+(91)-9871034100
PHONE NO
07AOSPS8386M1ZM
GST NO

Category: Dwyer Magnehelic Gauge Wholesale Suppliers India

Dwyer Magnehelic Gauge Wholesale Suppliers India

TRI2 Tridicator Gage

 
 
Diameter4-3/4″
Weight1 lb. 2 oz.
FinishedBaked dark gray enamel
Pressure Rating15 psi
Thread Pipe1/8″ NPT
Deep Size2-3/16″

The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank.
 

Series WDG Weatherproof Digital Pressure Gage

 
 
Display Type4-digit LCD (1-1/4 x 5/8″).
Power3 V CR123A
Size2.5″ O.D
Battery Life2 to 3 years typ.
Housing MaterialBDG: ABS plastic; WDG: Fiberglass reinforced PP plastic
Thermal Effect+-0.04% FS per degC.

The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.
 

Dwyer Series 2000:2060 Magnehelic Differential Pressure Gage

 
 
AccuracyPlus or minus 2%
Weight1 lb. 2 oz
Dimension4-3/4″ dia. x 2-3/16″ deep
Pressure Rating15 PSI (0,35 bar)
Connections1/8″ NPT
Ambient Temperature Range20deg to 140degF


Dwyer Instruments – Series 2000: 2060 Magnehelic Differential Pressure Gage

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

Select the Magnehelic gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Specifications
Service: Air and non-combustible, compatible gases (Natural Gas option available).
Wetted Materials: Call us at (888) 886-8185.
Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: ±2% of full scale throughout range at 70°F (21.1°C).
Pressure Range: 0-60.0″ w.c.
Pressure Limits: -20″ Hg. to 15 psig. (-0.677 bar to 1.034 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits: 20 to 140°F (-6.67 to 60°C).
Mounting Orientation: Diaphragm in vertical position.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Weight: 1 lb 2 oz (510 g).
Standard Accessories: Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread to rubber tubing adapters and three flush mounting adapters with screws.
Below are other pressure ranges available for Series 2000 Differential Pressure Gage:

Model
Number
Range
Inches
of Water
Model
Number
Range
Inches
of Water
2000-00N†••-.05-0-.220150-15
2000-00†••0-.2520200-20
2000-0†•0-.5020250-25
20010-1.020300-30
20020-2.020400-40
20030-3.020500-50
20040-4.020600-60
20050-5.020800-80
20060-6.021000-100
20080-8.021500-150
20100-10 
† These ranges calibrated for vertical scale position.
• Accuracy +/-3% •• Accuracy +/-4%

Dm-1000 Digi Mag Digital Differential Pressure And Flow Gages

 
 
Display Type4-digit LCD (digits: 0.60H x 0.33W).
Accuracy+-1% FS including linearity, hysteresis and repeatability; +-2% FS for ranges 1 in w.c. and below.
Weight1.18 lb (535 g).
Housing MaterialsGlass filled plastic.
Long Term Stability+-1% FS per year.
Power Supply9-24 VDC.


The DigiMag® SERIES DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Product Applications

  • Filter monitoring
  • Air velocity or flow
  • Blower vacuum monitoring
  • Fan pressure indication
  • Duct, room or building pressures
  • Clean room positive pressure indication



Models & Ordering

ModelDescription
DM-1102DigiMag® differential digital pressure gage, range 0-0.25″ w.c.
DM-1103DigiMag® differential digital pressure gage, range 0-0.5″ w.c.
DM-1104DigiMag® differential digital pressure gage, range 0-1″ w.c.
DM-1105DigiMag® differential digital pressure gage, range 0-2″ w.c.
DM-1107DigiMag® differential digital pressure gage, range 0-5″ w.c.
DM-1108DigiMag® differential digital pressure gage, range 0-10″ w.c.
DM-1109DigiMag® differential digital pressure gage, range 0-15″ w.c.
DM-1110DigiMag® differential digital pressure gage, range 0-25″ w.c.
DM-1111DigiMag® differential digital pressure gage, range 0-50″ w.c.
DM-1112DigiMag® differential digital pressure gage, range 0-100″ w.c.
DM-1122DigiMag® differential digital pressure gage, range 0.25-0-0.25″ w.c.
DM-1123DigiMag® differential digital pressure gage, range 0.5-0-0.5″ w.c.
DM-1124DigiMag® differential digital pressure gage, range 1-0-1″ w.c.
DM-1125DigiMag® differential digital pressure gage, range 2-0-2″ w.c.
DM-1127DigiMag® differential digital pressure gage, range 5-0-5″ w.c.
DM-1128DigiMag® differential digital pressure gage, range 10-0-10″ w.c.

