+(91)-9871034100
PHONE NO
07AOSPS8386M1ZM
GST NO

Category: Uncategorized

Series 2-5000 Minihelic II Differential Pressure Gage Wholesaler

Series 2-5000 Minihelic II Differential Pressure Gauge

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring RangeSeries 2-5000
Model Name/NumberSeries 2-5000
Usage/ApplicationDuct
ConnectionNew
HousingGlass Filled Nylon Polycarbonate Lens
ServiceAir and Compatible Gases
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection
Mounting OrientationDiaphragm in Vertical Position
Weight6 oz (170.1 g)
Agency ApprovalsMeets the technical requirements of EU Directive 2011/65/EU (RoHS II)

Series 2-5000 Minihelic II Differential Pressure
Gage

 
Combining High Accuracy, Compactness, Dependability, and Low CostCombining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Series 2-5000 Minihelic® II Differential Pressure Gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig

Product Applications:
  • Room Positive Pressure Sensing
  • Local Indication on Filter Status
  • Face Velocity on Fume Hood
  • Duct Pressures
  • Cabinet Air-Purging
  • Medical Respiratory Equipment
  • Air Samplers
  • Electronic Air Cooling Systems
  • Laminar Flow Hoods
 

Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0 – 25 MM WC

 
 
Minimum Order Quantity12 Number
BrandDwyer USA
Measuring Range0 – 25 MM WC
Model Name/Number2-5000-25MM
Usage/ApplicationDuct
MaterialGlass Filled Nylon Polycarbonate Lens
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight6 oz (170.1 g)
Dial Size67 MM

Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0-25 MM W.C Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-25mm Minihelic Ii, Differential Pressure Gauge, 0/25mm
  • Housing is molded from Strong Mineral and Glass Filled Nylon.
  • Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
  • Full view lens is Removable and Molded of Tough Acrylic.
  • Aluminum scale litho-printed black on white, enhances Readability.
  • Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
 

Dwyer 2-5000-50MM Minihelic II Differential Pressure Gauge 0-50 MM WC

 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-50 MM WC
Model Name/NumberDwyer 2-5000-50MM
Usage/ApplicationDuct
MaterialGlass Filled Nylon Polycarbonate Lens
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight6 oz (170.1 g)
Size67 MM

Dwyer 2-5000-50MM Minihelic II Differnntial Pressure Gauge 0-50 MM w.c Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-50mm Minihelic Ii, Differential Pressure Gauge, 0/50mm
  • Housing is molded from Strong Mineral and Glass Filled Nylon.
  • Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
  • Full view lens is Removable and Molded of Tough Acrylic.
  • Aluminum scale litho-printed black on white, enhances Readability.
  • Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
 

Dwyer 2-5000-100MM Minihelic II Differential Pressure Gauge 0-100 MM WC

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-100 MM WC
Model Name/NumberDwyer 2-5000-100MM
Usage/ApplicationDuct
MaterialGlass Filled Nylon Polycarbonate Lens
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Dial Size67 MM
Pressure Limits30 psig (2.067 bar) Continuous to Either Pressure Connection
Temperature Limits20 to 120 deg F (-6.67 to 48.9 deg C)

Dwyer 2-5000-100MM Minihelic II Differnntial Pressure Gauge 0-100 MM w.c Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-100mm Minihelic Ii, Differential Pressure Gauge, 0/100mm
  • Housing is molded from Strong Mineral and Glass Filled Nylon.
  • Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
  • Full view lens is Removable and Molded of Tough Acrylic.
  • Aluminum scale litho-printed black on white, enhances Readability.
  • Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
 

Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-125 Pa
Model Name/NumberDwyer 2-5000-125PA
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 deg F (21.1 deg C)
Weight6 oz (170.1 g)
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa
Housing is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops Of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-125pa Minihelic Ii, Differential Pressure Gauge, 0/125 Pa
  • Housing is molded from strong mineral and glass filled nylon.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • Full view lens is removable and molded of tough acrylic.
  • Aluminum scale litho-printed black on white, enhances readability.
  • Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
 

Dwyer 2-5000-250PA Minihelic II Differential Pressure Gauge 0-250 Pa

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-250 Pa
Model Name/NumberDwyer 2-5000-250PA
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight6 oz (170.1 g)
Dial Size63 mm
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection


Dwyer 2-5000-250PA Minihelic II Differential Pressure Gauge 0-250 Pa
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-250pa Minihelic Ii, Differential Pressure Gauge, 0/250 Pa

  • Housing is molded from strong mineral and glass filled nylon.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • Full view lens is removable and molded of tough acrylic.
  • Aluminum scale litho-printed black on white, enhances readability.
  • Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-500PA Minihelic II Differential Pressure Gauge 0-500 Pa

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-500 Pa
Model Name/NumberDwyer 2-5000-500PA
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Temperature20 to 120 Degree F (-6.67 to 48.9 Deg C)
Weight6 oz (170.1 g)
Size63 MM
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-500PA Minihelic II Differential Pressure Gauge 0-500 Pa
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-500pa Minihelic Ii, Differential Pressure Gauge, 0/500pa
  • Housing is molded from strong mineral and glass filled nylon.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • Full view lens is removable and molded of tough acrylic.
  • Aluminum scale litho-printed black on white, enhances readability.
  • Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.
 

Dwyer 2-5000-1KPA Minihelic II Differential Pressure Gauge 0-1 KPA

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-1 KPA
Model Name/NumberDwyer 2-5000-1KPA
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight6 oz (170.1 g)
Dial Size63 MM
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection
Temperature Limits20 to 120 deg F (-6.67 to 48.9 deg C)
Mounting OrientationDiaphragm in Vertical Position


Dwyer 2-5000-1KPA Minihelic II Differential Pressure Gauge 0-1 KPA 
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-1kpa Minihelic Ii, Differential Pressure Gauge, 0/1 Kpa

  • Housing is molded from strong mineral and glass filled nylon.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • Full view lens is removable and molded of tough acrylic.
  • Aluminum scale litho-printed black on white, enhances readability.
  • Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-3KPA Minihelic II Differential Pressure Gauge 0-3 KPA

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-3 KPA
Model Name/NumberDwyer 2-5000-3KPA
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Temperature20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Dial Size63 MM
MountingDiaphragm In Vertical Position
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-3KPA Minihelic II Differential Pressure Gauge 0-3 KPA
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-3kpa Minihelic Ii, Differential Pressure Gauge, 0/3 Kpa
  • Housing is molded from strong mineral and glass filled nylon.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • Full view lens is removable and molded of tough acrylic.
  • Aluminum scale litho-printed black on white, enhances readability.
  • Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm
 

Dwyer 2-5205-5PSI Minihelic II Differential Pressure Gauge 0-5 PSI

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-5 PSI
Model Name/NumberDwyer 2-5205-5PSI
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 DegreeF (21.1 DegreeC)
Temperature20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Weight6 oz (170.1 g)
Dial Size63 MM
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection
Temperature Limits20 to 120 deg F (-6.67 to 48.9 deg C)
Mounting OrientationDiaphragm in Vertical Position

Dwyer 2-5205-5PSI Minihelic II Differential Pressure Gauge 0-5 PSI
Designed For Panel Mounting in a 2-5/8″ Diameter Hole. Pressure Connections Are Barbed. Dwyer 2-5205 Minihelic II Differential Pressure Gauge
The Dwyer 2-5205 Differential Pressure Gauge has barbed connections and a range of 0-5 psi. Combining clean design , small size and low cost with enough accuracy for all but the most demanding applications our Minihelic® II gauge offers the latest in design Features for a dial type differential pressure gauge. It is our most compact gauge but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic® II gauge is designed for panel mounting in a single 2-5/8″ diameter hole. Standard pressure connections are barbed fittings for 3/16″ ID tubing; optional 1/8″ male NPT connections are also available. Over-Pressure protection is built into the Minihelic® II gauge by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gauge. With removable lens and rear housing, the gauge may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gauge will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic® II gauge make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gauge, the Minihelic® II gauge finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic® II gauge is suitable for many of the same applications as the Magnehelic® gauge where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic® gauge are not required.
 

Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH

 
 
Minimum Order Quantity10 Number
BrandDwyer USA
Measuring Range0-0.5 inch
Model Name/NumberDwyer 2-5000-0
Usage/ApplicationIndustrial
Accuracy+-5% of FS at 70 deg F (21.1 deg C)
Temperature20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Weight6 oz (170.1 g)
Dial Size63 MM
Pressure Limits30 psig (2.067 bar) continuous to either pressure connection


Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-0 Minihelic Ii, Differential Pressure Gauge, 0/0.5

  • Housing is molded from strong mineral and glass filled nylon.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • Full view lens is removable and molded of tough acrylic.
  • Aluminum scale litho-printed black on white, enhances readability.
  • Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
  • Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
  • Jewel bearings provide virtually friction-free helix motion.
  • Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
  • Zero adjustment screw, located behind the removable lens, eliminates tampering.
  • Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
  • Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
  • Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
  • Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
  • Low pressure tap connects to rear chamber.
  • Coil spring link provides a resilient connection between the diaphragm and the range spring.
  • Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
  • High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Series 251 Wet Differential Pressure Transmitter

Sensocon Series 251-04 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Accuracy+/- 0.25% F.S.
Operating Temperature-40o to 185o F (-40o to 85o C)
Over PressurePositive – 2x F.S.; negative – 1x F.S.
Working Pressure1000 PSI (7MPa)
Stability0.5% F.S/yr
Response Time100 ms

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm
sensor technology that outperforms standard double sensor products in accuracy,
reliability and static operating pressure. This differential pressure sensing technology
offers 0.25% accuracy with static operating pressures up to 1000 PSI (7 MPa). The
Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP
65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn
down and comes standard with a certificate of calibration.
 

Sensocon Series 251-05 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Measuring RangeSeries 251-05
Model Name/NumberSeries 251-05
Usage/ApplicationIndustrial
ConnectionNew
Model No.Series 251
Accuracy+/- 0.25% F.S.
Over PressurePositive – 2x F.S.; negative – 1x F.S.
Working Pressure1000 PSI (7MPa)
Power Supply12-36 VDC
Response Time100 ms

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-05

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive – 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4″ NPT female, optional 1/4″ G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-05 0 – 50 PSI ( 344.7 kPa )
 

Sensocon Series 251-01 Wet Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
BrandSensocon
Accuracy+/- 0.25% F.S.
Response Time100 ms
Media CompatibilityGas and Liquids compatible with 316SS
Over PressurePositive – 2x F.S.; negative – 1x F.S.
Working Pressure1000 PSI (7MPa)
Thermal Effect0.028%/o F (0.050%/o C)
Power Supply12-36 VDC

Sensocon USA Series 251-01 Wet Differential Pressure Transmitter

The Series 251 Wet/Wet Differential Pressure Transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration


Media compatibility:Gas and Liquids compatible with 316SSAccuracy:+/- 0.25% F.S.Over Pressure:positive – 2x f.S.; negative-1x F.S.Working Pressure:1000 PSI (7MPa)Temperature Limits:Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)Thermal Effect:+/- 0.028% FS/°F (0.050%FS/°C)Stability:+/- 0.5% FS/yearPower Supply:12-30 VDCOutput Signal:4-20 mA, 2-wireElectrical Connetction:mini DIN 43650Response Time:100 msTurn Down:5:1Enclosure Rating:NEMA 4X (IP 65)Process Connection:1/4″ NPT female, optional 1/4″ GMounting Position Effect:

0.1% F.S., can be corrected by zero adjust

Model NumberRange
251-010 – 5 PSI ( 34.5 kPa )
 

Sensocon Series 251-02 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Accuracy+/- 0.25% F.S.
Media CompatibilityGas and Liquids compatible with 316SS
Working Pressure1000 PSI (7MPa)
Thermal Effect0.028%/o F (0.050%/o C)
Power Supply12-36 VDC
Output Signal4-20 mA, 2 wire


The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm
sensor technology that outperforms standard double sensor products in accuracy,
reliability and static operating pressure. This differential pressure sensing technology
offers 0.25% accuracy with static operating pressures up to 1000 PSI (7 MPa). The
Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP
65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn
down and comes standard with a certificate of calibration

Sensocon Series 251-08 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Model No.SERIES 251-08
Accuracy+/- 0.25% F.S.
Media CompatibilityGas and Liquids compatible with 316SS
Over PressurePositive – 2x F.S.; negative – 1x F.S.
Working Pressure1000 PSI (7MPa)
Thermal Effect0.028%/o F (0.050%/o C)
Power Supply12-36 VDC
Response Time100 ms

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm
sensor technology that outperforms standard double sensor products in accuracy,
reliability and static operating pressure. This differential pressure sensing technology
offers 0.25% accuracy with static operating pressures up to 1000 PSI (7 MPa). The
Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP
65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn
down and comes standard with a certificate of calibration.
 

Sensocon Series 251-07 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Accuracy+/- 0.25% F.S.
Media CompatibilityGas and Liquids compatible with 316SS
Working Pressure1000 PSI (7MPa)
Thermal Effect0.028%/o F (0.050%/o C)
Stability0.5% F.S/yr
Power Supply12-36 VDC


The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm
sensor technology that outperforms standard double sensor products in accuracy,
reliability and static operating pressure. This differential pressure sensing technology
offers 0.25% accuracy with static operating pressures up to 1000 PSI (7 MPa). The
Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP
65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn
down and comes standard with a certificate of calibration.

Sensocon Series 251-06 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Accuracy+/- 0.25% F.S.
Media CompatibilityGas and Liquids compatible with 316SS
Working Pressure1000 PSI (7MPa)
Power Supply12-36 VDC
Response Time100 ms

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm
sensor technology that outperforms standard double sensor products in accuracy,
reliability and static operating pressure. This differential pressure sensing technology
offers 0.25% accuracy with static operating pressures up to 1000 PSI (7 MPa). The
Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP
65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn
down and comes standard with a certificate of calibration.
 

Sensocon Series 251-03 Wet Differential Pressure Transmitter

 
 
BrandSensocon
Accuracy+/- 0.25% F.S.
Over PressurePositive – 2x F.S.; negative – 1x F.S.
Working Pressure1000 PSI (7MPa)
Thermal Effect0.028%/o F (0.050%/o C)
Stability0.5% F.S/yr
Output Signal4-20 mA, 2 wire

The Series 251 Wet/Wet Differential Pressure Transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration
 

Series 251 Wet Differential Pressure Transmitter

 
 
Accuracy+/- 0.25%
Response Time10 ms
Working Pressure1000 PSI (7MPa)
Power Supply12-36 VDC
Housing Material316 SS
ProtectionIP 65
Output Signal4-20 mA, 2-wire


The Series 251 Wet/Wet Differential Pressure Transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Model NumberRange
251-010 – 5 PSI ( 34.5 kPa )
251-020 – 10 PSI ( 68.9 kPa )
251-030 – 15 PSI ( 103 kPa )
251-040 – 30 PSI ( 206.8 kPa )
251-050 – 50 PSI ( 344.7 kPa )
251-060 – 100 PSI ( 689.5 kPa )
251-070 – 150 PSI ( 1034 kPa )
251-080 – 300 PSI ( 2068 kPa )

Aerosense Differential Pressure Switch Wholesaler

Aerosense Differential Pressure Switch

 
 
Minimum Order Quantity12 Number
Electrical Connection3 Screw terminal
Weight150 gms
BrandAerosense
MaterialABS
Cable EntryM6
Maximum Pressure50 kPA
IP ProtectionIP54

The series of pressure switches Aerosense Differential Pressure Switch is the most updated one.Generally, they are applied in the fan, blower and filter monitoring as well as to measure the pressure and flow of gases & liquids in different industries. Enabled with the effective mechanism these switches have high-tech features & specifications such as selectable switching point adjustment and measurement unit facility in PA.Several additional accessories are also provided for the ease of users that primarily include metallic duct connectors,plastic dust connectors, and fixing screws.

