot tube, 1/8″ dia., 6″ insertion length, 3″ tip.
166-6-CFPocket size Pitot tube, 1/8″ dia., 6″ insertion length, 3″ tip, with 1/8″ male NPT compression fitting.
167-12Pocket size Pitot tube, 1/8″ dia., 12″ insertion length, 1-1/2″ tip.
167-12-CFPocket size Pitot tube, 1/8″ dia., 12″ insertion length, 1-1/2″ tip, with 1/8″ male NPT compression fitting.
167-6Pocket size Pitot tube, 1/8″ dia., 6″ insertion length, 1-1/2″ tip.
167-6-CFPocket size Pitot tube, 1/8″ dia., 6″ insertion length, 1-1/2″ tip, with 1/8″ male NPT compression fitting.

Dwyer 160-96 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-96
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length96″

Dwyer 160-8 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-8
  • SS Pitot Tube w/Stiffener,5/16″ dia.,96″insertion
  • Order #: 160-96
  • Mfg #: 160-96

 

 

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 96”” Insertion Length
 

Dwyer 160-18 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-18
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length18-5/8″

Dwyer 160-18 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-18
  • SS Pitot Tube,5/16″dia.,18 5/8″ insertion
  • Order #: 160-18
  • Mfg #: 160-18 

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 18-5/8″ Insertion Length

Dwyer 160-168 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-168
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length216″


Dwyer 160-168 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-168
  • Stainless Steel Pitot Tube 5/16″ Diameter, 168″ Length
  • Order #: 160-168
  • Mfg #: 160-168

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks


Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 168″ Insertion Length

Dwyer 160-120 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-120
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length120″

Dwyer 160-120 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-120
  • Stainless Steel Pitot Tube 5/16″ diameter, 120″ length
  • Order #: 160-120
  • Mfg #: 160-120

 

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 120″ Insertion Length

Dwyer 160-8 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-8
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length8-5/8″

Dwyer 160-8 Stainless Steel Pitot Tube

  • Dwyer Instruments 160-8
  • Stainless Steel Pitot Tube 5/16″ Diameter, 8-5/8″ Length
  • Order #: 160-8
  • Mfg #: 160-8

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 8-5/8″ Insertion Length
 

Dwyer 160-60 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-60
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ dia.
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ dia.
BrandDWYER USA
Country of OriginMade in India
Insertion Length60-5/8″
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter

Dwyer 160-60 Stainless Steel Pitot Tube

  • Dwyer Instruments 160-60
  • SS Pitot Tube,5/16″dia.,60-5/8″ Insertion
  • Order #: 160-60
  • Mfg #: 160-60

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 60-5/8″ insertion length

Dwyer 160-48 Stainless Steel Pitot Tube
 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-48
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length48-5/8″

Dwyer 160-48 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-48
  • SS Pitot Tube,5/16″dia.,48-5/8″ insertion
  • Order #: 160-48
  • Mfg #: 160-48

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 48-5/8″ insertion length

Dwyer 160-36 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-36
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length36-5/8″

Dwyer 160-36 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-36
  • SS Pitot Tube,5/16″dia.,36-5/8″ insertion
  • Order #: 160-36
  • Mfg #: 160-36

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 36-5/8″ Insertion Length

Dwyer 160-24 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-24
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length24-5/8″

Dwyer 160-24 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-24
  • SS Pitot Tube,5/16″dia.,24 5/8″ insertion
  • Order #: 160-24
  • Mfg #: 160-24

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 24-5/8″ insertion length

Dwyer 160-216 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-216
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length216″

Dwyer 160-216 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-216
  • Stainless Steel Pitot Tube 5/16″ Diameter, 216″ Length
  • Order #: 160-216
  • Mfg #: 160-216

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 216″ Insertion Length

Dwyer Telescoping Stainless Steel Pitot Tube

 
 
MaterialStainless Steel
Size12.5 x 6.25 x 1.75 inches
Weight453.5 gm
Diameter1.8 inches
Tube Diameter1.8 inches
Flow Coefficient1.0
BrandDWYER


Telescoping Stainless Steel Pitot Tube is a Unique Air Flow Sensor which can Quickly and Easily be Adjusted for any Duct inersertion length.

Features/Benefits:

  • Adjustable length can replace up to 5 Fixed Length Pitot Tubes.
  • Stainless Steel construction resists corrosion


Applications:

  • Monitor or Control Air Velocity or Air Flow When Combined with Differential Pressure Gage, Switch or Transmitter Where varying lengths are needed.

