Pipe Fittings Valves

Elementor #2041

Oct 13, 2021 by admin 0 Comments

Automated Ball Valve

Rs 200 / Piece

Condition	New
Model Number	Series-3PBV
Brand	DWYER USA
Body	3 Way.
Line Size	1/2″ to 2″
End Connection	Female NPT or socket
Wetted Materials	Body & End Connections PVC; Ball & Stem PVC; Seat TFE; Stem Seal EPDM.
Modulating Input	4 to 20 mA.
Temperature	32 to 140 Degree F (0 to 60 Degree C).

Automated Ball Valve

The Series 3PBV is ideal for mixing or diverting services in industrial, chemical, turf and irrigation, and pool and spa applications, as well as for use with potable water. The valve features a 3-seat design for efficient automation, reinforced TFE seats and EPDM seals for longer life, and an all PVC construction for heavy weight durability at a lightweight cost. Valves also come standard with field selectable NPT or socket process connections.

The 3PBV is an economical automated valve package with either an electric or pneumatic actuator. Electrically actuated models are weatherproof, NEMA 4, powered by standard 115 VAC supply, and are available in either two-position or proportional control. Two-position actuators use the 115 VAC input to drive each of the valve ports open or closed, while the modulating actuator accepts a 4 to 20 mA input for infinite valve positioning. Actuator features include thermal overload protection to withstand stall conditions, visual position indication and a permanently lubricated gear train.

The pneumatic double acting actuator uses an air supply to drive each of the actuator ports. Spring return pneumatic actuators use the air supply to drive the valve stem one direction, and internally loaded springs return the valve to its original position. Also available is the SV3 solenoid valve to electrically switch the supply pressure between the air supply ports. Actuators are constructed of anodized aluminum and are epoxy coated for years of corrosion free service.

Specifications:

Pressure Limit : 1/2″ to 1″: 232 psi (16.0 bar) @ 73°F (23°C); 1-1/4″ to 2″: 150 psi (10.3 bar) @ 73°F (23°C) WOG. Vacuum: 29″ Hg. See Catalog page for curve.

Actuators:
Electric:

Power Requirements : 120 VAC, 50/60 Hz, single phase. Optional 220 VAC, 24 VAC, 12 VDC, and 24 VDC.
Power Consumption (Locked Rotor Current) : Two Position: 1/2″ to 1-1/2″: 0.55A; 2″: 0.75A. Modulating: 0.75A.
Cycle Time (per 90°) : Two Position: 1/2″ to 1-1/2″: 2.5 sec.; 2″: 5 sec. Modulating: 5 sec.
Duty Cycle : Two Position: 1/2″ to 1-1/2″: 75%; 2″: 25%. Modulating: 75%.
Enclosure Rating : NEMA 4. Optional NEMA 7 (Class 1, Div. II, Groups A, B, C, D).
Housing Material : Aluminum with thermal bonding polyester powder finish.
Temperature Limit : 0 to 150°F (-18 to 65°C).
Conduit Connection : 1/2″ female NPT.
Standard Features : Manual override and visual position indicator except modulating units.

Pneumatic :

Type : DA series is double acting and SR series is spring return (rack and pinion).
Normal Supply Pressure : 80 psi (5.5 bar).
Maximum Supply Pressure : 120 psig (8 bar).
Air Connections : DA1 to 2 and SR2 to 3: 1/8″ female NPT; all others: 1/4″ female NPT.
Air Consumption (per stroke) : DA1: 2.32 cu. in.; DA2 & SR2: 9.34 cu. in.; SR3: 17.21 cu. in.
Cycle Time (per 90°) : DA1: .03 sec.; DA2: .04 sec.; SR2: .09 sec.; SR3: .14 sec.
Housing Material : Anodized aluminum body and epoxy coated aluminum end caps.
Temperature Limit : -4 to 180°F (-20 to 82°C).
Accessory Mounting : NAMUR standard.
Standard Features : Visual position indicator.

Additional Information:

Item Code: Series-3PBV

Current to Pressure Transducer

Rs 14,000 / Piece

Temp.	-20 to 140 Degree F (-30 to 60 Degree C).
Weight	2.1 lb (0.94 kg).
Model No.	Series-IP
Input Signal	4-20 mA.
Hysteresis	1% of span.
Repeatability	0.5% of span
Pressure Connections	1/4″ female NPT
Electrical Connection	1/2″ female NPT

Current to Pressure Transducer

The Series IP Current to Pressure Transducer converts a current input signal to a linearly proportional pneumatic output pressure. The features include built-in volume booster, low air consumption, field reversible (provides output which is inversely proportional to the input signal) and flexible zero and span adjustments. The rugged NEMA 4X enclosure allows splashdown and outdoor installation. The IP can be used for applications that require operation of valve actuators, pneumatic valve positioners, damper and louver actuators, final control elements, relays, air cylinders, web tensioners, clutches and brakes.

Specification:

Service : Oil free, clean dry air filtered to 40 microns.
Input Impedance : IP-42: 180 ohms; IP-43 and IP-44: 220 ohms.
Air Pressure : Minimum: 3 psig (21 kPa) above maximum output; Maximum: 100 psig (700 kPa).
Linearity : <±0.75% of span.
Supply Pressure Sensitivity : <±0.1% of span per psig (<±0.15% of span per 10 kPa).
Power Requirements : Loop powered.
Air Consumption : 0.03 SCFM (0.5 m³/h) typical.
Output Capacity : 4.5 SCFM (7.6 m³/h ANR) at 25 psig (175 kPa) supply; 12 SCFM (20 m³/h) at 100 psig (700 kPa) supply.
Relief Capacity : 2 SCFM (3.4 m³/h) at 5 psig (35 kPa) above 20 psig (140 kPa) setpoint.

Additional Information:

Item Code: Series-IP

Electro Pneumatic Transducer

Rs 9,000 / Piece

Weight	1.0 lb (0.45 kg).
Storage Temperature)	25 to 150 Degree F (4 to 65 Degree C).
Model	Series-EPT-1
Application	Industrial
Brand	DWYER USA
Air Supply	40 psig (276 kPa) maximum.
Pressure Drop	0.1 psig (0.7 kPa)
Power Requirement	18-28 VAC/VDC
Current Consumption	150 mA.