Features:

  • Pressure and flow monitoring
  • Two fixing screws
  • Metallic duct connectors
 

Aerosense Differential Pressure Switch Model PS 300

 
 
Minimum Order Quantity12 Number
BrandAerosense
Weight150 gms
Electrical Connection2A/250VAC
Usage/ApplicationFan,Blower and filter monitoring
IP ProtectionIP 54
Maximum Pressure50 kPa
Storage Temperature-40 to 85 Degree C
Operation Temperature-20 to 60 Degree C

The Series PS Differential Pressure Switch is designed for pressure, vacuum and differential pressure. The dual scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:

  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring

Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS300

30. .300 pa

20 pa

30 Pa±5 Pa

300 Pa±30Pa

03A/250VAC

2A/250VAC

Aerosense Differential Pressure Switch Model PS 500

 
 
 
Minimum Order Quantity12 Number
Media TypeGas
BrandAerosense
Weight150 gms
Electrical Connection2A/250VAC
Electrical Rating3 Screw terminal
Usage/ApplicationFan,Blower and filter monitoring
IP ProtectionIP54
Maximum Pressure50 kPa
Storage Temperature-40 to 85 Degree C


The Series PS Differential Pressure Switch is Designed For Pressure, Vacuum and Differential Pressure. The Dual Scaled Adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:

  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring


Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS500

30. .500 pa

20 pa

30 Pa±5 Pa

500 Pa±30Pa

03A/250VAC

2A/

Aerosense Differential Pressure Switch Model PS 600

 
 
Minimum Order Quantity12 Number
BrandAerosense
Weight150 gms
Electrical Connection2A/250VAC
Usage/ApplicationFan,Blower and filter monitoring
IP ProtectionIP54
Maximum Pressure50 kPa
Storage Temperature-40 to 85 Degree C
Operation Temperature-20 to 60 Degree C
Cable EntryM16


The Series PS Differential Pressure Switch is Designed For Pressure, Vacuum and Differential Pressure. The Dual Scaled Adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:

  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring


Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS600

40. .600 pa

30 pa

40 Pa±5 Pa

600 Pa±30Pa

03A/250VAC

2A/250VAC

Aerosense Differential Pressure Switch Model PS 1500

 
 
Minimum Order Quantity12 Number
BrandAerosense
WeightWeight 150 gms
Electrical Connection2A/250VAC
Usage/ApplicationFan,Blower and filter monitoring
IP ProtectionIP 54
Maximum Pressure50 kPa
Storage Temperature-40 to 85 Degree C
Cable EntryM16
MaterialABS

The Series PS Differential Pressure Switch is Designed For Pressure, Vacuum and Differential Pressure. The Dual Scaled Adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:
  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring

Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS1500

100…1500 pa

80 pa

100 Pa±1OPa

1500 Pa±150Pa

03A/250VAC

2A1250VAC
 

Aerosense Differential Pressure Switch Model PS 4500

 
 
Minimum Order Quantity12 Number
Power/Voltage2A/250VAC
BrandAerosense Singapore
Weight150 gms
Usage/ApplicationFan,Blower and filter monitoring
IP ProtectionIP54
Maximum Pressure50 kPa
Operation Temperature-20 to 60 Degree C


The Series PS Differential Pressure Switch is Designed For Pressure, Vacuum and Differential Pressure. The Dual Scaled Adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:

  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring


Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS4500

500…4500 pa

180 pa

500 Pa±50 Pa

4500 Pa±200Pa

5A/250VAC

2A/250VAC

Aerosense Differential Pressure Switch Model PS 200

 
 
Minimum Order Quantity12 Number
Pressure Range20-200 Pa
Model No.PS200
Media TypeGas
BrandAerosense
Weight150 gms
Bulb MaterialABS
Usage/ApplicationFan,Blower and filter monitoring


The Series PS Differential Pressure Switch is designed for pressure, vacuum and differential pressure. The dual scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:

  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring


Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS200

20. .200 pa

10 pa

20 Pa±5 Pa

200 Pa±20Pa

01A/250VAC

 

Aerosense Series PS Differential Pressure Switch

 
 
Electrical Connection3 Screw terminal
BrandAerosense
IP ProtectionIP54
Maximum Pressure50 kPA
Storage Temperature-40 to 85 Degree C
Cable EntryM16
MaterialABS

Series PS Differential Pressure Switch With dual scale field adjustable Set Point Knob. The Series PS Differential Pressure Switch is designed for pressure, vacuum and differential pressure. The dual scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:
  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring

Model Number:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS200

20. .200 pa

10 pa

20 Pa±5 Pa

200 Pa±20Pa

01A/250VAC

 

PS300

30.. 300 pa

20 pa

30 Pa±5 Pa

300 Pa±30Pa

3A/250VAC

2A/250VAC

PS500

30. .500 pa

20 pa

30 Pa±5 Pa

500 Pa±30Pa

3A/250VAC

2A/250VAC

PS600

40 .600 pa

30 pa

40 Pa±5 Pa

600 Pa±30Pa

3A/250VAC

2A/250VAC

PS1500

100…1500 pa

80 pa

100 Pa±1OPa

1500 Pa±150Pa

3A/250VAC

2A1250VAC

PS4500

500…4500 pa

180 pa

500 Pa±50 Pa

4500 Pa±200Pa

5A/250VAC

2A/250VAC

 

Aerosense Differential Pressure Switch Model PS 200

 
 
Minimum Order Quantity12 Number
Electrical Connection3 Screw terminal
Pressure Range20-200 Pa
MaterialABS
Cable EntryM16
Pressure ConnectionMale 0 5 MM
Maximum Pressure50 kPA
Storage Temperature-40 to 85 Degree C
Operation Temperature-20 to 60 Degree C

We are one of the leading manufacturer and supplier of Aerosense Differential Pressure Switch. We obligated to meet the quality standards as per the customer demand.
 

Aerosense Differential Pressure Switch Model PS 500

 
 
Range Setting30-500 pa
Model No.PS 500
Media TypeGas
BrandAerosense
Weight150 gms

The Series PS Differential Pressure Switch is Designed For Pressure, Vacuum and Differential Pressure. The Dual Scaled Adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:
  • Fan, Blower and filter monitoring
  • Pressure and Flow monitoring
  • Valve and damper monitoring

Specifications:
  • Service: Air & non aggressive gases
  • Material: ABS
  • Electrical Connection: 3 Screw terminal
  • Cable Entry: M16
  • Pressure Connection: Male 0 5 MM
  • Weight: 150 gms
  • Operation Temperature: -20 to 60° C
  • Storage Temperature: -40 to 85° C
  • Maximum Pressure: 50 kPA
  • IP Protection: IP54

Model Numbers:

Model Code

Pressure

range

Switching

difference

Accuracy of

Switching

point

Low limit typ.

Electrical

rating

resistive load

Accuracy of

Switching

Point

High limit typ.

Electrical

ratind

inductive load

PS500

30. .500 pa

20 pa

30 Pa±5 Pa

500 Pa±30Pa

03A/250VAC

2A/250VAC

 

Dwyer USA Mark II Plastic Manometer Wholesaler

Mark II Model 40-1-AV Dwyer Manometer Range 0-1.1 Inches w.c

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Model Name/NumberMARK II MODEL 40-1-AV MANOMETER
BrandDwyer USA
Scale LengthApprox. 8-1/4″ (21 cm)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Weight1.04 lb (472 g)/1.23 lb (558 g)


Mark II Model 40-1-AV Dwyer Manometer Range 0-1.1 Inches w.c
Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. Also, it is ideally suited for air velocity and air filter gage applications. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction:

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. The portable stand is a standard feature on Model 40. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories:
Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 40 contains two 4-1/2 foot lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.

Below are other pressure ranges available for Series Mark II Manometer:

ModelRangeFluid Used
Mark II 40-1.1-0-1.0 in w.c.Red oil, .826 s.g.
Mark II 40-25mm0-26 mm w.cRed oil, .826 s.g.
Mark II 40-250PA10-0-250 PaRed oil, .826 s.g.
Mark II 41-2.2-0-2.4 in w.c.Blue oil, 1.91 s.g.
Mark II 41-60mm0-60 mm w.c.Blue oil, 1.91 s.g.
Mark II 41-600PA20-0-600 PaBlue oil, 1.91 s.g.
Mark II 40-1-AV*0-1.1 in w.c.
& 0-4200 fpm
Red oil, .826 s.g.
Mark II 40-250PA-AV*0-260 Pa
& 0-21 mps
Red oil, .826 s.g.
Mark II 41-2-AV*0-2.5 in wc.
& 0-6300 fpm
Blue oil, 1.91 s.g.

Mark II Model 40-1 Dwyer Manometer Range .1-0-1.0 Inches W.C

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationAir Filter Gage
BrandDwyer
Model Name/NumberMARK II MODEL 40-1
Scale LengthApprox. 8-1/4″ (21 cm)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Weight1.04 lb (472 g)/1.23 lb (558 g)


Mark II Model 40-1 Dwyer Manometer Range .1-0-1.0 Inches w.c Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. Also, it is ideally suited for Air Velocity and Air Filter Gage Applications. Capable of pressure measurements above and below atmospheric as well as Differential Pressure Measurements.

Construction:

  • Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. The portable stand is a standard feature on Model 40. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.


Installation:

  • Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.


Accessories:

  • Included with each
  • Mark II Manometer
  • are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 40 contains two 4-1/2 foot lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.


Below are other pressure ranges available for Series Mark II Manometer:

ModelRangeFluid Used
Mark II 40-1.1-0-1.0 in w.c.Red oil, .826 s.g.
Mark II 40-25mm0-26 mm w.cRed oil, .826 s.g.
Mark II 40-250PA10-0-250 PaRed oil, .826 s.g.
Mark II 41-2.2-0-2.4 in w.c.Blue oil, 1.91 s.g.
Mark II 41-60mm0-60 mm w.c.Blue oil, 1.91 s.g.
Mark II 41-600PA20-0-600 PaBlue oil, 1.91 s.g.
Mark II 40-1-AV*0-1.1 in w.c.
& 0-4200 fpm
Red oil, .826 s.g.
Mark II 40-250PA-AV*0-260 Pa
& 0-21 mps
Red oil, .826 s.g.
Mark II 41-2-AV*0-2.5 in wc. 
& 0-6300 fpm
Blue oil, 1.91 s.g.

Mark II Model 28 Dwyer Manometer Range 0-10,500 FPM

 
 
Minimum Order Quantity1 Number
Model Name/NumberMARK II MODEL 28
Usage/ApplicationLaboratory
Accuracy+-3% FS
Weight1.04 lb (472 g)/1.23 lb (558 g)
MaterialMolded Plastic
BrandDwyer
Scale LengthApprox. 8-1/4″ (21 cm
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)


Mark II Model 28 Dwyer Manometer Range 0-10,500 fpm Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction:

  • Mark II Manometers are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.


Installation:

  • Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.


Accessories:

  • Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.


Below are other pressure ranges available for Series Mark II Manometer:

ModelRangeFluid Used
Mark II 250-3 in w.c.Red oil, .826 s.g.
Mark II 260-7 in w.c.Blue oil, 1.91 s.g.
Mark II 27*0-7000 fpmRed oil, .826 s.g.
Mark II 28*0-10,500 fpmBlue oil, 1.91 s.g.
Mark II MM-800-80 mm w.c.Red oil, .826 s.g.
Mark II MM-1800-180 mm w.c.Blue oil, 1.91 s.g.
Mark II M-700PA10-0-700 PaRed oil, .826 s.g.

Mark II Model 27 Dwyer Manometer Range 0-7000 FPM

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationAir Filter Gage
BrandDwyer
Model Name/NumberMARK II MODEL 27
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm).


Mark II Model 27 Dwyer Manometer Range 0-7000 fpm Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction:

  • Mark II Manometers are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.


Installation

  • Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.


Accessories

  • Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.


Below are other pressure ranges available for Series Mark II Manometer:

ModelRangeFluid Used
Mark II 250-3 in w.c.Red oil, .826 s.g.
Mark II 260-7 in w.c.Blue oil, 1.91 s.g.
Mark II 27*0-7000 fpmRed oil, .826 s.g.
Mark II 28*0-10,500 fpmBlue oil, 1.91 s.g.
Mark II MM-800-80 mm w.c.Red oil, .826 s.g.
Mark II MM-1800-180 mm w.c.Blue oil, 1.91 s.g.
Mark II M-700PA10-0-700 PaRed oil, .826 s.g.

Mark II Model 26 Dwyer Manometer Range 0-7 Inches WC

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationAir Velocity Measurement
BrandDwyer
Model Name/NumberMARK II MODEL 26
Weight1.04 lb (472 g)/1.23 lb (558 g)
Scale LengthApprox. 8-1/4″ (21 cm)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)


Mark II Model 26 Dwyer Manometer Range 0-7 Inches WC Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction

  • Mark II manometers
  • are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.


Installation:

  • Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.


Accessories:

  • Included with each Mark II manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.


Below Are Other Pressure Ranges Available For Series Mark II Manometer:

ModelRangeFluid Used
Mark II 250-3 in w.c.Red oil, .826 s.g.
Mark II 260-7 in w.c.Blue oil, 1.91 s.g.
Mark II 27*0-7000 fpmRed oil, .826 s.g.
Mark II 28*0-10,500 fpmBlue oil, 1.91 s.g.
Mark II MM-800-80 mm w.c.Red oil, .826 s.g.
Mark II MM-1800-180 mm w.c.Blue oil, 1.91 s.g.
Mark II M-700PA10-0-700 PaRed oil, .826 s.g.

Mark II Model 25 Dwyer Manometer Range 0-3 Inches WC

 
 
MaterialMolded Plastic
Usage/ApplicationAir Velocity Measurement
Accuracy+-3% FS
Model Name/NumberMARK II 25 SERIES MARK II
BrandDwyer USA
Weight1.04 lb (472 g)/1.23 lb (558 g)
SizeApprox 8-1/4 INCH 21 cm
I Deal InNew Only
Scale LengthApprox. 8-1/4″ (21 cm)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)


Mark II Model 25 Dwyer Manometer Range 0-3 Inches WC Dwyer Mark II Series Molded Manometers are of the inclined and inclined-Vertical Types. The Curved Inclined-Vertical Tube of the Model 25 Gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as Differential Pressure Measurements.

Construction:

  • Mark II Manometers are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.


Installation:

  • Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.


Accessories:

  • Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.


Below Are Other Pressure Ranges Available For Series Mark II Manometer:

ModelRangeFluid Used
Mark II 250-3 in w.c.Red oil, .826 s.g.
Mark II 260-7 in w.c.Blue oil, 1.91 s.g.
Mark II 27*0-7000 fpmRed oil, .826 s.g.
Mark II 28*0-10,500 fpmBlue oil, 1.91 s.g.
Mark II MM-800-80 mm w.c.Red oil, .826 s.g.
Mark II MM-1800-180 mm w.c.Blue oil, 1.91 s.g.
Mark II M-700PA10-0-700 PaRed oil, .826 s.g.

Mark II Dwyer Molded Plastic Manometer

 
 
Minimum Order Quantity1 Number
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationPaint Booths
BrandDwyer
Weight1.04 lb (472 g)/1.23 lb (558 g)
SizeApprox 8-1/4 INCH 21 cm
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm)


Mark II Dwyer Molded Plastic Manometer Series Mark Iimolded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and Air Filter Gage applications. Both Gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements. Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 1 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8′ of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage fluid in transit. The Model 40 contains two 4-1/2′ lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps. Click here, if you require a Safety Data Sheet for the Blue Gage Fluid or the Red Gage Fluid.

Product Applications:

  • Paint Booths
  • Air Velocity Measurement
  • Air Filter Gage


Models & Ordering:

ModelDescription
MARK II 25Molded Plastic Manometer, Range 0-3″ w.c., Red Oil, .826 sp. gr.
MARK II 26Molded Plastic Manometer,Rrange 0-7″ w.c., Blue Oil, 1.91 sp. gr.
MARK II 27Molded Plastic Manometer, Range 0-7000 fpm, Red Oil, .826 sp. gr., Requires Pitot Tube *Sold Separately.
MARK II 28Molded Plastic Manometer, Range 0-10,500 fpm, Blue Oil, 1.91 sp. gr., Requires Pitot Tube *Sold Separately.
MARK II 40-1Molded Plastic Manometer, Range .1-0-1.0″ w.c., Red Oil, .826 sp. gr.
MARK II 40-1-AVMolded Plastic Manometer, Range 0-1.1″ w.c. & 0-4200 FPM, Red Oil, .826 sp. gr., Requires Pitot Tube Sold Separately.
MARK II 40-250PAMolded Plastic Manometer, Range 10-0-250 Pa, Red Oil, .826 sp. gr.
MARK II 40-250PA-AVMolded Plastic Manometer, Range 0-260 Pa & 0-21 MPS, Red Oil, .826 sp. gr., Requires Pitot Tube Sold Separately.
MARK II 40-25MMMolded Plastic Manometer, Range 0-26 mm w.c., Red Oil, .826 sp. gr.
MARK II 41-2Molded Plastic Manometer, Range .2-0-2.4″ w.c., Blue Oil, 1.91 sp. gr.
MARK II 41-2-AVMolded Plastic Manometer, Range 0-2.5″ w.c. & 0-6300 FPM, Blue Oil, 1.91 sp. gr., Requires Pitot Tube Sold Separately.
MARK II 41-600PAMolded Plastic Manometer, Range 20-0-600 Pa, Blue Oil, 1.91 sp. gr.
MARK II 41-60MMMolded Plastic Manometer, Range 0-60 MM W.C., Blue Oil, 1.91 sp. gr.
MARK II M-700PAMolded Plastic Manometer, Range 10-0-700 Pa, Red Oil, .826 sp. gr.
MARK II MM-180Molded Plastic Manometer, Range 0-180 MM W.C., Blue Oil, 1.91 sp. gr.
MARK II MM-80Molded Plastic Manometer, Range 0-80 MM W.C., Red Oil, .826 sp. gr.