Dwyer 160-12 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-12
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12-5/8″

Dwyer 160-12 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-12
  • SS Pitot Tube,5/16″dia.,12-5/8″ insertion length
  • Order #: 160-12
  • Mfg #: 160-12

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 12-5/8″ insertion length

Dwyer 160 Kit Pitot Tube Set Of Standard Tubes

 
 
Usage/ApplicationLaboratory
Model Name/NumberDwyer 160
MaterialStainless Steel
Size5/16″
Product TypeDwyer 160 Kit Pitot Tube Set Of Standard Tubes
Diameter5/16″
I Deal InNew Only
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Item Weight14.00 Pounds
Part Number160-KIT

Dwyer 160 Kit Pitot Tube Set Of Standard Tubes.

Applications: 

  • Pitot Tube Set of Standard Tubes
  • HVAC
  • Industrial & Commercial
  • Residential

The Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”, 36”, and 48” Dwyer Pitot tubes. These Pitot Tubes are Constructed out of a Durable Stainless steel with etched insertion depth graduations and silver soldered connections to help prevent leaks. They feature a low sensitivity to misalignment up to 15 degrees, require no calibration due to their ASHRAE tip design, and are rated up to 1500°F (815.5°C).

Manufacturer Specs

Dwyer 160-KIT Pitot Tube Set of Standard Tubes Specifications

Model in Kit        Insertion Length

  • 160-18          18-5/8??
  • 160-24          24-5/8??
  • 160-36          36-5/8??
  • 160-48          48-5/8??
 

Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case

 
 
BrandDwyer USA
Model Name/NumberDwyer 160-KIT Pitot Tube Kit
Usage/ApplicationIndustrial
MaterialStainless Steel
Weight14.00 Pounds
Diameter5/16″
Product TypeDwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case
Tube Diameter5/16″
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Part Number160-KIT

Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case

Applications 

  • Pitot Tube Set of Standard Tubes
  • HVAC
  • Industrial & Commercial
  • Residential

The Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”,36”,and 48” Dwyer Pitot Tubes.These Pitot Tubes are Constructed out of a Durable Stainless Steel With Etched insertion Depth Graduations and silver Soldered Connections to help prevent leaks.They Feature a low Sensitivity to Misalignment up to 15 degrees, require no Calibration due to their ASHRAE tip design,and are rated up to 1500°F (815.5°C).

Manufacturer Specs

Dwyer 160-KIT Pitot Tube Set of Standard Tubes Specifications

Model in Kit    Insertion Length

  • 160-18   18-5/8”
  • 160-24   24-5/8”
  • 160-36   36-5/8”
  • 160-48   48-5/8”

SPECIFICATION :

  • Brand:Dwyer USA
  • Model No:160-KIT
  • Our Model No:160KIT
  • Condition:NEW

KEY FEATURES :

  • Insertion Lengths:18-5/8″,24-5/8″,36-5/8″,48-5/8″
  • No Calibration Needed
  • Precisely located,burr-free static pressure holes
  • Hemispherical Tip Design,Best For Accuracy if Imperfectly Aligned and Nearly Impossible To Damage
  • Long lasting 304 SS Construction
  • Silver soldered connections for leak-proof operation
  • Extended Static Connection Helps Guide Tip Within Recommended 15° of Air Flow Direction
  • Inch Graduations on Sides of 160 Series to quickly Determine Exact insertion depth
  • Dwyer Air Velocity Calculator,Direct Reading Flow Charts and instructions included
  • Use 1/8″ Models in Ducts as Small as 4″,5/16″ Models in Ducts 10″ or Larger
  • Optional Mounting Gland of Split Flange Make Permanent Installation Fast and Simple Sold Separately
  • Meets ASME “Fluid Meters” 6th ed.ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999,and British Standard 1042
  • Includes Carrying Case

DETAILS :

The Dwyer 160-KIT Stainless Steel Pitot Tubes are Constructed From Corrosion Resistant Stainless Steel With Permanently etched insertion Depth Graduations for a Lifetime of Service.The Static Pressure Port is Parallel to the Sensing Tube to allow Quick,Easy Alignment of The Tube With Air Flow.The 160KIT has Probes With Insertion lengths of 18-5/8″,24-5/8″,36-5/8″,and 48-5/8″

INCLUDED

  • 1-18″ Pitot Tube
  • 1-24″ Pitot Tube
  • 1-36″ Pitot Tube
  • 1-48″ Pitot Tube
  • 1-Carrying Case