Industrial Magnehelic Differential Pressure Gauges

 
 
Accuracy+-2%
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits20 to 140degF* (-6.67 to 60degC).
Pressure Limits-20 in hg

 

We are the leading manufacturer and exporter of a quality tested assortment of Industrial Magnehelic Gauges. Our range is widely used in checking the automatic valves and gas-air ratio controls, further in medical equipment also to monitor blood and respiratory pressures. Besides it is used to measure the fan and blow pressures, liquid levels and pressures in fluidic systems. Operated by a diaphragm our product is low in cost and is available in different specifications ranging from 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , and 0- 60 pA, 0-250 pA.

 

Uses:

  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely

Sensocon Magnehelic Gages -50 To 50 MMWC

 
 
Weight1 lb 2 oz 510 g
Media CompatibilityAir and compatible gasses
Warranty2 year
Accuracy+/-2%
Pressure Limit-20″ hg
Process Connection1/8″

Specification:
  • Dial size : 4′
  • Range -50 To 50 MMWC
  • Range – 0 – 6 MM WC
  • Range – 0 – 25 MM WC
  • Range – 0 – 50 MM WC
  • Range – 0 – 100 MM WC
  • Range – 0 – 60 PAC
 

Magnehelic Gauge

 
 
Diameter4-3/4″
Weight1 lb. 2 oz.
Deep2-3/16″
FinishedBaked dark gray enamel
Thread Size1/8″ NPT plugs
Pressure Rating15 PSI

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

  • Accuracy

  • High functionality

  • Long service life

 

Specifications:

  • We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge

  • Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%

  • Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others

  • We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas

  • In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover

  • These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

 

Technical Specifications:

  • Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)

  • Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option

  • HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)

  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only

  • Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)

  • Size: 4 (101.6 mm) Diameter dial face

  • Mounting Orientation: Diaphragm in vertical position, Consult factory for

  • Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back

  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)

  • Other position orientations

 

Applications:

  • Filter Status

  • Duct Static Pressure

  • Clean Room Pressure

  • Building Pressure

  • Fan and Blower Pressure

  • Paint Booths

  • Dust Collectors

  • Glove Box Pressure

  • Bubbler Systems

  • Cabinet Purging

 

Dwyer Digital Differential Pressure Gauge

 
 
Display Type4-digit LCD
ShapeRound
Accuracy2%
Size2.5″(63mm)
Thread Connection1/4G
Battery Power9 V
Dial MaterialAluminum


Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Digital Differential Pressure Gauges

 
 
Accuracy+-1% F.S
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face.
Display4-digit LCD
Temperature Limits0 to 140 DegreeF (-18 to 60 DegreeC).
Housing MaterialsGlass filled plastic


The series A1 Digital Differential Pressure Gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 differential pressure gauges utilize an extremely stable piezo resistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½” LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compare to mechanical gauges for a similar price.

Maximum Pressure:

  • 4″ w.c. and less = 2 PSI; 5″ w.c. and above = 10 PSI
  • Media compatibility:
  • Air and compatible non combustible, non corrosive gasses
  • Accuracy*:
  • Axxx0-xx – 1.00%; Axxx1-xx – 0.50%; Axxx2-xx – 0.25%
  • Temperature Ranges: Compensated and Operating:
  • -10° to 140°F (-23° to 60°C)
  • Thermal Effect*:
  • /- 0.012% FS/°F
  • Output Signal:
  • 4-20 mA (option)
  • Loop Resistance:
  • 750 Ω Max (for internally sourced power); 1800 Ω Max
  • (for externally sourced power of 36 VDC)


Specifications:

  • Universal 24-240 VAC or VDC
  • Housing Material:
  • Glass Filled Nylon
  • Enclosure Rating:
  • Designed to meet NEMA 4X face; with optional
  • cover the entire product is weatherproof

Differential Pressure Piston-Type Gage

 
 
BrandDWYER
Accuracy+-3-2-3%
Weight2.5″ = 0.60 lb (0.27 kg)
Size2.5″ (63 mm) 4.5″ (115 mm).
Material GradeSS316
Temperature Limits-40 to 200 DegreeF (-40 to 93 DegreeC).
Pressure Limits6000 psig

Differential Pressure Piston-Type Gage

Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4″ female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.
Product Applications
Filter pressure drop
Strainers
Pump performance testing
Heat exchanger pressure drop
<
 

Series PTGD Differential Pressure Piston-Type Gage

 
 
Accuracy+-3-2-3%
Weight2.5″ = 0.60 lb (0.27 kg)
Size2.5″ (63 mm) 4.5″ (115 mm).
Process Connections1/4″ female NPT end connections standard; 1/4″ female NPT back connections optional.
Mounting OrientationMount in any position.
Temperature Limits-40 to 200 DegreeF (-40 to 93 DegreeC).

The SERIES PTGD Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4″ female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.

Applications:
  • Filter pressure drop
  • Strainers
  • Pump performance testing
  • Heat exchanger
  • pressure drop
 

Photohelic Switch and Gauges

 

 
BrandDWYER
Measuring Range0-.50″ w.c.
Model Name/NumberSeries A3000
Usage/ApplicationIndustrial
MaterialAluminium
ColorBlack
Scale Range4″ (101.6 mm) dial face,5″ (127 mm) O.D. x 8-1/4″ (209.55 mm).

Magnehelic Gauge Sensor

 
 
BrandETI
Pack TypeBox
MaterialSS
FinishPolished
Size1-3/4″

Admired as first among the best, we provide clients with the premium quality of Magnehelic Gauge Sensor. The gauge sensor is used for air velocity monitoring applications and is manufactured by using latest technology. By following total quality management, the quality of Magnehelic gauge sensor is never compromised.

Features:
  • Excellent air velocity monitoring efficiency
  • Compact design
  • Easy to operate and maintain
 

Differential Pressure Gauge Nozzles

 
 
BrandETI
Usage/ApplicationHome Gardening
MaterialSteel
Size1/2″-3/4″
Packaging TypeBox

We are offering Differential Pressure Gauge Nozzles to our client.

Features:

  • Excellent air velocity monitoring efficiency
  • Compact design
  • Easy to operate and maintain
 

Magnehelic Gauge Nozzles

 
 
Usage/ApplicationHome Gardening
MaterialSteel
BrandETI
Size1/2″-3/6″
Packaging TypeBox

We are offering Magnehelic Gauge Nozzles to our client.

Features:

  • Excellent air velocity monitoring efficiency
  • Compact design
  • Easy to operate and maintain
 

Series UGJ Utility Gage

 
 
Accuracy+/- 2% F.S. at 21.1 DegreeC
Usage/ApplicationIndustrial
BrandDWYER
Weight1 lb. 2oz (510g)
Pressure60 Pa
Ambient Temperature7-60degC
ColorBlack
Connectiion1/8”NPT

The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi.
 

Dwyer Make Magnehelic Differential Pressure Gauge

 
 
AccuracyPlus or minus 2%
Diameter4-3/4″
Weight1 lb. 2 oz.
Deep2-3/16″
Connections1/8″ NPT
Pressure Rating15 psi

Our specialization lies in offering a commendable range of Dwyer Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices.

Features:
  • Compact size
  • Accuracy
  • Easy installation

Application:
  • Industrial Structure: Spring Pressure Gauge Connection Type: Radial Direction
  • Function: Local Indication Type Indicating  
  • Pressure Reference: Differential Pressure Gauge
 

Magnehelic Differential Pressure Gauge

 
 
BrandDWYER
Usage/ApplicationIndustrial
Accuracy+-2%
Weight1 lb 2 oz (510 g)
Size4 (101.6 mm)
Pressure Limits-20 Hg
HP Option35 psig

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas. In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover. These have exterior finish with grey color to withstand 168 hour salt spray corrosion test.


Specifications :

  • Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
  • Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option:
  • HP option: 35 psig (2.41 bar), 80 psig (5.52 bar).
  • Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only.
  • Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
  • Size: 4 (101.6 mm) Diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position, Consult factory for
  • Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
  • Other position orientations.
 

Dwyer Digital Differential Pressure Gauge

 
 
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face.
Process Connections1/8″ (3 mm) I.D. tubing.
Current Consumption5 mA maximum.
Type of Battery9V
Display4-digit LCD (Digits: 0.60″ H x 0.33″ W).

Experience of this domain, we provide clients with the premium quality of Dwyer Digital Differential Pressure Gauge. For regulation and monitoring of pressure of different industrial applications, the offered Dwyer digital differential pressure gauge is used. Simple calibration and thermal stability make the pressure gauge highly demanded.

Features:
  • Simplifies calibration with its digital push button
  • Four button operation reduces set up time
  • Easy to use and maintain
 

Dial Gages

 
 
Size4″ (101.6 mm)
Accuracy+-2%
Pressure Limit-20 in hg
Temperature Limit20 to 140degF
Process Connection1/8″
Weight510 g

Backed by years of experience of this domain, we present clients with the premium quality of Dial Gages. Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors. 

Features:
  • Excellent measurement accuracy
  • Easy to use
  • Requires less maintenance
 

Dwyer Air Velocity Sensors

 
 
BrandETI
Weight G5-20 gm
Pack TypeBox
MaterialSS
UsageCommercial


As a patron centric organization, we provide clients with the premium quality of Dwyer Air Velocity Sensors. Used for monitoring the air velocity of different industrial applications, the air velocity sensors are manufactured by using latest technology. Compact design, sturdy construction and high functionality, make the Dwyer air velocity sensors highly demanded.

Features:

  • Ideal for air velocity monitoring applications
  • Compact design
  • Easy operations and calibrations

Series UGI Utility Gage

 
 
ShapeRound
Accuracy2.5%
Packaging TypeBox
Battery IncludedNo
Gauge Connection1/8NPT
Gauge Dial Size21.5″(40mm)

1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales. The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators.