Aerosense Series ASG Differential Pressure Gauge Wholesaler

Aerosense Series ASG Differential Pressure Gauge Wholesaler, Uncategorized

Aerosense Series ASG Differential Pressure Gauge Wholesaler

Oct 29, 2021 by admin 0 Comments

Aerosense Model ASGC-02 INCH Differential Pressure Gauge Range 1-0-1 Inch

Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-04 INCH Differential Pressure Gauge Range 2-0-2 Inch

Model Number	ASGC-04
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10 INCH Differential Pressure Gauge Range 5-0-5 INCH

Brand	Aerosense
Model Name/Number	ASGC-10 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20 INCH Differential Pressure Gauge Range 10-0-10 Inch

Brand	Aerosense
Model Name/Number	ASGC-20 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30 INCH Differential Pressure Gauge Range 15-0-15 Inch

Brand	Aerosense
Model Name/Number	ASGC-30 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-15CM Differential Pressure Gauge Range 0-15 CM of Water

Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-20CM Differential Pressure Gauge Range 0-20 CM of Water

Model Number	ASG-20CM
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Brand	Aerosense
Measuring Range	0-25 CM of Water
Model Name/Number	ASG-25CM
Usage/Application	Industrial
Material	Mild Steel
Connection	New
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-50CM Differential Pressure Gauge Range 0-50 CM of Water

Brand	Aerosense
Model Name/Number	ASG-50CM
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-80CM Differential Pressure Gauge Range 0-80 CM of Water

Brand	Aerosense
Model Name/Number	ASG-80CM
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100CM Differential Pressure Gauge Range 0-100 CM of Water

Brand	Aerosense
Model Name/Number	ASG-100CM
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-150CM Differential Pressure Gauge Range 0-150 CM of Water

Brand	Aerosense
Model Name/Number	ASG-150CM
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-200CM Differential Pressure Gauge Range 0-200 CM of Water

Model Number	ASG-200CM
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250CM Differential Pressure Gauge Range 0-250 CM of Water

Model Number	ASG-250CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-300CM Differential Pressure Gauge Range 0-300 CM of Water

Model Number	ASG-300CM
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-6MM Differential Pressure Gauge Range 3 -0-3 mm

Model Number	ASGC-6MM
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10MM Differential Pressure Gauge Range 5 -0-5 mm

Model Number	ASGC-10MM
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20MM Differential Pressure Gauge Range 10 -0-10 mm

Model Number	ASGC-20MM
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Brand	Aerosense
Measuring Range	0.125-0-0.125 Inch
Model Name/Number	ASGC-00 inch
Usage/Application	Industrial
Material	Mild Steel
Connection	New
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differe

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60”C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-01 INCH Differential Pressure Gauge Range 0.5-0-0.5 INCH

Brand	Aerosense
Model Name/Number	ASGC-01inch
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-0 INCH Differential Pressure Gauge Range 0.25-0-0.25 Inch

Brand	Aerosense
Model Name/Number	ASGC-0 inch
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1KPA Differential Pressure Gauge Range .5-0-.5 KPA

Model Number	ASGC-1KPA
Usage/Application	Filter monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2KPA Differential Pressure Gauge Range 1-0-1 KPA

Model Number	ASGC-2KPA
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2.5KPA Differential Pressure Gauge Range 1.25-0-1.25 KPA

Model Number	ASGC-2.5KPA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-3KPA Differential Pressure Gauge Range 1.5-0-1.5 KPA

Model Number	ASGC-3KPA
Usage/Application	Filter monitoring
Brand	Aerosense
Weight	510 g
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-4CM Differential Pressure Gauge Range 2-0-2 CM

Model Number	ASGC-4CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10CM Differential Pressure Gauge Range 5-0-5 CM

Model Number	ASGC-10CM
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30CM Differential Pressure Gauge Range 15-0-15 CM

Model Number	ASGC-30CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60NPA Differential Pressure Gauge Range 10-0-50 PA

Model Number	ASG-60NPA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60PA Differential Pressure Gauge Range 0-60 PA

Model Number	ASG-60PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100PA Differential Pressure Gauge Range 0-100 PA

Model Number	ASG-100PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-125PA Differential Pressure Gauge Range 0-125 PA

Model Number	ASG-125PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250PA Differential Pressure Gauge Range 0-250 PA

Model Number	ASG-250PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-500PA Differential Pressure Gauge Range 0-500 PA

Model Number	ASG-500PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-750PA Differential Pressure Gauge Range 0-750 PA

Model Number	Series ASG
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2%
Temperature	20 to 140 degF
Size	4″
Housing Material	Die cast aluminium
Pressure Limits	20 in hg
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-1000PA Differential Pressure Gauge Range 0-1000 PA

Model Number	ASG-1000PA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-60PA Differential Pressure Gauge Range 30-0-30 PA

Model Number	ASGC-60PA
Usage/Application	Fan Pressure Indication
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Brand	Aerosense
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-100PA Differential Pressure Gauge Range 50-0-50 PA

Model Number	ASGC-100PA
Usage/Application	Fan Pressure Indication
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Brand	Aerosense
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-200PA Differential Pressure Gauge Range 100-0-100 PA

Model Number	ASGC-200PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-120PA Differential Pressure Gauge Range 60-0-60 PA

Model Number	ASGC-120PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-250PA Differential Pressure Gauge Range 125-0-125 PA

Model Number	ASGC-250PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-300PA Differential Pressure Gauge Range 150-0-150 PA

Model Number	ASGC-300PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Temperature Limits	20 to 140degF
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Process Connections	1/8″

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-500PA Differential Pressure Gauge Range 250-0-250 PA

Model Number	ASGC-500PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1000PA Differential Pressure Gauge Range 500-0-500 PA

Model Number	ASGC-1000PA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Category: Aerosense Series ASG Differential Pressure Gauge Wholesaler

Aerosense Series ASG Differential Pressure Gauge Wholesaler

Aerosense Model ASGC-02 INCH Differential Pressure Gauge Range 1-0-1 Inch

Aerosense Model ASGC-04 INCH Differential Pressure Gauge Range 2-0-2 Inch

Aerosense Model ASGC-10 INCH Differential Pressure Gauge Range 5-0-5 INCH

Aerosense Model ASGC-20 INCH Differential Pressure Gauge Range 10-0-10 Inch

Aerosense Model ASGC-30 INCH Differential Pressure Gauge Range 15-0-15 Inch

Aerosense Model ASG-15CM Differential Pressure Gauge Range 0-15 CM of Water

Aerosense Model ASG-20CM Differential Pressure Gauge Range 0-20 CM of Water

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Aerosense Model ASG-50CM Differential Pressure Gauge Range 0-50 CM of Water

Aerosense Model ASG-80CM Differential Pressure Gauge Range 0-80 CM of Water

Aerosense Model ASG-100CM Differential Pressure Gauge Range 0-100 CM of Water

Aerosense Model ASG-150CM Differential Pressure Gauge Range 0-150 CM of Water

Aerosense Model ASG-200CM Differential Pressure Gauge Range 0-200 CM of Water

Aerosense Model ASG-250CM Differential Pressure Gauge Range 0-250 CM of Water

Aerosense Model ASG-300CM Differential Pressure Gauge Range 0-300 CM of Water

Aerosense Model ASGC-6MM Differential Pressure Gauge Range 3 -0-3 mm

Aerosense Model ASGC-10MM Differential Pressure Gauge Range 5 -0-5 mm

Aerosense Model ASGC-20MM Differential Pressure Gauge Range 10 -0-10 mm

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Aerosense Model ASGC-01 INCH Differential Pressure Gauge Range 0.5-0-0.5 INCH

Aerosense Model ASGC-0 INCH Differential Pressure Gauge Range 0.25-0-0.25 Inch

Aerosense Model ASGC-1KPA Differential Pressure Gauge Range .5-0-.5 KPA

Aerosense Model ASGC-2KPA Differential Pressure Gauge Range 1-0-1 KPA

Aerosense Model ASGC-2.5KPA Differential Pressure Gauge Range 1.25-0-1.25 KPA

Aerosense Model ASGC-3KPA Differential Pressure Gauge Range 1.5-0-1.5 KPA

Aerosense Model ASGC-4CM Differential Pressure Gauge Range 2-0-2 CM

Aerosense Model ASGC-10CM Differential Pressure Gauge Range 5-0-5 CM

Aerosense Model ASGC-30CM Differential Pressure Gauge Range 15-0-15 CM

Aerosense Model ASG-60NPA Differential Pressure Gauge Range 10-0-50 PA

Aerosense Model ASG-60PA Differential Pressure Gauge Range 0-60 PA

Aerosense Model ASG-100PA Differential Pressure Gauge Range 0-100 PA

Aerosense Model ASG-125PA Differential Pressure Gauge Range 0-125 PA

Aerosense Model ASG-250PA Differential Pressure Gauge Range 0-250 PA

Aerosense Model ASG-500PA Differential Pressure Gauge Range 0-500 PA

Aerosense Model ASG-750PA Differential Pressure Gauge Range 0-750 PA

Aerosense Model ASG-1000PA Differential Pressure Gauge Range 0-1000 PA

Aerosense Model ASGC-60PA Differential Pressure Gauge Range 30-0-30 PA

Aerosense Model ASGC-100PA Differential Pressure Gauge Range 50-0-50 PA

Aerosense Model ASGC-200PA Differential Pressure Gauge Range 100-0-100 PA

Aerosense Model ASGC-120PA Differential Pressure Gauge Range 60-0-60 PA

Aerosense Model ASGC-250PA Differential Pressure Gauge Range 125-0-125 PA

Aerosense Model ASGC-300PA Differential Pressure Gauge Range 150-0-150 PA

Aerosense Model ASGC-500PA Differential Pressure Gauge Range 250-0-250 PA

Aerosense Model ASGC-1000PA Differential Pressure Gauge Range 500-0-500 PA