RELATED PRODUCTS

MODEL       DESCRIPTION

  • 160-12-CF-Dwyer 160-12-CF SS Pitot Tube,12-5/8″ Insertion Length,5/16″ Dia.Compression Fitting
  • 160-12-Dwyer 160-12 Stainless Steel Pitot Tube,12-5/8″ Insertion Length,5/16″ Diameter
  • 160-18-Dwyer 160-18 Stainless Steel Pitot Tube,18-5/8″ Insertion Length,5/16″ Diameter
  • 160-24-CF-Dwyer 160-24-CF SS Pitot Tube,24-5/8″ Insertion Length,5/16″ Dia.Compression Fitting
  • 160-24-Dwyer 160-24 Stainless Steel Pitot Tube,24-5/8″ Insertion Length,5/16″ Diameter
  • 160-36-Dwyer 160-36 Stainless Steel Pitot Tube,36-5/8″ Insertion Length,5/16″ Diameter
  • 160-48-Dwyer 160-48 Stainless Steel Pitot Tube,48-5/8″ Insertion Length,5/16″ Diameter
  • 160-60-Dwyer 160-60 Stainless Steel Pitot Tube,60-5/8″ Insertion Length,5/16″ Diameter
  • 160-8-Dwyer 160-8 Stainless Steel Pitot Tube,8-5/8″ Insertion Length,5/16″ Diameter
 

Dwyer 166-12 Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 166-12 Pocket
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-12 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip3″

Dwyer 166-12 Pocket Size Pitot Tube.

  • Dwyer Instruments 166-12
  • Pocket-Size Pitot Tube,12″ Insertion Tube/1/8″Diameter
  • Order #: 166-12
  • Mfg #: 166-12

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability:
 Ships in 5-6 Weeks 

Product Highlights

  • No calibration needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of “1
  • 5/16″ models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional mounting gland or split flange make permanent installation fast and simple
  • Pocket Size Pitot Tube
  • 1/8″ diameter
  • 12″ insertion length
  • 3″ tip

Dwyer 166-12 Stainless Steel Pitot Tube,12″ Insertion Length,1/8″ Diameter,3″ Tip

 
 
Model Name/NumberDwyer 166-12
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-12 Stainless Steel Pitot Tube,12″ Insertion Length,1/8″ Diameter,3″ Tip
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Insertion Length12″
Tip3″
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
MODELDwyer 166-12

Dwyer 166-12 Stainless Steel Pitot Tube,12″ Insertion Length, 1/8″ Diameter,3″ Tip

  • Brand:Dwyer USA
  • Model No:166-12
  • Our Model No:166-12 DWYER USA
  • Condition:NEW

KEY FEATURES :

  • Insertion Length: 12″
  • Tip: 3″
  • No calibration needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 SS construction
  • Silver soldered connections for leak-proof operation
  • Coefficient of “1”
  • 5/16″ models rated to 1500°F
  • Extended static connection helps guide tip within recommended 15° of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional mounting gland of split flange make permanent installation fast and simple (sold separately)
  • Meets ASME “Fluid Meters” 6th ed., ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999, and British Standard 1042

DETAILS :

The Dwyer 166-12 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The 16612 has a probe insertion length of 12″ and a tip of 3 inches. A universal model fits the user supplied 3/4″ schedule 40 pipe in any length.

RELATED PRODUCTS

MODEL       DESCRIPTION

  • 166-12-CF-Dwyer 166-12-CF SS Pitot Tube, 12″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
  • 166-6-CF-Dwyer 166-6-CF SS Pitot Tube, 6″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
  • 166-6-Dwyer 166-6 Stainless Steel Pitot Tube, 6″ Insertion Length, 1/8″ Diameter, 3″ Tip.
 

Dwyer Instruments 166-12-CF Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/Number166-12-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer Instruments 166-12-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip1-1/2″
Male NPT Compression Fitting1/8″

Dwyer Instruments  166-12-CF Pocket Size Pitot Tube

  • Pocket Size Pitot Tube,1/8″Dia.12″ Length,1/8″ Male NPT
  • Order #: 166-12-CF
  • Mfg #: 166-12-CF

Ideal for Use With our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of “1
  • 5/16″ models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ Models in Ducts as Small as 4″, 5/16″ Models in Ducts 10″ or Larger
  • Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple
  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 12″ Insertion Length
  • 1-1/2″ Tip
  • 1/8″ Male NPT Compression Fitting
 

Dwyer 166-6 Stainless Steel Pitot Tube 6″ Insertion Length 1/8″ Diameter 3″ Tip

 
 
BrandDwyer USA
Model Name/NumberDwyer 166-6
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-6 Stainless Steel Pitot Tube 6″ Insertion Length 1/8″ Diameter 3″ Tip
Tube Diameter1/8″
Country of OriginMade in India
Tip3″
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
MODELDwyer 166-6

Dwyer 166-6 Stainless Steel Pitot Tube 6″ Insertion Length 1/8″ Diameter 3″ Tip

  • Brand:Dwyer USA
  • Model No:166-6
  • Our Model No:166-6 DWYER USA
  • Condition:NEW

KEY FEATURES :

  • Insertion Length: 6″
  • Tip: 3″
  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 SS construction
  • Silver soldered connections for leak-proof operation
  • Coefficient of “1”
  • 5/16″ models rated to 1500°F
  • Extended static connection helps guide tip within recommended 15° of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional mounting gland of split flange make permanent installation fast and simple (sold separately)
  • Meets ASME “Fluid Meters” 6th ed., ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999, and British Standard 1042

DETAILS :

The Dwyer 166-6 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The 1666 has a probe insertion length of 6″ and a tip of 3 inches. A universal model fits the user supplied 3/4″ schedule 40 pipe in any length.

