admin

Elementor #1943

Oct 12, 2021 by admin 0 Comments

Kimo Make Differential Pressure Transmitter TM110
Rs 25,000 / Piece
Brand	KIMO.
Model Number/Name	TM110 .
Kimo Make Differential Pressure Transmitter TM110 Temperature transmitter type TM110. • Range from 0 to 50 °C (ambient model), from -20 to +80 °C (duct model) and from -100 to 400 °C (model with Pt100 or NTC terminal block) • 0-10 V output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) • ABS V0 housing, IP65 (remote and duct models) or IP20 (ambient model), with or without display • “¼ turn” system mounting with wall-mount plate • Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Kimo Make Differential Pressure Transmitter CO110
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	CO110 .
Kimo Make Differential Pressure Transmitter CO110 CO110 CO transmitter type CO110. Range from 0 to 500 ppm 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65 (depending on model), with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter CO112
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	CO112 .
Kimo Make Differential Pressure Transmitter CO112 CO2 transmitter type CO112. Range from 0 to 5000 ppm 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65 (depending on model), with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHi

Kimo Make Differential pressure transmitter type
Brand	Kimo Make .
Kimo Make Differential pressure transmitter type CP111, CP112, CP113 CO2 transmitter type CO112. Ranges from -100/+100 Pa to -10000/+10000 Pa (according to models) Configurable intermediary ranges 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) • ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Solenoid valve for auto-calibration (only on CP111 model) Differential Pressure Transmitter Type CP111, CP112, CP113 Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential PressureTransmitter TypeCP114, CP115
Kimo Make Differential Pressure Transmitter Type CP114, CP115 CO2 transmitter type CO112. Ranges from -500/+500 mbar to -2000/+2000 mbar (according to models) Configurable intermediary ranges 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Kimo Make Differential PressureTransmitter TypeCP114, CP115

Kimo Make Differential Pressure Transmitter Type
CP114, CP115

CO2 transmitter type CO112.

- Ranges from -500/+500 mbar to -2000/+2000 mbar
  (according to models)
- Configurable intermediary ranges
- 0-10 V or 4-20 mA output, active, power supply
  24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive
  loop, power supply from 16 to 30 Vdc (2 wires)
- ABS V0 housing, IP65, with or without display
- “¼ turn” system mounting with wall-mount plate
- Housing with simplified mounting system

Additional Information:

- Pay Mode Terms: T/T (Bank Transfer)

Kimo Make Differential Pressure Transmitter CP116
Brand	Kimo Make .
Kimo Make Differential Pressure Transmitter CP116 CP116 Atmospheric pressure transmitter type CP116 Measuring range from 800 to 1100 hPa Indication of the pressure in mbar, mmHG ou hPa 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Solenoid valve for auto-calibration (only on CP111 model) Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter CTV110
Brand	Kimo .
Kimo Make Differential Pressure Transmitter CTV110 Temperature and air velocity transmitter type CTV110. Measuring range from 0 to 30 m/s and from 0 to 50 °C 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Alternating display of air velocity and temperature Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter TH110
Brand	Kimo .
Kimo Make Differential Pressure Transmitter TH110 Humidity and temperature transmitter type TH100. Measuring range from 5 to 95%RH and from 0 to 50 °C (ambient model) or from -20 to +80 °C (duct or remote model) 0-10 V output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing IP65 (duct or remote model) or IP20 (ambient model), with or without display Alternating display of humidity and temperature. Housing with simplified mounting system “¼ turn” system mounting with wall-mount plate Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter HM110
Brand	KIMO .
Model Number/Name	HM110 .
Kimo Make Differential Pressure Transmitter HM110 HM110 Humidity transmitter type HM110. Measuring range from 5 to 95%RH 0-10 V output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing IP65 (duct or remote model) or IP20 (ambient model), with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter CR110
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	CR110 .
Kimo Make Differential Pressure Transmitter CR110 Solar radiation transmitter type CR110. Range from 0 to 1500 W/m² 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter LR110
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	LR110 .
Kimo Make Differential Pressure Transmitter LR110 Light transmitter type LR110. Range from 0 to 10000 lux 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Humidity Transmitters Wholesale Dealers in India

Elementor #1923

Oct 12, 2021 by admin 0 Comments

RHP-2D10 DWYER Humidity Temperature Transmitters
Rs 12,500 / Piece
Model Name/Number	RHP-2D10 .
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Item	RHP-2D10 DWYER Humidity Temperature Transmitter .
Usage/Application	Pharma .
Warranty	YAS .
Temperature Range	No .
Size	4 in x 4.4 in x 11.75 in .
RHP-2D10 DWYER Humidity Temperature Transmitter Overview Dwyer Instruments Humidity Sensors, RHP Series Item# RHP-2D10 – Duct Mount Humid- Ity Transmitter Wtih 2% Sensor And 4-20 Ma Output RHP Series Information The Series RHP Temperature and Humidity Transmitter Combine the Voltage or Current Humidity Transmitter output with a passive Temperature Thermistor or RTD output. Featuring Polymer Capacitance Humidity Sensors, Models are available in 2%, 3% or 5% accuracies. Duct mounted Transmitters are available with an optional two-line alpha numeric LCD Display. Product Applications Air Economizers Outdoor Temperature and Relative Humidity Reference Pool Room Humidity Monitoring Specifications Item Number: RHP-2D10 Brand:Dwyer Instruments Item Category:HVAC Sensors Subcategory:Humidity Sensors Series:RHP Application:Duct Input:10~35 VDC Output:4~20 mA Display:None Humidity Range:0 to 100% RH Temperature Sensor:No Approvals:CE H x W x D:4 in x 4.4 in x 11.75 in Net Weight:8.24 oz Gross Weight:1 lb Additional Information: Packaging Details: EXTRA

Relative Humidity And Temperature Transmitter
Rs 16,500 / Piece
Warranty	YAS .
Brand	DWYER USA .
Model Number	SERIES 657 .
Pressure	1 psi (.07 bar). .
Power Supply	10-35 VDC. .
Electrical Connection	4 screw type terminal. .
Condition	New .
Weight	5.5 oz (156 g). .
Relative Humidity And Temperature Transmitter The SERIES 657 Transmitters provide two 4 to 20 mA channels to produce separate output signals for both relative humidity and temperature. These devices deliver ±2% accuracy for humidity and ±1°F for temperature measurements. Stainless steel probe can be easily mounted to most ductwork using either of the two optional kits below. Features: Polymer film humidity and thin film RTD temperature sensors offer highly reliable and stable measurements Remote mount housing offers installation flexibility (657-1) Rugged die-cast aluminum housing is great for industrial applications (657C-1) Specification: Service : Dry clean air. Range : Relative Humidity: 0-100%; Temperature: 32 to 212°F (0 to 100°C). Accuracy : Relative Humidity: ±2% (10-90% RH), ±3% (0-10% and 90-100% RH); Temperature: ±1°F (0.5°C). Applications: Cleanroom monitoring HVAC/building control monitoring Additional Information: Item Code: Model-657-1

Outside Air Humidity Radiation Shield

Rs 12,500 / Piece

Condition

New

Model Number

Series-RHRS

Brand

DWYER USA

Outside Air Humidity Radiation Shield

The SERIES RHRS Radiation Shield protects outside air humidity transmitters from rain and radiated heat. With the curved shape and color of the plates, air flow is able to move across the sensor to keep radiated temperatures from rooftops and surrounding surfaces from affecting humidity readings. For ease of installation, the Series RHRS has integral pipe mounting hardware which can be removed for surface mounting applications. The brackets on the Series RHRS are specifically designed to be installed on the Dwyer Series RHP outside air humidity transmitters with sintered filters.

Features:

Adjustable sensor mounting collar works with Dwyer RHP sintered filter outdoor air humidity transmitters or other RH devices

Installation:

Loosen plastic probe retainer on radiation shield by unscrewing two retainer screws.
Slide humidity transmitter probe completely into radiation shield.
Screw plastic probe retainer to the radiation shield until the probe is firmly held in place. Do not over tighten the screws.

For Pipe Mounting:

Remove the u-bolt from the mounting bracket.

For Surface Mounting:

Remove the u-bolt and the screw holding the pipe retaining bracket.
Mark the outer two holes of the mounting bracket on the surface.
Drill the two holes marked in the previous step into the surface.
Attach the radiation shield to the surface.

Applications:

Building outside air reference
Weather stations

Additional Information:

- Item Code: Series-RHRS

Other Details:

Model	Description
RHRS	6 plate solar radiation shield for sintered filter version RH transmitters.
RHRS-10	10 plate radiation shield for humidity transmitters

Dew Point Transmitter
Rs 6,500 / Piece
Application	Industrial .
Weight	0.3 lb (0.14 kg). .
Brand	Dwyer Usa .
Wall Mount Humidity / Temperature / Dew Point TransmitterWall Mount Humidity / Temperature / Dew Point Transmitter The Series RHP-W Wall Mount Humidity/Temperature/Dew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. An optional LCD display can be integral to the transmitter or a remote display can be ordered for building balancing or LEED® validation. The LCD display indicates the ambient temperature along with the humidity or dew point. The transmitter has internal dip switches to select the temperature engineering units and whether the transmitter outputs humidity or dew point. The humidity and temperature sensors are field replaceable to reduce service cost and inventory. The humidity and the dew point are measured using a capacitive polymer sensor that completely recovers from 100% saturation. The humidity and dew point can have either a current or voltage output, while the optional temperature output can be a current, voltage, RTD or thermistor. For models with current or voltage for the temperature output, the temperature range is field selectable. Specification: Temperature Range : -40 to 140°F (-40 to 60°C) for thermistor and RTD sensors. -20 to 140°F (-28.9 to 60°C) for solid state band gap temperature sensors. Dew Point Temperature Range : -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C) field selectable ranges. Accuracy : >RH: Model RHP-2XXX ±2% 10-90% RH @ 25°C, Model RHP-3XXX ±3% 20-80% RH @ 25°C, Thermistor temperature sensor: ±0.36°F @ 77°F (±0.2°C @ 25°C), RTD Temperature sensor: DIN Class B; ±0.54°F @ 32°F (±0.3°C @ 0°C), Solid state band gap temperature sensor: ±0.9°F @ 77°F (±0.3°C @ 25°C). Temperature Limits : Operating: -40 to 140°F (-40 to 60°C); Storage: -40 to 176°F (-40 to 80°C). 4-20 mA Loop Powered Output: >Power Requirements: 10-35 VDC. Output Signal: 4-20 mA, 2 channels for humidity/solid state temperature sensor models (loop powered on RH). Switch selectable RH/dew point. Switch selectable normal or reverse output. 0-5/10V Outputs: >Power Requirements: 15-35 VDC or 15-29 VAC. Output Load: 5 mA max., 2 channels for humidity/solid state temperature sensor models. Switch selectable 0-10V/2-10V or 0-5V/1-5V output. Switch selectable RH/dew point. Switch selectable normal or reverse output. Solid State Band Gap Temp Sensor Output Ranges : Switch selectable, -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C). Electrical Connections: Screw terminal block. Drift : <1% RH/year. RH Sensor : Capacitance polymer. Enclosure Material : Warm gray polycarbonate. Display : Optional LCD, backlit on 0-5/10V models. Switch selectable %RH or dew point, °F/°C. Display Resolution : RH: 1%; Temperature: 0.1°F (0.1°C); Dew Point: 1°F (1°C). Additional Information: Item Code: Series-RHP-W

Carbon Dioxide Transmitter

Rs 12,500 / Piece

Model Name/Number

Series-CDWP Yes

Brand

DWYER USA

Measurement Range

CO2 0 to 2000,0 to 5000,or 0 to 10000 ppm (depending on model).

Weight

26.24 oz (744 g).

Accuracy

CO2 +/-40 ppm +/-3% of reading.
.

Place Of Origin

DELHI

Condition

New

Carbon Dioxide Transmitter

The SERIES CDWP Carbon Dioxide Transmitters accurately monitor the CO2 concentration in industrial, agricultural, and indoor environments to help achieve energy savings. The IP54 die cast aluminum housing was designed for harsh environments making it ideal for animal husbandry and HVAC mechanical rooms. For increased sensor life and accuracy, a single-beam dual-wavelength non-dispersive infrared (NDIR) sensor is used to eliminate light source aging affects. This sensing technology provides the highest level of accuracy compared to Automatic Baseline Correction methods, which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions.

Features:

IP54 aluminum housing
Gray finish designed to withstand 168 hour salt spray test
Single-beam dual-wavelength sensor automatically corrects for aging effects
Measures unfiltered light intensity directly and eliminated error from incorrect assumptions of gas concentration in theoretical logic assumption methods
Universal outputs to work with any building management

Specification:

Sensor : Single beam, dual-wavelength NDIR.
Power Consumption : Average: 2 w; Peak: 3.75 w.
Output : Current: 4 to 20 mA (max. 500 Ω); Voltage: 0 to 5 VDC or 0 to 10 VDC (min. 500 Ω).
Mounting Orientation : Vertically, with electrical connections points downward.

Applications:

Animal Husbandry
Mechanical Room
CO2 Refrigeration Monitoring
Greenhouses

Power Supply:
Choose a power supply with a voltage and current rating sufficient to meet the power specifications under all operating conditions. If the power supply is unregulated, make sure the output voltage remains within the required voltage range under all power line conditions

Maintenance/Repair:
Upon final installation of the Series CDWP, no routine maintenance is required. The Series CDWP is not field serviceable and it is not possible to repair the unit. Field repair should not be attempted and may void warranty.

Warranty/Return:
Refer to “Terms and Conditions of Sale” in our catalog and on our website. Contact customer service to receive a Return Goods Authorization number before shipping the product back for repair. Be sure to include a brief description of the problem plus any additional application notes.

Other Details:

Model	Description
CDWP-05H-C1	Industrial CO2 Transmitter, 0-5000 PPM range, hang mount, with 1-6 mm cable gland
CDWP-05H-C5	Industrial CO2 Transmitter, 0-5000 PPM range, hang mount, with 5-10 mm cable gland
CDWP-05W-C1	Industrial CO2 Transmitter, 0-5000 PPM range, wall mount, with 1-6 mm cable gland
CDWP-05W-C5	Industrial CO2 Transmitter, 0-5000 PPM range, wall mount, with 5-10 mm cable gland
CDWP-10H-C1	Industrial CO2 Transmitter, 0-10,000 PPM range, hang mount, with 1-6 mm cable gland
CDWP-10H-C5	Industrial CO2 Transmitter, 0-10,000 PPM range, hang mount, with 5-10 mm cable gland
CDWP-10W-C1	Industrial CO2 Transmitter, 0-10,000 PPM range, wall mount, with 1-6 mm cable gland
CDWP-10W-C5	Industrial CO2 Transmitter, 0-10,000 PPM range, wall mount, with 5-10 mm cable gland

Additional Information:

- Packaging Details: EXTRA

Compact USB Data Logger with Display

Rs 12,000 / Piece

Model Name/Number

Series-DW-USB-LCD

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

Power Supply

3.6 V 1/2 AA lithium metal battery, included, user replaceable.

Display

2.5 digit LCD

Usage

Industrial
.

Temperature Range

1 Degree F (0.5 Degree C)

Compact USB Data Logger with Display

The SERIES DW-USB Compact USB Data Logger allows users to monitor temperature, humidity, dew point, voltage, current, or carbon monoxide almost anywhere, and then download stored data by simply plugging the module directly into a PC’s USB port. The compact housing can resist moisture up to IP67 when the protective cap is attached, and has built in LED’s to indicate an alarm has been met or the battery is low. Using the included Windows® based software, users can set the sampling rate, start time, high/low alarms, and temperature unit.

Specification:

Range:DW-USB-2-LCD: Temperature: -31 to 176° F (-35 to 80°C), Humidity: 0 to 100% RH; DW-USB-2-HA-LCD: Temperature: -31 to 176° F (-35 to 80°C), Humidity: 0 to 100% RH; DW-USB-6-LCD: K-type: -328 to 2372°F (-200 to 1300°C), J-type: -202 to 1652°F (-130 to 900°C), T-type: -328 to 662°F (-200 to 350°C).
Accuracy:DW-USB-2-LCD: Temperature ±1°F (±0.5°C) Humidity ±3.0%; DW-USB-2-HA-LCD: Temperature ±0.6°F (±0.3°C), Humidity ±2.0%; DW-USB-6-LCD: ±2°F (±1°C).
Memory Size : Thermocouple models: 32510 readings; Temperature/humidity models: 16382 readings.
Sampling Mode : Continuous with data rollover.
Sampling Rate : Selectable from 10 seconds to 12 hours for temperature/humidity models; 1 second to 12 hours for thermocouple models.
Computer Requirements : Windows® 2000, Windows® XP, Windows® 7, Windows VISTA® 32-bit or 64-bit operating systems.
Alarms : Programmable high/low.
Weight : Temperature/humidity models 1.6 oz (45.4 g); Thermocouple models 1.8 oz (51 g).

Button Operation:
The button performs two functions:

To start the logger when in push to start mode.
To enable the display and cycle through the available display modes (see diagram below).

Battery Installation:
Before using the data logger, you will need to insert the 3.6 V 1/2 AA battery provided, following the instructions below.

Use screwdriver to gently depress tab of the battery compartment.
Pull battery cover towards you, away from the unit.
Install the battery, taking note of polarities.
Replace battery cover. Cover is secure when tab returns to original position

Maintenance:
Upon final installation of the Compact DW-USB-LCD Data Logger, no routine maintenance is required. Leaving the logger plugged into your computer for an extended period of time will considerably lower its battery life. A periodic check of system calibration is recommended. The Series DW-USB-LCD is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.

Other Details:

Model	Description
DW-USB-1-LCD	Compact USB data logger, temperature with LCD.
DW-USB-2-HA-LCD	Compact USB data logger, high accuracy temperature/humidity/dew point input, with LCD.
DW-USB-2-LCD	Compact USB data logger, temperature/humidity/dew point input, with LCD.
DW-USB-6-LCD	Compact USB data logger, thermocouple input, with LCD.

Request
Callback

Additional Information:

Item Code: Series-DW-USB-LCD

Graphical Display Data Logger
Rs 12,000 / Piece
Model Name/Number	Model-GDL .
Brand	Dwyer Usa .
Accuracy	+/-2% RH, from 10 to 90% RH. .
Usage/Application	Industrial .
Warranty	YAS .
Memory	43344 temperature; 21672 temperature, RH and dew point..
Weight	7 oz (20 g). .
Graphical Display Data Logger The Model GDL Graphical Display Data Logger can record and instantly display temperature, humidity, and dew point trends in a text or graphic format. The GDL has internal temperature and humidity sensors. With the included Windows® based software, the user can select the sampling interval, high/low alarms, logging channels, and recording start time. Over 40,000 data points can be recorded and the measured data stays secure with a recording session counter and password-protected calibration. Features: Measurements displayed in text or graph Able to record over 40,000 data points and download them to a PC Includes logging summary with details of the sample rate and memory status Specification: Sampling Method : Stop on memory full or continuous recording. Sampling Rate : Second to 18 hours, 1 second increments. Computer Requirements : Windows® 98 and above (software included). Power Requirements : (3) AA alkaline batteries, installed functional, user replaceable. Alarms : Programmable high/low. Interface : USB port (cable included). Applications: Greenhouses/florists Medical storage facilities Refrigeration systems Additional Information: Item Code: Model-GDL

Humidity Switch

Rs 2,500/ Piece

Model Name/Number

Series-HS

Brand

Dwyer Usa

Accuracy

THC-P +/-5% @ 20 to 90%; HS +/-1% RH.

Humidity

10 to 100% RH.

Power Supply

115 VAC or 230 VAC
.

Humidity

10 to 100% RH.

Display

3-digit, green, 1/2″ (12.7 mm) digits.

Humidity Switch

The SERIES HS Humidity Switch provides control for humidifying or dehumidifying systems. Relative humidity, output status, and error messaging can be viewed on the bright green LED. Access to programming parameters can be locked for security purposes using the password protection feature.

Features:

Relative humidity display and control
Parameter protection

Applications:

Industrial Chillers
Environmental Chambers
Walk-ins and Freezers
Heat Sealers
Mug Frosters
Coolers
Display Cases and Cabinets
Meat and Produce Storage
Floral Preservation
Refrigerated Transportation
Laboratories
Food Service Equipment
Ovens and Dryers
Greenhouses
Museums
Monitor Humidity in Ducts

Installation:

Cut hole in panel 2.80 x 1.14 inches (71 x 29 mm).
Apply silicone (or rubber gasket) around the perimeter of the hole to prevent leakage.
Insert unit into hole of panel.
Slide removable fitting clips onto unit from the back until secure to panel.
Remove back cover to wire unit.
Wiring diagram is displayed on the top of the unit

Maintenance/Repair:
Upon final installation of the Series HS Humidity Switch, no routine maintenance is required. A periodic check of system calibration is recommended. The devices are not field repairable and should be returned to the factory if recalibration or other services is required. After fir obtaining a Returned Goods Authorization (RGA) number, end the material, freight prepaid, to the following address. Please include a clear description of the problem plus any application information available.

Other Details:

Model	Description
HS-111	Humidity switch, 0-1 V input sensor, 110 VAC supply voltage.
HS-112	Humidity switch, 0-1 V input sensor, 230 VAC supply voltage.
HS-311	Humidity switch, 0-3 V input sensor, 110 VAC supply voltage.
HS-312	Humidity switch, 0-3 V input sensor, 230 VAC supply voltage.
HS-411	Humidity switch, 4-20 mA input sensor, 110 VAC supply voltage.
HS-412	Humidity switch, 4-20 mA input sensor, 230 VAC supply voltage.

Additional Information:

Item Code: Series-HS

Humidity and Temperature Transmitter

Rs 16,500 / Piece

Response Time

Less than 15 S

Brand

Dwyer Usa

Power

10 to 35 VDC.

Condition

New

Warranty

YAS
.

Relative Humidity Range

0 to 100% RH.

Humidity and Temperature Transmitter

The SERIES RH-R Humidity Transmitter is the ideal transmitter for those applications where space is limited. The compact sensor is protected by a removable filter. It can be mounted up to 16 feet away from the weatherproof base. The Series RH-R is ideal for environmental chambers, rubber bladder burst detection and air handler applications.

Features:

Remote housing allows for flexibility sensing where space may be limited

Applications:

Process system monitoring
Environmental chambers
Air economizers

Installation:
Make sure all connections are in accordance with the job wiring diagram and in accordance with national and local electrical codes. Use copper conductors only.Do not make changes to the cable lengths. Sensors are factory calibrated for supplied length of cable. Optional lengths are available from the factory.

Caution:
Use electrostatic discharge precautions (e.g., use of wrist straps) during installation and wiring to prevent equipment damage.
Avoid locations where severe shock or vibration, excessive moisture or corrosive fumes are present. NEMA Type 4X (IP65) housings are intended for outdoor use primarily to provide a degree of protection against wind-blown dust, rain, and hose directed water.
Do not exceed ratings of this device, permanent damage not covered by warranty may result. The 4 to 20 mA models are not designed for AC voltage operation.

OSA (Outside Air):

The transmitter should be mounted under an eave, shield, or in an area that is out of
the elements or direct sunlight.
Remove the cover plugs from the face of the unit and the top cover.
Position the transmitter where it is to be mounted and mark the mounting holes in each corner of the housing.
Drill or punch out marked locations.
Place the transmitter box over mounting holes on wall and align. Install wall mount screws (not provided) in mounting holes.
Proceed with wiring according to Figure 2.
Replace cover and cover plugs on the face of the unit.

Maintenance:
Upon final installation of the Series RH-R Temperature/Humidity Transmitter and the companion receiver, no routine maintenance is required. A periodic check of the system calibration is recommended. The Series RH-R is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization
number before shipping.

Other Details:

Model	Description
RHT-R008	Humidity/Temperature Transmitter, 8′ cable, current output.
RHT-R016	Humidity/Temperature Transmitter, 16′ cable, current output.
RHT-R108	Humidity/Temperature Transmitter, 8′ cable, voltage output.
RHT-R116	Humidity/Temperature Transmitter, 16′ cable, voltage output.
RHU-R008	Humidity Transmitter, 8′ cable, current output.
RHU-R016	Humidity Transmitter, 16′ cable, current output

Additional Information:

Item Code: Series-RH-R

Temperature and Humidity Switch

Rs 9,500 / Piece

Model Name/Number

Series-THC

Brand

Dwyer Usa

Horsepower Rating

1/3 HP.

Ambient Operating Temperature

32 to 158 Degree F (0 to 70 Degree C).
.

Storage Temperature

-4 to 176 Degree F (-20 to 80 Degree C).

Power

110 or 230 VAC (depending on model).

Display Configuration

Two 3-digit displays. 1/2″ digits..

Panel Cutout

5.15″ x 3.97″ (131 x 101 mm).

Weight

1.17 lb (530 g)

Temperature and Humidity Switch

The SERIES THC simultaneously measures and controls temperature and humidity. The unit offers a 3-digit red display for temperature indication and a 3-digit green display indicating humidity. The Series THC is equipped with four independent relays, two for temperature control and two relays for humidity control. The THC Temperature/Humidity Switch accepts up to two temperature probe inputs (sold separately) and a humidity sensor.

Features:

Temperature and humidity control in one device
Password protected parameter settings
Selectable fail safe status of relay outputs

Specification:

Measurement Range : Temperature: -58 to 302°F (-50 to 150°C); Humidity: 10 to 100% RH.
Input : Up to 2 thermistors and 1 humidity sensor.
Output : 4 SPST, 8 A relays @ 250 VAC.
Control Type : On/Off direction, direct or reverse acting, neutral.
Accuracy : Temperature: ±0.5% of probe range; Humidity: ±3% (20 to 90%) of range.

Applications:

Isolation chambers
Environmental chambers
Greenhouses

Other Details:

Model	Description
THC-10	Temperature/humidity switch, °F, 110 VAC.
THC-11	Temperature/humidity switch, °C, 110 VAC.
THC-20	Temperature/humidity switch, °F, 230 VAC.
THC-21	Temperature/humidity switch, °C, 230 VAC.

Additional Information:

Item Code: Series-THC

Button Data Logger

Rs 2,100 / Piece

Model Name/Number

Series-BDL

Brand

Dwyer Usa

Usage/Application

Industrial

Warranty

YAS
.

Battery Life

BDL-1 10 yrs. (approx), BDL-2 5 yrs. (approx).

Graphical Display Data Logger

The Model GDL Graphical Display Data Logger can record and instantly display temperature, humidity, and dew point trends in a text or graphic format. The GDL has internal temperature and humidity sensors. With the included Windows® based software, the user can select the sampling interval, high/low alarms, logging channels, and recording start time. Over 40,000 data points can be recorded and the measured data stays secure with a recording session counter and password-protected calibration.

Button Data Logger

The Series BDL Button Data Logger records temperature and humidity in applications where size and cost effectiveness are vital. Housed in a compact stainless steel case, the BDL is durable in hostile environments, while also being able to be inserted in small items and packages. The Series BDL-K Logger Kit includes 2 buttons, 2 magnets, an interface cable, and a plastic button holder.

Features:

Compact to fit in small areas and durable to work in hostile environments
Self-powered unit gives no need for external power supply
Magnetic mounting for quicker installation

Specification:

Range : BLD-1: -40 to 185°F (-40 to 85°C); BDL-2: -4 to 185°F (-20 to 85°C); 0 to 100% RH.
Memory Size : BDL-1: 2048 readings; BDL-2: 4096 temperature and 4096 humidity readings (low resolution), 2048 temperature and 2048 humidity readings (high resolution).
Accuracy : BDL-1: ±1.5°F (±1°C) from -22 to 158°F (-30 to 70°C); BDL-2: ±0.9°F (±0.5°C) from 14 to 158°F (-10 to 70°C), ±5% RH.
Sampling Method : Stop on memory full or continuous recording.
Sampling Rate : BDL-1: Selectable from 1 to 255 m.; BDL-2: Selectable from 1 s. to 24 hrs.
Computer Requirements : Windows® 98, Windows® 2000, Windows® ME, Windows NT®, Windows® XP, and Windows Vista® operating system with 16 MB RAM, one free USB port.
Alarms : Programmable high/low.

Applications:

Food processing verification
Pharmaceutical storage
Transportation of temperature sensitive goods
HVAC system testing and balancing

Software Installation:

Ensure that no applications are running.
Insert the installation CD and select the install option from the menu.
Follow the onscreen instructions.
Restart the computer. A new icon will be placed on the desktop.
After installing the software, connect the logger.
The first time you open the software, you will be prompted to enter a password. The password will only be used if you decide to use the security functions. Enter and take note of the password.

Software Features:

Graphing of downloaded data
Zooming function
Temperature in °F or °C
Up to two traces per graph
Multiple traces per graph (Full Version Only)
Exporting to spreadsheet (Full Version Only)
Viewing the data table (Full Version Only)
Calculating Mean Kinetic Temperature (MKT) (Full Version Only)
Emailing graphs (Full Version Only)

Maintenance:

Upon final installation of the Series BDL Button Data Logger, no routine maintenance is required.
Fast logging will considerably shorten the battery life. To preserve battery life, it is recommended to use the longest practical sampling rate, and when the logger is not in use, to set the sampling rate to the longest option.
A periodic check of system calibration is recommended. The Series BDL is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.

Other Details:

Model	Description
BDL-K1	Temperature button data logger kit with (2) BDL-1, (1) USB interface, and (1) clip.
BDL-K2	Temperature and humidity button data logger kit with (2) BDL-2, (1) USB interface, and (1) clip.

Additional Information:

Item Code: Series-BDL

Weather Resistant Humidity and Temperature Transmitter

Rs 15,000 / Piece

Temperature Range

-40 to 140 Degree F (-40 to 60 Degree C).

Brand

Dwyer Usa

Storage Temperature

-40 to 176 Degree F (-40 to 80 Degree C)..

Condition

New

Warranty

YAS
.

Weather Resistant Humidity and Temperature Transmitter

The compact SERIES WHT Humidity/Temperature Transmitter is designed to withstand the elements. A removable sintered filter protects the polymer capacitance sensor from solid objects that may come in contact with the transmitter. The transmitter is available with 4 to 20 mA or 0 to 10 VDC output signals for both temperature and humidity. This transmitter is ideal for measuring outside air temperature and humidity levels for air handling economizer applications.

Features:

RH or RH and temperature outputs
Compact NEMA 3S construction

Specification:

Accuracy, RH : ±3% 20 to 80% RH, ±4% @ 10 to 20%, 80 to 90%.
Accuracy, Temp Models with 4 to 20 mA Temp. Output : ±0.9°F @ 72°F (±0.3°C @ 25°C).
Accuracy, Temp Models with Passive Thermistor Temp Sensor : ±0.4°F @ 77°F (±0.22°C @ 25°C).
Compensated Temperature Range, RH : -4 to 140°F (-20 to 60°C).
4-20 mA Loop Powered Models : Power Requirements: 10 to 35 VDC; Output Signal: 4 to 20 mA.
0 to 10 V Output Models : Power Requirements: 15 to 35 VDC or 15 to 29 VAC; Output Signal: 0 to 10 V @ 5 mA max.
0 to 5 V Output Models : Power Requirements: 10 to 35 VDC or 10 to 29 VAC; Output Signal: 0 to 5 V @ 5 mA max.
Electrical Connections : Removable screw terminal block.
Drift : <1% RH/year.
RH Sensor : Capacitance polymer.
Temperature Sensor: 4 to 20 mA output, solid state band gap. Passive output: 10K @ 25°C thermistor (Dwyer curve A).

Installation:
Caution:
Use electrostatic discharge precautions during installation and wiring to prevent equipment damage.
Avoid locations where severe shock or vibration, excessive moisture or corrosive fumes are present. NEMA Type 3S (IP54) housings are intended for outdoor use primarily to provide a degree of protection against wind-blown dust, and rain. The 4-20 mA models are not designed for AC voltage operation.

Mounting:
The transmitter should be mounted with the sensor pointing downward to prevent water collection in the housing. The integral mounting tab has two sets of mounting holes. The larger holes are for the suspension mounting and the smaller holes are for surface mounting the transmitter to a wall. Please see Figure 1 and 2 for more information on both mounting method

Other Details:

Model	Description
WHT-310	Water-resistant humidity transmitter with sintered filter, 3% accuracy, 4-20 mA humidity output.
WHT-311	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 mA humidity and temperature output.
WHT-31A	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 mA humidity output and 10K Ω Type III, curve A temperature output.
WHT-320	Water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity output.
WHT-322	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity and temperature output.
WHT-32A	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity output and 10K Ω Type III, curve A temperature output.
WHT-330	Water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-5 VDC humidity output.
WHT-333	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-5 VDC humidity and temperature output.

Additional Information:

Item Code: Series-WHT

Hazardous Area Humidity and Temperature Transmitter

Rs 16,250 / Piece

Temperature Range

-40 to 140 Degree F (-40 to 60 Degree C).

Brand

Dwyer Usa

Condition

New

Response Time

Hazardous Area Humidity and Temperature Transmitter

The SERIES HHT Hazardous Area Humidity/Temperature Transmitter takes accurate measurements in the harshest of environments. The explosion-proof model is offered with 4 to 20 mA output for humidity only. The intrinsically safe version is offered with 4 to 20 mA output for humidity and temperature, and do require an intrinsically safe barrier to meet hazardous area approvals. It is important to develop a routine schedule for replacing the RH/temperature sensor (part number A-451). The sensor should be replaced annually or sooner depending on application conditions.

Features:

FM approved explosion-proof and intrinsically safe models
Integral LCD option
Replaceable calibrated sensor for long term use in harsh environments
Dual temperature and relative humidity output models

Specification:

Service : Dry clean air.
Accuracy : ±2% 10 to 90% RH, ±0.9°F at 72°F (±0.3°C at 25°C).
Power Requirements : For instrinsically safe models HHT-IX, 9.5 to 28 VDC. For explosion-proof models HHT-EX, 16.5 to 28 VDC.
Output Signal : 4 to 20 mA, 2 channels for humidity/temperature models (loop power on RH).
Electrical Connections : Screw terminal block.
Drift : <1% RH/year.
RH Sensor : Capacitance polymer.
Temperature Sensor : Solid state band gap.
Housing Material : Aluminum.
Display : Optional 2 line alpha numeric, 8 characters/line. Temperature display is °F/°C selectable.
Display Resolution : RH: 0.1%; Temperature: 0.1°F (0.1°C).
Enclosure Rating : NEMA 4X (IP66). Models HHT-EX: FM Explosion-proof, Class I Div. 1 Group B, C, D, Class II Div. 1 Group E, F, G, Class III Div. 1; Models HHT-IX: FM Instrinsically Safe, Class I Div. 1 Group A, B, C, D, Class II Div. 1 Group E, F, G, Class III Div. 1 T4.

Applications:

Process monitoring
Offshore HVAC monitoring
Dust and grain handling

Other Details:

Model	Description
HHT-EU	Explosion-proof humidity transmitter.
HHT-EU-LCD	Explosion-proof humidity transmitter with LCD display.
HHT-IT	Intrinsically safe humidity/temperature transmitter.
HHT-IT-LCD	Intrinsically safe humidity/temperature transmitter with LCD display.
HHT-IU	Intrinsically safe humidity transmitter.

Additional Information:

Item Code: Series-HHT

Galaxy Differential Pressure Gauge

Elementor #1907

Oct 12, 2021 by admin 0 Comments

Low Cost Galaxy Differential Pressure Gauge
Rs 1,976 / Piece
Brand	Sensocon USA .
Low Cost Galaxy Differential Pressure Gauge We are leading supplier and trader of Low Cost Galaxy Differential Pressure Gauge. Kindly find below product details of Low Cost Galaxy Differential Pressure Gauge. Product Details:: Pressure Range Model Number Pressure Range Pa / kPa 0 – 0.25” S2000-60PA 0 – 60 0 – 0.5” S2000-125PA 0 – 125 0 – 1” S2000-250PA 0 – 250 0 – 2” S2000-500PA 0 – 500 0 – 3” S2000-750PA 0 – 750 0 – 4” S2000-1KPA 0 – 1 0 – 5” S2000-1.5KPA 0 – 1.5 0 – 6” S2000-2KPA 0 – 2 0 – 8” Zero Center 0 – 10” S2300-60PA 30 – 0 – 30 0 – 15” S2300-120PA 60 – 0 – 60 0 – 20” S2300-250PA 125 – 0 – 125 0 – 25” mm w.c. 0 – 30” S2000-6MM 0 – 6 0 – 50” S2000-10MM 0 – 10 0 – 100” S2000-25MM 0 – 25 Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Make Magnehelic Differential Pressure Gauges
Rs 3,500 / Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Galaxy Make Magnehelic Differential Pressure Gauges Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Low Cost Galaxy Differential Pressure Gauges
Rs 3,500 / Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Low Cost Galaxy Differential Pressure Gauges Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Make Magnehelic Gauge

Brand	Galaxy Make .
Galaxy Make Magnehelic Gauge Our specialization lies in offering a commendable range of Galaxy Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices. Features: Compact size Easy installation Accuracy Specifications : Application: Industrial Structure: Spring Pressure Gauge Connection Type: Radial Direction Function: Local Indication Type Indicating Pressure Reference: Differential Pressure Gauge Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Make Magnetic Gauge
Rs 3,500 / Piece
Brand	Integerated Engineers India .
Galaxy Make Magnetic Gauge Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Magnehelic Gauge
Rs 3,500 / Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Galaxy Magnehelic Gauge Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Galaxy Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame. Features: Long service life High functionality Accuracy Specifications : We provide Galaxy magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2% Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others We offer Galaxy magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover Technical Specifications: Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C) Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option HP option: 35 psig (2.41 bar), 80 psig (5.52 bar) Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only Temperature Limits: 20 to 140°F.* (-6.67 to 60°C) Size: 4 (101.6 mm) Diameter dial face Mounting Orientation: Diaphragm in vertical position, Consult factory for Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back Weight: 1 lb 2 oz (510 g), MP HP 2 lb 2 oz (963 g) Other position orientations Applications Filter Status Duct Static Pressure Clean Room Pressure Building Pressure Fan and Blower Pressure Paint Booths Dust Collectors Glove Box Pressure Bubbler Systems Cabinet Purging Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Dwyer Usa Magnehelic Gauge Wholesale Noida

Elementor #1847

Oct 12, 2021 by admin 0 Comments

Capsuhelic Differential Pressure Gauge
Rs 5,401/ Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Capsuhelic Differential Pressure Gauge Series 4000 Capsuhelic® Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic® Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Product Applications: Fluid flow Liquid storage tanks Filter pressure drops Vacuum or differential pressure Specifications Service: Aluminum Case: Air and compatible gases and oil based liquids. Brass Case: Air and compatible gases and water based liquids. Wetted Materials:Consult factory. Housing: Die cast aluminum with impregnated hard coating, standard. Optional forged brass housing is required for water or water based fluids. Special material diaphragms available, contact factory. Accuracy: ±3% of FS at 70°F (21.1°C). (±2% on 4000S models, ±4% on 4200, 4210, 4215, 4220, 4300, 4400, and 4500). Pressure Limits:-20″ Hg to 500 psig. (-0.677 bar to 34.4 bar). Temperature Limits:20 to 200°F (-6.67 to 93.3°C) Size:4″ (101.6 mm) diameter dial face. Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations. Process Connections:1/4″ female NPT high and low pressure taps, duplicated – one pair top for air and gas, and one pair bottom for liquids. Weight: 3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case. Standard Accessories:Two 1/4″ NPT plugs for duplicate pressure taps, four flush mounting adapters with screws and four surface mounting screws. Feature:: Gage capsule permits high-pressure usage with small differentials Zero and range adjustments outside of gauge means no disassembly in normal service Time-proven, simple, frictionless movement that permits full scale readings as low as 0.5 in w.c. Diaphragm-actuated versus liquid filled gauge supports outdoor use Options ASF Adjustable Signal Flag B Brass Case Scale Overlays Red, Green, Mirrored or Combination, Specify Locations Additional Information: Pay Mode Terms: T/T (Bank Transfer)

1700 Low Differential Pressure Designed Switch
Rs 12,500 / Piece
Brand	DWYER USA .
Model	1700 .
1700 Low Differential Pressure Designed Switch Series 1700 Differential Pressure Switches were specifically designed to satisfy the demands of high volume original equipment manufacturers for a tough, dependable limit switch at a very low price. The Model 1710 uses Dwyer’s simple, time-proven method of mechanically coupling a sensitive 3″ diameter silicone rubber diaphragm to a versatile SPDT snap switch. The switch housing is precision molded of a high strength glass filled PPO which has excellent dimensional and thermal stability. This unique combination of existing and new technologies enables Dwyer to offer a limit switch priced less than comparable units without sacrificing performance. Installation is fast and simple with twist and tighten mounting screw slots, 14″ quick connect electrical terminals and dual size barbed pressure ports for 18″ and 316″ ID vinyl or rubber tubing. For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz. Product Applications High efficiency furnaces,Duct pressure monitor,Laboratory fume hoods,Monitor air filtercondition Etc Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

EDPS Differential Pressure Switch
Rs 4,000 / Piece
Brand	DWYER USA .
Model	EDPS .
EDPS Differential Pressure Switch The Series ADPSEDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The ADPSEDPS is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. Series EDPS models meet UL508 and are constructed of plenum rated plastics. The compact size, adjustment knob and low cost make the ADPSEDPS the perfect choice for HVAC applications. For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz. Product Applications : Monitoring industrial cooling-air circuits,Monitoring air filters and ventilators,Monitoring flows in ventilation ducts,Frost protection for heat exchanges Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer)

AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch
Rs 12,500/ Piece
Brand	DWYER USA .
Model	AT1ADPS ATEX .
AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch The ATEX approved Series AT1ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 16 in w.c. (4000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing set point status on adjustment knob. Important notes for installation : Cables must be fitted through 1/2″ NPT cable gland or ATEX conduit (not supplied with instrument) Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer)

BDPA Adjustable Differential Pressure Alarm
Rs 12,500/ Piece
Brand	DWYER USA .
Model	BDPA .
BDPA Adjustable Differential Pressure Alarm The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases. The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDCVAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location. The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive. Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

1800 Low Differential Pressure Switch
Rs 25,000/ Piece
Brand	DWYER USA .
Model	1800 .
1800 Low Differential Pressure Switch Essential for industrial environments, the Series 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved. CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES. Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

AT21823 ATEX Approved 1823 Differential Pressure Switch
Rs 12,500/ Piece
Brand	DWYER USA .
Model	AT21823 .
AT21823 ATEX Approved 1823 Differential Pressure Switch Essential for industrial environments, the ATEX approved Series AT21823 combines small size with 2% repeatability. Set point adjustment inside the switch allows for set point settings across 9 ranges from the low of .07 in w.c. to a maximum 85 in w.c. differential pressure. Series AT21823 flame-proof ATEX enclosures are available in aluminum and are ideal for low pressure hazardous area applications. Various housing options such as an overpressure relief valve or external setpoint adjustment knob are available. External setpoint knob allows adjustment without opening the enclosure Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

1900 Compact Low Differential Pressure Switches
Rs 12,500/ Piece
Brand	DWYER USA .
Model	1900 .
1900 Compact Low Differential Pressure Switches Our most popular series combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved. CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES. Product Applications : Clogged filter detection,Air conditioning refrigeration coil icing detection; defrost cycle intiation,Variable air volume controller Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

AT11910 ATEX Approved 1910 Differential Pressure Switch
Rs 25,000/ Piece
Brand	DWYER USA .
Model	AT11910 .
AT11910 ATEX Approved 1910 Differential Pressure Switch Our most popular Differential Pressure Switch is now available in an flame-proof ATEX approved package in the AT11910 Series. This pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. For air and non-combustible compatible gases, the AT11910 Series switches have set points from 0.07 to 20 in w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside the switch enclosure. Series AT11910 ATEX enclosures are available in aluminum enclosures and ideal for low pressure, hazardous area applications. Important notes for installation Cables must be fitted through 12″ NPT cable gland or ATEX conduit (not supplied with instrument). Make sure after cabling to close tight cover and cable gland, in order to keep IP66 rating (IP65 with option OPV, overpressure relief valve). Open cover only after de-energizing instrument. Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

MDA Miniature Adjustable Pressure Switch
Rs 25,000/ Piece
Brand	DWYER USA .
Model	MDA .
MDA Miniature Adjustable Pressure Switch Sense differential pressure with the Series MDA Miniature Adjustable Pressure Switch. The switch features field adjustable set point and gold inlay contacts. Air or other compatible fluids can be used on the “high side”. The lightweight and compact size make the MDA ideal for any application with space constraints. Applications include industrial, HVAC, pump and motor control, medical, automotive, pools and spas. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Mark II Molded Plastic Manometer
Rs 12,500 / Piece
Brand	DWYER USA .
Measuring Range	0-1” .
Model	Mark II .
Mark II Molded Plastic Manometer Dwyer® Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

424 Durablock Inclined Manometer
Rs 9,500 / Piece
Brand	DWYER USA .
Model	Dwyer No 424 .
424 Durablock Inclined Manometer Dwyer® No. 424 inclined-vertical manometer are extremely accurate instruments designed and made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20″ to provide ample multiplication of indicating fluid movement in this critical lower part of the range. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

1235 Flex-Tube Well Manometer
Rs 8,500/ Piece
Brand	DWYER USA .
Model	1235 .
1235 Flex-Tube Well Manometer Dwyer Flex-Tube® Well Type Manometers are designed to meet the need for a direct reading single column instrument providing highly accurate pressure readings; positive, negative or differential. Unlike other makes, Dwyer manometers have no hidden wells or packing glands. These instruments are constructed of shatter-proof clear plastic tubing permanently bonded to well assemblies with leak-proof glued joints. Well assemblies are precisely machined from solid acrylic plastic. Overpressure safety traps assure protection against loss of fluid. Heavy pure white acrylic plastic scales have sharp black silk screened figures and graduations sealed with clear mylar coating. Scales are adjusted with quick-acting positive mechanism. Heavy heat treated aluminum back plates have durable gray hammerloid finish. These manometers are rated to 100 psig (6.89 bar). Not recommended for vacuum service beyond 5″ Hg (68″ w.c.). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 616KD Differential Pressure Transmitter
Rs 12,500 / Piece
Brand	DWYER USA .
Model	Series 616KD .
Series 616KD Differential Pressure Transmitter The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration. Mounting is simple with integral mounting holes on the 616KD that are inherent to the molded housing. The 616KD has the expanded capability to be mounted on a 35 mm DIN rail either via its side or back integral DIN rail clips. The Series 616KD has easy-to-wire open screw terminals at the top of the housing. An optional protective cap snaps directly to housing to cover terminals. The One-Touch® family of Differential Pressure Transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume and filter monitoring. Available models include ranges from 1 in w.c. to 20 in w.c. depending on series. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Model DTG Digital Tire Pressure Gage
Rs 25,000/ Piece
Brand	DWYER USA .
Measuring Range	Model DTG-01 .
Model	Model DTG-01 .
Model DTG Digital Tire Pressure Gage The Model DTG-01 Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. With ±1% FS accuracy, the DTG reads psi, bar and kPa with the ease of one-button operation. A protective rubber casing stands up against rough handling and short drops. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 628CR Pressure Transmitter
Rs 12,500 / Piece
Brand	DWYER USA .
Model	Series 628CR .
Series 628CR Pressure Transmitter Accurate to ±1% of full scale, The Series 628CR Pressure Transmitter, contains a low cost ceramic sensor housed in a compact, rugged, NEMA 4X stainless steel body. Ideal for the budget conscious OEM’s that require high levels of performance, reliability and stability at an unbeatable price. The 628CR housing is small and lightweight for optimum compatibility with OEM systems. The design allows for a variety of pressure ranges from 30 to 500 psi and optional electrical connections allowing you to select the right transmitter for your application. Product Applications : Pump Monitoring,Compressors,Irrigation Equipment,HVAC,Pneumatic Systems Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 626 & 628 Industrial Pressure Transmitter
Rs 9,500/ Piece
Brand	DWYER USA .
Model	Series 626 & 628 .
Series 626 & 628 Industrial Pressure Transmitter The Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing. The Dwyer Series 628 Pressure Transmitters are ideal for OEM’s with 1% full scale accuracy sensors. The transmitter is also available in the general purpose stainless steel housing and the cast aluminum conduit housing. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application. Product Applications : CompressorsPumping Systems,Irrigation System Pressure Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 673 Pressure Transmitter
Rs 12,500 / Piece
Brand	DWYER USA .
Model	Series 673 .
Series 673 Pressure Transmitter The low cost Series 673 Pressure Transmitter is a fixed range transmitter designed for harsh environments and suitable for high shock and vibration applications. Constructed of stainless steel, the Series 673 provides a 4 to 20 mA output signal with 0.25% accuracy. Use the Series 673 in industrial OEM equipment, hydraulic systems, HVAC equipment, industrial engines and compressor control. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Magnehelic Gauge SS Plate Front Cover
Rs 350 / Piece
Brand	Integerated Engineers India .
Material	Steel .
Connection	New .
Magnehelic Gauge SS Plate Front Cover We are here to offer Magnehelic Gauge SS Plate Front Cover. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients. Specifications: Metal of construction S.S. 304 Dial size: 4″ Ranges: mm/wc,In/wc, Pascal Enclosure type: consul type & wall mounting Front panel: zero calibration gas selector switch optional Available in different specifications ranging from: 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , And 0- 60 pA, 0-250 pA. Uses: Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series TPT Industrial Pressure Transmitter

Brand	DWYER USA .
Model	Series TPT .
Series TPT Industrial Pressure Transmitter The Series TPT Pressure Transmitter is the ideal choice for all types of industrial pressure applications. Machined from a solid piece of 17-4PH SS, the TPT provides a leak proof, all metal system without O-rings, welds, or organics exposed to the pressure media. Its design allows for stable operation when subject to shock and vibration. Utilizing piezoresistive technology with digital compensation and temperature correction, the TPT gives high accuracy and stability under harsh environmental conditions. Available in ratiometric and 4 to 20 mA outputs. Product Applications : Process automation and control, Test and measurement equipment Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 682 Industrial Pressure Transmitter

Brand	DWYER USA .
Model	Series 682 .
Series 682 Industrial Pressure Transmitter The Series 682 Industrial Pressure Transmitter is designed to withstand environmental effects such as shock, vibration, temperature, and EMIRFI. The electronics and capacitive sensor are packaged in a welded stainless steel housing and meets NEMA 4 (IP65) protection ratings. The transmitter features external zero and span adjustments and reverse polarity protection. The Series 682 delivers high performance in tough applications such as off road equipment, hydraulic systems, compressor control, industrial engines, or industrial refrigeration. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 672 Low Pressure Transducer

Application	Panel Meter, PLC, Switches, Pumps .
Series 672 Low Pressure Transducer The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10″ w.c. up to 400″ w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 634ES Adjustable Range Pressure Transmitter

Brand	DWYER USA .
Model	Series 634ES .
Series 634ES Adjustable Range Pressure Transmitter Series 634ES Transmitters sense a single pressure for air, compatible gas or liquid and provide 4-20 mA output signal. Positive pressure can be measured within an accuracy of ±0.5% of span. The Series 634ES uses an isolated piezoresistive pressure sensor to produce a resistance change across a wheatstone bridge. Convenient 2-wire operation simplifies installation. Zero and span adjustments are fully protected inside a rugged die cast aluminum housing with durable gray polyurethane finish. Enclosure is designed to meet NEMA 4X requirements. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 681 Sanitary Pressure Transmitter

Brand	DWYER USA .
Model	Series 681 .
Series 681 Sanitary Pressure Transmitter The Series 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure wash-down in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The Series 681 is designed with a unique, no liquid fill diaphragm and a Sanitary Clamp pressure fitting for easy installation with negligible clamping effect. A conduit fitting, shielded cable with vent tube and sealed screws for zero and span adjustment combine to make the Series 681 completely watertight. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series BYDS Bypass Damper Switch

Brand	DWYER USA .
Model	BYDS .
Series BYDS Bypass Damper Switch The Series BYDS Bypass Damper Switch is designed to control motorized bypass dampers. As individual zone dampers open and close, the system static pressure will rise and fall. In order to maintain proper airflow and static pressure through the HVAC system, a bypass system incorporating a floating type motorized damper and a static pressure control should be incorporated. A typical onoff pressure switch cannot operate in this application due to the high cycle rate that would result, eventually causing contact burnout. The BYDS static pressure control is equipped with a solid-state switching and timing circuit to enhance operation and improve long-term reliability in this demanding application. CONTROL OPERATION The BYDS Bypass Damper Switch is designed for use with a three wire floating point damper actuator used to control the static pressure on zone control systems requiring motorized bypass dampers. A bypass damper, bypasses air from the discharge air side of the HVAC unit back in the return air side. The air flow is modulated in order to maintain a constant static pressure in the system as individual zone dampers open and close. The static pressure control is equipped with solid-state switching which dramatically increases the life of the control. On an increase in static pressure the BYDS will send 24 volts out and start the actuator to drive open. When the static pressure reaches set-point the actuator will stop. After a ten second delay the actuator will start to drive the damper closed if there has not been an increase in static pressure. A green LED indicates when the damper is in the open position or being driven open. A 24 VAC transformer is required to power the BYDS control and damper actuator. The unit includes tubing and two static pressure probes Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

TRI2 Tridicator Gage
Rs 25,000/ Piece
Brand	DWYER USA .
Model	Series TRI2 .
TRI2 Tridicator Gage The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

SGP Stainless Steel Low Pressure Schaeffer Gage
Rs 10,780/ Piece
Brand	DWYER USA .
Model	Series SGP .
SGP Stainless Steel Low Pressure Schaeffer Gage The Series SGP Gages have dual Englishmetric scales with Â±1.6% full scale accuracy. The Series SGP gages are designed with 304 SS housings, a 316L SS chamber and a 316 SS diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149Â°F (65Â°C) and process temperatures up to 248Â°F (120Â°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available. Applications : Chemical,Fertilizer,PowerPharmaceutical,Petrochemical Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

SGO Stainless Steel Schaeffer Gage
Rs 12,500/ Piece
Brand	DWYER USA .
Model	Series SGO .
SGO Stainless Steel Schaeffer Gage The Series SGO Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGO gages are designed with 304 SS housing, a 316L SS chamber and PTFE coated diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 248°F (120°C). Ranges are available from full vacuum, compound to 300 psi. Product Applications: : Chemical,Refinery,Fertilizer Petrochemical, Power Pharmaceutical Pulp and PaperCement. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

SGF Stainless Steel Low Pressure Gage
Rs 4,000 / Piece
Brand	DWYER USA .
Model	Series SGX SGF .
SGF Stainless Steel Low Pressure Gage The Series SGXSGF Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGXSGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 212°F (100°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle. Product Applications : Pneumatic,Draft Measurement,Filter Monitoring,Liquid Level Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series WDG Weatherproof Digital Pressure Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Measuring Range(mm)	4-digit backlit display .
Model No.	Series WDG .
Series WDG Weatherproof Digital Pressure Gage The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DPGA & DPGW Digital Pressure Gauge
Rs 12,500/ Piece
Brand	DWYER USA .
Measuring Range(mm)	0-50 MM WC .
Model No.	Series DPGA .
Series DPGA & DPGW Digital Pressure Gauge The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases. The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases. Product Applications : Ideal for checking process pressure at system startup Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DPGAB Digital Pressure Gauge
Rs 28,562/ Piece
Brand	DWYER USA .
Measuring Range(mm)	Range 0 to 200 psig .
Model No.	Series DPGWBDPGAB .
Series DPGAB Digital Pressure Gauge The Series DPGWB DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The DPGWB stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGWBDPGAB come with a protective rubber boot to protect against short drops and rough handling. Product Applications : Ideal for checking line pressures at system startup Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DPG Digital Pressure Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Model	Series DPG .
Series DPG Digital Pressure Gage Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The Series DPG has a high ±0.25% or ±0.5% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DCGII Digital Calibration Pressure Gage
Rs 25,000 / Piece
DWYER USA	Series DCGII .
Series DCGII Digital Calibration Pressure Gage The Series DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5,000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability. Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Model HTG Handheld Digital Tire Pressure Gage
Rs 35,000 / Piece
Brand	DWYER USA .
Model	Model HTG-01 .
Model HTG Handheld Digital Tire Pressure Gage The Model HTG-01 Handheld Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. Its lightweight, handheld design makes it portable and user friendly with its one button operation. A backlit 14″ LCD display and illuminated tip ensures easy visibility in low light. The Series HTG also displays three different units of psi, bar and kPa with the push of a button. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DSGT Digital Indicating Transmitter
Rs 35,000 / Piece
Brand	DWYER USA .
Model	Series DSGT .
Series DSGT Digital Indicating Transmitter Series DSGT Digital Indicating Transmitter is a versatile multi-function process gage that features an excellent 0.25% full scale accuracy. This all-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches. The Series DSGT gage comes standards with a loop-powered 4-20 mA transmitter output and is offered with one or two optional SPDT switches. The Series DSGT gage is housed in a durable fiberglass reinforced thermoplastic case that is designed to meet NEMA 4 (IP65) requirements. The gage features a menu-driven display for easy customization. User selectable features include 12 engineering units of measure, password protected calibration and disable functions, as well as an adjustable bar graph and update dampening rates. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

250-AF Inclined Manometer Air Filter Gage

Brand	DWYER USA .
Connection	New .
Condition	New .
250-AF Inclined Manometer Air Filter Gage Dwyer® Durablock® Series 250-AF Gages are precision machined 1″ thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002″ to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by “O” rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions. Economy Models 451-AF and 452-AF are similar to 250 Series except they are not equipped with over pressure traps. Two A-324 14″ compression fittings are included with each Gage. Bodies are of 58″ thick acrylic and scales are mirror polished, epoxy coated aluminum. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

300 Durablock Solid Plastic Stationary Gage
Rs 9,000/ Piece
Brand	dwyer usa .
300 Durablock Solid Plastic Stationary Gage Dwyer® solid plastic stationary gages – or draft gages – are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrications of acrylic instruments. Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series UGI Utility Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Model	DWYER USA .
Series UGI Utility Gage 1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series UGJ Utility Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Model	DWYER USA .
Series UGJ Utility Gage The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series SG5 Contractor Gage
Rs 4,000 / Piece
Brand	DWYER USA .
Model	Series SG5 .
Series SG5 Contractor Gage The Series SG5 Contractor Gages are ideally manufactured for contractors because of their large dial and compact design. Since the gages are lightweight and slim, they are easy to transport. The large 4.5″ scale makes them simple to read. The Series SG5 gages possess psi scales with 1% full-scale accuracy. The gages are made with a stainless steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140°F (-20 to 60°C). These qualities make the SG5 series perfect for contractors and industrial applications. A wide offering of ranges are available from full vacuum to 300 psi. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Dwyer USA Digital Pressure Gauge Wholesaler

Elementor #1829

Oct 11, 2021 by admin 0 Comments

Dwyer Digital Differential Pressure Gauge
Rs 18,500 / Piece
Brand	DWYER USA .
Dwyer Digital Differential Pressure Gauge Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Specifications: Measuring Range: Medium-pressure Gauge Accuracy: 0.5 Application: Industrial Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Dwyer Products INDIA DELHI

Elementor #1717

Oct 11, 2021 by admin 0 Comments

Model 480 Vaneometer Swing Vane Anemometer
Rs 7,500 / Piece
Model 480 Vaneometer Swing Vane Anemometer The 480 Vaneometer™ Swing Vane Anemometer is a durable low-priced instrument specifically designed to simplify the measurement of low air velocities from 25 to 400 feet per minute. OSHA, EPA and other safety ventilation requirements for spray booths and at fume, smoke and dust exhaust hoods can now be quickly checked, even by untrained personnel. Its small size and light weight – only four ounces make it ideal to carry from one work station to another. A versatile steel mounting bracket for continuous monitoring is also included. The Vaneometer™ Swing Vane Anemometer is accurate to ±5% of full scale to 100 FPM and ±10% from 100 FPM to top of scale. It has a spirit level to ensure accurate readings and the large scales are easy to read and visible from both sides. The housing is molded from tough ABS plastic and easy to clean with soap and water. The polyester vane can be cleaned with lacquer thinner. A spare vane is provided. Use a Vaneometer™ Swing Vane Anemometer to measure velocity of air flow into laboratory fume hoods and at paint spray booths to determine when to change filters. Or wherever needed to meet OSHA standards of ventilation for smoke, dust or fume removal. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: delhi Production Capacity: 8368801023

Series 477 Handheld Digital Manometer

Measuring Range	0 to 20 inch WC
Connection	3/16 inch ID Tubing
Brand	Dwyer
Power Supply	9 V battery

Series 477 Handheld Digital Manometer Series 477 Handheld Digital Manometers are packed with features you need to make low pressure measurement and recording faster, easier and more accurate than ever. First, you can instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. Next, a non-volatile memory function enables storage of up to 40 readings – perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct. The Series 477 is FM approved intrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4. When working in poorly lighted areas, just switch on the handy backlight feature. It automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. We even included an audible alarm to warn you of overpressure plus a visual alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.

Product Applications : Field calibration.,Clean room checks,Air velocity monitoring with Dwyer Pitot tube. etc.

SPECIFICATIONS Service: Air and non-combustible compatible gases. Accuracy: ±0.10% of full-scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scalefrom 32 to 60 and 78 to 104°F (0-15.6 and 25.6-40°C). Pressure Hysteresis: ±0.1% of full-scale. Pressure Limits: See chart. Temperature Limits: 32 to 140°F (0 to 60°C). Storage Temperature Limits: -4 to 176°F (-20 to 80°C). Display: 0.42?? (10.6 mm) 4 digit LCD. Resolution: See chart. Power Requirements: 9 V alkaline battery, installed non-functional, userreplaceable. Weight: 10.2 oz. (289 g). Process Connections: Two barbed connections for use with 1/8?? (3.18 mm) or3/16?? (4.76 mm) ID tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only.Two compression fittings for use with 1/8?? (3.18 mm) ID x 1/4?? (6.35 mm) ODtubing for 477A-6 and 477A-7 only.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

475 Mark III Handheld Digital Manometer

Brand	DWYER USA
Model	475 Mark III

475 Mark III Handheld Digital Manometer The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1″ w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gage. The Series 475-FM Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meet the most demanding applications and to provide stability of instrument reading, the 1″ w.c. range is compensated for position sensitivity through use of a unique dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front panel control on-off, auto zero, and pressure unit selection. No setup or leveling. The large 0.42″ LCD display is easy to read, minimizing data collection errors. Units include a “low battery” indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 18″ or 316″ I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

HM35 Precision Digital Pressure Manometer

Brand	DWYER USA
Model	HM35
Application	Industrial, Laboratory

HM35 Precision Digital Pressure Manometer The High Precision Series HM35 Digital Manometer is designed to reliably measure and log pressure measurements for critical applications. This family of manometer can measure absolute pressure, differential pressure or gauge pressure with up to 0.05% accuracy. The data logging function can store up to 10,742 readings and transmit the readings to a PC through an IR serial port. The large display can graphically display trends in the data as well as peaks and valleys. The series HM35 comes standard with a calibration certificate so that the instrument can be used as a secondary calibration standard when testing other pressure instrumentation. This manometer is ideal for laboratories, calibration facilities, and other critical pressure applications.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

HM28 Handheld Digital Manometer

Brand	DWYER USA
Model	HM28
Application	Industrial, Laboratory

HM28 Handheld Digital Manometer The Series HM28 Digital Hand-Held Manometer is a precision instrument designed to measure a wide range of pressures to a very high accuracy. The unit incorporates a variety of features in an easy to use format that makes it useful in a wide variety of applications. Features include: measurement in all common pressure ranges, display resolution to 0.001, differential or relative measurement, two line liquid crystal display, and adjustable auto power off to conserve battery. We are so proud of the accuracy of the HM28 that we provide a certificate of calibration with the unit at no additional cost. Depending on your application, the HM28 can be used as a secondary calibration standard for your other pressure instrumentation.Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

490 Wet Handheld Digital Manometer

Brand	DWYER USA
Model	490
Application	Industrial, Laboratory

490 Wet Handheld Digital Manometer Series 490 Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings for later recall and a backlight provides auxiliary lighting for hard-to-see locations. Standard are a hold feature and both visual and audible overpressure alarms. A new feature added to the Series 490 is a field adjustable damping. This allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications. A 9V alkaline battery is included that provides up to 100 hours of operation.

Product Applications : Balance hydronic heating or cooling water loops,Check pump or chiller performance,Determine pressure head loss from valves and pipe reduction.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

1223 Flex-Tube U-Tube Manometer

Brand	DWYER USA
Model	1223

1223 Flex-Tube U-Tube Manometer These inexpensive manometers measure positive, negative and differential pressures. Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple “U” Tube with the durability of tough, long-lasting plastic construction. Columns are of .375″ O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility. You can choose from numerous models and features including over-pressure safety traps, in full scale ranges from 8″ to 36″ of water or mercury. All are suitable for total pressures to 100 psi – for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manometer is needed. Standard ranges and markings as shown, or special ranges, colors, logos and brand names for OEM quantity orders are available.Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

1212 Gas Pressure Kit Slack Tube Manometer

Brand	DWYER USA
Model	1212

1212 Gas Pressure Kit Slack Tube Manometer 1211 Handy Roll-Up Manometer with Laboratory Accuracy Dwyer® Slack Tube® Manometers are as accurate as the finest laboratory “U” gages – yet they are made to roll up compactly for easy carrying and to withstand rough usage. Simply unroll the Dwyer® Slack Tube® Manometer and set up to read static pressure, vacuum, or differential pressure. Magnetic clips hold it firmly to any steel surface or hang it on a nail. Turn connectors one revolution to open. When the pressure is imposed, add the number of inches one column travels up to the number of inches the other column travels down. When reading is completed turn connectors to seal columns, roll up manometer into compact coil and tuck it away in its plastic case or a tool box. No fluid lost. No loose caps or inserts to lose. Dwyer® Slack Tube® Manometers cover a wide range of pressure readings from 4-0-4 inches up to 60-0-60 inches. Use them in determining velocity and static pressures, for leakage, fan and blower tests, calibrating control devices, checking gas pressure and many other applications. All models have flexible vinyl-plastic columns and flexible spring steel scale calibrated in inches of water using water; and inches of mercury using mercury. Scale is center-mounted between columns to eliminate parallax error and has a full 2″ sliding zero adjustment. All Dwyer® Slack Tube® Manometers feature exclusive molded nylon tubing connector assemblies with rapid shutoff design in an acrylic plastic top. One turn counter clockwise and the instrument is ready for use. Another turn seals the tubes completely. Molded all-nylon construction makes this assembly corrosion-proof, leak-proof and practically unbreakable. Tubing connectors extend horizontally allowing 360° freedom. Tubes won’t bend or pinch off. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

Brand

DWYER USA

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

1227 as a regular U-tube manometer to read high-range pressure on the right leg, or as an inclined manometer to read low-range pressure on the bottom leg. Simply incline manometer until fluid levels read zero. No spirit level required. Magnetic clips hold the gage in position on a steel duct surface.

Most versatile and useful low cost manometer we know of. Designed for installation and servicemen. A sturdy, clear plastic manometer, it offers single, direct readings in two ranges: As a U-tube, it reads from 0 to 16″ of water; as an inclined gage, it reads from -.20 to 0 to 2.6″ of water. Model 1227M (Metric) is 0 to 400 mm water column as a U-tube and -5 to 0 to 70 mm water column as an inclined gage. “How-to-use” instructions are printed directly on the scale.
Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series 1213 Gas Pressure Manometer

Brand	DWYER USA
Model	Series 1213

Series 1213 Gas Pressure Manometer
Provide visual indication of pressure with the Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 18″ nylon male NPT to barb fitting. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model THI-10 Digital Thermohygrometer

Brand

DWYER USA

Model THI-10 Digital Thermohygrometer The Model THI-10 Digital Thermohygrometer accurately measures relative humidity and ambient temperature. Up to 99 readings can be stored in non-volatile memory allowing the HVAC technician to record the data after returning to the office. This compact thermohygrometer also features user selectable engineering units, MaximumMinimum functions, dew point and wet bulb temperature measurements. The Model THI-10 includes a soft carrying case with a belt loop for easy transportation. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model ANE-1 Differential Pressure Anemometer

Brand	DWYER USA
Model	Model MW-1
Usage	Industrial, Laboratory

Model MW-1 Pocket Wind Meter Measure wind speed and temperature with the Model MW-1 Pocket Wind Meter. Easily view readings on the four digit 2″ (51 mm) high LCD display with wind speed bar graph. Selectable air velocity ranges include ms, ftmin, kmh, mph, and knots. Ambient temperature recorded in °F or °C. The MW also features automatic shut-off, detailed instruction manual and protective plastic water resistant housing that floats. Accessories include a lanyard.Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model 9671 Multifunction Vane Thermo-Anemometer

Model 9671 Multifunction Vane Thermo-Anemometer

Measure air velocity, air volume, temperature, humidity, and BTU with the Model 9671 Multifunction Anemometer. The large 1.8″ (45 mm) display allows users to easily view readings. User-selectable wind speed units include ftmin, ms, knots, mph and kmhr. In addition to these functions, the 9671 is capable of measuring relative humidity, wet bulb temperature, dew point and BTU capacity. A built-in sensor records ambient temperature in °F or °C. Model 9671 features include data hold, along with the ability to record minimum, maximum and average readings on a single point. Additional features include an RS-232 interface setting that allows the unit to download data, as well as upload up to 99 measurements through pre-edited PC files. The 9671 also has a detachable probe for easy replacement, if necessary, or to attach a miniature vane probe. Each unit includes hard carrying case, batteries, software CD, cable and instruction manual.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model MW-1 Pocket Wind Meter

Application	Hospital
Portable	Yes
Model	Model ANE-1

Model ANE-1 Differential Pressure Anemometer The Model ANE-1 Differential Pressure Anemometer is a robust and durable bidirectional anemometer with no moving parts or sensing electronics. With the installed tubing, the ANE-1 connects easily to any manometer or applicable pressure sensing device and is capable of measuring a wide velocity range. The air velocity range and accuracy is dependent on the installed manometer, and the ANE-1 retains the accuracy as long as it is dust free. The ANE-1 is made from high quality ABS plastic, comes with a convenient handle, and includes 5” of blue and 5” of red silicone tubing (2 mm ID x 4.5 mm OD) with removeable adapter sized 2 mm OD to 316″ OD that has two removeable 5″ clear silicone 316″ ID x 38″ OD tubing versatile process options.

Product Applications : Differential Pressure

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Air Velocity Meter

Model 475-1-FM-AV Air Velocity Kit Convenient all-in-one kit is small, light and easy to use. No set-up or leveling needed. Digital manometer reads from 0-20.00″ w.c. with ±0.5% F.S. accuracy and minor divisions to 0.01. Large 12″ LCD readout is easy to see in poorly lighted areas and has “low battery” warning. Included is a 6″ stainless steel Pitot tube with integral compression fitting to hold it securely when taking readings. Also, two static pressure tips with magnetic mounting measure pressure drop across filters, condenser coils, etc. Kit comes complete with rubber tubing, 9V battery, step drill, AV calculator slide rule, and custom fitted carrying case. An indispensable test kit for the plant engineer, industrial hygienist and HVAC technician. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

400 Air Velocity Meter
ir pressure – from 0 to 10	feet per minute of velocity – from 400 to 10,000 fpm .
400 Air Velocity Meter Measure both pressure and air velocity Read the red figures directly in feet per minute of velocity – from 400 to 10,000 fpm No conversion tables needed for air at standard conditions. Read the black figures in inches of water column air pressure – from 0 to 10″ w.c. Our most popular precision air velocity instrument, the No. 400 is used to balance air conditioning systems, measure pressure drop across filters, and test fan and blower discharge and inlet pressures, as well as air velocity in ducts. It offers the convenience of a dual purpose instrument – plus high accuracy on easy-to-read scales. The Series 400 includes “leveling” adjustment and glass bubble level, which makes it a versatile, all around manometer for the air conditioning and balancing contractor or industrial plant. Kit includes No. 400 Air Meter and all accessories: Combination InclinedVertical Manometer. Dwyer® Durablock® precision machined solid acrylic plastic construction is virtually indestructible. Has both inclined section for high accuracy and vertical section for extended range. Pressure marked in black, Velocity in red figures. Easy to read – no reference tables needed. Has screw leveling adjustment and ground glass bubble level Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model EMMA Digital Multifunction Environmental Meter
Model EMMA	Model EMMA .
Model EMMA Digital Multifunction Environmental Meter Monitoring the environmental conditions is more convenient with the Model EMMA multifunction meter. Humidity, temperature, air velocity, air flow, sound and light measurements are combined in one easy to use instrument. The large, dual-line 4-digit LCD display shows both the current and average reading. For reading measurements in dimly lit areas, the display has a built-in back light. Besides measuring the current and average reading, the Model EMMA allows the user to read the minimum, maximum and differential measurement for each of the parameters. Included with the meter is the carrying case, rubber boot, battery and tri-pod. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

160S Stainless Steel Pitot Tube
Rs 10,029 / Piece
Brand	DWYER USA .
Model	160S .
Application	Industrial, Laboratory .
160S Stainless Steel Pitot Tube Series 160S Pitot Tubes are designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in smoke stack and other environmental testing. Large 516″ dia. stainless steel tubing resists plugging under harsh, sooty conditions which quickly block conventional flow sensors. Total and static pressure tubes are precisely aligned and welded together every six inches for maximum accuracy, strength and long term durability. Versatile 18″ female NPT connections easily adapt to any type of pipe or tubing. A pair of 18″ NPT to 316″ I.D. tubing adapters is included plus a handy molded vinyl cap to protect tip when not in use. Supplied with complete instructions.Permanent Mounting (PM) models include 1 inch dia. welded stainless steel sleeve and adjustable compression fitting with 1 inch male NPT mounting threads. Adjust depth, lock in place Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Series 166T Telescoping Stainless Steel Pitot Tube
Rs 10,029 / Piece
Brand	DWYER USA .
Model	Series 166T .
Application	Industrial, Laboratory .
Series 166T Telescoping Stainless Steel Pitot Tube The Model 166T Telescoping Pitot tube is a unique air flow sensor which can quickly and easily be adjusted for any duct insertion length from 11.5 to 36 inches (29.2 to 91.4 cm). Now, this single compact unit can replace up to five conventional fixed length Pitot tubes. For even greater convenience, it is securely protected by a custom fitted polyethylene carrying case. Telescoping sections lock in place as they are extended, enabling use of the handle grip to gauge proper alignment of the tip within the airstream. Stainless steel construction resists corrosion. Hemispherical tip has 1.0 flow coefficient, is 18″ dia. (3.2 mm). Largest section is 38″ (9.5 mm). Weight (with case) 1 lb, 9 oz (709 g). Case: 12.5 x 6.25 x 1.75 in. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model 160G Averaging Air Flow Grid
Rs 10,029 / Piece
Brand	DWYER USA .
Model 160G Averaging Air Flow Grid The Model 160G Averaging Air Flow Grid is a precision sensing instrument used to measure face air velocity on grills, diffusers, registers, exhaust hoods, coils, filters, dampers and similar restrictions. With its 16 sensing points, the 160G Air Flow Grid provides an average flow sensing area across its 16.5″ length and width. Included color coded tubing connects to the integral barbed fittings, providing a differential pressure signal to a gage or manometer where the readings can be converted into a velocity or flow reading. The 160G comes standard with an 18″ handle and two 17″ extensions offering a maximum reach of approximately 52″. The uniquely designed swivel and tightening nut allows the user to position the sensing grid at any angle for ease of use in hard to reach locations. Store in the separate UHH-C2 hard carrying case with foam cut-outs perfectly sized for the 160G, as well as various other instruments in the AQTI Air Quality Test Instruments line. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model TH2-10 Thermo-Hygrometer Pen

The Model TH2-10 Thermo-Hygrometer Pen is a compact handheld device that measures temperature, humidity, dew point, wet bulb, and heat index for heat stroke prevention. The TH2-10 has many applications including HVAC, home inspection for examining heating or cooling conditions, outdoor weather monitoring to avoid heat stroke, and construction or industrial inspection. This product offers fahrenheit and celsius units, data hold function, and 0.1°F°C resolution. Batteries are included.

Product Applications : Home Inspection (for examining heating or cooling conditions,HVAC,Construction or Industrial Inspection Etc.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

Model 485B Thermo-Hygrometer

Model 485B

Model 485B Thermo-Hygrometer

Model 485B Digital Thermo-Hygrometer is a versatile, compact, hand-held instrument for measuring percentage of relative humidity and temperature in °F or °C. Dew point and wet bulb temperature is derived from relative humidity and temperature measurements and displayed on the LCD. Hold key freezes the current temperature and relative humdity readings for situations where readings fluctuate. Store up to 99 readings with the nonvolatile memory function – ideal for technicians needing to take multiple readings for later analysis.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

1205B Handheld CO2 Gas Analyzer
Brand	DWYER USA .
Model	205B Handheld CO2 .
Application	Industrial, Laboratory .
1205B Handheld CO2 Gas Analyzer The Model 1205B Gas Analyzer accurately measures the concentration of carbon monoxide (CO) and carbon dioxide (CO2) in a duct or space. The Gas Analyzer displays the measurement on a two line digital LCD display with backlight. The unit’s memory stores up to 255 sets of readings that are logged manually or auto-logged with 1 to 10 minute intervals. Besides measurement recording, Model 1205B can provide a summary of average and maximum levels reached during recording. Results then can be printed via an optional infrared printer. Model 1205B includes batteries, 120V power supply, protective rubber boot with integral magnet, sampling probe, and a canvas carrying case. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model 450A-1 Digital Pocket Size Carbon Monoxide Meter

Application

Industrial, Household

Model 450A-1 Digital Pocket Size Carbon Monoxide Meter

The Model 450A-1 Digital Pocket Size Carbon Monoxide Meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in backlight brightens the display. Model 450A includes soft carrying case with belt loop, wrist strap, and batteries.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

Model 8901 Vane Thermo-Anemometer

Model 8901 Vane Thermo-Anemometer is ideal for balancing air conditioning and heating ducts or checking the operation of fans and blowers. Model 8901 measures air volume in cubic feet per minute and cubic centimeters per second, as well as air velocity in ftmin, ms, knots, kmhr and mph with ±2% accuracy. The multifunction LCD can simultaneously display air velocity and temperature or air flow and temperature in selectable units. Built-in temperature sensor provides measurements with an accuracy of ±2 with the capability to display the results in °F°C. Model 8901 can either store measurements or transfer the data to a PC via RS-232 communication. Additional features include data hold, as well as the ability to record minimum, maximum and average readings. These units also feature a detachable probe for easy replacement, if necessary. Model 8901 includes battery, carrying case and instruction manual.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

UHH Universal Handheld Test Instrument
Brand	DWYER USA .
Low Battery Indication	Yes .
Type of Tachometer	Analog Tachometer, Digital Tachometer, Contact Tachometer, Non Contact Tachometer .
UHH Universal Handheld Test Instrument The Model UHH Universal Handheld Test Instrument is a highly versatile instrument that offers the utmost flexibility and ease of user operation by having the capacity to work with a variety of Dwyer Instruments, Inc. compatible sensing modules and probes. Additional wired and wireless probes or modules are instantly recognized by the UHH without any user reprogramming or alteration, allowing seemless sensor addition, upgrade or replacement. See the AQTI and AQTIP Series in the Dwyer Instruments, Inc. catalog or website www.dwyer-inst.com for available packages and sensors. The Universal Handheld offers a slew of features that enable a technician to quickly set up and intuitively navigate through their daily activities. Data is stored via the internal memory or separate SD card in various auto or manual logging operations. Logged files can be quickly transferred to a device through a USB cable or by a portable SD card. The display can operate in standard numerical meter mode, gage mode with analog needle, gage mode with additional passfail operation zones, and strip chart mode which enables a simplified visual tracking of the process. The four directional buttons, combined with the three soft key buttons aligning to corresponding screen functions, allow for quick navigation through the four main operation menus. The rugged plastic case with protective thermo-plastic over-mold, along with the dust-shielding rubber caps, permit the unit to handle abuse and properly withstand dusty environments. The base UHH includes an integral molded compartment that securely holds wireless modules. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model MST2-01 Digital Moisture Meter
Brand	DWYER USA .
Warranty	1 Year .
Model MST2-01 Digital Moisture Meter The Model MST2-01 Digital Moisture Meter is a high-accuracy instrument used for determining the moisture content in wood, gypsum, bamboo, paper and other various materials. This unit also has the ability to measure ambient temperature and relative humidity. The large digital LCD makes measurements easy to read, while the hold function makes them easy to record. The MST2-01 includes a protective cap, two replacement pins, and one battery. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Series 160 Stainless Steel Pitot Tube
Brand	DWYER USA .
Model	Series 160 .
Application	Laboratory, Industrial .
Series 160 Stainless Steel Pitot Tube Ideal for use with our precision manometers and air velocity gauges, Dwyer® Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 34″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations. Product Applications : Monitor or control static or differential pressure when combined with differential pressure gage, switch or transmitter. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model 1207A Handheld Flue Gas Combustion Analyzer
Brand	DWYER USA .
Model	Model 1207A .
Application	Industrial Use, Laboratory Use .
Model 1207A Handheld Flue Gas Combustion Analyzer The Versatile Model 1207A Handheld Flue Gas Combustion Analyzer makes adjusting boilers for optimum efficiency quicker and easier. With the large LCD display, users can monitor four parameters simultaneously and change the parameters shown using the rotary dial selection switch. For extra protection, the analyzer comes standard with a protective boot and magnetic back. In order to track the measurements, the 1207A can store up to 255 time stamped test sets in memory and can output measurements to a serial printer. The 1207A comes preprogrammed for Natural Gas, Light Oil, Propane, Butane, LPG, and Wood Pellets. Along with analyzing combustion measurements, the analyzer can be used as a COCO2 indicator, pressure manometer, or thermocouple thermometer. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model AQH-20 Handheld Indoor Air Quality Meter
Model AQH-20	Model AQH-20 .
Model AQH-20 Handheld Indoor Air Quality Meter The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Series MST-01 Digital Moisture Meter
Brand	DWYER USA .
Material	Series MST-01 .
Series MST-01 Digital Moisture Meter The Series MST-01 Digital Moisture Meter is a high accuracy instrument used for determining the moisture content in wood, gypsum, bamboo, paper and other various materials. This unit features a durable and rugged enclosure which ensures a long life span. The large digital LCD makes measurements easy to read, while the hold function makes them easy to record. The MST-01 includes a nylon carrying case, protective cap, two replacement pins and one battery. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model 471B Thermo-Anemometer Test Instrument
Model 471B	Model 471B .
Model 471B Thermo-Anemometer Test Instrument The Model 471B Digital Thermo Anemometers are versatile dual function instruments that quickly and easily measure air velocity or volumetric flow plus air temperature in imperial or metric units. High contrast LCD display shows both selected readings simultaneously. Convenient backlight provides perfect visibility in low light conditions. Light automatically shuts off after 2-12 minutes to prolong battery life. Low battery warning is included. Stainless steel probe with comfortable hand grip is etched with insertion depth marks from 0 to 8 inches and 0 to 20 cm. Extruded aluminum housing fully protects electronics, yet is lightweight and comfortable to hold even when taking multiple readings as part of duct traverses. Up to 99 readings may be stored for later retrieval. An integral sliding cover protects sensors when not in use. Items included with the 471B are 9 volt alkaline battery, sensing probe, wrist strap and custom carrying case. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model 8904 Integral Vane Thermo-Anemometer

Simultaneously measure air velocity and temperature with the Model 8904 Integral Vane Thermo-Anemometer. The large 1.3″ (34 mm) display allows users to easily view readings. User-selectable wind speed units include ftmin, msec, knots, mph and kmhr. Additionally, a built-in sensor records ambient temperature in Â°F or Â°C. Model 8904 features include data hold, the ability to record minimum, maximum and average readings on a single point and an RS-232 interface setting. The units can also record and average up to 2 hours of data while displaying the continuous running average. Model 8904 includes hard carrying case, battery and instruction manual. This compact meter is ideal for HVAC inspection, energy audits and balancing applications.

Applications : This meter is most ideal for measuring heat, ventilation, air conditioning, refrigerating wind flow and temperature.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

Series MVA Mini-Vane Thermo-Anemometer

The Series MVA Mini-Vane Thermo-Anemometer has the ability, depending on the model, to measure air velocity, volume flow, temperature, relative humidity, and barometric pressure. With its 1.18″ diameter (30 mm) vane, the Series MVA is ideal for spot measurements at air outlets. The MVA- 02 is capable of detecting air flows up to 4921 ftmin (25 ms) and temperatures up to 140°F (60°C). The MVA-03 additionally detects humidity from 0 to 100% with high accuracy. The MVA-04 can do all three of the above functions, plus adds the feature of measuring absolute pressure from 10.3 to 32″ Hg (350 to 1100 hPa). The Series MVA anemometers include a wide variety of user selectable units. These units feature a 4-digit LCD display, data hold, ability to record maximum and minimum, storage up to 99 air velocity records, and an auto-shutoff to prolong life. The Series MVA also has a detachable probe for convenient replacing, if necessary. The unit includes a 6 blade mini-vane probe, nylon case, and a battery.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

Model 89088 Pocket Wind Meter

The Model 89088 measures wind speed, temperature and wind chill accurately with its rotating vane and thermo-anemometer sensor. The body and rotating vane are constructed of light weight, sturdy ABS plastic. The ABS impeller spins on a high precision jewel bearing allowing for maximum performance. Wind speed, maximum wind speed, temperature and wind chill can quickly be viewed on the LCD display in user selectable measuring units of degrees F or C, ms, ftmin, Knots, MPH, Khr and Beauforts. The 89088 also features a data hold button and a 5 minute automatic shut-off to conserve battery life. Accessories include a supplied battery and a cloth carrying pouch.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

460 Air Meter
Brand	DWYER USA .
Model	460 .
Application	Industrial Use, Laboratory Use .
460 Air Meter Simple and quick, the No. 460 Air Meter is popular for servicing air conditioning, heating and ventilating equipment. Direct reading velocity and static pressure scales – both low and high ranges – show supply and return grille velocities, furnace draft, pressure drop across filters, etc. The 460 gives consistent, accurate results with no tedious calibration. Rugged plastic for rough daily use. Dual velocity ranges read 260-1200 and 1000-4000 fpm; pressure ranges from .005-.09 and .05-1.0 inches w.c. Complete Kit includes air meter, return and supply grille probes, angle connector, cleaning materials, instruction card, air velocity calculator and carrying case Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Series AQTI Air Quality Test Instrument Kits
Series AQTI	Series AQTI .
Series AQTI Air Quality Test Instrument Kits The Series AQTI Air Quality Test Instruments combine the versatile Model UHH handheld base with various compatible probes and modules. This versatile combination provides a line of instruments capable of streamlining a technician’s everyday testing by combining all into one product. All compatible probes and modules can be field adapted at any moment and are instantly recognized by any UHH handheld base instrument. The plug and play probes allow a user to run through various tests, eliminating the need to switch instruments and recall how to navigate all the various equipment from multiple vendors, reducing time and simplifying operation. Series AQTI Air Quality Test Instruments come prepackaged in thermo-anemometer or thermo-hygrometer probe kits. Additional wired and wireless probes may be ordered separately to create any customized test package to suit your needs. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Series 160E Ellipsoidal Tip Pitot Tube
Brand	DWYER USA .
Model	Series 160E .
Application	Industrial Use, Laboratory Use .
Series 160E Ellipsoidal Tip Pitot Tube Series 160E Pitot Tubes are widely used in the U.K. and Europe for applications demanding high accuracy when measuring the flow of air or other compatible gases. Precision crafted tip configuration allows air to pass smoothly with minimum turbulence for consistent, reliable readings. Exterior indicator arm is aligned parallel to the 5 in. (13 cm) sensing tip so you always know that unit is properly positioned inside duct. Sliding depth indicators grip firmly to ensure uniform insertion – critical when making multiple measurements as part of a complete traverse; the best way to determine average velocity. Total and static pressure taps are 14″ (6 mm), permanently silver soldered to the connection block, leak-proof and durable. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Series 160F Straight Stainless Steel Pitot Tubes
Brand	DWYER USA .
Model	Series 160F .
Application	Industrial Use, Laboratory Use .
Series 160F Straight Stainless Steel Pitot Tubes Ideal for use with our precision air velocity gages, transmitters and digital test instruments, the Series 160F Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. Permanent, stamped insertion depth graduations on sides of the 160F Pitot facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Straight design allows for easy insertion into ducts through grills and pressure taps as well as aids in positioning in hard to reach locations where a hook style Pitot tube may not allow access. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Model 8912 Vane Thermo-Anemometer

Model 8912 Vane Thermo-Anemometer

Measure air velocity, air volume, temperature, humidity, and BTU with the Model 8912 Vane Thermo-Anemometer. The large 1.7″ (44 mm) display allows users to easily view readings. User-selectable wind speed units include ftmin, ms, knots, mph, and kmhr. In addition to these functions, the 8912 is capable of measuring relative humidity, wet bulb temperature, dew point, and BTU capacity. A built-in sensor records ambient temperature in °F or °C. Model 8912 features include data hold, the ability to record minimum, maximum, and average readings on a single point, and an RS-232 interface setting. The Model 8912 also features a detachable probe for easy replacement, if necessary. The units can record and average up to 2 hours of data while displaying the continuous running average. Each unit includes hard carrying case, batteries, calibration data tag and instruction manual. This versatile meter is perfect for HVAC inspection, energy audits and balancing applications

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI

Seriees 100 Durablock Solid Plastic Portable Gag
Brand	DWYER USA .
Model	Series 100 .
Series 100 Durablock Solid Plastic Portable Gage Dwyer® solid plastic portable manometers are precision instruments in inclined and vertical (well-type) styles for the measurement of static pressure, vacuum or differential pressure. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrication of acrylic instruments. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Adjustable Pressure Switch
Rs 2,200 / Piece
Electrical Connection	3-wire, 20 AWG insulated with PVC, 12″ (30 cm) length.
Process Connection	-1/8″ male NPT.
Brand	DWYER USA
Weight	3 oz (85 g).
Sensor Element	Capsule
Cycling	20 CPM.
Electrical Rating	5 A 250 VAC, 3 A 28 VDC.
Switch Type	SPDT snap action.
Model	Series-APS-AVS
Application	Industrial .

Durable Pressure Switch
Rs 3,000 / Piece
Electrical Connection	8-32 screw terminals.
Process Connection	1/4″ male NPT.
Brand	DWYER USA
Weight	0.13 lb (0.06 kg).
Enclosure Rating	General purpose or with cover IP65 – Weatherproof.
Wetted Materials	Base 304 SS, Diaphragm Polyimide film.
Repeatability	+/-10% of set point.
Condition	New
Temperature	-40 to 248 Degree F (-40 to 120 Degree C).
Model	Series-A6
Warranty	YAS .

High Accuracy Pressure Transmitter
Rs 2,850/ Piece
Accuracy	+/-0.05% FS RSS.
Application	Industrial
Brand	DWYER USA
Weight	9 oz (254 g).
Enclosure Rating	NEMA 4X (IP65).
Wetted Materials	17- 4 PH SS.
Output Signal mA	0 to 10 VDC (4-wire); 4 to 20 mA (2-wire).
Condition	New
Temperature	–40 to 185 Degree F (-40 to 85 Degree C).
Model	Series-644
Mounting Orientation	Vertical .

Industrial Weatherproof Pressure Transmitter
Rs 25,000 / Piece
Accuracy	0.5% FS.
Application	Industrial
Brand	DWYER USA
Loop Resistanc	1200 max.
Enclosure Rating	IP65
Wetted Materials	304 and 316 stainless steel.
Output Signal	4 to 20mA.
Condition	New
Temperature	-22 to 203 Degree F (-30 to 95 Degree C).
Model	Series-IWP
Warranty	YAS .
Power Requirements	12 to 36 VDC. .
Temperature Coefficient	0.3% F.S. per 10 Degree C. .
Pressure	1.5 x pressure range. .
Compensated Temperature Limits	32 to 158 Degree F (0 to 70 Degree C). .
Certification Required	Yes .
Stability	0.2% FS per year. .

Intrinsically Safe Pressure Transmitter
Rs 11,000 / Piece
Application	Monitoring pressure in hazardous environments,Process
Brand	DWYER USA
Weight	8.9 oz (252 g).
Enclosure Rating	NEMA 4X (IP66).
Wetted Materials	316, 316L SS.
Output Signal mA	0 to 10 VDC (4-wire); 4 to 20 mA (2-wire).
Condition	New
Response Time	50 ms.
Process Connection	1/4″ male/female NPT and BSPT.
Output Signal	4 to 20 mA.
Power Requirement	10 to 28 VDC.
Electrical Connections	3 ft. cable or 4-pin M-12 Connector.
Temperature	0 to 176 Degree F (-18 to 80 Degree C).
Model	Series-IS626
Current Consumption	38 mA (maximum). .

Low Pressure Transducer
Rs 4,200/ Piece
Housing Material	318 Stainless Steel.
Process Connection	1/4″-18 NPT male.
Brand	DWYER USA
Weight	11.6 oz (330 g).
Enclosure Rating	NEMA 4X (IP65).
Wetted Materials	318 Duplex SS,Ceramic,Fluoroelastomer (FKM).
Stability	-5 to 140 Degree F (-20 to 60 Degree C)
Compensated Temperature Limit	New
Temperature	-40 to 212 Degree F (-40 to 100 Degree C).
Model	Series-672
Response Time	5 ms. .

Sanitary Pressure Transmitter
Rs 19,500 / Piece
Condition	New
Output Signal	4-20 mA, 2-wire.
Brand	DWYER USA
Weight	8 oz (227 g)
Application	Food and beverage processing
Wetted Materials	316L Stainless Steel.
Applications	Sanitary process applications
Compensated Temperature Limit	20 to 180 Degree F (-7 to 80 Degree C).
Power Requirement	9-30 VDC.
Model	Series-681
Loop Resistance	800 ohms. .

Miniature Vacuum Switch
Rs 7,000 / Piece
Temperature Range	40 to 150 Degree F ( 4 to 66 Degree C).
Repeatability	+/-20%
Brand	DWYER USA
Weight	Less than 19 g.
Switch Type	SPDT normally open or normally closed.
Wetted Materials	Housing polycarbonate, Diaphragm polyurethane.

Digital Indicating Transmitter
Rs 14,500 / Piece
Condition	New
Output Signal	4 to 20 mA.
Brand	DWYER USA
Weight	1.45 lb (.66 kg).
Applications	Outdoor
Application	Compressor
Process Connection	1/2″ male NPT.
Power Requirements	12 to 36 VDC (loop powered).
Pressure Limit	2 x FS range.
Response Time	100 ms.
Model	Series-DSGT
Temperature Limits	14 to 140 Degree F (-10 to 60 Degree C).
Thermal Effects	Series-DSGT
Display Type	0.04% FS/ Degree F.

Bourdon Tube Pressure Switches
Rs 3,500 / Piece
Temperature Range	180 Degree F (82 Degree C).
Usage/Application	Mechanical HVAC or process equipment
Brand	DWYER USA
Condition	New
Warranty	YAS
Mounting Orientation	Vertical
Electrical Connections	Screw terminal.
Wetted Materials	Brass, 403 SS, or 316 SS.

Brass Digital Pressure Gauge
Rs 10,500 / Piece
Housing Material	ABS plastic.
Display Type	4 Digit LCD (1-1/4 x 5/8″).
Condition	New
Accuracy	+/-0.5% FS.
Connection	New
Battery Included	Yes
Size	2.5″ OD.
Brand	DWYER USA
Weight	0.29 lb (0.13 kg).
Model Number	Model-BDG-01
Pressure	2X pressure range, Burst pressure 3X pressure range.
Battery Life	2 to 3 years
Temperature	14 to 140 Degree F (- 10 to 60 Degree C).
Wetted Materials	Brass and silicone sensor.
Long Term Stability	+/-0.05% FS/year.
Enclosure Rating	IP10
Thermal Effect	0.04% FS/ Degree C.
Process Connection	1/4″ male NPT.
Power Consumption	3 V CR123A

Digital Calibration Pressure Gage
Rs 5,500 / Piece
Battery Life	Up to 10,000 hours (600 working hours default 3 times/s).
Weight	1.28 lb (0.58 kg).
Condition	New
Connection	New
Pressure Limits	120% FS
Brand	DWYER USA
Accuracy	0.05% FS; +/-1 least significant digit.
Battery Included	Yes
Model Number	Series-DCGII
Wetted Materials	316 SS.
Temperature Accuracy	+/-1 Degree C
Temperature Limits	14 to 122 Degree F (-10 to 50 Degree C).
Compensated Limits	32 to 122 Degree F (0 to 50 Degree C).
Process Connection	1/2″ male NPT.
Display	5-digit LCD with blue backlight.
Power Requirement	9 V alkaline battery
Auto Shut Off	Backlight On/off, 10 s, 20 s, 30 s.

Digital Pressure Gauge With 1% Accuracy
Rs 5,500 / Piece
Display Type	4-digit LCD (.425″ H x .234″ W digits).
Connection	New
Warranty	YAS
Pressure Limits	2X pressure range. Vacuum range max. pressure is 30 psig.
Housing Material	ABS plastic.
Accuracy	+/-1.0% F.S. (Includes linearity, hysteresis, repeatability.)
Size	2.62″ OD x 1.52″ deep.
Condition	New
Temperature	30 to 120 Degree F (-1 to 49 Degree C).
Weight	5.6 oz (160 g).
Model Number	DPGA-DPGW
Battery Life	good
Brand	DWYER USA
Battery Included	Yes
Thermal Effect	0.05% FS/ Degree C.
Process Connection	1/4″ male NPT.
Power Requirements	9 V alkaline battery, included, user replaceable.
Auto Shut Off	20 minute auto shut-off.

Electronic Pressure Controller
Rs 16,000 / Piece
Brand	DWYER USA /td>
Model No.	Series-EDA
Usage/Application	Process control
Display Type	Digital
Condition	New
Weight	1.18 lbs (535 g).
Warranty	YAS
Wetted Materials	316L SS.
Housing	Polycarbonate
Pressure Limits	1.5 x Range.
Display	4 Digit backlit LCD (Digits 0.60″H x 0.33″W).
Power Requirement	12 to 30 VDC/AC.
Power Consumption	2.5 Watts
Enclosure Rating	NEMA 4X (IP65).

Industrial Pressure Gauge
Rs 1,650 / Piece
Temperature	0 to 150 Degree F (17 to 65 Degree C).
Housing Material	304 SS
Condition	New
Brand	DWYER USA
Connection	New
Pressure Limits	Full scale range.
Model Number	Series-SGA
Accuracy	+/-1.6% Full scale.
Weight	1.8 oz (51 g) or 4.3 oz (122 g).
Size	1.5″ (40 mm) or 2″ (50 mm).
Wetted Materials	Brass
Lens	Plastic
Process Connection	1/8″ NPT.

Low Cost OEM Pressure Switch
Rs 11,200 / Piece
Switch Type	SPDT snap switch.
Brand	Dwyer Usa
Weight	10.5 oz (297 g).
Model No.	Series-A1F
Process Connection	1/4″ female NPT and 1/2″ male NPT.
Temperature Range	-40 to 175 Degree F (-40 to 80 Degree C).
Pressure Limit	500 psig (34 bar).

Low Pressure Gauge
Rs 1,000 / Piece
Size	2.5″ (63 mm).
Weight	8 oz (227g).
Housing Material	Chrome plated steel.
Condition	New
Brand	Dwyer Usa
Connection	New
Model Number	Series-LPG5
Accuracy	+/-3-2-3% FS.
Temperature	-4 to 140 Degree F (-20 to 60 Degree C).
Wetted Materials	Brass connection, Bronze tube
Lens	Polycarbonate
Pressure Limits	Full scale range.
Process Connections	1/4″ male NPT.

Diaphragm Operated Pressure Switch
Rs 22,500 / Piece
Condition	New
Usage/Application	Low pressure applications
Weight	General Purpose 2 lb (0.9 kg).
Brand	DWYER USA
Warranty Required	YAS
Model No	Series-AP
Process Connection	1/4″ female NPT.
Temperature	-30 to 150 Degree F (-35 to 66 Degree C).
Conduit Connection	7/8″ (22.23 mm) hole for 1/2″ (12.7 mm) conduit hub.

Stainless Steel Low Pressure Gage
Rs 700 / Piece
Size	2.5″ (63 mm)
Ambient Temperature	-13 to 149 Degree F (-25 to 65 Degree C)
Model Number	Series-SGX-SGF
Condition	New
Connection	New
Weight	4.6 oz (0.13 kg).
Brand	Dwyer USA
Wetted Materials	SGX Brass, SGF 316/316L SS.
Housing	304 SS.
Lens	Glass
Process Temperature	212 Degree F (100 Degree C) max.
Process Connection	1/4″ male NPT.
Enclosure Rating	NEMA 3 (IP54).

Weatherproof Digital Pressure Gauge
Rs 1,100 / Piece
Connection	New
Size	2.5″ OD.
Temperature	14 to 140 Degree F (-10 to 60 Degree C).
Display Type	4 Digit LCD (1-1/4 x 5/8″).
Condition	New
Battery Life	2 to 3 years
Model Number	Series-WDG
Battery Included	Yes
Housing Material	Fiberglass Reinforced PP plastic.
Pressure	X pressure range, Burst pressure 3X pressure range.
Brand	DWYER USA
Weight	0.34 lb (0.15 kg).
Wetted Materials	304L SS.
Long Term Stability	+/-0.05% FS/year.
Enclosure Rating	IP65
Thermal Effect	0.04% FS/ Degree C.
Process Connections	1/4″ male NPT.

Kimo Make Differential Pressure Transmitter TM110

Rs 25,000 / Piece

Kimo Make Differential Pressure Transmitter CO110

Rs 25,000 / Piece

Kimo Make Differential Pressure Transmitter CO112

Rs 25,000 / Piece

Kimo Make Differential pressure transmitter type

Kimo Make Differential PressureTransmitter TypeCP114, CP115

Kimo Make Differential Pressure Transmitter CP116

Kimo Make Differential Pressure Transmitter CTV110

Kimo Make Differential Pressure Transmitter TH110

Kimo Make Differential Pressure Transmitter HM110

Kimo Make Differential Pressure Transmitter CR110

Rs 25,000 / Piece

Kimo Make Differential Pressure Transmitter LR110

Rs 25,000 / Piece

RHP-2D10 DWYER Humidity Temperature Transmitters

Rs 12,500 / Piece

Relative Humidity And Temperature Transmitter

Rs 16,500 / Piece

Outside Air Humidity Radiation Shield

Rs 12,500 / Piece

Dew Point Transmitter

Rs 6,500 / Piece

Carbon Dioxide Transmitter

Rs 12,500 / Piece

Compact USB Data Logger with Display

Rs 12,000 / Piece

Graphical Display Data Logger

Rs 12,000 / Piece

Humidity Switch

Rs 2,500/ Piece

Humidity and Temperature Transmitter

Rs 16,500 / Piece

Temperature and Humidity Switch

Rs 9,500 / Piece

Button Data Logger

Rs 2,100 / Piece

Weather Resistant Humidity and Temperature Transmitter

Rs 15,000 / Piece

Hazardous Area Humidity and Temperature Transmitter

Rs 16,250 / Piece

Low Cost Galaxy Differential Pressure Gauge

Rs 1,976 / Piece

Galaxy Make Magnehelic Differential Pressure Gauges

Rs 3,500 / Piece

Low Cost Galaxy Differential Pressure Gauges

Rs 3,500 / Piece

Galaxy Make Magnetic Gauge

Rs 3,500 / Piece

Galaxy Magnehelic Gauge

Rs 3,500 / Piece

Rs 5,401/ Piece

Rs 12,500 / Piece

Rs 4,000 / Piece

Rs 12,500/ Piece

Rs 12,500/ Piece

Rs 25,000/ Piece

Rs 12,500/ Piece

Rs 12,500/ Piece

Rs 25,000/ Piece

Rs 25,000/ Piece

Rs 12,500 / Piece

Rs 9,500 / Piece

Rs 8,500/ Piece

Rs 12,500 / Piece

Rs 25,000/ Piece

Rs 12,500 / Piece

Rs 9,500/ Piece

Rs 12,500 / Piece

Rs 350 / Piece

Rs 25,000/ Piece

Rs 10,780/ Piece

Rs 12,500/ Piece

Rs 4,000 / Piece

Series WDG Weatherproof Digital Pressure Gage

Rs 25,000 / Piece

Series DPGA & DPGW Digital Pressure Gauge

Rs 12,500/ Piece

Condition	New
Weight	0.75 lb (0.34 kg).
Connection	New
Brand	DWYER USA
Wetted Materials	Silicone, Steel, and SS.
Enclosure Rating	General Purpose.
Switch Type	DPST snap action
Conduit Connection	7/8″ hole for 1/2″ conduit hub (2 places).
Process Connection	1/4″ female NPT.
Repeatability	+/-5psig (+/-0.3 bar).
Temperature Range	140 Degree F (60 Degree C).

Model	Switch Type	Range psig (bar)	Approx. Adjustable Deadband psig (bar)	Max. Pressure psig (bar)
CXA-S1	NC	15-80 (1.0-5.5)	15-30 (1.0-2.1)	129 (8.9)
CXA-S2	NC	30-100 (2.1-6.9)	20-35 (1.4-2.4)	179 (12.3)
CXA-S3	NC	35-150 (2.4-10.3)	30-40 (2.1-2.8)	204 (14.1)
CXA-R1	NC	15-80 (1.0-5.5)	15-30 (1.0-2.1)	129 (8.9)
CXA-R2	NC	30-100 (2.1-6.9)	20-35 (1.4-2.4)	179 (12.3)
CXA-R3	NC	35-150 (2.4-10.3	30-40 (2.1-2.8)	204 (14.1)

2000 Magnehelic Gage
Rs 3,600 / Piece
Brand	DWYER USA
Measuring Range(mm) .	0-50 MM WC

3000MRS Photohelic Switch
Rs 35,000 / Piece
Model No.	3000MRS
Measuring Range(mm)	3000MRS
Brand	DWYER USA

Gas Mass Flow Meter
Rs 42,750 / Piece
Brand	DWYER USA
Condition	-New
Model	Series-GFM2
Accuracy	+/-1% FS.
Certifications	YAS
Power	11 to 26 VDC.

Gas Turbine Flow Meter
Rs 22,500 / Piece
Weight	0.16 lb (75 g).
Condition	-New
Model	DWYER USA
Accuracy	+/-3% FS.
Voltage	11.5 to 15 VDC
Power	11.5 to 15 VDC .

High Pressure Brass Flow Switch
Rs 1,500 / Piece
Model Number	Series-P8
Condition	-New
Brand	DWYER USA
Material	Brass
Weight	16 oz (.17 kg)
Warranty	YAS .

In Flow Sensors
Rs 12,000 / Piece
Model	Series-DS
Condition	-New
Brand	DWYER USA
Type	Magnetic Sensor
Pressure Rate	200 psig (13.78 bar) at 200 Degree F (93.3 Degree C
Warranty	YAS .
Size	DS-300 1 to 10″ (2.5 to 25.4 cm); DS-400 6 to 24 ” (15.2 to 61 cm). .

V10 Flotect Mini Size Flow Switches
Rs 2,450 / Piece
Model Number	Series-V10
Condition	-New
Brand	DWYER USA
Weight	5.5 oz (0.16 kg).
Warranty	YAS .

Vane Flow Switch
Rs 1,750 / Piece
Model Number	Series-FS-2
Condition	-New
Brand	DWYER USA
Warranty	YAS .