Mark II Model 40-250PA Dwyer Manometer Range 10-0-250 Pa

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationPaint Booths
BrandDwyer
Model Name/NumberMARK II MODEL 40-250PA
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm)


Mark II Model 40-250PA Dwyer Manometer Range 10-0-250 Pa Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. Also, it is ideally suited for air velocity and air filter gage applications. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction

  • Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. The portable stand is a standard feature on Model 40. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.


Installation:

  • Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.


Accessories

  • Included with each
  • Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 40 contains two 4-1/2 foot lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.


Below are other pressure ranges available for Series Mark II Manometer:

ModelRangeFluid Used
Mark II 40-1.1-0-1.0 in w.c.Red oil, .826 s.g.
Mark II 40-25mm0-26 mm w.cRed oil, .826 s.g.
Mark II 40-250PA10-0-250 PaRed oil, .826 s.g.
Mark II 41-2.2-0-2.4 in w.c.Blue oil, 1.91 s.g.
Mark II 41-60mm0-60 mm w.c.Blue oil, 1.91 s.g.
Mark II 41-600PA20-0-600 PaBlue oil, 1.91 s.g.
Mark II 40-1-AV*0-1.1 in w.c.
& 0-4200 fpm
Red oil, .826 s.g.
Mark II 40-250PA-AV*0-260 Pa
& 0-21 mps
Red oil, .826 s.g.
Mark II 41-2-AV*0-2.5 in wc. 
& 0-6300 fpm
Blue oil, 1.91 s.g.

Mark II Model 40-250PA-AV Dwyer Manometer Range 0-250 Pa,0-21 mps

 
 
Minimum Order Quantity1 Number
MaterialMolded Plastic
Accuracy+-3% FS
Model Name/NumberMARK II MODEL 40-250PA-AV
BrandDwyer USA
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm)

Mark II Model 40-250PA-AV Dwyer Manometer Range 0-250 Pa,0-21 mps 
Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4″ (101 MM) Insertion Depth

Key Features:
  • Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps
  • Requires Pitot Tube, Not Included

Applications:
  • Air Velocity
  • Air Filter Guge

Other Details:
  • The Dwyer MARKII40250PAAV Molded Plastic Inclined Manometer, 0-260 Pa, 0-21 mps, Red Gauge Fluid, Requires Pitot Tube Provides Linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure measurements above and below atmospheric as well as differential pressure measurements. The MARK II 40-250PA-AV includes accessories to enable portable use of the unit.

Included:
  • 2 – Tubing connectors for 1/8 in. pipe or sheet metal ducts
  • 2 – Mounting screws
  • 2 – 4-1/2” lengths of clear plastic tubing
  • 1 – Plastic swing-out stand
  • 1 – Leveling screw
  • 1 – 1 ounce bottle of indicating fluid
  • 1 – Set of red and green pointer flags
  • 1 – User Manual
 

Mark II Model 40-25MM Dwyer Manometer Range 0-26 MM W.C

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationPaint Booths
BrandDwyer
Model Name/NumberMARK II MODEL 40-25MM
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)

Mark II Model 40-25MM  Dwyer Manometer Range 0-26 MM W.C Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4″ (101 MM) Insertion Depth

Key Features:
  • Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps
  • Requires Pitot Tube, Not Included

Applications:
  • Air Velocity
  • Air Filter Guge

Other Details:

The Dwyer MARKII40255MM Molded Plastic Inclined Manometer, 0-26 mm w.c., Red Gauge Fluid Provides linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements. The MARK II 40-255MM includes Accessories to Enable Portable Use of The Unit

Included:
  • 2 – Tubing connectors for 1/8 in. Pipe or Sheet Metal Ducts
  • 2 – Mounting Screws
  • 2 – 4-1/2” lengths of clear plastic Tubing
  • 1 – Plastic Swing-Out Stand
  • 1 – Leveling Screw
  • 1 – 1 ounce bottle of indicating fluid
  • 1 – Set of red and green pointer flags
  • 1 – User Manual
 

Mark II Model 41-2 Dwyer Manometer Range .2-0-2.4 Inches

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationAir Velocity Measurement
Model Name/NumberMARK II MODEL 41-2
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm)

Mark II Model 41-2 Dwyer Manometer Range .2-0-2.4 Inches Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4″ (101 MM) Insertion Depth

Key Features:
  • Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps
  • Requires Pitot Tube, Not Included

Applications:
  • Air Velocity
  • Air Filter Guge

Other Details:
  • The Dwyer MARKII412 Molded Plastic Inclined Manometer, .2-0-2.4 INCHES., Blue Gauge Fluid Provides linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements. The MARK II 412 includes Accessories to Enable Portable Use of The Unit

Included:
  • 2 – Tubing connectors for 1/8 in. Pipe or Sheet Metal Ducts
  • 2 – Mounting Screws
  • 2 – 4-1/2” lengths of clear plastic Tubing
  • 1 – Plastic Swing-Out Stand
  • 1 – Leveling Screw
  • 1 – 1 ounce bottle of indicating fluid
  • 1 – Set of red and green pointer flags
  • 1 – User Manual
 

Mark II Model 41-2-AV Dwyer Manometer 0-2.5 inch W.C

 
 
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationPaint Booths
BrandDwyer
Model Name/NumberMARK II MODEL 41-2-AV
Scale LengthApprox. 8-1/4″ (21 cm)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Weight1.04 lb (472 g)/1.23 lb (558 g)

Mark II Model 41-2-AV Dwyer Manometer 0-2.5 inch w.c The Dwyer Mark II Series provides linear calibration and excellent resolution throughout its range and is ideally suited for air velocity and air filter gage Applications.
 

Mark II Model 41-600PA Dwyer Manometer 20-0-600 Pa

 
 
Minimum Order Quantity1 Number
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationPaint Booths
BrandDwyer
Model Name/NumberMARK II MODEL 41-600PA
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm)


Mark II Model 41-600PA Dwyer Manometer 20-0-600 Pa

  • Dwyer MARK II 41-600PA Inclined Manometer (20-0-600 Pa) using Blue Gauge Fluid
  • Model: MARK II 41-600PA | Order No: 41-600PA


Designed to Give Fast, Accurate Indication of Differential Pressures. The Gage May be used as a Readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure.

Dwyer 41-600pa Manometer, Air Filter Gauge, 0-1

  • There are no moving parts – no mechanical linkages – nothing to wear out, jam or deteriorate from vibration.
  • They never need calibration.
  • 2 psi max. Pressure.
  • The mirror polished inclined scale allows the operator to easily read minute differences in differential pressure across the filter accurately without parallax error.
  • Over pressure safety traps


Specifications:

  • For Architects and Engineers
  • An Air Filter Gage for measuring the resistance to Air Flow through the filters shall be installed, one for each bank of filters. The gage shall be of inclined tube Differential Type (equipped with vent valves for zeroing) shall be of solid acrylic plastic construction with built-in level vial, shall have an adjustable mirror-polished scale, shall be furnished complete with two 5-foot lengths 1/4″ tubing, two static pressure tips, mounting hardware, additional bottle of Red Gage oil and instructions.


What”s Included With The Dwyer MARK II 41-600PA

  • Dwyer MARK II 41-600PA Inclined Manometer (20-0-600 Pa) Using Blue Gauge Fluid



Mark II Model 41-60MM Dwyer Manometer 0-60 MM

 
 
Minimum Order Quantity1 Number
MaterialMolded Plastic
Accuracy+-3% FS
Usage/ApplicationPaint Booths
BrandDwyer
Model Name/NumberMARK II MODEL 41-60MM
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm).

Mark II Model 41-60MM Dwyer Manometer 0-60 MM Dwyer MARK II 41-60MM Molded Plastic Inclined Manometer, 0-60 mm w.c., Blue Gauge Fluid

Product Features:
  • Range: 0-60 mm w.c.
  • Blue Gauge Fluid
  • Accuracy: ±3% FS
  • Pressure Limits:15 psi (100 kPa)
  • Rapid Shutoff Pressure Connections and integral overpressure safety Traps

Applications:
  • Air Velocity
  • Air Filter Gauge

The Dwyer MARKII4160MM Molded Plastic Inclined Manometer, 0-60 mm w.c., Blue Gauge Fluid provides linear calibration and excellent resolution throughout its range. This model is capable of pressure measurements above and below atmospheric as well as differential pressure measurements. The MARK II 41-60MM includes accessories to enable portable use of the unit.
  • 2 – Tubing connectors for 1/8 in. pipe or sheet metal ducts
  • 2 – Mounting screws
  • 2 – 4-1/2” lengths of clear plastic tubing
  • 1 – Plastic swing-out stand
  • 1 – Leveling screw
  • 1 – 1 ounce bottle of indicating fluid
  • 1 – Set of red and green pointer flags
  • 1 – User Manual

Model -A-489 Dwyer A-489 SS Straight Static Pressure Tip with Flange, 4″ (101 mm) Insertion Depth
 

Mark II M – 700Pa Dwyer Manometer 10-0-700 Pa

 
 
Minimum Order Quantity1 Number
Measuring Range10-0-700 PA
Accuracy3%
MaterialMolded Plastic
Usage/ApplicationPaint Booths
Model Name/NumberMARK II M – 700PA
BrandDwyer
Weight250 g

Mark II M – 700Pa Dwyer Manometer 10-0-700 Pa
  • Dwyer MARK II M-700PA Inclined/Vertical Manometer (10-0-700Pa) Using Red Gauge Oil
  • Model: MARK II M-700PA

Construction – Mark II Manometers are Economically Priced, Compact and Available in Both Stationary and Portable Configurations. Construction is Simple with Virtually indestructible Molded white Styrene-Acrylonitrile Housing, indicating tube and fluid wells, Molded ABS Knobs and Zero adjust plunger, shock Mounted Glass level vial and Leak Proof “O” Ring Seals.

Description:
  • Dwyer MARK II M-700PA Molded Plastic Manometer, Range 10-0-700 Pa
  • The Dwyer Mark II M-700PA Molded Plastic Manometer has a Range of 10-0-700 Pa, Red Oil, .829 sp. gr.

Dwyer® Mark II Series Molded Manometers are of the inclined and inclined-Vertical Types. The curved inclined-vertical Tube of the Model 25 gage provides higher Ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for Air Velocity and Air Filter gage Applications. Both Gage Types are Capable of Pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements.

Included:
  • What”s included With the Dwyer MARK II M-700PA
  • Dwyer MARK II M-700PA Inclined/Vertical Manometer (10-0-700Pa) Using Red Gauge Oil
 

Mark II MM-180 Dwyer Manometer 0-180 MM W.C

 
 
Minimum Order Quantity1 Number
Accuracy+-3% FS
BrandDwyer
Model Name/NumberMARK II MM-180
Weight1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits10 psi (70 kPa)/15 psi (100 kPa)
Scale LengthApprox. 8-1/4″ (21 cm)


Mark II MM-180 Dwyer Manometer 0-180 MM W.C

  • Dwyer Mark II MM-180 Inclined/Vertical Manometer (0-180mm w.c.) Using Blue Gauge Oil
  • Model: MARK II MM-180


Construction – Mark II Manometers are Economically Priced, Compact and Available in Both Stationary and Portable Configurations. Construction is Simple with Virtually indestructible Molded white Styrene-Acrylonitrile Housing, indicating tube and fluid wells, Molded ABS Knobs and Zero adjust plunger, shock Mounted Glass level vial and Leak Proof “O” Ring Seals.


Description:

  • Dwyer MARK II MM-180 Molded Plastic Manometer 0-180 mm w.c.
  • The Dwyer Mark II MM-180 Molded Plastic Manometer Has a Range of 0-180 mm w.c., Blue Oil, 1.91 sp. gr.

 

Dwyer® Mark II Series Molded Manometers are of the inclined and Inclined-Vertical Types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for Air Velocity and Air Filter Gage Applications. Both gage types are capable of pressure measurements above and below atmospheric as well as Differential Pressure Measurements.

Included:

  • What”s Included With The Dwyer MARK II MM-180
  • Dwyer Mark II MM-180 Inclined/Vertical Manometer (0-180mm w.c.) Using Blue Gauge Oil

Mark II MM-80 Dwyer Manometer 0-80 MM W.C

 
 
Minimum Order Quantity1 Piece
MaterialMolded Plastic
Accuracy3%
Usage/ApplicationPaint Booths
Pressure Range0-80 MM W.C
BrandDwyer
Model Name/NumberMARK II MM-80
Weight250 f

Mark II MM-80 Dwyer Manometer 0-80 MM W.C

Dwyer Mark II MM-80 Inclined/Vertical Manometer (0-80mm w.c.) using Red Gauge OilModel: MARK II MM-80
  • Dwyer Mark II MM-80 Inclined/Vertical Manometer (0-80mm w.c.) Using Red Gauge Oil
  • Model: MARK II MM-80

Construction – Mark II Manometers are Economically Priced, Compact and Available in Both Stationary and Portable Configurations. Construction is Simple With Virtually Indestructible Molded White Styrene-Acrylonitrile Housing, Indicating Tube and Fluid Wells, Molded ABS Knobs and Zero Adjust Plunger, Shock Mounted Glass level vial and Leak Proof “O” Ring Seals.

Description:
  • Dwyer MARK II MM-80 Molded Plastic Manometer, 0-80 mm w.c.
  • The Dwyer Mark II MM-80 Molded Plastic Manomater has a range of 0-80 mm w.c., red oit, .829 sp. gr.

Dwyer® Mark II Series Molded Manometers are of The Inclined and Inclined-Vertical Types. The curved inclined-vertical tube of the Model 25 Gage Provides Higher Ranges with More Easily Read increments at low readings. The Model 25 is excellent for General Purpose work. The Model 40 inclined Gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for Air Velocity and Air Filter Gage Applications. Both gage Types Are Capable of Pressure Measurements above and below atmospheric as well as Differential Pressure Measurements.

What”s included with the Dwyer MARK II MM-80
  • Dwyer Mark II MM-80 Inclined/Vertical Manometer (0-80mm w.c.) Using Red Gauge Oil
 

Magnehelic Differential Pressure Gauge India

Series 3000MR/3000MRS Photohelic Switch Gage

 
 
ConnectionNew
BrandDwyer USA
Measuring RangeSeries 3000MR/3000MRS
Model Name/NumberSeries 3000MR/3000MRS
Size4″ (101.6 mm) dial face, 5″ (127 mm) OD x 3-1/8″ (79.38 mm)
Accuracy+-2% of FS (3000-0 +-3% of FS). (3000-00 +-4% of FS)
Weight1.8 Ib (816 g)
I Deal InNew Only
Wetted MaterialsConsult Factory
Pressure Limit-20″ Hg. to 25 psig (-0.677 bar to 1.72 bar). MP option: 35 psig (2.41 bar), HP option: 80 psig
Temperature Limits20 to 120 deg F (-6.67 to 48.9 deg C)
Process Connections1/8″ female NPT (duplicated side and back).
Power Requirements24 VDC, regulated +-10%


Series 3000MR/3000MRS Photohelic Switch Gage


Series 3000MR/3000MRS Photohelic Switch Gage Using solid state technology, the Series 3000MR And 3000MRS Photohelic® Switch/Gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic® gage design. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation – will indicate accurately even if power is interrupted. Solid state design now results in greatly reduced size and weight. Units can be flush mounted or surface mounted with hardware supplied. 3000MR models employ versatile electromechanical relays with gold over silver contacts – ideal for dry circuits. For applications requiring high cycle rates, choose 3000MRS models with SPST (N.O.) solid state relays. All models provide both low and high limit control and include 18-inch (45 cm) cable assemblies for electrical connections. Compatible with air and other non-combustible, non-corrosive gases, they can be used in systems with pressures to 25 psig (1.725 bar). Optional construction is available for use to either 35 psig (2.42 bar) or 80 psig (5.51 bar).

Included Accessories: mounting ring, snap ring; 18″ (45 cm) cable assembly; (2) 3/16″ tubing to 1/8″ NPT adapters; (2) 1/8″ NPT pipe plugs; (4) 6-32 x 1-1/4″ RH machine screws (panel mounting); and (3) 6-32 x 5/16″ RH machine screws (surface mounting).

Please see SERIES AT23000MR/MRS for ATEX approved.