RELATED PRODUCTS


MODEL       DESCRIPTION

  • 166-12-CF-Dwyer 166-12-CF SS Pitot Tube, 12″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
  • 166-12-Dwyer 166-12 Stainless Steel Pitot Tube, 12″ Insertion Length, 1/8″ Diameter, 3″ Tip.
  • 166-6-CF-Dwyer 166-6-CF SS Pitot Tube, 6″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
 

Dwyer 167-6-CF Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-6-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-6-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
Tip1-1/2″
NPT Compression FittingWith 1/8″ Male

Dwyer 167-6-CF Pocket Size Pitot Tube



  • Dwyer Instruments 167-6-CF
  • Stainless Steel Pitot Tube 1/8″ Diameter, 1/8″ Male NPT
  • Order #: 167-6-CF
  • Mfg #: 167-6-CF

Ideal for Use With Our Precision Manometers and Air Velocity gages, Dwyer Pitot Tubes Are constructed From Corrosion Resistant Stainless Steel For a Lifetime Of Service. ASME design meets AMCA and ASHRAE Specifications for Maximum Accuracy over a wide Variety of Flow conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.



Availability:
 Ships in 5-6 Weeks



Product Highlights


  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″Insertion Length
  • 1-1/2″Tip
  • With 1/8″Male NPT Compression Fitting
 

Dwyer 167-6 Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-6
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-6 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDwyer USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
Tip1-1/2″

Dwyer 167-6 Pocket Size Pitot Tube

 

  • Dwyer Instruments 167-6
  • Stainless Steel Pitot Tube 1/8″ Dia., 6″ Length, 1.5″ Tip
  • Order #: 167-6
  • Mfg #: 167-6

 

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

 

Availability: Ships in 6-7 Weeks

 

Product Highlights

  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″ Insertion Length
  • 1-1/2″ Tip

 

 

Dwyer 167-12-CF Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-12-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-12-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip1-1/2″
NPT Compression FittingWith 1/8″ Male

Dwyer 167-12-CF Pocket Size Pitot Tube

  • Dwyer Instruments 167-12-CF
  • Stainless Steel Pitot Tube 1/8″ Diameter, 1/8″ Male NPT
  • Order #: 167-12-CF
  • Mfg #: 167-12-CF

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction Factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several Convenient mounting options are available for Permanent Installations.

Availability: Ships in 6-7 Weeks

Product Highlights

  • Pocket Size Pitot tube
  • 1/8″Diameter
  • 12″ Insertion Length
  • 1-1/2″ Tip
  • with 1/8″ Male NPT Compression Fitting

Dwyer 167-12 Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-12
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-12 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip1-1/2″

Dwyer 167-12 Pocket Size Pitot Tube

  • Dwyer Instruments 167-12
  • Stainless Steel Pitot Tube 1/8″ Dia., 12″ Length, 1.5″ Tip
  • Order #: 167-12
  • Mfg #: 167-12

Ideal for Use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability:
 Ships in 5-7 Weeks 

Product Highlights

  • Pocket Size Pitot Tube
  • 1/8″Diameter
  • 12″ Insertion Length
  • 1-1/2″ Tip

Dwyer 166-6-CF Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 166-6-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-6-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6”
Tip3”
NPT Compression Fitting1/8″ Male

Dwyer 166-6-CF Pocket Size Pitot Tube

  • Dwyer Instruments 166-6-CF
  • SS Pocket Size Pitot Tube,6″ Insertion,3″Tip,w/1/8″NPTM
  • Order #: 166-6-CF
  • Mfg #: 166-6-CF

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability:
 Ships in 5-6 Weeks

Product Highlights


  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of “1
  • 5/16″ models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to Quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts and Instructions Included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple
  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″ Insertion Length
  • 3″ Tip
  • 1/8″ Male NPT Compression Fitting
 

Dwyer 166-6 Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 166-6
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-6 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
Tip3″

Dwyer 166-6 Pocket Size Pitot Tube

  • Dwyer Instruments 166-6
  • Pocket-Size Pitot Tube, 1/8″dia 6″ Insertion Length
  • Order #: 166-6
  • Mfg #: 166-6

Ideal for use with our Precision Manometers and air velocity gages, Dwyer Pitot Tubes are Constructed From Corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability:
 Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and Nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for Leak-Proof Operation
  • ASME design meets AMCA and ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ Models in Ducts as Small as 4″, 5/16″ Models in Ducts 10″ or Larger
  • Optional mounting gland or split flange make permanent installation fast and simple
  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″ Insertion Length
  • 3″ Tip