Cooling and Condenser Coil Manufacture From Delhi

Cooling Coil

Usage	Industrial Use
Brand	ETI
Voltage	220 V
Liquid Flow Rate	4.12-15.2 L/s
Plate Thickness	20 SWG
Tube Diameter (Inch)	3/8,1/2,5/8 inch
Maximum Working Pressure	4.0 Mpa

Our organization is instrumental in offering a wide range of Cooling Coil to our clients. The coil offered by us is manufactured in compliance with international quality parameters using best quality raw material and advance technology. It is widely appreciated among our clients due to its remarkable features. Apart from this, offered coil is available in varied specifications according to the requirements of the customers.

Features:

Sturdiness
Dimensionally accurate
Corrosion resistance

Coils:

They are manufactured from annealed & seamless copper tubes

Fins:

Aluminium used for fins are super slit fins. Copper tubes are hydraulically/echanically expanded within fin collars to from permanent bond between fin & tube

Header:

M. S. Seamless pipe or copper pipe of heavy gauge

Casing

End covers, top & bottom channels are manufactured of 16 gauge of g. I sheets for protection & long life
Venting & draining system: the coils require only one drain & one vent
The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

Testing:

All coils are tested at 300 psig pneumatic pressures under water for leakage test.

Size:

Chilled water cooling coil : 4/6/8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row

Our range includes:

Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant
Sourced from reliable vendors, we use good quality of 1/2″ copper tube in the production of our gamut
This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray
Electronic Coils. Industrial Coils
Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost
We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils
We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tonne ice capacity per day
Procured from genuine vendors, we use good quality of raw material in the production of our gamut
The raw material includes 1 1/2′ C class and ISI duty ERW tubes
These are heavy duty receivers which are fabricated with the MS plate and have good molding Furthermore, it is manufactured in accordance with international standards and is delivered within specified time frame.

Heating Ventilation Air Conditioning Coil

Usage/Application	Decorations, Heat Sink, Transportation Tools, Door & Window, Glass Wall
Brand	Enviro Tech Industrial Products
Surface Treatment	Mill Finish
Air volume	170m3/h~12600m3/h
Heat	2700W~18900W
Operating Voltage	230 VAC

In order to meet huge market demands, we are involved in presenting huge array of Heating Ventilation Air Conditioning Coil. These Chilled Water Coils are highly appreciated amongst our clients due to their various uses in suitable applications such as for a single purpose such as heating and cooling. Moreover, the offered products are highly durable in nature. We are leading Heating Ventilation Air Conditioning Coil manufacturer in DELHI.

Features:

Superlative performance
Competitive prices
Best grade materials

Thermal Oil Coil

Usage/Application	Ahu
Size	48” X 60”
Material	Stainless Steel
Brand	Enviro Tech Industrial Products
Surface Treatment	Polished
Technique	ERW

We hold the proficiency to offer a variety of Oil Thermal Coil that are extensively used in downstream of boiler bank to preheat the feed water. These products are always water tube type that has different types of tubes for different applications. Our industrious professionals precisely engineer these products as per the necessities of the clients adhering to strict quality standard.

Evaporator Coil

Application	Induction Heater, Water Heater, Boiler, Automobile
Voltage	380 V
Maximum Working Pressure	25 bar
Ref.Capacity	81544 W
Fan Dia	550 mm
Cooling Area	265 m2

We are introducing our extremely effectual range of Evaporator Coil that are made from quality mild steel that provides an outstanding durability to the product. These Evaporator Coils are offered to our customers as per the drawings provided by them. With our voluminous knowledge in the manufacturing of these Evaporator Coils, we take special care of their quality.

Salient Features:

Tube Bundle Construction
Bundle types – tube bundle or tank heaters, duty fluid, steam or tank heater
Tube pitch – inline or equilateral

Dx Cooling Coil

Usage/Application	Industrial
Voltage	330 V
Liquid Flow Rate	4.12-15.2 L/s
Maximum Working Pressure	4.0 Mpa
Maximum Operating Pressure	250 psi
Maximum Fluid Temperature	150degF

We are one of the most leading manufacturer & supplier of Dx Cooling Coil. These coils are easily available at market leading prices. It is manufactured under the strict supervision of the experts. Known for their durability and fine finish, it is widely applauded among our clientele.

Chilled Water Coil

Material	Copper
Voltage	220-380 V
Structural Form	Vertical
Condensation Forms	Air-Cooled
Liquid Flow Rate	0.1~10 M/s
Maximum Working	4.5 MPa

We are one of the prominent manufacturers of best quality coils. Our Chilled Water Coils are highly required for their good productivity. We providing top quality of chilled water coil and glycol coils made from high grade materials soured from authorized and reliable vendors in the industry. We make available these chilled water coil and glycol coils with horizontal vertical tubes. We provide our clients different sizes of these coils which are easy to install and use. Our chilled water coil and glycol coils are highly demanded for its excellent quality and durability.

Features:

Cost efficient
Reliable
Easily manageable
Long lasting.

Industrial Cooling Coils

Usage	Industrial Use
Brand	Enviro Tech Industrial Products
Fin Material	Aluminium
Tube Size	8 mm OD to 50 mm OD
Rows	Single to twelve rows
FPI	3 FPI to 12 FPI

We are a prominent entity engaged in offering the best Industrial Cooling Coil. Our procuring agents ensure that the raw material is sourced from the distinguished vendors of the markets. All our products have been able to cater to the demands of the clients owing to their attributes such as low maintenance and high durability. Precisely designed by our experienced work force using hi-tech technical machinery, these products are in compliance with the stringent parameters of the industry.

Features:

Low maintenance
Easy to install
Compact design
Less power consumption
High performance

HVAC Coil

Technique	Cold Rolled
Aluminum Foil	Hydrophilic / Bare
Copper Tube	Smooth Tube / Inner Grooved Tube
Cooling Method	Direct Cooling
Tolerance	+-1%
Fin Space	1.2 mm

In order to meet huge market demands, we are involved in presenting huge array of HVAC Coil. These Chilled Water Coils are highly appreciated amongst our clients due to their various uses in suitable applications such as for a single purpose such as heating and cooling. Moreover, the offered products are highly durable in nature.We are leading HVAC Coil manufacturer in DELHI.

Features:

Superlative performance
Competitive prices
Best grade materials

Anti Corrosive Cooling Coils

Material	Copper
Liquid Flow Rate	3~10 M3/s
Maximum Working Pressure	3 MPa
Condensation Forms	Air-Cooled
Refrigerant	Steam
Structural Form	Vertical
Heat Transfer Mode	Regenerative

We have further developed Anti Corrosive Cooling Coils which enhance our products durability and functionality. Our Anti Corrosive Cooling Coils work in industrial zones where there are lot of harmful chemical in the atmosphere.

Expansion Coils

Tube Material	Copper
Usage/Application	Industrial
Fin Material	Aluminium
Surface Treatment	Polished
Technique	Hot Rolled, Cold Rolled, etc
Steel Grade	430

We supply Direct Expansion Coil which is primarily used for the cooling and heating purpose. This coil is from 1.0 to 2.5 tons with the DX chilled water. These units are appropriate for the floor standing and ceiling suspended. Procured from genuine vendors, we use good quality of raw material in the production of our gamut. The raw material includes copper tubing, sine wave aluminum fins and has vent valve for the removal of air. For the full comfort level, the motors for the blowers have 3 speeds and the casing is fabricated with G.I sheet and powder coated. Moreover, it can be easily customized in compliance with client necessity and is delivered on time.

Double Circuit Cooling Coils

Usage/Application	Ahu
Coil Type	Copper pipe
Fin Material	Aluminium
Voltage	220 V
Tube Diameter	7 mm
Tube Thickness	0.25 mm~1.0 mm

We offer Double Circuit Fin and Tube Type Cooling Coils, used widely in heavy industries including marine motor vessels. These are designed to offer the optimum level of heating and cooling levels desired. Further, our range of cooling coils are designed to maximize heat transfer, within the constraints of air pressure drop across the cooling coil.

Air Conditioner Coils

Usage/Application	Air Condition or Refrigerator
Voltage	220-380 V
Brand	Enviro Tech Industrial Products
Tube Diameter	7.94 mm, 9.52 mm and 12.7 mm
Liquid Flow Rate	2.5 m/s
Width	90 mm

Keeping in the mind the requirements of customers, we are involved in offering best quality of Air Conditioner Coils. The Air Conditioner Coils are frequently used with furnaces in the up flow or down flow position. Further, we ensure to satisfy the entire requirements of customers at market leading prices.

Features:

As per the industry standards
Corrosion resistant

A.H.U Cooling Coils

Material	Aluminium
Frequency	50 Hz
Fin Material	Copper
Voltage	220 V
Weight	5-500 kg
Maximum Working Pressure	4.5 Mpa

We offer advanced range of A.H.U Cooling Coils for air Handling Units That Ensures Excellent Heat Transfer Capability with low Air Side Pressure Drop. These A.H.U Cooling Coils Can be Made Available From us at industry Leading Prices.

Aluminum Finned Copper Coil

Minimum Order Quantity	50 Piece
Material	Copper
Usage/Application	Air Handling Unit
Size	610 MM X 610 MM
Brand	ETIP
Pipe Material	COPPER
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Tube Diameter	1/2 INCH
Max Operating Pressure	360 psi
Max Operating Temperature	350 deg F
Casing	18 gauge galvanized steel
Coil Tube	3/8″ seamless copper tubing
Coil Area	14×14 inches

Aluminum Finned Copper Coil

Applications:

Finned Coil Water to Air Heat Exchangers Can Be Used for Many Heating And Cooling Applications In Both Existing And Retrofit Residential And Light Commercial Construction, Including:
Forced Air Heating: Indoor/Outdoor Furnaces, Boilers, Stoves
Chilled Water Cooling
Dehumidification
Liquid to air and air to liquid heat transfer in light industrial and commercial applications, etc.

Technical Specifications:

Quantity: 1

14×14 Finned Coil Water to Air Heat Exchanger

Applications:

Finned Coil Water to Air Heat Exchangers Can be Used For Many Heating And Cooling Applications In Both Existing And Retrofit Residential And Light Commercial Construction, Including:
Forced Air Heating: Indoor/Outdoor Furnaces, Boilers, Stoves
Chilled Water Cooling

Dehumidification

Liquid To Air And Air to liquid heat transfer in light industrial and commercial applications, etc.

Technical Specifications:

Water to Air Heat Exchanger Dimensions And Technical

Specifications (pdf)

Coil Area: 14×14 Inches
Manifold Inlet & Outlet Connections: 1″ Copper Sweat (1-1/8″ O.D.)
Coil Tube: 3/8″ Seamless Copper Tubing
Casing: 18 Gauge Galvanized Steel
Fins: 12 Fins Per Inch, Aluminum
Max Operating Temperature: 350 deg F
Max Operating Pressure: 360 psi

Condenser Coil

Usage/Application	Ahu
Weight	2.1 kg
Voltage	320 V
Tube Diameter	7mm,7.94mm ,8mm,9.52mm 12.7mm,16mm
Fin Space	1.3-5.3mm

Our range of Condenser Coil is manufactured using a high quality of raw materials which have been bought from reliable vendors and they are supplied and exported to the clients located across the globe. These coils are used for a range of applications in different products and they offer a high performance to the customers. These products have been priced at very reasonable rates and they offer a long lasting service life to the customers in the market.

Features:

Effective
High performance
Cost effective

Specifications:

CONDENSER COIL
Model No	STANDARD SIZE	COPPER PIPE SIZE
ETIP	18′ X 16′ X 4 ROW	3/8′
ETIP	14′ X 14′ X 4 ROW	3/8′
ETIP	13′ X 12′ X 4 ROW	3/8′
ETIP	13′ X 12′ X 3 ROW	3/8′
ETIP	10′ X 12′ X 3 ROW	3/8′

CONDENSER COIL
Model No	STANDARD SIZE	COPPER PIPE SIZE
ETIP	10′ X 11′ X 3 ROW	3/8′
ETIP	10′ X 11′ X 2 ROW	3/8′
ETIP	10′ X 11′ X 2 ROW	3/8′
ETIP	9′ X 9′ X 2 ROW	3/8′

Low Temperature Coils

Usage/Application	Ahu
Cooler Type	GI Sheet
Material	Copper Pipe
Brand	ETI
Fin Material	Aluminium

We are engaged in offering best quality of Low Temperature Coils, which are highly appreciated for their premium quality. These Low Temperature Coils are manufactured using high grade material and tested for their quality assurance. Further, the offered Low Temperature Coils are frequently used in various applications.

Features:

Accurate results
High tensile strength
Excellent performance

Booster Coil

Usage/Application	Ahu
Size	915×610 mm
Brand	ETI
Tube Length	3 1/8″
Flat Side Plates	9 1/8″ Casing Height)

We offer Booster Coil, which are highly appreciated, among our valued clients for its simple configuration and abrasion resistant features. These are widely used in varied industrial applications and are offered in diverse specifications, which match the complete casing of original unit.

Automobiles Air Conditioner Coil

Usage/Application	Automobiles
Tube Size	5/8″, 1/2″ ,5/8″, 20, 1″ OD
Fin Space	5-20 mm
Operating Voltage	115 VAC
Mounting	Wall / Window Mount

Our customers can avail from us inclusive range of Automobiles Air Conditioner Coil that finds widespread application in factory industry. Under the supervision of our specialist professionals, the range is manufactured using premium quality raw material and advanced machines. Our professionals also support us in customizing the robust and highly functional variety as per the exact requirements of the customers.

Direct Expansion Coils

Minimum Order Quantity	12 Number
Usage/Application	Industrial
Voltage	220-380 V
Liquid Flow Rate	0.2-1.0m/s
Brand	Enviro Tech Industrial Products
Maximum Working	15 bar

We are instrumental in offering a qualitative range of Direct Expansion Coils. The entire range is manufactured in compliance with the industrial norms and standards. Our expansion coils are offered by us in varied dimensions to meet the customers’ needs.

Features:

Water proof
High durability
Corrosion and abrasion resistance

Heat Exchanger Coils

Minimum Order Quantity	12 Square Feet
Usage/Application	Ahu
Brand	Enviro Tech Industrial Products
Voltage	220-380 V
Liquid Flow Rate	0.2-1.0 m/s
Maximum Working	15 bar

We are instrumental in manufacturing and supplying a superior quality assortment of Heat Exchanger Coils. Offered product range is involved in providing solutions for various ventilation problems for commercial and industrial establishments. These products are manufactured using high grade raw material with advanced engineering concepts by our experts. We also offer these products in various specifications detailed by our esteemed clients. clients can avail these products at highly affordable prices.

Air Handling Unit Coils

Size	96” X 14”
Material	Copper, SS, Aluminium
Brand	ETI
Thickness	1-5 mm
Shape	Rectangle

As per the requirements of customers, we are involved in presenting huge array of Air Handling Coils. The Air Handling Unit Coils are available in market at reasonable prices. These Air Handling Coils are frequently used for refrigeration, air conditioning and process. Further, the offered products are highly tested for their quality assurance. We are leading.

Features:

Conform to the safety norms
Robust
Corrosion resistant

Gas To Air Coil

Usage/Application	Ahu
Brand	ETI
Coil Efficiency	0.88%
Coil Inlet Temp	35degC
Glycol Flow Rate	224-67 kg/s

Gas To Air Coil

These Gas to Air Coil offered by us are heavy in weight and takes less preservation cost. These cooling units consume less energy and necessitate very less space to place the products. These products are traded to our consumers at wide range. These cooling units are used in various applications like generator rooms, gas turbine intakes, industrial cooling of hot spots and hot zones.

Specifications:

Connection Form: Thread
Type: Direct Acting
Material: Alloy
Pressure: Ordinary Pressure

Bend Coils

Usage/Application	Ahu
Tube Material	Copper Pipe
Brand	ETI
Fin Material	Aluminium
Extension Spring Material	Oil Tempered Spring Steel Alloy

With the years of experience, we are providing an extensive array of Bend Coils which is highly demanded by clients due to their superior quality. Also, we keep the various demands and requirements of the clients in our mind while developing the range. We offer these Bend Coils to the clients at market leading prices.

Features:

Accurate results
High tensile strength
Rust free

AC Condenser

Usage/Application	Ahu Unit
Brand	ETI
Max Working	4.0 Mpa
Fin Surface	Powder paint, Bare
Working Temperature Range	30-45 degree
Voltage	320 V
Liquid Flow Rate	4.12-15.2 L/s

Being the leading names in the industry, we are manufacturing an extensive range of AC Condenser.

Features:

Excellent functionality
Precisely designed
High efficiency

Refrigeration Coils

Usage/Application	Refrigeration
Material	Copper
Brand	Enviro Tech Industrial Products
Fin Material	Aluminium
Voltage	380-420 V
Frequency	50 Hz
Phase	3 PH
Test Pressure	2.8 Mpa

To meet huge market demands, we are engaged in offering utmost quality of Refrigeration Coils. These Refrigeration Coils are manufactured by our professionals using high grade material and advance technology. Further, the Refrigeration Coils are frequently used in number of applications. Our products are of world class quality.

Features:

High performance
Most reasonable prices
Long functional life

Specifications:

Condensation Forms: Water-Cooled
Type: Steam Condenser
Material: Copper

Heating Coils

Power Source	Electric
Brand	ETI
Usage/Application	Industrial
Voltage	280 V
Thickness	0.6-3 mm
Liquid Flow Rate	4.12-15.2 L/s
Maximum Working Pressure	4.0 Mpa

Captivating the skills of our professionals, we are involved in offering utmost quality of Heating Coils. The offered Heating Coils are extensively used in variety of light commercial applications. Further, we ensure to provide unmatchable quality products to customers and satisfy their entire requirements in all manners.

Features:

Best grade materials
High performance
Long functional life

Ammonia Cooling Coils

Brand	ETI
Usage/Application	Industrial
Voltage	380 V
Capacity	Up to 50 tonne ice capacity per day
Material	Copper, Stainless Steel, Mild Steel, MS plate, 1 1/2′ C class and ISI duty ERW tubes
Frequency	50 Hz

We are offering Ammonia Cooling Coils that are manufactured as per the international quality standards. Finest quality material such as MS plate, 1 1/2′ C class and ISI duty ERW tubes are used in the manufacturing process. Our product-line is appropriate for an ice plant that has up to 50 tonne ice capacity per day and are available in various specifications as per the industrial standards. Furthermore, we offer these products to clients in a spectrum of specifications at incomparable prices.

Features:

Outstanding performance
Sturdy
Durable

Hot Water Coil

Brand	ETI
Application	Boiler, Induction Heater, Water Heater, Automobile
Fin Space	1.0-8.0 mm
Fin Type	Flat fin, Window fin, louver fin, Smooth sine wave fin
Tube O.D.	7mm. 7.94mm, 9mm, 9.52mm, 12.75mm, 15.88mm

The range of products which we supply and manufacture to the customers are inclusive of an excellent range of Hot Water Coil which are used with the hot water, steam and with the glycol solutions and they comprise of thick tube walls, continuous circuit tubes with return bends and strong brazed joints. These products offer a high performance to the customers and they have been made using a high quality of steel. Our products are non-corrosive and they are very affordable.

Features:

Durable
High performance
Trouble free operation

Cooling Coils

Brand	ETI
Usage/Application	Industrial
Voltage	330 V
Liquid Flow Rate	4.12-15.2 L/s
Maximum Working Pressure	4.0 MPa

A wide assortment of Cooling Coils is provided by us to clients at market leading prices. These Cooling Coils are extensively used with furnaces in the vertical position and in many other suitable applications. Further, we ensure to provide best quality products to clients and satisfy their entire requirements and needs.

Features:

Accurate results
Excellent performance
Rust free

Copper Coil

Material	Copper
Size	3/8 INCH, 1/2 INCH,5/8 INCH
Brand	ETI
Pressure	Medium Pressure
Usage/Application	Industrial

We are involved in the manufacture and export of high-quality Copper Coil for our esteemed clients. The base tube of these coils as well as their fin material is made of Copper. These coils help to increase the surface area of the tubes and improve the overall heat transfer efficiency. These coils are highly demanded by our clients for being light-weight, economic and corrosion-resistant.We are leading Copper Coil With Copper Fins manufacturer in DELHI.

Features:

Corrosion-resistant
Light-weight
Economically priced
Improves the overall heat-transfer efficiency

Industrial Steam Coils

Power Source	Electric
Usage/Application	Water Heater
Material	Brass
Brand	Enviro Tech Industrial Products
Copper Pipe	1/2 INCH
Pressure	Ordinary Pressure

We offer steam coils which are highly appreciated among our valued clients for its simple configuration and abrasion resistant features. These are extensively used in varied industrial applications and are offered in varied specifications, which match the entire casing of original unit.

These heating coils are primarily used in:

Steam
Water pre heat
Re heat
Boosters

Copper Fin Tube Coils

Fin Material	Copper
Tube Material	Copper plain, inner grooved surface
Brand	Enviro Tech Industrial Products
Tube Size	5/8″ , 1/2″ , 3/8″
Fin	0.12 mm , 0.16 mm Thick
Max Length	3 mtr
Max Width	1 mtr

Being an eminent company, we are engaged in offering best quality of Copper Fin Tube Coils. These Coils are extensively used in various suitable applications. Moreover, the Copper Coils are offered by us at market leading prices. Customers can avail these Coils in different sizes.

Features:

High durability
Competitive prices
Best grade materials

Heat Transfer Coil

Power Source	Electric
Size	915 mm X 915 mm
Application	Decorations, Heat Sink, Transportation Tools, Door & Window, Glass Wall, Automobile
Surface Treatment	Mill Finish
Brand	Enviro Tech Industrial Products
Coils Size	1/2″ and 3/8″, 5/8″

Heat Transfer Coil We are offering heat transfer coil. All types of coils with 1/2” and 3/8”,5/8”. For commercial and industrial applications. these include water, steam, evaporator, condenser & custom coils. our capacities extend past normal 60,000 sq. Ft. Of coils per month. very few can compete with zeco in areas of quality, response time and value.

Steam Coil

Brand	ETI
Material	Copper
Application	Induction Heater, Water Heater, Boiler, Automobile
Voltage	24 V
Tube Type	Smooth, Grooved
Maximum Working	40 bar
Liquid Flow Rate	19-100 m3/h

We are presenting a qualitative range of Steam Coil to our customers. These Coils can be produced with a diversity of casings and headers to withstand extreme pressure tolerances. We also custom design these circuits and manifolds that enables our clients to exploit their application competence. Moreover, our experts manufacture a top of the line steam coil designed specially for our clients needs.

Condensers Chillers

Material	SS
Weight	1-10 ton
Brand	Enviro Tech Industrial Products
Voltage	220-415 V
Cooling Method	Water-cooled

Leveraging on our vast industry experience, we are providing a broad array of Condensers Chillers. The offered chillers are manufactured by the use of finest grade components along with contemporary techniques at our well-established production unit. Owing to its supreme functionality and excellent chilling capability, these chillers are widely appreciated by our clients. Apart from this, clients can avail these chillers from us at the nominal price.

Features:

Supreme performance
Excellent efficiency
Optimum functionality

Chillers Condenser

Minimum Order Quantity	1 Number
Material	SS
Brand	Enviro Tech Industrial Products
Usage/Application	Industrial Use
Power Source	Electric
Finish	Color Coated

This is accurately developed Chillers Condenser that is used in commercial domain. The talented professionals design and develop these assortments of products using state-of-the-art technology and components. Patrons admire these products for their best quality and satisfactory performance. Additionally, customers can receive presented products at budget friendly prices.

Features:

High strength
Long life
High performance

Blue Fin Coil

Material	SS, MS, Aluminium, Copper
Brand	ETI
Application	Induction Heater, Water Heater, Automobile
Tube Diameter	7-50 mm
Tube Thickness	1-3.5 mm

Leveraging over the skills of our qualified team of professionals, we are instrumental in offering wide range of Blue Fin Coil.

Features:

Optimum performance
Shock proof
Perfect designs

Heat Exchanger

Usage/Application	Paper and Pulping Industry
Medium Pressure	1.6MPa-10.0MPa
Surface	450 Sqm
Dimension	W2500H2500Length 4000 mm
Power	8-500 kW

Steam Heating Radiator in Stainless Steel Pipe MS and in Copper Pipe With Aluminum Fins of Different Sizes For Tumble Dryer.

Cooling and Condenser Coil Manufacture From Delhi

Cooling Coil

Heating Ventilation Air Conditioning Coil

Thermal Oil Coil

Evaporator Coil

Dx Cooling Coil

Chilled Water Coil

Industrial Cooling Coils

HVAC Coil

Anti Corrosive Cooling Coils

Expansion Coils

Double Circuit Cooling Coils

Air Conditioner Coils

A.H.U Cooling Coils

Aluminum Finned Copper Coil

Condenser Coil

Low Temperature Coils

Booster Coil

Automobiles Air Conditioner Coil

Direct Expansion Coils

Heat Exchanger Coils

Air Handling Unit Coils

Gas To Air Coil

Bend Coils

AC Condenser

Refrigeration Coils

Heating Coils

Ammonia Cooling Coils

Hot Water Coil

Cooling Coils

Copper Coil

Industrial Steam Coils

Copper Fin Tube Coils

Heat Transfer Coil

Steam Coil

Condensers Chillers

Chillers Condenser

Blue Fin Coil

Heat Exchanger

admin