Product Applications:

  • Pneumatic Conveying
  • Air Conditioning Systems
  • Clean Rooms



 ModelDescription 
 3000MR-0Pressure switch/gage, range 0-0.5″ w.c., .01 minor divisions. 
3001MRPressure switch/gage, range 0-1″ w.c., .02 minor divisions. 
 3002MRPressure switch/gage, range 0-2″ w.c., .05 minor divisions. 
 3003MRPressure switch/gage, range 0-3″ w.c., .10 minor divisions. 
 3005MRPressure switch/gage, range 0-5″ w.c., .10 minor divisions. 
 3010MRPressure switch/gage, range 0-10″ w.c., .20 minor divisions. 
 3015MRPressure switch/gage, range 0-15″ w.c., .50 minor divisions. 
 3020MRPressure switch/gage, range 0-20″ w.c., .50 minor divisions. 
 3030MRPressure switch/gage, range 0-30″ w.c., 1.0 minor divisions. 
 3050MRPressure switch/gage, range 0-50″ w.c., 1.0 minor divisions. 
  3100MRPressure switch/gage, range 0-100″ w.c., 2.0 minor divisions. 

Series 616KD Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy616KD-A: +-0.25% FS; 616KD-B: +-1% FS, 616KD: +-2% FS
BrandDwyer USA
Model Number/NameSeries 616KD
Wetted MaterialsConsult Factory
Stability+-1% FS/year
Temperature Limits0 to 140 deg F (-17.8 to 60 deg C)
Compensated Temperature Range20 to 122 deg F (-6.67 to 50 deg C)
Pressure Limits2 psig (ranges 5 in w.c. or lower); 5 psig (ranges 10 to 40 in w.c.)
Current Consumption24 mA max.
Warm Up Time20 minutes.
Enclosure RatingNEMA 1 (IP20)
Weight1.8 oz (51 g).

Series 616KD Differential Pressure Transmitter One-Touch® Digital Push-Button Calibration Technology, ±0.25, ±1, or ±2% Accuracy The Series 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.

Product Applications:
  • Air handlers
  • Duct pressure
  • Variable air volume
  • Filter monitoring

 

 ModelDescription 
 616KD-00Differential pressure transmitter, 0 to 1″ w.c., 4-20 mA. 
 616KD-01Differential pressure transmitter, 0 to 2″ w.c., 4-20 mA. 
 616KD-02Differential pressure transmitter, 0 to 3″ w.c., 4-20 mA. 
 616KD-03Differential pressure transmitter, 0 to 5″ w.c., 4-20 mA. 
 616KD-04Differential pressure transmitter, 0 to 10″ w.c., 4-20 mA. 
 616KD-05Differential pressure transmitter, 0 to 15″ w.c., 4-20 mA. 
 616KD-06Differential pressure transmitter, 0 to 20″ w.c., 4-20 mA. 
 616KD-07Differential pressure transmitter, 0 to 25″ w.c., 4-20 mA. 
 616KD-10Differential pressure transmitter, 0 to 250 Pa, 4-20 mA. 
 616KD-11Differential pressure transmitter, 0 to 500 Pa, 4-20 mA. 
 616KD-12Differential pressure transmitter, 0 to 750 Pa, 4-20 mA. 
 616KD-13Differential pressure transmitter, 0 to 1250 Pa, 4-20 mA. 
 616KD-14Differential pressure transmitter, 0 to 2500 Pa, 4-20 mA. 
 616KD-15Differential pressure transmitter, 0 to 5000 Pa, 4-20 mA. 
 

Series 629 Wet/Wet Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability).
BrandDwyer USA
Model Number/NameSeries 629
Thermal EffectAvg 0.04%/ deg F (0.072%/ deg C) (includes zero and span)
DisplayOptional 4-1/2 digit LCD field attachable display.
Stability+-1% FS/yr
Temperature Limits0 to 200 deg F (-18 to 93 deg C).
Power Requirements10 to 35 VDC (2-wire); 13 to 35 VDC, or isolated 16 to 33 VAC (3-wire).
Output Signal4 to 20 mA (2-wire); Field selectable: 0 to 5, 1 to 5, 0 to 10, or 2 to 10 VDC (3-wire)
Current Consumption28 mA max
Weight10.1 oz (286 g).


Series 629 Wet/Wet Differential Pressure Transmitter 0.5% Accuracy, NEMA 4X Enclosure The SERIES 629 Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction. This series is being phased out in 2017, see Series 629C for additional ranges. California Residents: Click Here for Proposition 65 WARNING.

Product Applications

  • Flow Elements
  • Heat Exchangers
  • Filters
  • Pumps
  • Coils
  • Chiller
Model Description 
629-04-CH-P2-E5-S5 Wet/wet differential pressure transmitter, range 50 psid, conduit housing, 1/4″ NPT female process connections, 0-10 V output. 

Series A3000 Photohelic Pressure Switch-Gage

 
 
Measuring RangeSeries A3000
Model Name/NumberSeries A3000
Usage/ApplicationIndustrial
ConnectionNew
Display TypeYAS
Model No.Series A3000
BrandDwyer USA
Accuracy+-2% of full scale at 70 deg F (21.1 deg C). +-3% on -0 and +-4% on -00 models
Weight4 lb (1.81 kg)
Size4″ (101.6 mm) dial face,5″ (127 mm) O.D. x 8-1/4″ (209.55 mm)
Wetted MaterialsConsult Factory
Temperature Limits20 to 120 deg F (-6.67 to 48.9 deg C). Low temperature option available
Process Connections1/8″ female NPT
Electrical Rating10A @ 28 VDC,10A @ 120,240 VAC
Repeatability+-1% of full scale
Power Requirements120 VAC,50/60 Hz; 240 VAC & 24 VAC power optional


Series A3000 Photohelic Pressure Switch-Gage


Series A3000 Photohelic Pressure Switch-Gage 3-in-1 Indicating Gage, Lo-limit and Hi-limit Control The SERIES A3000 Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width – less than 1% of full scale. Set points can be interlocked to provide variable deadband – ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25 in (0-6 mm) w.c. up to 30 psi (21 bar). Please see SERIES AT3A3000 for ATEX approved. DID YOU KNOW that you can add YOUR logo to our Photohelic Switch/Gage, call customer service for details.

Product Applications:

  • Air Conditioning Systems
  • Clean Rooms
  • Fume Exhaust Systems

 

ModelDescription
A3000-0Pressure switch/gage, range 0-.50″ w.c.
A3000-00Pressure switch/gage, range 0-.25″ w.c.
A3001Pressure switch/gage, range 0-1.0″ w.c.
A3002Pressure switch/gage, range 0-2.0″ w.c.
A3003Pressure switch/gage, range 0-3.0″ w.c.
A3004Pressure switch/gage, range 0-4.0″ w.c.
A3005Pressure switch/gage, range 0-5.0″ w.c.
A3006Pressure switch/gage, range 0-6.0″ w.c.
A3008Pressure switch/gage, range 0-8.0″ w.c.
A3010Pressure switch/gage, range 0-10″ w.c.
A3015Pressure switch/gage, range 0-15″ w.c
A3020Pressure switch/gage, range 0-20″ w.c.
A3025Pressure switch/gage, range 0-25″ w.c.
A3030Pressure switch/gage, range 0-30″ w.c
A3040Pressure switch/gage, range 0-40″ w.c.
A3050Pressure switch/gage, range 0-50″ w.c.
A3060Pressure switch/gage, range 0-60″ w.c.
A3080Pressure switch/gage, range 0-80″ w.c
A3100Pressure switch/gage, range 0-100″ w.c
A3150Pressure switch/gage, range 0-150″ w.c



DWYER Mack Magnehelic Gauges 0 To 8 MMWC

 
 
Minimum Order Quantity12 Number
Model Name/NumberDWYER Mack Magnehelic Gauges 0 To 8 MMWC
Usage/ApplicationIndustrial
ConnectionNew
Display TypeAnalog
TypeDWYER Mack Magnehelic Gauges
Measuring Range0 to 8 MMWC
ColorBlack
Scale Range0 To 8 MMWC
Diameter100 MM
MaterialSteel
BrandDwyer USA
Material Grade2000
I Deal InNew Only
Country of OriginMade in India
Dial size4′


DWYER Mack Magnehelic Gauges 0 To 8 MMWC


Product Description:

Specification:

  • Dial size : 4”
  • Range – 0 – 6 MM WC
  • Range – 0 – 8 MM WC
  • Range – 0 – 25 MM WC
  • Range – 0 – 50 MM WC
  • Range – 0 – 100 MM WC
  • Range – 0 – 60 PAC

Baumer Make Pressure Gauges

 
 
Minimum Order Quantity24 Unit
BrandBaumer
Measuring Range0/15 PSI
Model Name/NumberBaumer Make
Usage/ApplicationIndustrial
MaterialSteel
ConnectionNew
Display TypeAnalog
TypeBaumer Make
ColorSilver
Accuracy+-1.6% of F. S.
Protection RatingIP65
I Deal InNew Only
Battery IncludedYes
Operating Temperature-20 deg C to +50 deg C

Baumer Make Pressure Gauges

Product Description

Specifications:

  • SS Case Brass Pressure Gauge Bourdon type,
  • Standard Version: 50mm, 63 mm, 80mm & 100mm,
  • Accuracy ±1.6% of F. S. (For NS 63mm, 80mm & 100mm) & ±2.5% of F. S. (For NS 50mm),
  • Ambient Temperature – 20°C to + 65°C
  • Item Code: AT
Special Features

Case & measuring system in SSDry or liquid filledStandard followed in general EN 837 – 3

Application

Suitable for clean air Compatible gases Fertilizer Petrochemicals Pharmaceutical Power Cement Sugar Food & beverages Pulp Paper
 

Capsuhelic Differential Pressure Gauge

 
 
Display TypeAnalog
BrandDwyer USA
Accuracy+-3% of FS at 70 DegreeF (21.1 DegreeC). (+-4% on 4200, 4210, 4215, 4220, 4300, 4400, and 4500)
Weight3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case.
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie Cast Aluminum With Impregnated Hard Coating
Wetted MaterialsConsult Factory
Pressure Limits-20″ Hg to 500 psig (-0.677 bar to 34.4 bar)
Temperature Limits20 to 200 deg F (-6.67 to 93.3 deg C)

Capsuhelic Differential Pressure Gauge

Series 4000 Capsuhelic® Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic® Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Product Applications

  • Fluid flow
  • Liquid storage tanks
  • Filter pressure drops
  • Vacuum or differential pressure

Specifications Service:


  • Aluminum Case: Air and compatible gases and oil based liquids.
  • Brass Case: Air and compatible gases and water based liquids.
  • Wetted Materials:Consult factory.
  • Housing: Die cast aluminum with impregnated hard coating, standard. Optional forged brass housing is required for water or water based fluids.
  • Special material diaphragms available, contact factory.
  • Accuracy: ±3% of FS at 70°F (21.1°C). (±2% on 4000S models, ±4% on 4200, 4210, 4215, 4220, 4300, 4400, and 4500).
  • Pressure Limits:-20″ Hg to 500 psig. (-0.677 bar to 34.4 bar).
  • Temperature Limits:20 to 200°F (-6.67 to 93.3°C)
  • Size:4″ (101.6 mm)
  • diameter dial face.
  • Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections:1/4″ female NPT high and low pressure taps, duplicated – one pair top for air and gas, and one pair bottom for liquids.
  • Weight: 3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case.
  • Standard Accessories:Two 1/4″ NPT plugs for duplicate pressure taps, four flush mounting adapters with screws and four surface mounting screws.

Feature:

  • Gage capsule permits high-pressure usage with small differentials
  • Zero and range adjustments outside of gauge means no disassembly in normal service
  • Time-proven, simple, frictionless movement that permits full scale readings as low as 0.5 in w.c.
  • Diaphragm-actuated versus liquid filled gauge supports outdoor use
  • Options ASF Adjustable Signal Flag
  • B Brass Case
  • Scale Overlays Red, Green, Mirrored or Combination, Specify Locations
 

Aerosense Differential Pressure Switch Model PS 300

 
 
Minimum Order Quantity12 Number
BrandAerosense Mack
Model NoSeries PS
Cable EntryM16
Maximum Pressure50 kPA
MaterialABS


We are one of the leading manufacturer and supplier of Aerosense Differential Pressure Switch Model PS 300. We obligated to meet the quality standards as per the customer demand.

Dwyer Manganese Differential Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Model Name/Number608-00
Protection TypeIP65
BrandDwyer
Output Signal TypeDigital Type
MaterialMetal
Range1″ WC
Power Supply12-36 VDC
Signal4-20mA

Differential Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Usage/ApplicationAir and non-combustible,compatible gases.
Model Name/NumberSeries 616KD
Voltage4-20 mA output: 10 – 35 VDC (2 wire)
Accuracy+-2% FS
Product Weight1.8 oz (51 g).
Part TypeSeries 616KD
BrandDwyer USA
Stability+-1% FS/year
Temperature Limits32 to 122 deg F (0 to 50 deg C)
Pressure Limits2 psi (13.8 kPa)

Differential Pressure Transmitter

Series 616KD Differential Pressure Transmitter

One-Touch® Digital Push-Button Calibration Technology, ±0.25, ±1, or ±2% Accuracy

The Series 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.

Product Applications
  • Air handlers,Duct pressure,Variable air volume,Filter monitoring
Specifications

  • Service:Air and non-combustible,compatible gases.
  • Wetted Materials:Consult factory.
  • Accuracy:616KD-A:±0.25% FS; 616KD-B: ±1% FS, 616KD: ±2% FS.
  • Stability:±1% FS/year.
  • Temperature Limits:0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Range:20 to 122°F (-6.67 to 50°C).
  • Pressure Limits:2 psig (ranges 5″ w.c. or lower); 5 psig (ranges 10 to 40″ w.c.).
  • Thermal Effect:616KD-A:±0.02% FS/°F; 616KD-B: ±0.04% FS/°F; 616KD:±0.06% FS/°F, includes zero and span.
  • Power Requirements:4-20 mA output:10 – 35 VDC (2 wire) or 12-26 VAC (4 wire); 5V output:10 – 35 VDC (3 wire) or 12-26 VAC (4 wire); 10V output:13 – 35 VDC (3 wire) or 12-26 VAC (4 wire) for 616KD A and B. 16 to 36 VDC (2 or 3 wire): 20 to 28 VAC (3 wire) for 616KD.
  • Output Signal:4 to 20 mA or option with field selectable 0 to 10, 0 to 5, 2 to 10, 1 to 5 V.
  • Zero and Span Adjustments:Push button
  • Loop Resistance:4 to 20 mA output (DC): 0 to 1250 Ω max. Rmax =50(VpsDC -10) Ω;4 to 20 mA output (AC): 0 to 1200 Ω max. Rmax =50(1.4 VpsAC -12) Ω; Voltage output: 5K Ω minimum
  • Current Consumption:24 mA max for 616KD A and B. 21 mA max for 616KD.
  • Electrical Connections:Screw-type terminal block.
  • Process Connections:Barbed, dual size to fit 1/8″ & 3/16″ (3 mm and 5 mm) ID rubber or vinyl tubing.
  • Enclosure Rating:NEMA 1 (IP20).
  • Mounting Orientation:Vertical with pressure connections pointing down.
  • Weight:1.8 oz (51 g).
  • Agency Approval:CE, optional plenum rated units meet UL Standard 2043
Features
  • Simple calibration push-button sets back zero and span, saving time installing and over the service life
  • Cost effective and compact device suitable for OEM applications where space, simplicity, and value are key
  • Ranges and accuracy selection cover a wide range of applications minimizing components and determining standardizing on design
  • Optional 1/8″ NPT process connection allows for use with metal barbed fittings or compression fittings for use with metal tubing
  • Optional plenum rated units meeting UL Standard 2043 are available.
Model Number Description

  • A-618 Protective terminal cap
  • A-489 4″ 303 SS straight static pressure tip with flange.
  • SCD-PS 100 to 240 VAC/VDC to 24 VDC power supply.
  • A-360 Aluminum DIN rail
  • A-302F-A 303 SS Static pressure tip with mounting flange, for 3/16″ I.D. rubber or plastic tubing. 4″ insertion depth, includes mounting screws
  • A-480 Plastic static pressure tip.
 

Dwyer Industrial Pressure Transmitter

 
 
Minimum Order Quantity12 Number
BrandDwyer USA
Product Weight10 oz (283 g)
Response Time50 ms
Measuring MediumGas
Pressure Range-0.1MPa-100MPa
Wetted MaterialsSS 316L
Temperature Limit0 to 200 deg F (-18 to 93 deg C)
Compensated Temperature Range0 to 175 deg F (-18 to 79 deg C)
Thermal Effect+-0.02% FS/ deg F (includes zero and span)
Output Signal4-20 mA, 0-5 VDC,1-5 VDC, 0-10 VDC, or 0.5-4.5 VDC
Agency ApprovalsCE
Enclosure RatingNEMA 4X (IP66)

Sound infrastructure has helped us in presenting clients with the premium quality of Dwyer Industrial Pressure Transmitter. The Dwyer industrial pressure transmitter is known for its compact design and longer functional life. By following total quality management, the quality of the industrial pressure transmitter is never compromised.

Features:
  • Easy to operate and maintenance
  • Compact design
  • Enhanced functional life
 

Magnehelic Differential Pressure Indicating Transmitter

 
 
Minimum Order Quantity1 Number
Product Weight1 lb, 12.6 oz (811 g)
Stability+-1% F.S./yr
Temperature Limits20 to 120 deg F (-6.67 to 48.9 deg C)

The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4-20 mA control loop powered by a 10-35 VDC supply.

 

Dwyer Magnehelic Differential Pressure Gauges 50 To 50 MMWC

 
 
BrandDwyer USA
Measuring Range50 to 50 MMWC
Model Name/Number2300-100MM
Usage/ApplicationIndustrial
ConnectionNew
Display TypeAnalog
Type2300-100MM
ColorBlack
Scale Range50 To 50 MMWC
Diameter100 MM
Dial Size4′
I Deal InNew Only
Country of OriginMade in India
Pressure Gages50 to 50 MMWC


Dwyer Magnehelic Differential Pressure Gauges 50 To 50 MMWC

Two 1/8″ NPT Plugs, Two 1/8″ Rubber Tubing Adapters, And Three Mounting Adapters With Screws

MORE ABOUT THIS ITEM

The Magnahelic Guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.

The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.


Specifications & Description 

 

 Accuracy±2% full-scale
 Dial Size (in)
 Dial Size (mm)102 
Min Pressure (in WC)
 Max Pressure (in WC)10 
Wetted Materials Aluminum
 Case Aluminum
 Lens Materialacrylic
 Process Connection1/8″ NPT
 Unit Of Measurement ” WC
 Displayanalog dial
 Media Compatibility Gases and liquids compatible with wetted materials
 Resolution 0.20
 Description Magnehelic Differential Pressure Gauge, Type , 50-0-50 MM WC

Low Pressure Differential Gauge

 
 
Minimum Order Quantity12 Piece
Dial Size2.5 inch / 63 mm
BrandDwyer
Display TypeAnalog
Pressure TypeGauge Pressure
Connection TypeNPT
Connection Size1/8 inch
Dial TypeDry
Accuracy+/- 2% full scale display (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Measuring Range0-1000 PA
Usage/ApplicationIndustrial
Material of casingStainless Steel
Model Name/Number2000
Pointer MaterialAluminium Black
Weight1 lb 2 oz (510 g)
Warranty1 years
Media CompatibilityAir And Compatible Gasses
Housing MaterialDie cast aluminum case and bezel (ABS for P2000),with acrylic cover
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
ApprovalsRoHS,CE


Low Pressure Differential Gauge

Product DescriptionLow Pressure Differential Gauge:
Low Pressure Differential Gauge For Pharma Companies.

Specifications:

• Pressure: 01.5kPa
• Measuring Medium: Steam
• Color: Grey
Accuracy :-  +/- 2% full scale display

DWYER Make Magnehelic Gauges 0 To 250 MM WC

 
 
Minimum Order Quantity12 Number
Measuring Range0 to 250 MMWC
Model Name/Number2000
Usage/ApplicationIndustrial
MaterialAluminium
ConnectionNew
Display TypeAnalog
TypeDWYER Make Magnehelic Gauges 0 To 250 MM WC
ColorBlack
Scale Range0 To 250 MM WC
Diameter100 MM
Dial Size4”
Size100 MM
BrandDwyer USA
I Deal InNew Only
Country of OriginMade in India
Magnehelic Gages0 to 250 MMWC

DWYER Make Magnehelic Gauges 0 To 250 MM WC

Model: 2000-250 MM

Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Dwyer 2000-250 MM MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 0/250 MM
  • Precision litho-printed scale is accurate and easy to read.
  • Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • “Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
  • Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
  • Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
  • Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
  • Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
  • Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
  • Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
  • Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
  • Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
  • O-ring seal for cover assures pressure integrity of case.
 

Minihelic II Differential Pressure Gauges

 
 
Minimum Order Quantity12 Number
BrandDwyer USA
Model Name/NumberSeries 2-5000
Usage/ApplicationIndustrial
Display TypeAnalog
Accuracy1.6
Pressure Range0-16kg / 220psi
Indicating Pressure ReferenceGeneral Pressure Gauge

We have in our stores a wide assortment of Minihelic II Differential Pressure Gauges. Designed especially for panel mounting in a single 2-3/8” diameter hole, these gauges come with small size and can easily be operated up to 30 psig pressure. These gauges are manufactured by us using superior quality raw material procured by the trusted vendors of the market in accordance to international quality standards.

Features:
  • Combining high accuracy
  • Compactness
  • Dependability
 

Differential Pressure Sensor

 
 
Minimum Order Quantity12 Number
BrandDwyer
MaterialStainless Steel
Material GradeSS304
Surface FinishPolished
Protection DegreeIP65
Current Consumption80mA @24VDC

DWYER Mack Magnehelic Gages 0 To 1000 PAC

 
 
Minimum Order Quantity12 Number
MaterialConsult factory.
BrandDwyer Mack USA
ModelSeries S2000
Dimensions4-3/4″ dia. x 2-3/16″ deep
Weight1 lb 2 oz
FinishedBaked Dark Gray Enamel
Connections1/8″ Npt High And Low Pressure Taps, Duplicated, One Pair Side And One Pair Back
AccuracyPlus or minus 2% of full scale, at 70 deg F. (Model 2000-0, 3%; 2000-00, 4%).
Pressure Rating15 PSI (0,35 bar)
Ambient Temperature Range20 deg to 140 deg F (-7 to 60 deg C)
Display TypeAnalog

DWYER Mack Magnehelic Gages 0 To 1000 PAC

DWYER Mack Magnehelic Gages 0 To 1000 PAC

Product Description:
Specification:

Dial size : 4′
Range – 0 – 1000 PAC
Range – 0 – 6 MM WC
Range – 0 – 8 MM WC
Range – 0 – 25 MM WC
Range – 0 – 50 MM WC
Range – 0 – 100 MM WC
Range – 0 – 60 PAC

Additional Information:

 

Sensocon Mack Magnehelic Gauge Wholesale INDIA

Low Cost Sensocon Differential Pressure Gauge

 
 
Usage/ApplicationIndustrial
BrandSensocon
Accuracy+/-2%
Temperature20 to 140degF
Weight510 g
Pressure Limit-20″ hg

We are one step ahead of our competitors in supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure.
 

Sensocon Differential Pressure Gauge

 
 
Measuring Range(mm)0 – 6 mm WC
BrandSensocon
Accuracy2% of FS (+-3% on – 0
Weight0.55 kg
Max Pressure15 psig
Range30Pa~80KPa

We are one step ahead of our competitors in manufacturing and supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure.
 

Sensocon Mack USA Magnehelic Gages -100 To 100 MMWC

 
 
Minimum Order Quantity12 Number
BrandSensocon Mack USA
Measuring Range100 To 100 MMWC
Model Name/NumberS2000
MaterialMild Steel
ConnectionNew
Display TypeNO
Usage/ApplicationCommerial
Pressure Limit-20″ Hg
Accuracy+/-2%
Weight510 g
Warranty2 year
Dial ShapeRound

Sensocon Mack Magnehelic Differential Pressure Gages -100 To 100 MMWC

Product Description:
Specification:

Dial size : 4”
Range -50 To 50 MMWC
Range -100 To 100 MMWC
Range – 0 – 6 MM WC
Range – 0 – 25 MM WC
Range – 0 – 50 MM WC
Range – 0 – 100 MM WC
Range – 0 – 60 PAC
 

Setra Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Voltage24 VDC
BrandSetra
Output Type4-20 mA
Input Pressure (Pascal)100kpa~ 0-1kpa~10MPa
PressureTransmitter
Range0-50 psid

To get accurate readings over a wide temperature range Setra Pressure Transmitter is a thin-film sensor has high-end capabilities.It provides stability in the most of the applications of large volume OEM installations.Made from the quality components the transmitter features lists a number of positive attributes such as thicker diaphragm and a restrictor optional to measure the extreme temperature where positive or negative pressure spikes is a concern for environmentalists.

Features:
  • Poly carbonate front & back cover
  • Double pressure limits
  • Four digit display
 

Series DPT Range Differential Pressure Transmitter

 
 
Operating Range14deg to 122degF
Response Time0.8 – 4.0, jumper selectable
Maximum Pressure100 in w.c.
Power Supply24 VDC or VAC, +/- 10%
Enclosure RatingIP 54/ NEMA 3
Display3 1/2 Digit LCD Backlit LCD

The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry. With field selectable ranges down to 0.1 inches w.c., this product is ideal for monitoring building pressure, static pressure, differential pressure, or air velocity and flow. The Series DPT Differential Pressure Transmitter also has jumper selectable outputs for 4-20 mA or 0-10 V and unit selection giving additional flexibility. For a virtually maintenance free transmitter, order the optional automatic zero and the transmitter will perform its own zero point maintenance. The Multi-Range Differential Pressure Transmitter also has an optional backlit LCD for giving local indication.
 

Sensocon Usa Differential Pressure Gauge 0 To 50 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range0-50 MM
Model Name/NumberS2000
Usage/ApplicationIndustrial
MaterialMild Steel
ConnectionNew
Display TypeNO
Measuring Range(mm)0 to 50 MM WC
BrandSensocon USA
Model No.S2000-50MM
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case
Media CompatibilityDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
ApprovalsRoHS, CE
AccessoriesTwo 1/8″ NPT barbed fittings,two 1/8″ NPT plugs, and three mounting tabs and screws


SENSOCON USA DIFFERENTIAL PRESSURE GAUGE 0 To 50 MM WC

 

Service:

Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi

Wetted Materials:

Consult factor

Housing:

Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test

Accuracy:

±2% of FS (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C

Pressure Limits:

-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).

Overpressure:

Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection Note on next page

Temperature Limits:

20 to 140°F* (-6.67 to 60°C). -20°F (-28°C) with low temperature option

Size:

4 (101.6 mm) diameter dial face

Mounting Orientation:

Diaphragm in vertical position. Consult factory for other position orientations

Standard Accessories:

Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter, and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)

Sensocon USA Differential Pressure Gauge 0 To 100 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 100 MM WC
Model No.S2000-100MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir And Compatible Gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT
ApprovalsRoHS, CE

Sensocon USA Differential Pressure Gauge 0 To 100 Mm Wc 
Select the MagnehelicA, gage for high accuracy–guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer’s simple, frictionless MagnehelicA, gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too. The MagnehelicA, gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note May be used with Hydrogen. Order a Buna-N diaphragm.

Pressures must be less than 35 psi.

  • Bezel provides flange for flush mounting in panel.
  • Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
  • Precision litho-printed scale is accurate and easy to read.
  • Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • “Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
  • Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
  • Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
  • Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
  • Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
  • Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
  • Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
  • Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
  • Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
  • O-ring seal for cover assures pressure integrity of case.
  • Applications
  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
 

Front Mount Differential Pressure Gauge

 
 
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight1 lb 2 oz (510 g)
Media CompatibilityAir and compatible gasses
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)
Process Connection1/8″


The Series S1000 Front Mount Differential Pressure Gauge makes panel mounting quick and easy. The S1000 is a diaphragm operated gauge for measuring positive, negative, or differential pressure. The S1000 was designed to allow quick installation saving time and money. This includes easy front mounting with 4 screws without any additional hardware required, and quick tubing connections with molded-in pressure fittings. The Series S1000 Front Mount Differential Pressure Gauge has a span adjustment on the back of the gauge for calibration adjustments. In addition to the time savings offered by the Series S1000 Differential Pressure Gauge, the gauge is based on the same rugged design as the S2000, which allows for years of trouble free operation.

Pressure Limits:

  • -20” Hg to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility:
  • Air and compatible gasses


Accuracy:

  • +/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70°F (21°C)
  • Temperature Ranges:
  • 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case with ABS flange and acrylic cover


Process Connection:

  • Duplicate high and low recessed, push on connections for 3/16” tubing – one pair side and one pair back
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: 2 connection plugs, 4 mounting screws, 4 screw caps, 2 static pressure connectors, and 3 feet of vinyl tubing
  • Agency Approvals:
  • RoHS, CE

Specifications:

  • Indicating Pressure Reference: Differential Pressure Gauge
  • Features of Measurement Medium: General Pressure Gauge
  • Installation Structure: Direct Mounting
  • Function: Local Indication Type

Miniature Low Cost Differential Pressure Gauge Series S-5000

 
 
BrandSensocon
Model No.S-5000
Accuracy+/- 5% full scale throughout range at 70 DegreeF (21 DegreeC)
Weight6 oz (170 g)
Media CompatibilityAir and compatible non-corrosive gasses
Pressure Limits30 PSI (2.067 bar)
Temperature Ranges20 Degree to 120 DegreeF (-7 Degree to 49 DegreeC)
Process ConnectionBarbed connections for 3/16″ I.D. tubing


Features:

 • Mounts in Industry Standard Holes

• Accuracy 5%

• Low-Cost Miniature Size

The Series S-5000 is a low cost, diaphragm operated, differential pressure gauge in a miniature housing. The S-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.
Customizing Options Available.

Specifications:

 MODEL NUMBERSPressure RangeModel Number Pressure Range 
S-5000-0     0 – 0.5″ S-5000-25MM 0 – 25 mm 
 S-5001   0 – 1″  S-5000-50MM 0 – 50 mm 
 S-5002   0 – 2″   S-5000-100MM0 – 100 mm 
 S-5003 0 – 3″  
 S-5005 0 – 5″S-5000-125PA  0 – 125 Pa
 S-5010     0 – 10″   S-5000-250PA0 – 250 Pa 
   S-5000-500PA 0 – 500 Pa
  S-5000-1KPA 0 – 1 kPa 
  S-5000-3KPA 0 – 3 kPa 

Miniature Differential Pressure Gauge Series Sz5000

 
 
BrandSensocon
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Accuracy+/- 5% full scale throughout range at 70 DegreeF (21 DegreeC)
Weight6 oz (170 g)
Media CompatibilityAir and compatible non-corrosive gasses
Pressure Limits30 PSI (2.067 bar)
Process ConnectionBarbed connections for 3/16″ I.D. tubing


The Series Sz-5000 is a low cost, diaphragm operated, differential pressure gauge in a miniature housing with easy access to the zero adjustment. The Sz-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

Sensocon Mack Magnehelic Gages 0 To 6 MM WC

 
 
Minimum Order Quantity100 Number
Measuring Range0 To 6 MM WC
Model Name/Numbers2000
Usage/ApplicationIndustrial
BrandSensocon
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Barbed FittingsTwo 1/8″ NPT
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)

Sensocon Mack Magnehelic Gages 0 To 6 MM WCProduct DescriptionSensocon Mack Magnehelic Gages 0 To 6 MMWC

Product Description:

Dial size : 4”
Range – 0 – 6 MM WC
Range – 0 – 25 MM WC
Range – 0 – 50 MM WC
Range – 0 – 100 MM WC
Range – 0 – 60 PAC
 

Intrinsically Safe Differential Pressure Transmitter

 
 
Weight10 ounces
Pressure Fitting1/4″ – 18 NPT Internal
Shock50 g
Acceleration10g Maximum
Vibration2g from 5 Hz to 500 Hz
External Load0 to 1000 Ohms

Setra’s Model 204 pressure transducers are intended for accurate pressure measurements of gas or liquid media compatible with 17-4 PH stainless steel. The high level output signal and excellent stability, combined with fast dynamic response, make this unit ideal for industrial, laboratory and aerospace applications. The exceptional accuracy is achieved by combining Setra’s unique electronic circuitry with its patented variable capacitance sensor. This unit is compensated for both zero and sensitivity shifts due to environmental.
 

Differential Pressure Transmitter

 
 
Operating Range0 to +150 (-18 to +65)
Output Type4 to 20 mA
BrandSetra
Bidirectional Output at Zero12 mA
External Load0 to 800 Ohms
Output Impedance100 Ohms
Maximum Line Pressure10 psi


Setra Model 267 and 267MR pressure transducers sense gauge (static) or differential pressure and convert this pressure difference to a proportional electrical output. The 267 series is offered with a high level voltage output or 4-20 mA current output. The 267MR offers multi-range capability and field configurable 0-5 VDC or 0-10 VDC output, as well as a 4-20 mA output. The 267 is a single range unit and offers an optional LCD display. The 267 series has an IP65/NEMA 4 rated package to withstand environmental effects.

Sensocon Mack Magnehelic Gages 0 To 10 MMWC

 
 
Minimum Order Quantity100 Number
Dial Size4 inch / 100 mm
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size1/8 inch
Accuracy+/- 2% full scale
Weight1 lb 2 oz (510 g)
Warranty2 year
Media CompatibilityAir and compatible gasses
BrandSensocon
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)

The Series S2000 and P2000 differential pressure gauges are low-cost, diaphragm
operated, mechanical pressure gauges. The S2000 and P2000 gage can be used
in applications for measuring positive, negative, or differential pressure with an
accuracy of 2%. Standard applications include monitoring filter status, duct static
pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and
cabinet purging along with many others.
 

Sensocon Mack Magnehelic Guages -25 To 25 MMWC

 
 
Minimum Order Quantity12 Number
Measuring Range-25 To 25 MMWC
Model Name/NumberS2000
Usage/ApplicationIndustrial
ConnectionNew
Display TypeNO
BrandSensocon
ColorBlack
Scale Range-25 To 25 MMWC
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight1 lb 2 oz (510 g)
Dial Size100 MM
Warranty1 year
SeriesS2000
Packaging Type1
I Deal InNew Only
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)

Sensocon Mack Magnehelic Gages -25 To 25 MMWC

Series S2000 / P2000

Low-Cost Differential Pressure Gauge

• Mounts in Industry Standard Holes
• Accuracy 2%
• Die Cast Aluminum Housing (S2000)
• ABS Housing (P2000)

The Series S2000 and P2000 Differential Pressure Gauges are Low Cost, Diaphragm Operated, Mechanical Pressure Gauges. The S2000 and P2000 gage can be used in Applications For measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

SPECIFICATIONS

Pressure Limits: -20” Hg to 15 PSI (-0.677 bar to 1.034 bar)
Media Compatibility: Air and compatible gasses
Accuracy:+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70°F (21°C)
Temperature Ranges: 20° to 140°F (-7° to 60°C)
Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Process Connection: 1/8” female NPT duplicate high and low Pressure Taps – one pair side and one pair back.
Weight: 1 lb 2 oz (510 g)
Accessories: Two 1/8” NPT barbed fittings,two 1/8” NPT plugs, and three mounting tabs and screws
Approvals: RoHS, CE

ACCESSORIES

A-131 Static Pressure Tip With Barbed Connection

• A-105 Air Filter Kit
• A-103 Surface Mounting Bracket
• A-102 Hanging Bracket / Stand
• A-202 Short Shut Off Valve
• A-203 Long Shut Off Valve
 

Series VTP Air Velocity Transmitter

 
 
Temperature+/- 1.8 DegreeF (1 DegreeC)
Air Velocity3% F.S.; optional 1% F.S.
Output SignalIndependent 4-20 mA for velocity, temperature, and optional pressure
Power Supply24 VDC +/-20%
Response Time3 seconds
Max Pressure14.5 PSI (100 kPa)

The Series VTP Multi Range Air Velocity Transmitter can simultaneously display and output Air Velocity, Temperature and Pressure (optional). This is the first product to combine all 3 variables in one transmitter making the VTP an exceptional option for multi-variable measuring. The VTP utilizes an industrial 316 Stainless Steel armored RTD sensor as the thermal air velocity measuring component. Using a fully protected 316 SS sensor drastically extends the life of the air velocity sensor and also makes it insensitive to water, dust or corrosion. The VTP comes standard with a LCD and can simultaneously display air velocity, temperature, and pressure.
The VTP is easily configured or adjusted in the field with the digital display and keypad. The Air Velocity Range and Pressure Range are both field adjustable as well as units of measure. Other adjustable parameters include signal dampening and low velocity cut off point. The VTP Air Velocity Transmitter can also be configured to measure and totalize flow in CFM or M3/h by entering the duct area where the measurement is taken.
Installation of the VTP Air Velocity Transmitter is easy with the adjustable depth, removable flange. The standard product includes an integral design, but is also available with a remote mounted probe to accommodate any application

Media:Air and compatible, non-combustible gasesRange:Velocity: Min. 0 to 200 FPM (0-1 m/s) Max. 0 to 4000 FPM (0-20 m/s)
Pressure: Min 0 to 0.1″ w.c. (0-25 Pa) Max. 0 to 10″ w.c. (0-3 kPa)
Temperature: 14 to 122° F (-10 to 50° C) or optional -4 to 257° F (-20 to 125° C)Accuracy:Air Velocity: 3% F.S. optional 1% F.S.
Pressure: 1% F.S.
Temperature: +/- 1.8° F (1° C)Output:Independent 4-20 mA output for air velocity, temperature, and optional pressure Power Supply:24 VDC +/-20%Response Time:3 seconds Dampening:Adjustable 3 to 30 seconds Enclosure Rating:NEMA 4 (IP 65)Material:Sensor: 316 SS
Probe: 316 SS
Housing: 304 SS Max Pressure:14.5 PSI (100 kPa)Electrical Connection:12″ multiconductor cable Remote Mount Option:Includes transmitter mounting bracket and Hirschmann connectors on sensor and transmitter, and 9 foot cable.Agency Approvals:RoHS Environmental Temperature:14 to 122° F (-10 to 50° C)
 

Siren Airflow Alarm

 
 
BrandSensocon
Power12 – 24 VDC
Operating Temperature60 – 100 DegreeF (16 – 37 DegreeC)
Velocity Range40 – 2000 fpm (0.2 – 10.2 mps)
Input Current0.5 A Max
Repeatability2%

Siren™ Airflow Alarm

• High Visibility Status Indication

• Quick Installation

• Standard Night Set Back

• Audible Alarm

• Multiple Mounting Options

 

The Series AFA Siren™ Air Flow Alarm is an airflow monitor designed to provide visual and audible indications for decreases in airflow. Its color changing LED’s provide vibrant visual indication of the operating status of the unit. A crisp and clear audible alarm will sound when airflowdecreases below the designated set point. The Siren™ offers multiple mounting options including bracket mounting and interlocking strips. The unit can be powered through the 6-position terminal connection or by use of a power adapter. The Siren™ offers the ability to customize the minimum velocity set point should there be a need for a set point greater than the standard 80% of operational velocity. All units come standard with a night set back option for those who are energy conscious. The Siren also fulfills the exhaust alarm requirement needed to be in compliance with NSF/ANSI Standard 49. A quick installation process, one-touch calibration, and one-touch reset make for an easy set up and easy use.

 

1/8 DIN Digital Differential Pressure Control – Series B4

 
 
BrandSensocon
Accuracy1.0%
Temperature Range-10deg to 140degF
Thermal Effect+/-0.05%
Power Supply24 VDC
Response Time100 ms
Display4 digit

The Series B4 is a 1/8 DIN digital differential pressure controller for positive, negative, and differential pressure as well as velocity and flow. The patented Series B4 Differential Pressure Cotnroller includes (2) 8A SPDT relays, and an optional digitally scaleable 4-20 mA and 0-5 V output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. The Series B4 is easily mounted in a 1/8 DIN cut-out with a panel depth of only 2.1 inches (53 mm).
 

Dwyer Series 616 and 616C Differential Pressure Transmitter Wholesaler

Dwyer Series 616 and 616C Differential Pressure Transmitter

 
 
Model NumberSERIES 616 AND 616C
BrandDwyer
Accuracy1% accuracy
Electrical ConnectionScrew-Type Terminal Block.
Automation GradeManual
Power Supply10-35 VDC 2 Wire
Pressure Range0-200 inch WC
Pressure Limits2 psig

Series 616 Transmitter Features an Exceptional ±0.25% Accuracy in several Factory Calibrated Ranges. Choose the one just right for your Application. Span and Zero controls included for fine tuning and minor Re-Calibration in the field.

 

Series 616C Transmitter features an exceptional 1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Product Applications:

  • Compact housing makes unit ideal for variable air volume systems.
 

Dwyer Series 616C -1 Differential Pressure Transmitter Range 0-3 Inch wc

 
 
Model NumberSERIES 616C -1
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Range0-200 inch WC
Pressure Limits2 psig

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-3″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -2 Differential Pressure Transmitter Range 0-6 Inch wc

 
 
Model NumberSERIES 616C -2
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).


Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-6″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.


Dwyer Series 616C -3 Differential Pressure Transmitter Range 0-10 Inch wc

 
 
Model NumberSERIES 616C -3
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Limits2 psig
Pressure Range0-200 inch WC

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-10″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -4 Differential Pressure Transmitter Range 0-20 Inch wc

 
 
Model NumberSERIES 616C -4
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Limits2 psig
Pressure Range0-200 inch WC


Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-20″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.


Dwyer Series 616C -5 Differential Pressure Transmitter Range 0-40 Inch wc

 
 
Model NumberSERIES 616C -5
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Range0-200 inch WC
Pressure Limits2 psig

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-40″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -6 Differential Pressure Transmitter Range 0-100 Inch wc

 
 
Model NumberSERIES 616C -6
BrandDWYER
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Supply10-35 VDC (2-wire).
Product Weight1.8 oz (51 g).
Pressure Range0-200 inch WC
Pressure Limits2 psig


Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-100 INCH WC
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.

Dwyer Series 616C -7 Differential Pressure Transmitter Range 0-200 Inch wc

 
 
Model NumberSERIES 616C -7
BrandDWYER
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Supply10-35 VDC (2-wire).
Pressure Limits2 psig
Pressure Range0-200 inch WC

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-200 INCH WC
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -8 Differential Pressure Transmitter Range 0-10 psid

 
 
Model Name/NumberSERIES 616C -8
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Measuring Range0-10 PSID
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).


Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-10 PSID
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.

Dwyer Series 616C -9 Differential Pressure Transmitter Range 0-20 psid

 
 
Model Name/NumberSERIES 616C -9
BrandDWYER
Power10-35 VDC (2-wire).
Measuring Range0-20 PSID
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-20 PSID
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -10 Differential Pressure Transmitter Range 0-30 psid

 
 
Model Name/Number616C -10
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Measuring Range0-30 PSID
Product Weight1.8 oz (51 g).
Supply10-35 VDC (2-wire).

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-30 PSID
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -11 Differential Pressure Transmitter Range 0-50 psid

 
 
Minimum Order Quantity1 Number
Model Name/Number616C -11
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Measuring Range0-50 PSID
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-50 PSID
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.

Dwyer Series 616C -12 Differential Pressure Transmitter Range 0-100 psid

 
 
Model Name/Number616C -12
BrandDWYER
Power10-35 VDC (2-wire).
Measuring Range0-100 PSID
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).


Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 0-100 PSID
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.

Dwyer Series 616C -3B Differential Pressure Transmitter Range 1.5-0-1.5 in wc

 
 
Model NumberSERIES 616C -3B
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Limits2 psig
Pressure Range0-200 inch WC


Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 1.5-0-1.5″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.

Dwyer Series 616C -6B Differential Pressure Transmitter Range 3-0-3 in wc

 
 

Dwyer Series 616C -10B Differential Pressure Transmitter Range 5-0-5 in wc

 
 
Model NumberSERIES 616C -10B
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Limits2 psig
Pressure Range0-200 inch WC

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 5′-0-5″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Dwyer Series 616C -20B Differential Pressure Transmitter Range 10-0-10 in wc

 
 
Model NumberSERIES 616C -20B
BrandDWYER
Power10-35 VDC (2-wire).
Usage/ApplicationIndustrial Process Monitoring
Electrical ConnectionScrew-type terminal block.
Automation GradeManual
Product Weight1.8 oz (51 g).
Pressure Range0-200 inch WC
Pressure Limits2 psig

Series 616C Transmitters feature exceptional ±1% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.


Specifications:

  • Service: Air And Non-Combustible, Compatible Gases.
  • Wetted Materials: Call us at 9871034100
  • Accuracy: ±1.0% F.S.
  • Stability: ±1% F.S./yr.
  • Temperature Limits: 0 to 140°F (-17.8 to 60°C).
  • Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Range: 10′-0-10″ w.c.
  • Pressure Limits: 2 psig.
  • Thermal Effect: ±0.02% F.S./°F (±0.0012% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero Adjustments: Potentiometers for zero and span.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Process Connections: Barbed, dual size to fit 1/8″ and 3/16″ (3.12 mm and 4.76 mm) I.D. rubber or
  • vinyl tubing.
  • Weight: 1.8 oz (51 g).
  • Agency Approvals: CE on 616 only.
 

Differential Pressure Transmitter Wholesaler India

Dwyer DM-2001-LCD Differential Pressure Transmitter

 
 
Accuracy+-1% FS at 70degF
Product Weight136 g
Stability+-1% FS/yr
Temperature Limits20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Pressure Limits10 psig (0.69 bar).
Output Signal4 to 20 mA
Display3.5 digit LCD, 0.7″ H


The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges.

Dwyer DM-2002-LCD Differential Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2002-LCD
Weight4.8 oz (136 g).
Process Connections1/8″ ID tubing
Display3.5 digit LCD
Current ConsumptionDC: 38 mA max
Output Signal4 to 20 mA

Dwyer DM-2002-LCD Differential Pressure Transmitter
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models
 

Dwyer Dm-2007-LCD Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2007
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer Dm-2012-LCD Pressure Transmitter

 
 
Product Weight4.8 oz (136 g)
BrandDWYER
Model Number/NameDM-2012-LCD
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2003-LCD Differential Pressure Transmitter

 
 
Product Weight4.8 oz (136 g).
BrandDWYER
Model Number/NameDM-2003-LCD
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height.
Current ConsumptionDC: 38 mA maximum.

Dwyer DM-2003-LCD Differential Pressure Transmitter
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2013- LCD Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2013-LCD
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2004-LCD Pressure Transmitter

 
 
BrandDwyer
Model Number/NameDM-2004-LCD
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges.
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy.
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units.
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models.

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2005-LCD Pressure Transmitter

 
 
BrandDwyer
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges.
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy.
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units.
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models.

Specifications:
  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2019-LCD Pressure Transmitters

 
 
Product Weight4.8 oz (136 g)
BrandDWYER
Model Number/NameDM-2019
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

DWYER Differential Pressure Transmitter Series DM-2000

 
 
Product Weight4.8 oz (136 g)
BrandDwyer
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

The Dwyer SERIES DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges.

 

Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single push button allows field selection of 4 to 6 engineering units depending on range.

 

Dwyer DM-2006-LCD Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2006-LCD
Product Weight4.8 oz (136 g)
Loop ResistanceDC: 0-1250 ohms maximum
Current ConsumptionDC: 38 mA maximum
Electrical ConnectionsScrew-type terminal block
Display3.5 digit LCD, 0.7″ height
Process Connections1/8″ I.D. tubing
Mounting OrientationVertical

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Differential Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-0.02% FS/ DegreeF
Response Time250 ms
Current Consumption4 to 20 mA
Loop ResistanceDC: 0 to 1045 Q max
Output Signal4 to 20 mA DC
Power Requirements12 to 36 VDC (2-wire)
Thermal Effect0.5%


Cost Effective for B.A.S. Applications, Digital Push-Button Calibration with One- Touch Transmitter Technology.The Series 616K & 616OT Differential Pressure Transmitters with One-Touch technology are designed for simplicity making them the ideal choice for installers and maintenance professionals.The One-Touch Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product.

Beck Differential Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Usage/ApplicationBuilding automation and air conditioning systems
Model Name/Number984
BrandBeck
Operating Range0 to 100 Pa
Rated Supply Voltage18…30 VDC
WidthApprox. 135 gr
Output Type0 … 10 V

Differential pressure Transmitter From Beck Gmbh 984m series are used for measuring differential pressure, positive pressure and vacuum pressure. These sensor offer 2 pressure ranges which can be alternatively be selected by a jumper for monitoring gases, clean air and non-aggressive media.


Applications:

  • Air conditioning and clean rooms
  • Building automation
  • Environment protection
  • fans and blower control
  • valve and flap control
  • filter and blower monitoring
  • stair pressurization
  • control of air flows
  • Air flow monitoring
  • Air velocity measurement
  • Gas Flow measurement
  • Gas flow metering

 

Specifications:

  • Dual jumper selectable measuring range measuring range: 0-100Pa to 0-250kPa with or without display
  • 4-20mA, 0-10V jumper selectable output square rooted function output
  • IP54, IP65 housing 2, 3 wire connection
  • Eg. 984m.535 0-1kPA/ 0-2.5 kPa
 

Series 616KD-00 Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-2.0% FS
Product Weight1.8 oz (51 g)
Stability+-1% FS/yr
Temperature Limits32 to 122 DegreeF (0 to 50 DegreeC)
Pressure Limits2 psi (13.8 kPa).
Warm Up Time30 min
Current Consumption21 mA max

 

Features:

  • No additional reference pressure sources and separate calibration devices are necessary
  • Back mounting tabs are integral to the molded housing
  • Easy-to-wire open screw terminals at the top of the housing


Dwyer 616KD Series Specifications

ServiceAir and non-combustible, compatible gases
Accuracy±2% FS
Stability±1% FS/year
Temperature Range32 to 122°F (0 to 50°C)
Pressure Range2 psi (13.8 kPa)
Thermal Effect on Span±0.11% FS/°F (±0.19% FS/°C) typ
Thermal Effect on Zero

616KD-X0: 0.6%/°F (1%/°C)

616KD-X1: 0.3%/°F (0.5%/°C)

616KD-X2: 0.2%/°F (0.33%/°C)

616KD-X3: 0.12%/°F (0.2%/°C)

616KD-X4: 0.06%/°F (0.1%/°C) FS max

Power Supply16 to 35 VDC (2 or 3 wire), 20 to 28 VAC (3 wire)
Zero & SpanAdjustments Push button
Loop ResistanceDC: 1000 Ω max
AC: 1200 Ω max
Current Consumption21 mA max
Electrical ConnectionsScrew-type terminal block
Process ConnectionsBarbed, dual size to fit 1/8″ & 3/16″ (3 mm & 5 mm) ID rubber or vinyl tubing
Mounting OrientationPosition insensitive
Weight1.8 oz (51 g)

Series 616KD-01 Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-0.25%
Product Weight1.8 oz (51 g).
Warm Up Time20 min
Current Consumption24 mA
Output Signal4 to 20 mA
Stability+-1% FS/year.


These low-cost, compact transmitters reduce up-front costs as well as expenses over the life of the product. These transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume, and filter monitoring. With the One-Touch digital push button, both zero and span are calibrated simultaneously. Just let the unit sit at zero reference pressure, then push the button. Mounting is simple with integral mounting holes on the molded housing; unit can also be mounted on a 35-mm DIN rail. A protective cap snaps directly on to the housing to cover wiring terminals.

Specifications:

Accuracy±2% full-scale
Min Pressure (in WC)0
Max Pressure (in WC)2
Min Temperature (° F)32
Max Temperature (° F)122
Min Temperature (° C)0
Max Temperature (° C)50
Process Connection1/8″ and 3/16″ hose barbs
Unit Of Measurement” WC
Battery Type16 to 35 VDC
Electrical ConnectionsScrew terminal
Output4 to 20 mA
EnclosureRatingNEMA 1, IP20
HousingPolycarbonate
Media CompatibilityAir and noncombustible, compatible gases
DescriptionDifferential Pressure Transmitter, 4 to 20 mA Output, 2 IN WC

Series 616KD-02 Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-0.25% FS
Product Weight1.8 oz (51 g)
Temperature Limit0 to 140 DegreeF (-17.8 to 60 DegreeC)
Power Requirements4-20 mA
RatingIP 20
Warm Up Time20 min


These low-cost, compact transmitters reduce up-front costs as well as expenses over the life of the product. These transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume, and filter monitoring. With the One-Touch digital push button, both zero and span are calibrated simultaneously. Just let the unit sit at zero reference pressure, then push the button. Mounting is simple with integral mounting holes on the molded housing; unit can also be mounted on a 35-mm DIN rail. A protective cap snaps directly on to the housing to cover wiring terminals.

Specifications:

Accuracy±2% full-scale
Min Pressure (in WC)0
Max Pressure (in WC)2
Min Temperature (° F)32
Max Temperature (° F)122
Min Temperature (° C)0
Max Temperature (° C)50
Process Connection1/8″ and 3/16″ hose barbs
Unit Of Measurement” WC
Battery Type16 to 35 VDC
Electrical ConnectionsScrew terminal
Output4 to 20 mA
EnclosureRatingNEMA 1, IP20
HousingPolycarbonate
Media CompatibilityAir and noncombustible, compatible gases
DescriptionDifferential Pressure Transmitter, 4 to 20 mA Output, 3 IN WC

Series 616KD Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Piece
Product Weight1.8 oz (51 g)
BrandDwyer
Current Consumption21 mA max
Warm Up Time30 min
Loop ResistanceDC: 1000 Q max.; AC: 1200 Q max
Output Signal4 to 20 mA or unit with field selectable 0 to 10 & 0 to 5 volt.
Zero and Span AdjustmentsPush button


The SERIES 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.
Product Applications:

  • Air handlers
  • Duct pressure
  • Variable air volume
  • Filter monitoring

Details:

ModelDescription
616KD-00Differential pressure transmitter, 0 to 1″ w.c., 4-20 mA.
616KD-01Differential pressure transmitter, 0 to 2″ w.c., 4-20 mA.
616KD-02Differential pressure transmitter, 0 to 3″ w.c., 4-20 mA.
616KD-03Differential pressure transmitter, 0 to 5″ w.c., 4-20 mA.
616KD-04Differential pressure transmitter, 0 to 10″ w.c., 4-20 mA.
616KD-05Differential pressure transmitter, 0 to 15″ w.c., 4-20 mA.
616KD-06Differential pressure transmitter, 0 to 20″ w.c., 4-20 mA.
616KD-07Differential pressure transmitter, 0 to 25″ w.c., 4-20 mA.
616KD-10Differential pressure transmitter, 0 to 250 Pa, 4-20 mA.
616KD-11Differential pressure transmitter, 0 to 500 Pa, 4-20 mA.
616KD-12Differential pressure transmitter, 0 to 750 Pa, 4-20 mA.
616KD-13Differential pressure transmitter, 0 to 1250 Pa, 4-20 mA.
616KD-14Differential pressure transmitter, 0 to 2500 Pa, 4-20 mA.
616KD-15Differential pressure transmitter, 0 to 5000 Pa, 4-20 mA.

Sensors Transmitters Kimo Canada wholesale India

Kimo CP 300 Pressure Transmitter

 
 
Model Name/NumberCP 300
BrandKimo
Output Type4-20 mA
Measuring RangeFrom 0/+10 Pa to -10 000/+10 000 Pa.
Simultaneous Display1 to 4 parameters
Resolution0.1 Pa
Power Supply6A/230 Vac


Features:

  • Housing with simplified mounting system
  • Software or DIP switch configuration
  • Quick and easy mounting with the 1/4 turn system with wall-mount plate

KIMO Pressure Transmitter CP 100

 
 

Voltage 0-10 V
Brand Kimo
Protection Type IP65
Response Time 0.3 sec
Output Type 4-20 mA
Housing ABS
Working Temperature From 0 to +50 DegreeC

Measuring ranges:
from -500 to +1000 Pa (CP 101)
from -500 to +1000 mmH2O (CP 102)
from -250 to +500 mbar (CP 103)
from -1000 to +2000 mbar (CP 104)
Unit of measurement:
Pa, mmH2O, mbar, inWG, mmHG (CP 101 and CP 102)
mbar, inWG, mmHG, KPa, PSI (CP 103 and CP 104)

Accuracy:
±1.5% of reading ± 3 Pa (CP 101)
±1.5% of reading ± 3 mmH2O (CP 102)
±1.5% of reading ± 3 mbar (CP 103 and CP 104)

Resolution:
1 Pa 0.1 mmH2O 0.01 mbar 0.01 inWG 0.01 mmHG (CP 101 and CP 102)
1 mbar – 0.1 inWG – 1 mmHG – 0.1 KPa – 0.1 PSI (CP 103 and CP 104)

Kimo Temperature Differential Pressure Transmitter CP 215

 
 
Product Weight320 gm
Protection TypeIP65
BrandKimo
Model Number/NameCP 215
Frequency50-60 hz
Pressure Range-2000/+2000 mbar
HousingABS
Height of DigitsValues : 10 mm ; Units : 5 mm
Minimum Load1 K Ohms (0-5/10 V)


Other Details:

  • Units of measurement: mbar, mmH2O, kPa, inWG, mmHG, hPa, daPa, PSI, °C / °F
  • Device fully protected by double isolation or reinforced isolation
  • Electrical connection: Screw terminal block for cables 2.5 mm2 . Carried out according to the code of good practice
  • PC communication: USB-Mini Din cable
  • Environment: Air and neutral gases
  • Autozero: Manual by push-button
  • Type of fluid: Air and neutral gases
  • Security: Protection class 2 ; Pollution degree 2 ; Overvoltage category 2
  • Configurable intermediate ranges, Trend indicator
  • ¼ turn system mounting with wall-mount plate

Kimo Make CP 110 Pressure Transmitter

 
 
Product Weight164 g
Protection TypeIP65
BrandKimo
MaterialABS
Size50×17 mm
DisplayLCD 10 digit

Measuring ranges:
  • CP 111 : from -100 to +100 Pa with EV
  • CP 112 : from -1000 to +1000 Pa
  • CP 113 : from -10 000 to +10 000 Pa
  • CP 114 : from -500 to +500 mbar
  • CP 115 : from -2000 to +2000 mbar

Technical data:
  • ABS housing – IP 65
  • With or without 10-digits LCD display
  • 0-10 V or 4-20 mA output
  • Housing with simplified mounting system
  • Software or DIP switch configuration
  • Quick and easy mounting with the 1/4 turn system with wall-mount plate
  • Options:
  • CP11X followed by: A or P then O or N
  • A – Active 0-10 V or 4-20 mA
  • P – Passive 4-20 mA
  • Display (Yes – O/No – N)

Please note that The CP111 is only available in active.
 

Kimo Make Differential Pressure Transmitter

 
 
Model Name/NumberCP 110
Protection TypeIP 65
Output Type0-10 V or 4-20 mA
BrandKimo
MaterialABS
Display10-digits LCD

Kimo Make Differential Pressure Transmitter

Product Description:
Measuring ranges
CP 111 : from -100 to +100 Pa with EV
CP 112 : from -1000 to +1000 Pa
CP 113 : from -10 000 to +10 000 Pa
CP 114 : from -500 to +500 mbar
CP 115 : from -2000 to +2000 mbar
Technical data
ABS housing – IP 65
With or without 10-digits LCD display
0-10 V or 4-20 mA output
Housing with simplified mounting system
Software or DIP switch configuration
Quick and easy mounting with the 1/4 turn system with wall-mount plate
 

Kimo Differential Pressure Transmitter- CP 113

 
 
Model Name/NumberCTV 110
Product Weight164 g
Protection TypeIP65
BrandKimo
MaterialABS
Size50×17 mm

Product Specification:-
  • Accuracy Range Percent : ±1.5% of reading ±3 mmH2O
  • Brand Name : Kimo
  • Display Text : 10 digits
  • Display Type : LCD
  • Includes : KIAL-100A : Power supply class 2, 230 Vac input, 24 Vac output, KIAL-100C : Power supply class 2, 230 Vac input, 24 Vdc output, LCC-S : configuration software with USB cable, Connection tube, Connection fittings, Through-connections
  • Item Weight G : 143
  • Material Type : ABS V0 as per UL94
  • Model Text : CP 113
  • Power Consumption Va : 2 or 0.6
  • Product Information : Height of digits : Value : 10 mm ; Unit : 5 mm
  • Cable gland : for cables Ø 8 mm maximum
  • Conditions of use (°C/%RH/m) From 0 to +50 degreeC. In non-condensing condition. From 0 to 2000 m
  • Output / Supply: active sensor 0-10 V or 4-20 mA (alim. 24 Vac/Vdc ± 10%), 3-4 wires, passive loop 4-20 mA (power supply 16/30 Vdc), 2 wires, common mode voltage <30 VAC, maximum load : 500 Ohms (4-20 mA) / minimum load : 1 K Ohms (0-10 V)
  • Please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
  • Protection : IP65
  • Resolution : 1 Pa ; 0.1 mmH2O ; 0.01 mbar ; 0.01 inWG ; 0.01 mmHG ; 0.1 daPa ; 0.001 kPa
  • Standards : European directives: 2004/108/EC EMC ; 2006/95/EC Low Voltage ; 2011/65/EU RoHS II ; 2012/19/EU WEEE
  • Storage Temperature Celsius : -10 to +70
  • Tsin : T009190533
  • Warranty : No Warranty
 

Kimo Make Differential Pressure Transmitter CO110

 
 
Model Name/NumberCO110
BrandKimo
Protection TypeIP65
Output Type0-10 V
HousingABS
Passive Loop Output4-20 mA
Power Supply24 Vac/Vdc
Range0 to 5000 ppm

CO transmitter type CO110:
• Range from 0 to 500 ppm
• 0-10 V active output, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing, IP65 (depending on model),
with or without display
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system

 

Kimo Make Differential Pressure Transmitter CO112

 
 
Operating Range0 to 5000 ppm
Protection TypeIP65
Output Type0-10 V
BrandKimo
Model Number/NameCO112
Power Supply24 Vac/Vdc
Passive Loop Output4-20 mA
HousingABS

CO2 transmitter type CO112:
• Range from 0 to 5000 ppm
• 0-10 V output, active, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing, IP65 (depending on model),
with or without display
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system

 

Kimo Make Differential Pressure Transmitter CP116

 
 
Model Name/NumberCP116
Product Weight143 g
Protection TypeIP65
BrandKimo
MaterialABS V0 as per UL94
DisplayLCD 10 digits
Size50 x 17 mm
Height of DigitsValue : 10 mm ; Unit : 5 mm
ConnectionsRibbed, 6.2 mm
Cable GlandFor cables 8 mm maximum

Atmospheric pressure transmitter type CP116:
• Measuring range from 800 to 1100 hPa
• Indication of the pressure in mbar, mmHG ou hPa
• 0-10 V or 4-20 mA output, active, power supply
24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive
loop, power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing, IP65, with or without display 
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

Kimo Make Differential Pressure Transmitter CTV110

 
 
BrandKimo
Model No.CTV110
Protection TypeIP65
MaterialABS V0 as per UL94
DisplayLCD 10 digits
Size50 x 17 mm
Weight164 g

Temperature and air velocity transmitter type CTV110:
• Measuring range from 0 to 30 m/s and from 0 to 50 °C
• 0-10 V or 4-20 mA output, active, power supply
24 Vac/Vdc (3-4 wires)
• ABS V0 housing, IP65, with or without display
• Alternating display of air velocity and temperature
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

Kimo Make Differential Pressure Transmitter HM110

 
 
Protection TypeIP65
Output Type0-10 V
BrandKimo
HousingABS
Passive Loop Output4-20 mA
Power Supply24 Vac/Vdc
Measuring Range5 to 95%RH

Humidity transmitter type HM110:
• Measuring range from 5 to 95%RH
• 0-10 V output, active, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing IP65 (duct or remote model)
or IP20 (ambient model), with or without display
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

Kimo Make Differential Pressure Transmitter TM110

 
 
BrandKimo
Product Weight162 g
Protection TypeIP65
Model Number/NameTM110
MaterialABS V0 as per UL94
DisplayLCD 10 digits.
Size50 x 17 mm
Height of DigitsValues : 10 mm ; Units : 5 mm
For Cables8 mm maximum
Length2 m

Temperature transmitter type TM110:
• Range from 0 to 50 °C (ambient model), from
-20 to +80 °C (duct model) and from -100 to 400 °C
(model with Pt100 or NTC terminal block)
• 0-10 V output, active, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing, IP65 (remote and duct models) or
IP20 (ambient model), with or without display
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

Kimo Make Differential Pressure Transmitter TH110

 
 
Product Weight124 g (ambient model) ; 135 g (duct and remote models)
BrandKimo
Model Number/NameTH110
MaterialABS V0 as per UL94
ProtectionIP65 (duct and remote models)
DisplayLCD 10 digits. Size : 50 x 17 mm
Height of DigitsValues : 10 mm, Units : 5 mm

Humidity and temperature transmitter type TH100:

• Measuring range from 5 to 95%RH and from
0 to 50 °C (ambient model) or from -20 to +80 °C
(duct or remote model)
• 0-10 V output, active, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing IP65 (duct or remote model)
or IP20 (ambient model), with or without display
• Alternating display of humidity and temperature.
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

Scalable Differential Pressure Transmitter

 
 
BrandKimo
Model Number/NameCP100
Product Weight145 g
Protection TypeIP 65
Cable GripCable 7 mm
Height of The Digits10 mm
Display5-digit LCD
Dimension50 x 15 mm
HousingABS

Scalable Differential Pressure Transmitter:
  • Differential pressure transmitter type CP 100

  • Measuring ranges from 0/+100 Pa to -1000/+2000 mbar (according to model, see “Configuration”)

