+(91)-9871034100
PHONE NO
07AOSPS8386M1ZM
GST NO

Mounting Options Dwyer Instruments

Magnehelic Gauge with S.S. Enclosure

 
 
BrandETIP
MaterialSS
Dial Size4 inch
Material GradeSS304
Rangesmm/wc,In/wc, Pascal
Enclosure TypeConsul Type & Wall Mounting
Front PanelZero Calibration Gas Selector Switch Optional

We are here to offer Magnehelic Gauge With S.S. EnclosureIt is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditionsThese are customized as per as needs of clients.

 

Available in different specifications ranging from:
  • 0-10,
  • 0-25,
  • 0-40,
  • 0-50,
  • 0-100 MM Wc , And
  • 0- 60 pA,
  • 0-250 pA.

Uses:
  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.
 

Sensocon USA Differential Pressure Gauge 10-0-10 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)10-0-10 MM WC
Model No.2300-20MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
AccessoriesTwo 1/8″ NPT barbed fittings,two 1/8″ NPT plugs, and three mounting tabs and screws
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge10-0-10 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog Dial
Measuring Range(mm)6-0-6 MM WC
Model No.2300-10MM
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Resolution0.2
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 deg F (-7 deg to 60 deg C)
ApprovalsRoHS, CE

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc 

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon USA Differential Pressure Gauge 0 To 200 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog
Measuring Range(mm)0 to 200 MM WC
BrandSensocon USA
Model No.S2000-200MM
Accuracy+-2% full-scale
Resolution0.2
Media CompatibilityGases and liquids compatible with wetted materials
Dial Size (in)4
Dial Size (mm)102
Max Pressure (in WC)10
Wetted MaterialsAluminum
CaseAluminum
Lens MaterialAcrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC

Sensocon Usa Differential Pressure Gauge 0 To 200 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog Dial
Measuring Range(mm)0 to 150 MM WC
Model No.S2000-150MM
Accuracy+-2% full-scale
Case And BezelAluminum
Resolution0.2
BrandSensocon USA
Media CompatibilityGases and liquids compatible with wetted materials
Dial Size (in)4
Dial Size (mm)102
Max Pressure (in WC)10
Wetted MaterialsAluminum
Lens MaterialAcrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC
DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 150 MM WC

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc 

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 TO 30 MM WC
Model No.S2000-30MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 15 MM WC
Model No.S2000-15MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 25 MM WC
BrandSensocon USA
Model No.S2000-25MM
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Magnehelic Gauge With SS Enclosure

 
 
BrandENVIRO TECH
Model Name/NumberMagnehelic Gauge With SS Enclosure
Usage/ApplicationIndustrial
MaterialSteel
ConnectionNew
ColorSilver
Size160 X160 X 80 mm
Gauge20 SWG
Warranty1 YERS
Material GradeSS 304
I Deal InNew Only
Country of OriginMade in India

Magnehelic Gauge With SS Enclosure

Price Will Be Change As Per Size And MOC

Sensocon USA Differential Pressure Gauge 0 To 80 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 80 MM WC
Model No.S2000-80MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT
ApprovalsRoHS, CE

 

Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Sensocon 2000-80mm Differential Pressure Gauge0-80 Mm

  • Precision litho-printed scale is accurate and easy to read.
  • Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • “Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
  • Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
  • Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
  • Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
  • Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
  • Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
  • Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
  • Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
  • Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
  • O-ring seal for cover assures pressure integrity of case.

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog dial
Measuring Range(mm)0 to 125 MM WC
Model No.S2000-125MM
BrandSensocon USA
Accuracy+-2% full-scale
Case And BezelAluminum
Resolution0.2
Media CompatibilityGases and liquids compatible with wetted materials
Dial Size (in)4
Dial Size (mm)102
Max Pressure (in WC)10
Wetted MaterialsAluminum
Lens MaterialAcrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC
DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 125 MM WC

 

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

 

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

MS Flesh Type Magnehelic Gauge

 
 
BrandETIP
MaterialPS for Cup, PP for Ring
Measurement ObjectDepth
Gauge TypeLimit Gauge
Surface FinishPolished

We are one of the topmost manufacturer, exporter and supplier of a superior quality range of MS Box Flesh type Magnehelic Gauge. These instruments are designed and made utilizing the finest grade raw material by following high definition engineering principles. Furthermore, these are widely appreciated for some of the salient features like accurate dimension, durability, superior performance and corrosion resistance. We provide these to our clients in both, standard and customized options according to the specific demands of customers.
 

GI Magnehelic Gauge Box

 
 
Display TypeAnalog
MaterialGI Sheet
BrandETIP
Size/Dimension4 inch
Connection TypeAxial
Indicating Pressure ReferenceGeneral Pressure Gauge
Installation StructureConvex

We have been continuously indulged in supplying a high quality array of GI Magnehelic Gauge Box to our highly valued consumers. Our products are highly acclaimed for their performance and quality. These are widely execute in numerous sectors. These products are gettable at leading market prices.

Magnehelic Gauge SS Plate Front Cover

 
 
MaterialSS
BrandETIP
Wetted PartsSS 304
Diameter4 inch
Rangesmm/wc,In/wc, Pascal
Enclosure TypeConsul Type & Wall Mounting
Front PanelZero Calibration Gas Selector Switch Optional

We are here to offer Magnehelic Gauge SS Plate Front CoverIt is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditionsThese are customized as per as needs of clients.

Available in different specifications ranging from:

  • 0-10,
  • 0-25,
  • 0-40,
  • 0-50,
  • 0-100 MM Wc , And
  • 0- 60 pA,
  • 0-250 pA.

Uses:

  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.
 

Magnehelic Gauge L Plat

 
 
MaterialSS
Packaging Type1
Material GradeSS 304
BrandETIP
Wetted PartsSS 304
ApplicationsMagnehelic Gauge L Plat
I Deal InNew Only
Plate ShapeL Shape
Thickness Of Sheet1 mm

L Plat Magnehelic Gauge
  • Sheet SS 304
  • MACK Enviro Tech Industrial Products
  • Application Product MAGNEHELIC GAUGE
  • Thickness Of Sheet 1 MM
 

Magnehelic Gauge Shape Plate

 
 
MaterialSS
Usage/ApplicationMagnehelic Gauge
ShapeSquare
Material GradeSS 304
BrandETIP
Wetted PartsSS 304
Thickness Of Sheet1 mm

MAGNEHELIC GAUGE Shape Plate

  • Sheet —- SS 304
  • MACK —- Enviro Tech Industrial Products
  • Application Product——-MAGNEHELIC GAUGE
  • Thickness Of Sheet——1 MM
  • Center Hole —————100 MM
 

Magnehelic Differential Pressure Gauge SS Box

 
 
BrandETIP
Display TypeAnalog
MaterialStainless Steel
Measurement ObjectLength
Dial TypeDial Indicator

This SS-304, SS-202, stainless steel hinged box has a polished satin finish. This box has a hinged door with a face cutout to accept a Dwyer magnehelic pressure gauge. Box comes complete with holes to accept pressure differential sensors. Box is fabricated with a flanged face for recess mounting.
 

Connection Kit for Pressure Gauge

 
 
MaterialPlastic
BrandETIP
ColorBlack
Size5×8 mm
Tube Length2 m

Connection kit for pressure Gauge:
Used to access pressure measurement points . e.g either side of the filter on an Air Handling Unit. 
 

Mounting Box

 
 
MaterialSS
BrandETIP
Material GradeSS304
Installation StructureDirect Mounting
FunctionLocal Indication Type
Display TypeAnalog


Bracket is Surface Mounted. Steel With Gray Hammer tone Epoxy Finish. For Use With Dwyer Series.

Wall Grouting Box

 
 
BrandETIP
MaterialSS
Wetted PartsSS 304
Weight60 kg
Power2200 W
Size105x50x105 cm
Capacity20 L
Mounting Of Gauge18 SWG
Voltage220 V AC


Wall Grouting Box is a Mild Steel Powder Coated Box with Stainless Steel Front Flush Plate for mounting Differential Pressure Gauges into Brick Walls / Modular Walls.

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

 
 
Minimum Order Quantity1 Number
Dial Size4 inch / 100 mm
BrandDwyer
Pressure Range3-0-3 MM WC
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size1/8 inch
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Agency ApprovalRoHS

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnehelic gauge is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

 
 
Minimum Order Quantity1 Number
Dial Size4 inch / 100 mm
Pressure Range-0.677 to 1.034 bar
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size1/8 inch
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
BrandDwyer USA
Agency ApprovalRoHS
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Overpressure25 psig (1.72 bar)

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Magnehelic Gauge Enclosures

 
 
MaterialSS 304
ShapeSquare, Triangle
BrandENVIRO TECH
ColorBlack
Size/Dimension160 X160 X 80 mm
Mounting Plate Thickness20 SWG
TypeSS 304
Warranty1 YERS
Model Name/NumberMagnehelic Gauge Enclosures
Packaging1
Usage/ApplicationMagnehelic Gauge
I Deal InNew Only
Country of OriginMade in India

Magnehelic Gauge  Enclosures

Price Will Be Change As Per Size And MOC
 

A – 103 Mounting Plate

 
 
Minimum Order Quantity100 No
BrandETIP
MaterialAluminum, SS
Surface FinishPolished
ShapeSquare
Steel GradeSS304

A – 103 Mounting Plate
  • Aluminium / ss metal plate and screws to surface mount the S2000 differential pressure gauge
 

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 500 MM WC
BrandDwyer USA
Model No.2000-500MM
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie cast aluminum case and bezel
Wetted MaterialsConsult Factory
Pressure Limits-20 in Hg to 15 psig
Overpressure25 psig (1.72 bar)
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Agency ApprovalRoHS

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Dwyer USA Magnehelic Gauges 0 To 10 MM WC

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 10 MM WC
BrandDwyer USA
Model No.2300-10MM
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie Cast Aluminum Case And Bezel
Pressure Limits-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar)
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Agency ApprovalRoHS


Dwyer Usa Magnehelic Gauges 0 To 10 Mm

Wcincludes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

 

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

 

Specifications & Description:

  • Accuracy+-2% full-scale
  • Dial Size (in)4
  • Dial Size (mm)102
  • Min Pressure (in WC)0
  • Max Pressure (in WC)10
  • Wetted MaterialsAluminum
  • CaseAluminum
  • Lens Materialacrylic
  • Process Connection1/8″ NPT
  • Unit Of Measurement” WC
  • Displayanalog dial
  • Media CompatibilityGases and liquids compatible with wetted materials
  • Resolution0.20
  • DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 10 MM WC

 

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 TO 6 MM WC
BrandDwyer USA
Model No.2000-6MM
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Size4″ (101.6 mm) diameter dial face
Pressure Limits-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Process Connections1/8″ female NPT
Agency ApprovalRoHS

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:
  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.