Electro Pneumatic Transducer

The Series EPT-1 incorporates a quiet low-wattage poppet valve and pressure sensor to measure and adjust the branch line pressure proportional to the input. This unit has no air consumption and is immune to mounting orientation and supply line pressure fluctuations. The EPT-1M1 and EPT-1M2 incorporate a manual override switch, and in the manual mode, the pressure can be increased or decreased with two pushbutton switches. This feature is most desirable for check out/commissioning and manual operation in case of controller failure. Universal 24 VAC/24 VDC supply voltage and field selectable 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC inputs ensure single unit compatibility with most systems. The unique steel chassis design substantially reduces the overall size of the unit and, at the same time, provides for ease of installation in a control panel directly or with a snap track. A precision gage is provided for the branch line pressure. A rugged aluminum manifold, brass barb fittings, floating poppet solenoid valve, silicon pressure sensor, and high performance electronics are some of the features which make the Series EPT-1 the most reliable electro-pneumatic transducer in the industry

Additional Information:

Item Code: Series-EPT-1

Linear Smart Positioner

Rs 70,000 / Piece

Weight	3.3 lb (1.5 kg); SS models 6.4 lb (2.9 kg).
Model Number	Series-185
Temperature Range	-22 to 185 Degree F (-30 to 85 Degree C)
Brand	DWYER USA
Application	Industrial
Input Signal	4 to 20 mA DC.
Enclosure Material	Aluminum or 316SS.
Air Supply	35 to 116 psi (2.4 to 8 bar).
Air Connection	1/4″ NPT.
Gage Connection	1/8″ NPT
Conduit Connection	1/2″ NPT.
Stroke	0.5 to 6″ (10 to 150 mm).
Enclosure Rating	NEMA 4X (IP66)

Linear Smart Positioner

Proximity Series 185 Smart Positioners combine an easy to use, high performance unit with a low price. Series 185 models accurately control the valve stroke of linear motion valves, such as W.E. Anderson globe valves, according to an input signal of 4 to 20 mA from the controller. Its rugged, durable aluminum or available stainless steel construction makes it ideal for harsh environments. The NEMA 4X (IP66) enclosure rating protects the highly efficient microprocessing unit inside the Smart Positioner. An analog feedback signal is outputted to stabilize any valve system, and easy to use functions such as auto calibration ensure the accuracy of the unit. Low air consumption reduces operating cost, but does not sacrifice the performance of the Smart Positioner. The compact design of this unit makes it easy to use with any size actuator. Smart Positioners feature a LCD screen attached to the outer surface of the unit, allowing for an easy inspection of the positioner condition while in the field. Available in user selectable single or double action, with HART® communication as standard. In the event that the 4-20 mA input signal is lost the 185 will fail in place.

Specification:

Input Impedance : 460 Ω max @ 20 mA DC.
Linearity : ±0.5% FS.
Hysteresis : ±0.5% FS.
Sensitivity : ±0.2% FS.
Repeatability : ±0.3% FS.
Air Consumption : .0004 scfm (.01 LPM) at 20 psig (1.4 bar) supply.
Flow Capacity : 2.1 scfm (60 LPM) at 20 psig (1.4 bar) supply.

Features:

LCD allows the user to directly check the positioner condition in the field.
Endures severe vibration.
Operates normally regardless of changes in supply pressure during operation.
Simple to use auto calibration.
Easily equipped on small actuators because of its small size.
Low air consumption reduces operating cost.
Can be used in low voltage (8.5 V), leaving no limitation in controller.
HART®communication available for configurating parameters or monitoring the valve position.
Analog feedback signal (4 to 20 mA).
The adjustment of valve characteristics (linear, quick open, equal percentage) available.
Tight shut-close and shut-open can be set in the programming menu.
PID parameters can easily be adjusted in the field without additional communicator.
Split ranges such as 4 to 12 mA, with 12 to 20 mA available.
The positioner can manually actuate the valve or damper.
An air filter regulator can be mounted directly to the positioner

Other Details:

Model	Description
185EL-S1	Smart positioner, Hart® communication, single action, aluminum enclosure
185EL-S1SS	Smart positioner, Hart® communication, single action, stainless steel enclosure

Additional Information:

Item Code: Series-185

Needle Valve 1 Valve Block Manifold

Rs 2,000 / Piece

Temperature	464 Degree F (240 Degree C).
Place Of Origin	DELHI
Brand	DWYER USA
Condition	New
Power	Manual
Material	Steel
End Connections	NPT
Wetted Materials	316 SS and PTFE packing.
Pressure Limit	6000 psi (431 bar) 200 Degree F (93 Degree C). 4000 psi (276 bar) 464 Degree F (240 Degree C).
Materials	Handle 316 SS.

Needle Valve 1 Valve Block Manifold

Series HNV Block Manifold is a barstock style needle valve that is designed for isolating instruments from liquids or gases. The valve series features fine threading and large seat area to ensure tight shutoff. Wetted materials are 316 SS and PTFE making these ideal for use with corrosives. The HNV has been tested to assure vibration and thermal stability. Body includes a lock pin to prevent accidental bonnet disengagement. The HNV is available in male x female and female x female connections from 1/8″ to 1″. Tee handle is constructed of 316 SS and allows low torque operation.

Features:

Solid Barstock Body
Panel Mountable
Bubble Tight Shutoff
Bonnet Lock Pin

Additional Information:

Item Code: Series-HNV

Position Indicator Transmitter

Rs 1,300 / Piece

Output Signal	4 to 20 mA.
Accuracy	+/-0.5% of full span. Optional +/-0.25% of full span.
Brand	DWYER USA
Current Consumption	50 mA.
Condition	New
Power Rating	1.5 watt maximum.
Power Requirement	5 to 30 VDC.

Needle Valve 1 Valve Block Manifold

Position Indicator Transmitter

The Proximity Mark Series is a line of position indicators with a selection of various output options. Four model styles make up the Mark series to cover almost any application. Standard models in the Mark Series have visual position indicators and are weatherproof, explosion-proof, and submersible. A large variety of outputs are available to fit specific applications. There is a choice of 1 to 6 switch outputs of 14 varieties including inductive sensors, high temperature switches, gold contact switches, hermetically sealed switches, and high current switches. Besides the switch outputs, the Series offers potentiometer outputs, transmitters, and HART® Communications. The units are purchased for either direct drive applications, such as rotary valves, or lever drive applications, such as linear valves. Adjustable visual indicator is standard on direct drive units that displays OPEN/CLOSED status and degrees.

A magnetic drive that completely seals the switch compartment from the atmosphere for maximum leak protection is utilized in the Mark 1. The Mark 3 uses the same magnetic drive of the Mark 1, but it can be used for multi-turn applications with 1 to 25 revolutions, such as gate valves. A through shaft drive is incorporated in the Mark 4 making the unit a lower cost alternative to the Mark 1 for applications that are not as demanding.

Features:
MARK 1

Features a magnetic coupling that isolates the switch compartment, completely sealing the unit from the surrounding atmosphere for maximum hazard and leak protection.
EZset cams on switch models provide simple set point adjustment.
Flexible design allows multiple switches and transmitter options.

Ideal for corrosive environments.

MARK 3

Features a magnetic coupling that isolates the switch compartment, completely sealing the unit from the surrounding atmosphere for maximum hazard and leak protection.
Multi-Turn models that can provide switch signals between 1 and 25 revolutions, and transmitter models for up to 10 revolutions without gear reduction.
Flexible design allows multiple switches and transmitter options.
Ideal for corrosive environments.

MARK 4

Thru-Shaft design that features a 1″ bearing for long life and o-rings to seal the switch compartment for hazard, corrosion, and leak protection.
EZset cams on switch models provide simple set point adjustment.
Flexible design allows multiple switches and transmitter options.
A lower cost alternative to the Mark 1 Series for less demanding applications.

Options:

JUNCTION PACKAGE: Complete factory assembled packages combine visual indication, solenoids, switches and transmitter in a single convenient UL, CSA, ATEX, or SAA certified assembly which saves labor and reduces cost. The simple package is shipped ready for installation, complete with a custom designed mounting kit for your specific application. Many options are available such as painted aluminum, epoxy coated aluminum or stainless steel housings including a standard 3/4″ NPT conduit entrance and choice of 1 or 2 additional 1/2″ NPT conduit entrances. The optional conduit entrances are drilled and tapped in the base of the position indicator housing and solenoid valves are screwed into the entrances. 22 to 16 AWG wire leads from solenoids, switches and optional transmitter are terminated in prelabeled, easy-access terminal strips protected inside the housing. Note: UL, CSA, ATEX or SAA approval requires complete package assembly by Proximity. Consult the factory for recommended UL, CSA, ATEX or SAA approved solenoid valve options.

Additional Information:

Item Code: Series-Mark
Port of Dispatch: undefined

Additional Information:

Item Code: Series-Mark

Self Acting Temperature Control Valve

Rs 6,500 / Piece

Brand	Dwyer Usa
Pressure	250 psi (17.24 bar)
Condition	New
Model Number	Series-38R
Place Of Origin	DELHI
Temperature	410 Degree F (210 Degree C)
Connection	Threaded,malleable iron union ends.
Single Seat	1/2″ to 2″
Trim Style	Modified linear.
Wetted Materials	Body bronze; Trim 316 stainless steel; Packing PTFE; Union iron.

Self Acting Temperature Control Valve

Series 38R Self-Acting Temperature Control Valves require no external power sources and are ideal for regulating the temperature of tanks, process streams and various types of industrial equipment. The actuators are made with a rugged die-cast aluminum housing with a fully enclosed bellow assembly and internal over-range protection. Valves are offered in 1/2″ through 6″ connection sizes and 1/8″ through 6″ port sizes. The valve bodies are available in single-seated direct or reverse-acting, double-seated direct or reverse-acting, and 3-way designs with four choices of body material: bronze, cast-iron, cast steel, and 316 stainless steel. Actuators are available with or without indicating dials or in Fail-Safe. Non-indicating actuators feature a lower profile and should be implemented where space constraints may be an issue while the indicating actuator allows the operator to verify the process temperature and aid in temperature adjustment. Fail-Safe actuators are designed to cause the valve to fail in the safe control position (open in cooling application, closed in a heating application) should some accidental damage occur to the terminal system, resulting in loss of pressure charge. Also available with the Series 38R are a wide range of capillaries, bulbs, and thermowells.

Specification:
Two-way Bronze Valve:

Double Seat 3/4″ to 2″
Wetted Materials: Body: bronze; Trim: 316 stainless steel; Packing: PTFE; Union: iron.
Trim Style: Modified linear.
Connection: Threaded, malleable iron union ends.
Pressure and Temperature Limits: 250 psi (17.24 bar) @ 410°F (210°C).

Two Way Cast Iron Valve Body:

Double Seat 2-1/2″ to 6″
Wetted Materials: Body: cast iron; Trim: 316 stainless steel; Packing: PTFE.
Trim Style: Modified linear.
Connection: Class 125 flanged.
Pressure and Temperature Limits: 125 psi (8.62 bar) @ 350°F (149°C).

Two Way Cast Steel Valve Body:

Single Seat 3/4″ to 1″
Wetted Materials: Body: cast steel; Trim: 316 stainless steel; Packing: PTFE.
Trim Style: Modified linear.
Connection: Threaded.
Pressure and Temperature Limits: 250 psi (17.24 bar) @ 410°F (210°C).

Two Way Stainless Steel Valve Body:

Single Seat 1/2″ to 2″
Wetted Materials: Body: 316 stainless steel; Trim: 316 stainless steel; Packing: PTFE.
Trim Style: Modified linear.
Connection: Threaded.
Pressure and Temperature Limits: 250 psi (17.24 bar) @ 410°F (210°C).

Two Way Bronze Fail Safe Valve Body:

Single Seat 1/2″
Wetted Materials: Body: bronze; Trim: 316 stainless steel; Packing: PTFE; Union: iron.
Trim Style: Modified linear.
Connection: Threaded, malleable iron union ends.
Pressure and Temperature Limits: 250 psi (17.24 bar) @ 410°F (210°C).

Two Way Bronze Fail Safe Valve Body:

Double Seat 3/4″ to 2″
Wetted Materials: Body: bronze; Trim: 316 stainless steel; Packing: PTFE; Union: iron.
Trim Style: Modified linear.
Connection: Threaded, malleable iron union ends.
Pressure and Temperature Limits: 250 psi (17.24 bar) @ 410°F (210°C).

Additional Information:

Item Code: Series-38R

3 Piece NPT Stainless Steel Ball Valve

Rs 1,200 / Piece

Model Number	Series-WE02
Place Of Origin	DELHI
Brand	DWYER USA
Temperature	-20 to 392 Degree F (-29 to 200 Degree C).
Application	Industrial
Usage/Application	Gas or liquid flow control
Condition	NEW
Body	3 Piece.
Line Sizes	1/2 to 3″ .
End Connections	Female NPT.
Pressure Limits	28″ Hg to 1000 psi (-0.7 to 69 bar) up to 250 Degree F.
Service	Compatible liquids and gases.

3 Piece NPT Stainless Steel Ball Valve

The Series WE02 incorporates a full port 3-piece SS ball valve for great flow rates with minimal pressure drop. The valve features a blowout proof stem for added safety, reinforced PTFE seats and seals for longer life, and a 316 SS (ASTM CF8M) ball for better performance. Actuators are direct mounted creating a compact assembly for tight spaces. Limit switches are able to be mounted directly to the valves allowing for remote position indication.

The Series WE02 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages and two-position or modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4 to 20 mA input for valve positioning. Actuators feature thermal overload protection and permanently lubricated gear train.

The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve, and internally loaded springs return the valve to the closed position. Also available is the SN solenoid valve to electrically switch the air supply pressure between the air supply ports for opening and closing the valve. Actuators are constructed of anodized and epoxy coated aluminum for years of corrosion free service.

Features:

Capable of being configured to fit any application
Limit switches can be mounted to manual valves for remote monitoring
Vented ball to reduce operating torque
Weatherproof or explosion-proof electric actuators
Double acting or spring return anodized aluminum pneumatic actuators
3-piece design for each replacement of seals
Full port design reduces the pressure drop across the valve

Applications:

Gas or liquid flow control
Ideal for quick bubble tight shut-off

Other Details:

Actuators
Pneumatic “DA” and “SR” Series:

Type : DA series is double acting and SR series is spring return (rack and pinion).
Normal Supply Pressure : DA: 40 to 115 psi (2.7 to 7.9 bar); SR: 80 psi (5.5 bar).
Maximum Supply Pressure : 120 psi (8.6 bar).
Air Connections : DA01: 1/8″ female NPT; DA02 to DA05: 1/4″ female NPT; SR02 to SR07: 1/4″ female NPT.
Housing Material : Anodized aluminum body and epoxy coated aluminum end caps.
Temperature Limits : 40 to 176°F (-40 to 80°C).
Accessory Mounting : NAMUR standard.

Electric “TD” and “MD” Series:

Power Requirements : 110 VAC, 220 VAC, 24 VAC or 24 VDC (MD models not available in 24 VDC).
Cycle Time (per 90°) : TD01: 4 s; MD01: 10 s; TD02 and MD02: 20 s; TD03 and MD03: 30 s.
Duty Rating : 85%.
Enclosure Rating : NEMA 4X (IP67).
Housing Material : Powder coated aluminum.
Temperature Limits : -22 to 140°F (-30 to 60°C).
Electrical Connection : 1/2″ female NPT.
Modulating Input : 4 to 20 mA.

Electric “TI” and “MI” Series:

Power Requirement : 110 VAC, 220 VAC, 24 VAC or 24 VDC.
Enclosure Rating : NEMA 7, designed to meet hazardous locations: Class I, Group C & D; Class II, Group E, F & G; Division I & II.
Housing Material : Powder coated aluminum.
Temperature Limits : -40 to 140°F (-40 to 60°C).
Electrical Connection : 1/2″ female NPT.
Modulating Input : 4 to 20 mA.

Additional Information:

Item Code: Series-WE02

3 Valve Block Manifold

Rs 1,500 / Piece

Condition	New
Material Grade	Handle 304 SS
Temperature	464 Degree F (240 Degree C).
Material	Handle 304 SS
Brand	DWYER USA
Model	Series-BBV-1
Wetted Materials	Body, stem, valve assembly 316 SS; Stem packing PTFE.
Pressure Limit	6000 psi (400 bar).

3 Valve Block Manifold

Series BBV-1 Block Manifold can be used over a broad range of industrial applications including oil refineries, nuclear power stations, petrochemical processing, and more. The Series BBV-1 body is forged from 316 stainless steel bar stock and designed to withstand repeated open and close operations. Suited to control oil, water, toxic fluids, chemicals, air, and steam; the 3-valve block manifold has (2) isolate and (1) equalizing valves. Each valve stem is precision machined with hard seats to reduce operating torque.

The flanged model is designed to mount to an industrial differential pressure transmitter. The BBV-1F comes with four 7/16-20 UNF mounting bolts and two PTFE gaskets, and the BBV-1D comes with eight 7/16-26 UNF mounting bolts and four PTFE gaskets.

Other Details:

Model	Description
BBV-1	3-valve block manifold.
BBV-1B	Mini 3-valve block manifold
BBV-1D	Double flanged 3-valve block manifold, 316SS
BBV-1F	Flanged 3-valve block manifold.
BBV-1M	Multiplanar 3-valve manifold

Additional Information:

Item Code: Series-BBV-1

3 Way NPT Stainless Steel Ball Valve

Rs 1,500 / Piece

Temperature	-20 to 392 Degree F (-29 to 200 Degree C).
Automation Grade	Manual
Condition	New
Use	Ideal for quick bubble tight shut-off
Brand	DWYER USA
Model Number	Series-WE31
Usage/Application	Gas or liquid flow control
Application	Mixing or diverting liquids and gases
Pressure	28″ Hg to 1000 psi (-0.7 to 69 bar) up to 250 Degree F.
Place Of Origin	DELHI
Body	3 Way.
Line Sizes	1/2 to 2″.
End Connections	Female NPT.

3 Way NPT Stainless Steel Ball Valve

The Series WE31 incorporates a full port 3-way SS ball valve for great flow rates with minimal pressure drop. The valve features a blowout-proof stem for added safety, reinforced PTFE seats and seals for longer life, and a 316 SS (ASTM CF8M) ball for better performance. Actuators are direct mounted creating a compact assembly for tight spaces. Limit switches are able to be mounted directly to the valves allowing for remote position indication.

The Series WE31 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages and two-position or modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4 to 20 mA input for valve positioning. Actuators feature thermal overload protection and permanently lubricated gear train.

Applications:

Gas or liquid flow control
Ideal for quick bubble tight shut-off
Mixing or diverting liquids and gases

Other Details:

Actuators
Pneumatic “DA” and “SR” Series:

Type : DA series is double acting and SR series is spring return (rack and pinion).
Normal Supply Pressure : DA: 40 to 115 psi (2.7 to 7.9 bar); SR: 80 psi (5.5 bar).
Maximum Supply Pressure : 120 psi (8.6 bar).
Air Connections : DA01: 1/8″ female NPT; DA02 to DA05: 1/4″ female NPT; SR02 to SR07: 1/4″ female NPT.
Housing Material : Anodized aluminum body and epoxy coated aluminum end caps.
Temperature Limits : 40 to 176°F (-40 to 80°C).
Accessory Mounting : NAMUR standard.

Electric “TD” and “MD” Series:

Power Requirements : 110 VAC, 220 VAC, 24 VAC or 24 VDC (MD models not available in 24 VDC).
Cycle Time (per 90°) : TD01: 4 s; MD01: 10 s; TD02 and MD02: 20 s; TD03 and MD03: 30 s.
Duty Rating : 85%.
Enclosure Rating : NEMA 4X (IP67).
Housing Material : Powder coated aluminum.
Temperature Limits : -22 to 140°F (-30 to 60°C).
Electrical Connection : 1/2″ female NPT.
Modulating Input : 4 to 20 mA.
Standard Features : Manual override, position indicator, and TD models come with two limit switches.

Electric “TI” and “MI” Series:

Power Requirement : 110 VAC, 220 VAC, 24 VAC or 24 VDC.
Enclosure Rating : NEMA 7, designed to meet hazardous locations: Class I, Group C & D; Class II, Group E, F & G; Division I & II.
Housing Material : Powder coated aluminum.
Temperature Limits : -40 to 140°F (-40 to 60°C).
Electrical Connection : 1/2″ female NPT.
Modulating Input : 4 to 20 mA.
Standard Features:Position indicator and two limit switches

Additional Information:

Item Code: Series-WE31

Butterfly Valve

Rs 2,800 / Piece

Brand	DWYER USA
Operator	2 to 6″ 10-position locking hand lever; 8 to 12″ manual gear.
Pressure	225 psi (15.5 bar).
Model	Series-BFV
Condition	New
Place Of Origin	DELHI
Body	2 Way, wafer or lug butterfly.
Line Sizes	2 to 12″.
Bearings	Nylatron

Butterfly Valve

The Series WE20 is offered in lug or wafer body styles and is equipped with a PTFE or EPDM liner. The most critical aspect of the Series WE20 Butterfly Valves is the cartridge seat design, which alleviates installation problems associated with common “dove tail design” seats. Valve torques are lower and more consistent as the seat dynamics are not dependent on being coupled between two flanges. Precision machining of the disc and body allow the cartridge design to maintain a tighter disc to seat tolerance, providing a perfect low torque seal each and every time the valve is cycled. The seat to disc seal is independent of flange support and capable of full rated dead end service. Actuators are directly mounted creating a compact assembly for tight spaces. Limit switches are able to be mounted directly to the valves allowing for remote position indication. The Series WE20 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages and two-position or modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4-20 mA input for valve positioning. Actuators feature thermal overload protection and permanently lubricated gear train. The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve, and internally loaded springs return the valve to the closed position.

The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve and internally loaded springs return the valve to the closed position. Also available is the SV3 solenoid valve to electrically switch the air supply pressure between the air supply ports for opening and closing the valve. Actuators are constructed of anodized and epoxy coated aluminum for years of corrosion free service

Features:

Machined flats attach disc/stem – no pins
Phenolic backed cartridge seat design for extended service and ease of replacement
Extended neck for insulation – no fabricated extensions required
Capable of being configured to fit any application
Limit switches can be mounted to manual valves for remote monitoring

Specifications Valve:

End Connections : Lug and wafer pattern designed for flanges that are ANSI Class 125 (B16.1) and ANSI Class 150 (B16.5) dimension.
Wetted Materials : Body Material: Ductile iron; Disc: 316 SS; Seat: EPDM or PTFE; O-ring: EPDM; Stem: 410 SS.
Temperature Limits : Disc: EPDM: -50 to 250°F (-46 to 121°C); PTFE: 0 to 300°F (-18 to 149°C).

Actuators:
Pneumatic “DA” and “SR” Series :

Type : DA series is double acting and SR series is spring return (rack and pinion).
Normal Supply Pressure : DA: 40 to 115 psi (2.7 to 7.9 bar); SR: 80 psi (5.5 bar).
Maximum Supply Pressure : 120 psi (8.6 bar).
Air Connections : DA03 thru DA11: 1/4″ FNPT; SA03 thru SR11: 1/4″ FNPT.
Housing Material : Anodized aluminum body and epoxy coated aluminum end caps.
Temperature Limits : 40 to 176°F (-40 to 80°C).
Accessory Mounting : NAMUR standard.

Additional Information:

Item Code: Series-BFV

Detector Position Sensor

Rs 1,000 / Piece

Model	Series-DT
Brand	DWYER USA
Temperature Deg Celsius	-40 to 163 Degree F (-40 to 73 Degree C).
Condition	New
Response Time	3.0 msec
Weight	0.32 lb (145 g); 0.45 lb (204 g) with actuator.
Switch Type	Tungsten, SPDT, Form C.
Electrical Rating	3A at 125 VAC, 3A at 30 VDC.
Housing	316 Stainless Steel.
Conduit	1/2″-14 female NPT.

Detector Position Sensor

The Series DT Detector Position Sensors are reliable, magnetically actuated, SS, completely interchangeable with competitive units. AC or DC for user friendly operation. They have no moving parts, eliminate costly seal fittings and offer enhanced reliability by eliminating arcing. Unintentional actuation by metals is not a problem. The sensor consists of a durable hermetically sealed reed switch potted in a SS housing and a separate 316 SS magnetic actuator bolt. As the actuator moves within the sensing range of the sensor, the magnet in the actuator changes the state of reed switch contacts inside the sensor. This either opens or closes a circuit depending on wiring configuration. Sensing distance is 0.1″ (2.54 mm) for the standard target. Greater sensitivity of a larger magnetic target increases the sensing distance to 0.5″ (12.7 mm).

The detector is excellent for hazardous and corrosive environments, solid state and intrinsically safe applications. A detector may be mounted in any position. For installation in hazardous locations, be sure to check local and national electrical codes.

Features:

Excellent for hazardous and corrosive environments
Can be mounted in any position
Designed to NEMA 1, 3, 4, 4X, 6, 7, 9, 12 and 13

Specification:

Enclosure Rating : Weatherproof; Hermetically Sealed; Explosion-proof UL & CSA listed for Class I, Groups A, B, C & D; Class II, Groups E, F & G, Divisions 1 & 2.
Intrinsically Safe : Simple Apparatus (w/ barrier).
Initial Contact Resistance : 0.50 ohms (max).
Repeatability : 0.005 in. (.01 cm).
Hysteresis : 0.030 in. (.08 cm).
Electrical Connection : Factory sealed with 18″ minimum, 4 conductor, PVC insulated, 18 AWG – green/red/black/white (ground/NC/NO/Common).
Potting : Epoxy Resin.

Applications:

Position monitoring and indication with devices such as linear valves – actuators & cylinders – rotary valves – dampers

Additional Information:

Item Code: Series-DT

Hand Operated Globe Valve

Rs 1,200 / Piece

Brand	DWYER USA
Temperature	-20 to 356 Degree F (-28.9 to 180 Degree C).
Application	Industrial
Model	Series-HGV
End Connections	Female NPT
Wetted Materials	Body, Bonnet, Packing Nut CF8M (316) SS; Disc, Stem, Retainer Ring, Gland 316 SS; Packing PTFE.
Other Materials	Hand Wheel cast iron; Plate aluminum; Wheel Nut 316 SS.

Hand Operated Globe Valve

The Series HGV Hand Operated Globe Valves are an economical and functional alternative to large actuator/control valve packages. Metal-to-metal seating ensures excellent flow control and shut-off service. The body and bonnet are each constructed of CF8M (316) stainless steel for superb corrosion resistance and chemical compatibility.

Features:

Threaded ends conform to ANSI B 2.1, BS 21, DIN 259/2999, ISO 228.
Stainless steel inside screw, screwed bonnet, swivel disc integral seat, rising stem and hand wheel.

Additional Information:

Item Code: Series-HGV

Hi Flow Control Valve

Rs 10,000 / Piece

Condition	New
Temperature	20 to 400 Degree F (-7 to 204.4 Degree C)
Application	Flow control, mixing, or diverting service.
Brand	DWYER USA
Usage/Application	Perfect for steam, water or compatible glycol solutions.
Place Of Origin	DELHI
Model Number	Series-2000VA-3000WA
Body Style	2 Way or 3 Way globe
Line Size	1/2″ to 2.
End Connections	1/2″ to 2″ female NPT.
Pressure Limit	Iron or Bronze Body – 250 psi (17.2 bar), 316 SS Body – 300 psi (20.7 bar).
Wetted Materials	Body iron, bronze, or 316 SS; Trim 316 SS; Packing PTFE.

Hi Flow Control Valve

W.E. Anderson Hi-Flow™ control valves are single seated, top or cage guided globe valves – probably the simplest, from construction standpoint, yet most versatile control valve in The Hi-Flow™ control valve can fit applications with a smaller size since the valve has a greater flow capacity than most conventional valves of the same size.

Coupled with the high flow capacity, the Hi-Flow™ control valve maintains a wide rangeability of 50:1 to insure precise control. Heavy duty Hi-Flow™ control valves are ruggedly constructed of the highest quality materials, precision machined, and performance tested to assure years of trouble free service. Standard packing consists of PTFE V-rings and wiper to minimize friction without leakage at high operating pressures. Available in brass, iron, 316 SS body, trim is 316 SS with all welded plug construction provide superior durability and corrosion resistance.

Features:

Wide Rangeability of 50:1
Exceptional shut-off and leak rate that meets ANSI/FCI 70-2 Class IV (0.01% of Cv in the closed position)
Selectable fail safe condition with Air-to-Raise or Air-to-Lower actuators and Push-to-Open or Push-to-Close valve bodies
Linear or equal percentage flow characteristics
Low flow options of restricted trim or needle plug
Removeable and replaceable seat ring

Specification Actuator:

Type : Pneumatic spring/diaphragm.
Control Signal : 3 to 15 psi (0.21 to 1.0 bar) standard. Custom ranges available.
Maximum Supply Pressure : 220, 222, and 230: 100 psi (6.89 bar). 221, 223, 231, and 233: 50 psi (3.45 bar).
Air Connection : 1/4″ female NPT.
Temperature Limit : 150°F (66°C).

Applications:

Flow control, mixing, or diverting service.
Perfect for steam, water or compatible glycol solutions.

Request
Callback

Additional Information:

Item Code: Series-2000VA-3000WA

Instrument Air Filter Regulator

Rs 2,100 / Piece

Temperature	-4 to 158 Degree F (-20 to 70 Degree C).
Weight	1.7 lb (0.6 kg), SS models 3.0 lb (1.4 kg).
Process Connection	1/4″ NPT.
Model	Series-AFR2
Brand	DWYER USA
Wetted Materials	Body Aluminum or SS; Filter Polyethylene; Diaphragm and valve seat plug Nitrile elastomer.
Pressure Limit	250 psi (17.2 bar).
Minimum Filtering Size	5 micron.

Instrument Air Filter Regulator

The Series AFR2 Instrument Filter Regulator provides clean air pressure to pneumatic controllers, valve positioners, air cylinders and other equipment. Self-relieving regulator is equipped with a 5 micron filter housed in a dripwell with gage port.

Other Details:

Model	Description
AFR2-1	Air filter regulator, range 0-60 psi (0-4 bar), aluminum body
AFR2-1SS	Air filter regulator, range 0-60 psi (0-4 bar), stainless steel body
AFR2-2	Air filter regulator, range 0-121 psi (0-8 bar), aluminum body
AFR2-2SS	Air filter regulator, range 0-121 psi (0-8 bar), stainless steel body

Request
Callback

Additional Information:

Item Code: Series-AFR2

NPT Brass Ball Valve

Rs 200 / Piece

Automation Grade	Manual
Brand	DWYER USA
Condition	New
Place Of Origin	DELHI
Temperature Range	-40 Degree to 365 Degree F (-40 Degree to 185 Degree C).
Color	Golden
Model Number	Series-DBVL-SWBV
End Connections	DBVL 1/4″ to 3″ female NPT; SWBV 1/4″ to 3″ sweat connections

NPT Brass Ball Valve

The SERIES DBVL & SWBV Brass Ball Valves are economical hand lever ball valves ideal for commercial or industrial use. The valve body, body cap, and stem are made of a quality brass for great durability and compatibility. The seats and stem packing are constructed of PTFE for long lasting service. A blowout-proof stem provides safety in the event of overpressure, and the full port design allows for the maximum flow coefficient while still retaining minimal pressure drop.

Features:

IAPMO Certified to meet NSF/ANSI 372-2010 for lead regulated applications or projects
Blowout-proof stem provides safety in the event of overpressure
Full port NPT design allows for maximum flow coefficient while still retaining minimal pressure drop
Valve body, body cap, and stem are constructed of a quality low lead brass for great durability and compatibility
Seats and stem packing are constructed of PTFE for long lasting service
1/4″ to 3″ sizes are available for a variety of applications

Specification:

Service : Gases and liquids compatible with wetted materials.
Pressure Limits : 1/4″ to 2″: -29″ Hg to 600 psi (-736 mm Hg to 41 bar) WOG; DBVL: 2-1/2″ to 3″: -29″ Hg to 250 psi (-736 mm Hg to 17 bar) WOG; SWBV: 2-1/2″ to 3″, -29″ Hg to 400 psi (-736 mm Hg to 27 psi) WOG.
Wetted Materials : Body, Body Cap, and Stem: Brass; Seat and Packing: PTFE; Ball: DBVL: 1/4″ to 1″: Chrome Plated Brass; 1-1/4″ to 3″: Stainless Steel; SWBV: Stainless Steel.
Other Materials : Other Materials: Body Gland and Stem Nut: Brass; Handle and Handle Nut: Steel; Handle Cover: Rubber.

Other Details:

Model	Description
DBVL-00	Brass ball valve, 600 psi, full port, 1/4″
DBVL-01	Brass ball valve, 600 psi, full port, 3/8″
DBVL-02	Brass ball valve, 600 psi, full port, 1/2″
DBVL-03	Brass ball valve, 600 psi, full port, 3/4″
DBVL-04	Brass ball valve, 600 psi, full port, 1″
DBVL-05	Brass ball valve, 600 psi, full port, 1-1/4″
DBVL-06	Brass ball valve, 600 psi, full port, 1-1/2″
DBVL-07	Brass ball valve, 600 psi, full port, 2″
SWBV-00	Sweat connection brass ball valve, 600 psi, full port, 1/4″
SWBV-01	Sweat connection brass ball valve, 600 psi, full port, 3/8″
SWBV-02	Sweat connection brass ball valve, 600 psi, full port, 1/2″
SWBV-03	Sweat connection brass ball valve, 600 psi, full port, 3/4″
SWBV-04	Sweat connection brass ball valve, 600 psi, full port, 1″
SWBV-05	Sweat connection brass ball valve, 600 psi, full port, 1-1/4″
SWBV-06	Sweat connection brass ball valve, 600 psi, full port, 1-1/2″
SWBV-07	Sweat connection brass ball valve, 600 psi, full port, 2″
SWBV-08	Sweat connection brass ball valve, 400 psi, full port, 2-1/2″
SWBV-09	Sweat connection brass ball valve, 400 psi, full port, 3″

Additional Information:

Item Code: Series-DBVL-SWBV

Needle Valve

Rs 800 / Piece

Model Number	Series-NVII
Condition	New
Place Of Origin	DELHI
Temperature Range	-40 to 350 Degree F (-40 to 176.7 Degree C
Pressure	2000 psi (138 bar) (CWP).
Power	Manual
Weight	0.22 lb
Flow Coefficient	0.31
Brand	DWYER USA
End Connection Size	1/4″ female NPT
Wetted Materials	Valve Body brass (CW617N); Retainer, Handwheel brass (CW614N); O-Ring fluoroelastomer.

Needle Valve

Model NVII Needle Valve provides easy flow regulation in all applications, including shut off and throttling for pressure gages and instruments. With a one piece, hot forged brass body construction, years of maintenance-free service can be expected. The model NVII, with its tamper-proof design and blowout-proof stem, provides excellent performance and reliability.

Additional Information:

Item Code: Series-NVII

Pneumatic and Electric Actuators

Rs 2,100 / Piece

Usage/Application	Designed for quarter turn valve or damper control
Model Number	Series-ACT
Condition	New
Brand	DWYER USA
Normal Supply Pressure	DA 40 to 115 psi (2.7 to 7.9 bar); SR 80 psi (5.5 bar).
Maximum Supply Pressure	120 psi (8.6 bar).
Housing Material	Anodized aluminum body and epoxy coated aluminum end caps.
Air Connections	DA01 1/8″ female NPT; DA02 to DA14 1/4″ female NPT; SR02 to SR14 1/4″ female NPT.
Temperature	-40 to 176 Degree F (-40 to 80 Degree C).

Pneumatic and Electric Actuators

The W.E. Anderson Series ACT Actuators are available in either pneumatic or electric models. The wide range of torques and voltages means there is an actuator for almost any application. The standard ISO 5211 mounting configuration makes installation to any valve or damper quick and simple. W.E. Anderson pneumatic ACT models are a compact rack-and-pinion design with a symmetrical structure that ensures fast and steady action, high precision and high output power. The corrosion resistant anodized aluminum body is designed to withstand the harsh and abusive industrial environments and provide reliable service. We offer double acting and spring return models in a variety of sizes to fit any application.

W.E. Anderson electric ACT models are available in two-position or modulating configurations and NEMA 4X or NEMA 7 rated enclosures. All electric actuators utilize a high grade powder coated aluminum enclosure with visual indicators. The two-position models come standard with two auxiliary switches, and modulating models offer an output for position monitoring. Certain models are equipped with manual overrides allowing the operator to cycle the valve manually for installation or maintenance checks.

Features:

ISO 5211 Mounting configuration for easy installation
Pneumatic actuators offer corrosion resistance anodized finish
NAMUR mounting configuration on pneumatic actuators
Two-position electric actuators include auxiliary limit switches
Modulating electric actuators offer an output for position monitoring

Applications:

Designed for quarter turn valve or damper control

Specification:

Electric “TD” and “MD” Series:

Power Requirements : 110 VAC, 220 VAC, 24 VAC or 24 VDC (MD models not available in 24 VDC).
Cycle Time (per 90°) : TD01: 4 s; MD01: 10 s; TD02 and MD02: 20 s; TD03 and MD03: 30 s; TD04 and MD04: 30 s; TD05 and MD05: 30 s; TD06 and MD06: 45 s; TD07 and MD07: 45 s.
Duty Rating : 85%.
Enclosure Rating : NEMA 4X (IP67).
Housing Material : Powder coated aluminum.
Temperature Limits : -22 to 140°F (-30 to 60°C).
Electrical Connection : 1/2″ female NPT.
Modulating Input : 4 to 20 mA.
Standard Features : Manual override, position indicator, and TD models come with two limit switches.

Electric “TI” and “MI” Series:

Power Requirements : 110 VAC, 220 VAC, 24 VAC or 24 VDC.
Enclosure Rating : NEMA 7.
Housing Material : Powder coated aluminum.
Temperature Limits: -40 to 140°F (-40 to 60°C).
Electrical Connection : 1/2″ female NPT.
Modulating Input : 4 to 20 mA.
Standard Features : Position indicator and two limit switches.

Additional Information:

Item Code: Series-ACT

Valve Position Sensor

Rs 1,000 / Piece

Condition	New
Brand	Dwyer Usa
Power Supply	20-140 VAC (50/60 Hz),10-200 VDC.
Temperature Deg Celsius	-13 to 176 Degree F (-25 to 80 Degree C).
Electrical Connection	4-pin quick disconnect.
Switching Frequency	25 Hz.
Voltage Drop	5.0 V.
Electrical Rating	200 mA.
Enclosure Material	Polybutylene Terephthalate.
Hysteresis	3-15% of sensing range.
Leakage Current	0.8 mA.
Minimum Load Current	5 mA
Mounting Holes	NAMUR Mounting – 3.15″ x 1.18″ (80 x 30 mm) or 5.118″ x 1.118″ (130 x 30 mm).
Repeatability	0.01 mm.
Switch Type	Dual normally open.

Valve Position Sensor

The dual inductive, 2-wire AC/DC Series VPS Valve Position Sensor maintains VDI/VDE 3845 dimensions so positioners can be easily mounted on top of the sensor and target. The Model VPS2411 Sensor and Model P1 Target mount easily and directly to actuators with ISO NAMUR topworks. Fully adjustable target in 2° increments, the sensor has two independent LED’s and bright Flow Line indicator that provide local visual indication. All electrical connections are made with the Model VIP82 4-pin quick disconnect cable (6 ft in length), for ease in installation. Solid state components are fully embedded in an epoxy resin to prevent condensation build-up and to protect against vibration and shock. The rugged PBTP housing provides excellent corrosion resistance and moisture protection.

Features:

Fully adjustable target in 2° increments
LED indication for visual indication
4-pin quick disconnect electrical connection

Additional Information:

Item Code: Series-VPS

Category: Pipe Fittings Valves

Elementor #2041

Automated Ball Valve

Rs 200 / Piece

Current to Pressure Transducer

Rs 14,000 / Piece

Electro Pneumatic Transducer

Rs 9,000 / Piece

Linear Smart Positioner

Rs 70,000 / Piece

Needle Valve 1 Valve Block Manifold

Rs 2,000 / Piece

Position Indicator Transmitter

Rs 1,300 / Piece

Self Acting Temperature Control Valve

Rs 6,500 / Piece

3 Piece NPT Stainless Steel Ball Valve

Rs 1,200 / Piece

3 Valve Block Manifold

Rs 1,500 / Piece

3 Way NPT Stainless Steel Ball Valve

Rs 1,500 / Piece

Butterfly Valve

Rs 2,800 / Piece

Detector Position Sensor

Rs 1,000 / Piece

Hand Operated Globe Valve

Rs 1,200 / Piece

Hi Flow Control Valve

Rs 10,000 / Piece

Instrument Air Filter Regulator

Rs 2,100 / Piece

NPT Brass Ball Valve

Rs 200 / Piece

Needle Valve

Rs 800 / Piece

Pneumatic and Electric Actuators

Rs 2,100 / Piece

Valve Position Sensor

Rs 1,000 / Piece