  • Configurable intermediary and central zero ranges

  • 0-10 V or 4-20 mA output, active sensor, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply 18 to 30 Vdc (2 wires)

  • ABS IP 65 housing, with or without display

  • Quick and easy mounting with the “¼ turn” system with wall-mount plate

 

Kimo Make Differential Pressure Transmitter CR110

 
 
BrandKimo
Model Number/NameCR110
Range0 to 1500 W/m2
Active Output0-10 V
Power Supply24 Vac/Vdc
Passive Loop Output4-20 mA
HousingABS

Solar radiation transmitter type CR110.
• Range from 0 to 1500 W/m²
• 0-10 V active output, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 housing, with or without display
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

Kimo Make Differential Pressure Transmitter LR110

 
 
Product Weight140 g
Protection TypeIP 65
BrandKimo
Model Number/NameLR110
MaterialABS V0 as per UL94
DisplayLCD 10 digits
Size50 x 17 mm
Height of DigitsValues : 10 mm ; Units : 5 mm
Remote ProbeCable of 2 m length in PVC

Light transmitter type LR110:

• Range from 0 to 10000 lux
• 0-10 V active output, power supply 24 Vac/Vdc
(3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
• ABS V0 IP65 housing, with or without display
• “¼ turn” system mounting with wall-mount plate
• Housing with simplified mounting system
 

KIMO Temperature Transmitter

 
 
Usage/ApplicationAir and Neutral gases
Model Name/NumberCP 111 – CP 112 – CP 113
BrandKIMO
Voltage24 Vac/Vdc
Accuracy+-1% of reading +-2 Pa
Warranty1 year
Temperature Range-20 to +80 Deg C

Other Details:
  • Housing with simplified mounting system
  • Software or DIP switch configuration
  • Quick and easy mounting with the 1/4 turn system with wall-mount plate
 

CTV 310 Air Velocity / Air Flow Transmitter

 
 
Accuracy+-0.5%
Resolution0.01 m/s
Ambient Temperature0-50degC
Ranges0-1 m/s to 0-30 m/s
Operating TemperatureFrom 0 to +50degC
Weight170 gm

Air Velocity / Air Flow Transmitter CTV 310:
• Ranges from 0-1 m/s to 0-30 m/s (configurable) and 0-50 °C
• Optionnal STV-OMNI : range from 0.00 to 5 m/s with resolution of 0.01 m/s
• Interchangeable measurement probe
• Configurable intermediate ranges
• Airflow function
• Simultaneous display of 4 parameters
• 2 outputs 4-20 mA or 0-10V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
• 2 visual (dual color LED) and audible (buzzer) alarms
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS IP 65 housing, with or without 2-line backlit display
• Quick and easy mounting using the “1/4 turn” system with wall-mounting plate.
 

Dwyer Magnehelic Gauge Wholesale Suppliers India

TRI2 Tridicator Gage

 
 
Diameter4-3/4″
Weight1 lb. 2 oz.
FinishedBaked dark gray enamel
Pressure Rating15 psi
Thread Pipe1/8″ NPT
Deep Size2-3/16″

The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank.
 

Series WDG Weatherproof Digital Pressure Gage

 
 
Display Type4-digit LCD (1-1/4 x 5/8″).
Power3 V CR123A
Size2.5″ O.D
Battery Life2 to 3 years typ.
Housing MaterialBDG: ABS plastic; WDG: Fiberglass reinforced PP plastic
Thermal Effect+-0.04% FS per degC.

The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.
 

Dwyer Series 2000:2060 Magnehelic Differential Pressure Gage

 
 
AccuracyPlus or minus 2%
Weight1 lb. 2 oz
Dimension4-3/4″ dia. x 2-3/16″ deep
Pressure Rating15 PSI (0,35 bar)
Connections1/8″ NPT
Ambient Temperature Range20deg to 140degF


Dwyer Instruments – Series 2000: 2060 Magnehelic Differential Pressure Gage

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

Select the Magnehelic gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Specifications
Service: Air and non-combustible, compatible gases (Natural Gas option available).
Wetted Materials: Call us at (888) 886-8185.
Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: ±2% of full scale throughout range at 70°F (21.1°C).
Pressure Range: 0-60.0″ w.c.
Pressure Limits: -20″ Hg. to 15 psig. (-0.677 bar to 1.034 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits: 20 to 140°F (-6.67 to 60°C).
Mounting Orientation: Diaphragm in vertical position.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Weight: 1 lb 2 oz (510 g).
Standard Accessories: Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread to rubber tubing adapters and three flush mounting adapters with screws.
Below are other pressure ranges available for Series 2000 Differential Pressure Gage:

Model
Number
Range
Inches
of Water
Model
Number
Range
Inches
of Water
2000-00N†••-.05-0-.220150-15
2000-00†••0-.2520200-20
2000-0†•0-.5020250-25
20010-1.020300-30
20020-2.020400-40
20030-3.020500-50
20040-4.020600-60
20050-5.020800-80
20060-6.021000-100
20080-8.021500-150
20100-10 
† These ranges calibrated for vertical scale position.
• Accuracy +/-3% •• Accuracy +/-4%

Dm-1000 Digi Mag Digital Differential Pressure And Flow Gages

 
 
Display Type4-digit LCD (digits: 0.60H x 0.33W).
Accuracy+-1% FS including linearity, hysteresis and repeatability; +-2% FS for ranges 1 in w.c. and below.
Weight1.18 lb (535 g).
Housing MaterialsGlass filled plastic.
Long Term Stability+-1% FS per year.
Power Supply9-24 VDC.


The DigiMag® SERIES DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Product Applications

  • Filter monitoring
  • Air velocity or flow
  • Blower vacuum monitoring
  • Fan pressure indication
  • Duct, room or building pressures
  • Clean room positive pressure indication



Models & Ordering

ModelDescription
DM-1102DigiMag® differential digital pressure gage, range 0-0.25″ w.c.
DM-1103DigiMag® differential digital pressure gage, range 0-0.5″ w.c.
DM-1104DigiMag® differential digital pressure gage, range 0-1″ w.c.
DM-1105DigiMag® differential digital pressure gage, range 0-2″ w.c.
DM-1107DigiMag® differential digital pressure gage, range 0-5″ w.c.
DM-1108DigiMag® differential digital pressure gage, range 0-10″ w.c.
DM-1109DigiMag® differential digital pressure gage, range 0-15″ w.c.
DM-1110DigiMag® differential digital pressure gage, range 0-25″ w.c.
DM-1111DigiMag® differential digital pressure gage, range 0-50″ w.c.
DM-1112DigiMag® differential digital pressure gage, range 0-100″ w.c.
DM-1122DigiMag® differential digital pressure gage, range 0.25-0-0.25″ w.c.
DM-1123DigiMag® differential digital pressure gage, range 0.5-0-0.5″ w.c.
DM-1124DigiMag® differential digital pressure gage, range 1-0-1″ w.c.
DM-1125DigiMag® differential digital pressure gage, range 2-0-2″ w.c.
DM-1127DigiMag® differential digital pressure gage, range 5-0-5″ w.c.
DM-1128DigiMag® differential digital pressure gage, range 10-0-10″ w.c.

Industrial Magnehelic Differential Pressure Gauges

 
 
Accuracy+-2%
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits20 to 140degF* (-6.67 to 60degC).
Pressure Limits-20 in hg

 

We are the leading manufacturer and exporter of a quality tested assortment of Industrial Magnehelic Gauges. Our range is widely used in checking the automatic valves and gas-air ratio controls, further in medical equipment also to monitor blood and respiratory pressures. Besides it is used to measure the fan and blow pressures, liquid levels and pressures in fluidic systems. Operated by a diaphragm our product is low in cost and is available in different specifications ranging from 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , and 0- 60 pA, 0-250 pA.

 

Uses:

  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely

Sensocon Magnehelic Gages -50 To 50 MMWC

 
 
Weight1 lb 2 oz 510 g
Media CompatibilityAir and compatible gasses
Warranty2 year
Accuracy+/-2%
Pressure Limit-20″ hg
Process Connection1/8″

Specification:
  • Dial size : 4′
  • Range -50 To 50 MMWC
  • Range – 0 – 6 MM WC
  • Range – 0 – 25 MM WC
  • Range – 0 – 50 MM WC
  • Range – 0 – 100 MM WC
  • Range – 0 – 60 PAC
 

Magnehelic Gauge

 
 
Diameter4-3/4″
Weight1 lb. 2 oz.
Deep2-3/16″
FinishedBaked dark gray enamel
Thread Size1/8″ NPT plugs
Pressure Rating15 PSI

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

  • Accuracy

  • High functionality

  • Long service life

 

Specifications:

  • We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge

  • Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%

  • Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others

  • We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas

  • In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover

  • These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

 

Technical Specifications:

  • Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)

  • Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option

  • HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)

  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only

  • Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)

  • Size: 4 (101.6 mm) Diameter dial face

  • Mounting Orientation: Diaphragm in vertical position, Consult factory for

  • Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back

  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)

  • Other position orientations

 

Applications:

  • Filter Status

  • Duct Static Pressure

  • Clean Room Pressure

  • Building Pressure

  • Fan and Blower Pressure

  • Paint Booths

  • Dust Collectors

  • Glove Box Pressure

  • Bubbler Systems

  • Cabinet Purging

 

Dwyer Digital Differential Pressure Gauge

 
 
Display Type4-digit LCD
ShapeRound
Accuracy2%
Size2.5″(63mm)
Thread Connection1/4G
Battery Power9 V
Dial MaterialAluminum


Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Digital Differential Pressure Gauges

 
 
Accuracy+-1% F.S
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face.
Display4-digit LCD
Temperature Limits0 to 140 DegreeF (-18 to 60 DegreeC).
Housing MaterialsGlass filled plastic


The series A1 Digital Differential Pressure Gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 differential pressure gauges utilize an extremely stable piezo resistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½” LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compare to mechanical gauges for a similar price.

Maximum Pressure:

  • 4″ w.c. and less = 2 PSI; 5″ w.c. and above = 10 PSI
  • Media compatibility:
  • Air and compatible non combustible, non corrosive gasses
  • Accuracy*:
  • Axxx0-xx – 1.00%; Axxx1-xx – 0.50%; Axxx2-xx – 0.25%
  • Temperature Ranges: Compensated and Operating:
  • -10° to 140°F (-23° to 60°C)
  • Thermal Effect*:
  • /- 0.012% FS/°F
  • Output Signal:
  • 4-20 mA (option)
  • Loop Resistance:
  • 750 Ω Max (for internally sourced power); 1800 Ω Max
  • (for externally sourced power of 36 VDC)


Specifications:

  • Universal 24-240 VAC or VDC
  • Housing Material:
  • Glass Filled Nylon
  • Enclosure Rating:
  • Designed to meet NEMA 4X face; with optional
  • cover the entire product is weatherproof

Differential Pressure Piston-Type Gage

 
 
BrandDWYER
Accuracy+-3-2-3%
Weight2.5″ = 0.60 lb (0.27 kg)
Size2.5″ (63 mm) 4.5″ (115 mm).
Material GradeSS316
Temperature Limits-40 to 200 DegreeF (-40 to 93 DegreeC).
Pressure Limits6000 psig

Differential Pressure Piston-Type Gage

Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4″ female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.
Product Applications
Filter pressure drop
Strainers
Pump performance testing
Heat exchanger pressure drop
<
 

Series PTGD Differential Pressure Piston-Type Gage

 
 
Accuracy+-3-2-3%
Weight2.5″ = 0.60 lb (0.27 kg)
Size2.5″ (63 mm) 4.5″ (115 mm).
Process Connections1/4″ female NPT end connections standard; 1/4″ female NPT back connections optional.
Mounting OrientationMount in any position.
Temperature Limits-40 to 200 DegreeF (-40 to 93 DegreeC).

The SERIES PTGD Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4″ female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.

Applications:
  • Filter pressure drop
  • Strainers
  • Pump performance testing
  • Heat exchanger
  • pressure drop
 

Photohelic Switch and Gauges

 

 
BrandDWYER
Measuring Range0-.50″ w.c.
Model Name/NumberSeries A3000
Usage/ApplicationIndustrial
MaterialAluminium
ColorBlack
Scale Range4″ (101.6 mm) dial face,5″ (127 mm) O.D. x 8-1/4″ (209.55 mm).

Magnehelic Gauge Sensor

 
 
BrandETI
Pack TypeBox
MaterialSS
FinishPolished
Size1-3/4″

Admired as first among the best, we provide clients with the premium quality of Magnehelic Gauge Sensor. The gauge sensor is used for air velocity monitoring applications and is manufactured by using latest technology. By following total quality management, the quality of Magnehelic gauge sensor is never compromised.

Features:
  • Excellent air velocity monitoring efficiency
  • Compact design
  • Easy to operate and maintain
 

Differential Pressure Gauge Nozzles

 
 
BrandETI
Usage/ApplicationHome Gardening
MaterialSteel
Size1/2″-3/4″
Packaging TypeBox

We are offering Differential Pressure Gauge Nozzles to our client.

Features:

  • Excellent air velocity monitoring efficiency
  • Compact design
  • Easy to operate and maintain
 

Magnehelic Gauge Nozzles

 
 
Usage/ApplicationHome Gardening
MaterialSteel
BrandETI
Size1/2″-3/6″
Packaging TypeBox

We are offering Magnehelic Gauge Nozzles to our client.

Features:

  • Excellent air velocity monitoring efficiency
  • Compact design
  • Easy to operate and maintain
 

Series UGJ Utility Gage

 
 
Accuracy+/- 2% F.S. at 21.1 DegreeC
Usage/ApplicationIndustrial
BrandDWYER
Weight1 lb. 2oz (510g)
Pressure60 Pa
Ambient Temperature7-60degC
ColorBlack
Connectiion1/8”NPT

The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi.
 

Dwyer Make Magnehelic Differential Pressure Gauge

 
 
AccuracyPlus or minus 2%
Diameter4-3/4″
Weight1 lb. 2 oz.
Deep2-3/16″
Connections1/8″ NPT
Pressure Rating15 psi

Our specialization lies in offering a commendable range of Dwyer Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices.

Features:
  • Compact size
  • Accuracy
  • Easy installation

Application:
  • Industrial Structure: Spring Pressure Gauge Connection Type: Radial Direction
  • Function: Local Indication Type Indicating  
  • Pressure Reference: Differential Pressure Gauge
 

Magnehelic Differential Pressure Gauge

 
 
BrandDWYER
Usage/ApplicationIndustrial
Accuracy+-2%
Weight1 lb 2 oz (510 g)
Size4 (101.6 mm)
Pressure Limits-20 Hg
HP Option35 psig

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas. In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover. These have exterior finish with grey color to withstand 168 hour salt spray corrosion test.


Specifications :

  • Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
  • Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option:
  • HP option: 35 psig (2.41 bar), 80 psig (5.52 bar).
  • Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only.
  • Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
  • Size: 4 (101.6 mm) Diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position, Consult factory for
  • Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
  • Other position orientations.
 

Dwyer Digital Differential Pressure Gauge

 
 
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face.
Process Connections1/8″ (3 mm) I.D. tubing.
Current Consumption5 mA maximum.
Type of Battery9V
Display4-digit LCD (Digits: 0.60″ H x 0.33″ W).

Experience of this domain, we provide clients with the premium quality of Dwyer Digital Differential Pressure Gauge. For regulation and monitoring of pressure of different industrial applications, the offered Dwyer digital differential pressure gauge is used. Simple calibration and thermal stability make the pressure gauge highly demanded.

Features:
  • Simplifies calibration with its digital push button
  • Four button operation reduces set up time
  • Easy to use and maintain
 

Dial Gages

 
 
Size4″ (101.6 mm)
Accuracy+-2%
Pressure Limit-20 in hg
Temperature Limit20 to 140degF
Process Connection1/8″
Weight510 g

Backed by years of experience of this domain, we present clients with the premium quality of Dial Gages. Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors. 

Features:
  • Excellent measurement accuracy
  • Easy to use
  • Requires less maintenance
 

Dwyer Air Velocity Sensors

 
 
BrandETI
Weight G5-20 gm
Pack TypeBox
MaterialSS
UsageCommercial


As a patron centric organization, we provide clients with the premium quality of Dwyer Air Velocity Sensors. Used for monitoring the air velocity of different industrial applications, the air velocity sensors are manufactured by using latest technology. Compact design, sturdy construction and high functionality, make the Dwyer air velocity sensors highly demanded.

Features:

  • Ideal for air velocity monitoring applications
  • Compact design
  • Easy operations and calibrations

Series UGI Utility Gage

 
 
ShapeRound
Accuracy2.5%
Packaging TypeBox
Battery IncludedNo
Gauge Connection1/8NPT
Gauge Dial Size21.5″(40mm)

1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales. The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators.