+(91)-9871034100
PHONE NO
07AOSPS8386M1ZM
GST NO
Enquiry Now

Galaxy Differential Pressure Gauge Wholesale India

Galaxy Differential Pressure Gauge Wholesale India, Uncategorized

Galaxy Differential Pressure Gauge Wholesale India

Nov 2, 2021 by admin 0 Comments

GALAXY D5 Mini Digital Differential Pressure Gauge

 
 
MaterialABS
Display Type5 bits
BrandGalaxy
Weight220 g
Medium Temperature0-60degC
Protection Type65
Process Connection5 mm
Output0-10 V

Applications and features:
  • Apply high accuracy MEMS sensor and digital technologies, can measure positive, negative or differential pressure. It can completely replace the traditional pointer mechanical gauges
  • It can measure fan and blower pressures, filter resistance,air
  • velocity,pressure drop across orifice plates, differential pressure of medical pharmaceutical machine, biological safety cabinets, clean bench,etc.
  • It could be flush, surface or wall mount.
  • Accuracy is up to +-1% FS,with large LCD display.
  • Function keys zero reset, units select, display update time, automatic sleep time, alarm,etc.

Specifications:

  • Medium: Non-combustible, non-corrosive air, insensitive to moisture, dust, condensation and oil
  • Working Temp. D5-10~50 DegreeCD5P/G/T-20~70 DegreeC Medium Temp. 0~60 DegreeC
  • Temp. Compensation0~50 DegreeC
  • Working Pressure overload 10xFS, burst 15xFS
  • Display 5 bits LCD, with engineering unit, with backlight
  • (except D5)
  • Output 0-10V / 4-20mA(3 wires)
  • Output load 500(current), 2K(voltage)
  • Digital Output RS485/Modbus(9600-n-8-1)
  • Relay Output 2xSPST, 1A/30VDC, 0.5A/125VAC
  • Accuracy up to +-1.0%FS, see accuracy table
  • Long term stability +-0.5%FS /Year
  • Thermal effect <0.05%FS/ DegreeC(zero), <0.08%FS/ DegreeC(FS)
  • Battery type (D5)
  • Power AA battery x 4, recommend LR6 alkaline
  • Display update time selectable for 0.5/1/5/10s (default 1s)
  • Automatic sleep time selectable for normal open (NO), or 1/5/10min (default 1min)
  • Battery service life when display update time=1s and automatic sleep time=NO,2 year. When displaytime>1s or automatic sleep time1min, will be longer. It also depends on the quality of the batteries.
  • Power type (D5P/D5G/D5T) 15~28VDC/AC
  • Process Connection 5mm ID tubing, two pairs (left/back)
  • Keys 3 touch buttons
  • Protection IP65
  • Weight 220g (battery type incl. batteries), 180g(power type)
  • Materials ABS
  • Approval CE
  • Accessory A-S0 is standard. It can be used for surface or panel mount. See details in Accessories.
 

Galaxy D5 Mini Digital Differential Pressure Gauge

 
 
MaterialABS
BrandGalaxy
Weight220 g
ProtectionIP 65
Process Connection5 mm
Power BatteryAA batteryx4
Output0-10 V


Applications and features:

  • Apply high accuracy MEMS sensor and digital technologies, can measure positive, negative or differential pressure. It can completely replace the traditional pointer mechanical gauges
  • It can measure fan and blower pressures, filter resistance,air velocity,pressure drop across orifice plates, differential pressure of medical pharmaceutical machine, biological safety cabinets, clean bench,etc.
  • It could be flush, surface or wall mount.
  • Accuracy is up to +-1% FS,with large LCD display.
  • Function keys zero reset, units select, display update time, automatic sleep time, alarm,etc.


Specifications:

  • MediumNon-combustible, non-corrosive air, insensitive to moisture, dust, condensation and oil Working Temp. D5-10~50 DegreeCD5P/G/T-20~70 DegreeC Medium Temp. 0~60 DegreeC
  • Temp. Compensation0~50 DegreeC
  • Working Pressure overload 10xFS, burst 15xFS
  • Display 5 bits LCD, with engineering unit, with backlight
  • (except D5)
  • Output 0-10V / 4-20mA(3 wires)
  • Output load 500(current), 2K(voltage)
  • Digital Output RS485/Modbus(9600-n-8-1)
  • Relay Output 2xSPST, 1A/30VDC, 0.5A/125VAC
  • Accuracy up to +-1.0%FS, see accuracy table
  • Long term stability +-0.5%FS /Year
  • Thermal effect <0.05%FS/ DegreeC(zero), <0.08%FS/ DegreeC(FS)
  • Battery type (D5)
  • Power AA battery x 4, recommend LR6 alkaline
  • Display update time selectable for 0.5/1/5/10s (default 1s)
  • Automatic sleep time selectable for normal open (NO), or
  • 1/5/10min (default 1min)
  • Battery service life when display update time=1s and automatic sleep time=NO,2 year. When displaytime>1s or automatic sleep time1min, will be longer. It also depends on the quality of the batteries.
  • Power type (D5P/D5G/D5T) 15~28VDC/AC
  • Process Connection 5mm ID tubing, two pairs (left/back)
  • Keys 3 touch buttons
  • Protection IP65
  • Weight 220g (battery type incl. batteries), 180g(power type)
  • Materials ABS
  • Approval CE
  • Accessory A-S0 is standard. It can be used for surface or panel mount. See details in Accessories

Galaxy Make Magnehelic Gauge

 
 
Minimum Order Quantity12 Number
Dial Size4 inch / 100 mm
BrandGalaxy
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size1/8 inch
Warranty2 years
Pressure Limit-20 hg


Our specialization lies in offering a commendable range of Galaxy Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices.

Features:

  • Compact size
  • Accuracy
  • Easy installation

Galaxy DPGT Digital Differential Pressure Transmitter

 
Minimum Order Quantity12 Number
Product Weight340 g
Protection TypeIP65
Response Time0.5-30 ms
BrandGalaxy
Display4 bit 0.8″ red Led
Analog Output0-10 V
Power15-28 V

Specifications:

  • Medium: Non -combusti ble, non-corr osiv e air, not
  • sensitiv e to moisture, du st, condens ation and o il
  • Medium Temp.:0-60°C
  • Materials: c ast alumi num housi ng a nd PC plate
  • W ork En vi ronment: -20~+ 85°C
  • Compensate d Temp.: 0-50°C
  • W ork pressu re: 1, 2 or 5 Kpa for differ ent rang e
  • Dimension: see di agram
  • Connection:  1/8”  ID  tubi ng,  t wo  pa ir s  (on  left  si de and b ack)
  • Displa y: 4 bi ts 0.8” red LED
  • An alog output: 0-10V & 4-20mA (3 wires)
  • Output Load: ≤500??? (curr ent), ≥2K??? (voltage)
  • Digital output: RS485-M odb us RT U (960 0-n-8- 1) Relay output: 2×SPST ,1A/30VDC,0.5A/125VAC Accuracy: ±1.0%FS*, opt ional ±0.5%FS
  • Long term stability: ±0.5%FS /Year
  • Thermal effect: < 0.05%F S/°C
  • Response time: 0.5-3 0s
  • Pow er: 15-28V AC/DC
  • Ke y: 3 touc h buttons
  • Protection: IP65
  • Weight: 340 g
 

Galaxy Differential Pressure Gauge

 
 
Minimum Order Quantity12 Number
Accuracy+/-2%
Weight510 g
Housing MaterialDie cast Aluminium case
Warranty2 years
Pressure Limit-20″ hg
Process Connection1/8″

We are leading supplier and trader of Low Cost Galaxy Differential Pressure Gauge. Kindly find below product details of Low Cost Galaxy Differential Pressure Gauge.

Pressure Range Model Number Pressure Range:
  • 0 – 0.25” S2000-60PA 0 – 60
  • 0 – 0.5” S2000-125PA 0 – 125
  • 0 – 1” S2000-250PA 0 – 250
  • 0 – 2” S2000-500PA 0 – 500
  • 0 – 3” S2000-750PA 0 – 750
  • 0 – 4” S2000-1KPA 0 – 1
  • 0 – 5” S2000-1.5KPA 0 – 1.5
  • 0 – 6” S2000-2KPA 0 – 2
  • 0 – 8” Zero Center
  • 0 – 10” S2300-60PA 30 – 0 – 30
  • 0 – 15” S2300-120PA 60 – 0 – 60
  • 0 – 20” S2300-250PA 125 – 0 – 125
  • 0 – 25” mm w.c.
  • 0 – 30” S2000-6MM 0 – 6
  • 0 – 50” S2000-10MM 0 – 10
  • 0 – 100” S2000-25MM 0 – 25
 

Galaxy Model G2000-6MM Magnehelic Gauge Range 0-6 MM

 
 
ShapeRound
Size100 MM
Accuracy+/-2%
FeaturesMonitoring Blood
Weight510 g
Usage/ApplicationFilter Resistance
BrandGalaxy
Housing MaterialDie cast Aluminium
Pressure Limit-20″ hg
Temperature Range20deg to 140degF
Process Connection1/8″

The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:
  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE
 

Galaxy Magnehelic Gauge Model G2000-25MM Range 0-25 MM WC

 
 
Model NumberG2000-25MM
Usage/ApplicationAir and compatible gasses
Accuracy1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight510 g
BrandGalaxy
Thread SizeTwo 1/8′ NPT
Pressure Limits-20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)


The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:

  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE

Highly Precise Digital Manometer Keller Lex1

 
 
Model Name/NumberKeller Lex1
Size23.5 x 7.0 x 3.0 cm
Precision0,05 %FS
Battery Life2000 hours continuous operation
Pressure ConnectionG1/4″
Power Battery2 X AA Batteries
Product Weight300 g
ProtectionIP65

LEX 1 is a micro-processor controlled, accurate and versatile digital pressure measuring instrument with integrated Max.-/Min.-function for calibration and testing purposes. The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.-pressure since the last RESET LEX 1 has two operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function resp. unit or serves to display the Max.- and Min.-value
 

Galaxy Model G2000-60PA Magnehelic Gauge Range 0-60 PA

 
 
Model NumberG2000-60PA
Usage/ApplicationBlower pressures
Accuracy+1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight1 lb 2 oz (510 g)
BrandGalaxy
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Pressure Limits-20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)
Process Connection1/8″

The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,
Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:
  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE
 

Galaxy Magnehelic Gauge Model G2000-50MM Range 0-50 MM WC

 
 
Model NumberG2000-50MM
Usage/ApplicationAir and Compatible Gasses
Measuring Range0-50 MM WC
ColorBlack
Weight510 g
Dial Size100 MM
MaterialAluminium
BrandGalaxy


The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:

  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE

Galaxy Magnehelic Gauge Model G2000-10MM Range 0-10 MM

 
 
Usage/ApplicationPressure Drop Across Orifice Plates
Accuracy+1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Diameter100 mm
Weight510 g
BrandGalaxy
Pressure Limits-20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.

The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:
  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE
 

Digital Manometer Keller Leo2

 
 
Measuring Range0-700 BAR
ConnectionG 1/4 inch
Accuracy0.05% of FS
Resolution1 mBar
Model Name/NumberLeo2
BrandKeller
Weight125 g

LEO 2 is a compact, micro-processor (ìP) controlled, highly accurate and versatile pressure measuring instrument with digital indication. The piezoresistive pressure transducer as the heart of the instrument has gone through extensive pressure- and temperature tests. Its characteristics are stored in the instruments internal EEPROM. The ìP of the LEO 2 reads the characteristic values and calculates therefrom the pressure to an accuracy of < 0,1 %FS at room temperature.

The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.- pressure since the last RESET.

LEO 2 has two operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function or unit. The right key is also used to switch between the Max.- and Min.-value.
 

Galaxy Magnehelic Gauge Model G2000-100MM Range 0-100 MM WC

 
 
Usage/ApplicationAir and Compatible Gasses
BrandGalaxy
Accuracy+1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight510 g
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Pressure Limits-20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.

The Series G2000 Differential Pressure Gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Technical specification:
  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE
 

Galaxy Magnehelic Gauge Model G2000-250MM Range 0-250 MM WC

 
 
Measuring RangeAir and compatible gasses
BrandGalaxy
Accuracy+1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight510 g
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)


The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:

  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
  • Warranty: 2 years Approvals: Roi-IS, CE

Low Cost Galaxy Differential Pressure Gauge

 
 
Usage/ApplicationAir and Compatible Gasses
BrandGalaxy
Accuracy+1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Pressure Limits-20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 DegreeF (-7 Degree to 60 DegreeC)

The Series G2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges,

Series G2000 are for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts,It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration and over-pressures.

Techinical specifaction:
  • Pressure Limits: –20″ Fig to 15 PSI (-0.677 bar to 1.034 bar)
  • Media Compatibility: Air and compatible gasses
  • Accuracy: +1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70°F (21 °C)
  • Temperature Ranges: 20° to 140°F (-7° to 60°C)
  • Housing Material: Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
  • Process Connection: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
  • Weight: 1 lb 2 oz (510 g)
  • Accessories: Two 1/8′ NPT barbed frftings,two 1/8″ NPT plugs, and three mounting tabs and screws
 

Galaxy Mack Digital Pressure Gauge

 
 
BrandGalaxy
Accuracy0.5%FS
Sampling Frequency5/sec
Overpressure150%FS
Supply Battery2 Triple A batteries
Compensated Temp.0~60degC
Operating Temp.-10~70degC


PCM580 is a high-precision intelligent digital pressure gauge. It has a high-precision sensor and displays pressure accurately in real time. It has advantages of high precision and good long term stability. PCM580 is equipped with a large size LCD, featuring with functions of zero clearing, backlight, on/off button, units switching and low pressure alarm. It is convenient to install and easy to operate. The housing and connector of PCM580 are made of stainless steel 304 with excellent vibration resistance. It can be used to measure gas, liquid, oil and other non-corrosive medium of stainless steel.

PCM580 is applicable to portable pressure measurement and equipment supporting and calibration fields.

Galaxy Digital Display Pressure Transmitter 0-10 bar

 
 
Model NumberPCM300(WTR01)
Accuracy0.5%F.S
Product Weight180g approx.
Protection TypeIP65
Output Type4 to 20mA
BrandGalaxy
Pressure Range100 kPa
Storage Temp.-40degC -125degC

PCM300(WTR01) industrial pressure transmitter is a standard andpopular transmitter applied in air and liquid pressure measuring. A highsensitivity silicon pressure chip is employed in the sensor. Themost important specification for industry application is long termstability. The PCM300(WTR01) pressure transmitter is designed forIndustry Applicationwith perfect long term stability.

Specifications:
  • Pressure Range – -100kpa, 10kPa, 35kPa, 70kPa, 100kPa, 250kPa, 400kPa, 600kPa, 1MPa, 1.6MPa, 2.5MPa, 4MPa, 6MPa,10MPa, 16MPa, 25MPa, 40MPa, 60MPa, 100MPa
  • Pressure Reference – Gauge pressure | Absolute pressure | Sealed gauge pressure
  • Overpressure – 300%F.S.(≤70kPa) | 200%F.S.(???25MPa) | 150%F.S.(≥25MPa)
  • Output – 4 to 20mA | 0.5 to 4.5V | 1 to 5V | 0 to 5V
  • Accuracy (linearity,repeatability and hysteresis) – ±0.5%F.S. (Typical)
  • Supply – 24VDC | 12VDC | 5VDC
  • Compensated Temp. – -10ºC -70ºC | -20ºC -85ºC
  • Operating Temp. – -40ºC -125???
  • Storage Temp. – -40ºC -125???
  • Zero Temp. Coefficient – ±1.5%F.S.max. (@-20ºC -85ºC)
  • Span Temp. Coefficient – ±1.5%F.S.max. (@-20ºC -85ºC)
  • Pressure Connection – See ”how to order”
  • Protection – IP65
  • Housing Material – Stainless steel 304 (316L for sensor inside)
  • Housing Diameter – φ26.5 mm
  • Long-Term Stability – ≤0.2%F.S./year
  • Weight – 180g(approx.)
 

Galaxy Magnehelic Gauge

 
 
Minimum Order Quantity12 Number
BrandGalaxy
Accuracy+/-2%
Weight510 g
Housing MaterialDie Cast Aluminium
Warranty2 years
Pressure Limit-20″ hg
Temperature Range20deg to 140degF

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Galaxy Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:
  • Accuracy
  • High functionality
  • Long service life

Specifications:
  • We provide Galaxy magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge
  • Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%
  • Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others
  • We offer Galaxy magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas
  • In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover
  • These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

Technical Specifications:
  • Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
  • Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option
  • HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)
  • Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
  • Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)
  • Size: 4 (101.6 mm) Diameter dial face
  • Mounting Orientation: Diaphragm in vertical position, Consult factory for
  • Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back
  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
  • Other position orientations

Applications:
  • Filter Status
  • Duct Static Pressure
  • Clean Room Pressure
  • Building Pressure
  • Fan and Blower Pressure
  • Paint Booths
  • Dust Collectors
  • Glove Box Pressure
  • Bubbler Systems
  • Cabinet Purging
 

Rh And Temp Logger

 
 
Dimensions89mm x 36mmx 16mm
Accuracy+-3%RH
Resolution0.1%RH typically 0.1 DegreeC
Measurement RangeHumidity 0%~100%RH, Temp -30 DegreeC ~ 60 DegreeC
Memory Capacity32,000
Record Interval10 seconds to 18 hours adjustable [Default:10 mins]

The Device is Mainly Used to Monitor the Temperature and Humidity Data of Food, Medicine, Chemical Products and Other Products During Storage and Transportation. It is Widely Used in All Links of Warehousing and logistics Cold-Chain, such as Reefer Containers, refrigerated trucks, Refrigerated Distribution Boxes, Cold Storage Laboratory,…

Galaxy Multi-Use PDF TEMP & RH Data Logger is the perfect Tool for Cold-Chain Monitoring Anddocumentation of Temperature and Relative Humidity Conditions That are Critical in Laboratories, Pharmaceutical,Medical, Storage, Freezers, Coolers, Shipping Containers, Warehouses, Environmental Monitoring and Food Storage Applications..

Features:
  • Designed to be Multi-Use
  • Temperature & Humidity Measurement and Recording
  • Statistics available on LCD Screen
  • No Software Needed to Export Data
  • Automatically Generates PDF Report and CSV File
  • Reprogrammable Software For Logging Parameters, Alarms, And Start Delay

Specifications:
  • Temperature Scale – °C or °F
  • Accuracy – ±3%RH; ±0.5°C (-20°C ~ +40°C), ±1.0°C(Other Range)
  • Measurement Range – Humidity 0%~100%RH, Temp -30°C ~ 60 °C
  • Resolution – 0.1%RH Typically 0.1°CM
  • Memory Capacity – 32,000
  • Recording Options Delayed or Push-To-Start Logging
  • Record Interval – 10 seconds to 18 hours adjustable [Default:10 Mins]
  • Start Delay – Start Delay Programmable (0 ~ 254 mins) [Default: 30 Mins]
  • Alarm Delay – Programmable (0 ~ 960 mins) [Default: 10 mins]
  • Alarm Range – Programmable High or Low Alarm Limit For Each Channel
  • [Default: <2°C or >8°C, <40%RH or >80%RH]
  • Shelf Life / Battery – Typically 1 Year; CR2032 3.0V Lithium Battery (Depending on Sampling Rate and Environment)
  • Report Generation – Simultaneously Generate PDF Report and CSV File
  • Communication Interface – USB2.0
  • Time Zone – UTC +0:00 (Default)
  • Dimensions – 89 MM X 36 MM X 16 MM
  • N.W. – 25g
 

Multiuse PDF Temp And Rh Data Logger

 
 
Dimensions89mm x 36mmx 16mm
Weight25g
Start DelayStart Delay Programmable (0 ~ 254 mins) [Default: 30 mins]
Communication InterfaceUSB2.0
Alarm DelayProgrammable (0 ~ 960 mins) [Default: 10 mins]
Record Interval10 seconds to 18 hours adjustable [Default:10 mins]
Memory Capacity32,000


The Device is Mainly Used to Monitor the Temperature and Humidity Data of Food, Medicine, Chemical Products and Other Products During Storage and Transportation. It is Widely Used in All Links of Warehousing and logistics Cold-Chain, such as Reefer Containers, refrigerated trucks, Refrigerated Distribution Boxes, Cold Storage Laboratory,…

Galaxy Multi-Use PDF TEMP & RH Data Logger is the perfect Tool for Cold-Chain Monitoring Anddocumentation of Temperature and Relative Humidity Conditions That are Critical in Laboratories, Pharmaceutical,Medical, Storage, Freezers, Coolers, Shipping Containers, Warehouses, Environmental Monitoring and Food Storage Applications..

Features:

  • Designed to be Multi-Use
  • Temperature & Humidity Measurement and Recording
  • Statistics available on LCD Screen
  • No Software Needed to Export Data
  • Automatically Generates PDF Report and CSV File
  • Reprogrammable Software For Logging Parameters, Alarms, And Start Delay


Specifications:

  • Temperature Scale – °C or °F
  • Accuracy – ±3%RH; ±0.5°C (-20°C ~ +40°C), ±1.0°C(Other Range)
  • Measurement Range – Humidity 0%~100%RH, Temp -30°C ~ 60 °C
  • Resolution – 0.1%RH Typically 0.1°CM
  • Memory Capacity – 32,000
  • Recording Options Delayed or Push-To-Start Logging
  • Record Interval – 10 seconds to 18 hours adjustable [Default:10 Mins]
  • Start Delay – Start Delay Programmable (0 ~ 254 mins) [Default: 30 Mins]
  • Alarm Delay – Programmable (0 ~ 960 mins) [Default: 10 mins]
  • Alarm Range – Programmable High or Low Alarm Limit For Each Channel
  • [Default: <2°C or >8°C, <40%RH or >80%RH]
  • Shelf Life / Battery – Typically 1 Year; CR2032 3.0V Lithium Battery (Depending on Sampling Rate and Environment)
  • Report Generation – Simultaneously Generate PDF Report and CSV File
  • Communication Interface – USB2.0
  • Time Zone – UTC +0:00 (Default)
  • Dimensions – 89 MM X 36 MM X 16 MM
  • N.W. – 25g

Head Mounted Temperature Transmitters

 
 
Minimum Order Quantity12 Number
Model NumberPCT380
BrandGalaxy
Power Supply12-40 VDC
Response TimeLess than 1 s
Operating Temp-40degC-85degC
Ingress Protection4g-2, 50 Hz
Digital CommunicationHart protocol
Signal Output4-20mA | 1-5V(customized)

Function:
  • Can Convert all inputs to 4-20 mA
  •  Input: Thermocouples, RTD, Resistance Or Voltage
  •  Configuration Directly Via PDA or PC
  •  Build-in Cold Junction Compensation
  •  Available With Screw-in Temperature Probe
PCT380 is a Head Mount Temperature Transmitter With a Single Input. The Single Input Accepts Thermocouples, RTD, Resistance Or Voltage Source. All Inputs Are linearized And Converted in to an Industrial Standard 4 to 20 mA output for Transmission to Your System.
 

Sensocon A1 Digital Differential Pressure Gauge, Uncategorized

Sensocon A1 Digital Differential Pressure Gauge

Nov 2, 2021 by admin 0 Comments

Sensocon Digital Differential Pressure Gauge Modal A1010-11

 
 
BrandSensocon USA
Measuring Range+-30.00″ WC||+-7500 Pa
Model Name/NumberA1010-11
Usage/ApplicationIndustrial
MaterialAluminium
ConnectionNew
Display TypeDigital
TypeSensocon Digital Differential Pressure Gauge Modal A1010-11
ColorBlack
Scale Range+-30.00″ WC||+-7500 Pa
Accuracy+-1.00%
DesignDigital
Diameter5.00″
PowerUniversal Power 24-240 VAC/VDC
Dial Size5.00″
Signal OutputOptional 4-20 mA output
Size5.00″
MountingCenter Back Mount
Thread Connection3/16″ NPT
CalibrationYAS
WarrantyYAS
SeriesA1
Packaging Type1 NOS
I Deal InNew Only
Battery IncludedNo
Country of OriginMade in India

Sensocon Digital Differential Pressure Gauge Modal A1010-11

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1010-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±30.00″ WC, ±7.5 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±30.00″ WC||±7500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 30.0IN (7.5 KPA), 4-20 MA
Manufacturer:Sensocon USA
 

Sensocon Digital Differential Pressure Gauge Modal A1000-12

 
 
BrandSensocon USA
Pressure Range+-40.00″ WC||+-10000 Pa
Usage / ApplicationHVAC Systems
Pressure TypeDifferential
Display TypeDigital
Connection TypeBSP
Connection Size3/16″ NPT
MountingCenter Back Mount
Model Name/NumberA1000-12
Pointer MaterialAluminium Black
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC

Sensocon Digital Differential Pressure Gauge Modal A1000-12

Digital Differential Pressure Gauge, ±1.00%, ±40.00″ WC, ±10 kPa

Manufacturer:Sensocon USA
MPN:A1000-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, ±1.00%, ±40.00″ WC, ±10 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±40.00″ WC||±10000 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 40.0IN (10 KPA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-13

 
 
BrandSensocon USA
Pressure Range+-50.00″ WC||+-12500 Pa
Usage / ApplicationHVAC Systems
Pressure TypeDifferential
Display TypeDigital
Connection Size3/16″ NPT
MountingCenter Back Mount
Model Name/NumberA1010-13
Country of OriginMade in India
MeasurementInches of Water Column||Pascals
Accuracy+-1.00%
PowerUniversal power 24-240 VAC/VDC

Sensocon Digital Differential Pressure Gauge Modal A1010-13

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±50.00″ WC, ±12.5 kPa

Manufacturer:Sensocon USA

MPN:A1010-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±50.00″ WC, ±12.5 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±50.00″ WC||±12500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 50.0IN (12.5 KPA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-02

 
 
 
BrandSensocon USA
Pressure Range+-1.00″ WC||+-250 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential
Connection Type3/16″ NPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingAluminium
Model Name/NumberA1010-02
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-02


Sensocon Digital Differential Pressure Gauge Modal A1010-02

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±1.00″ WC, ±250 Pa

Manufacturer:Sensocon USA

MPN:A1010-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±1.00″ WC, ±250 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±1.00″ WC||±250 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 1.0IN (250 PA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-03

 
 
BrandSensocon USA
Pressure Range+-2.00″ WC||+-500 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential
Connection Type3/16″ NPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingAluminium
Model Name/NumberA1010-03
Pointer MaterialAluminium Black
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-03

Sensocon Digital Differential Pressure Gauge Modal A1010-03

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±2.00″ WC, ±500 Pa

Manufacturer:Sensocon USA

MPN:A1010-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±2.00″ WC, ±500 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±2.00″ WC||±500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 2.0IN (500 PA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-04

 
 
BrandSensocon USA
Pressure Range+-3.00″ WC||+-750 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential
Connection Type3/16″ NPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingAluminium
Model Name/NumberA1010-04
Pointer MaterialAluminium Black
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-04

Sensocon Digital Differential Pressure Gauge Modal A1010-04

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±3.00″ WC, ±750 Pa

Manufacturer:Sensocon USA

MPN:A1010-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±3.00″ WC, ±750 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±3.00″ WC||±750 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 3.0IN (750 PA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-05

 
 
Minimum Order Quantity1 Piece
BrandSensocon USA
Pressure Range+-4.00″ WC||+-1000 Pa
Display TypeDigital
Pressure TypeDifferential
Connection Type3/16″ NPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1010-05
Pointer MaterialAluminium Black
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-05

Sensocon Digital Differential Pressure Gauge Modal A1010-05

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±4.00″ WC, ±1 kPa

Manufacturer:Sensocon USA

MPN:A1010-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±4.00″ WC, ±1 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±4.00″ WC||±1000 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 4.0IN (1.0 K PA), 4-20 MA

Manufacturer:Sensocon USA
 

Sensocon Digital Differential Pressure Gauge Modal A1010-06

 
 
BrandSensocon USA
Pressure Range+-5.00″ WC||+-1250 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1010-06
Pointer MaterialAluminium Black
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-06

Sensocon Digital Differential Pressure Gauge Modal A1010-06

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±5.00″ WC, ±1.25 kPa

Manufacturer:Sensocon USA

MPN:A1010-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±5.00″ WC, ±1.25 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±5.00″ WC||±1250 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 5.0IN (1.25 KPA), 4-20 MA

Manufacturer:Sensocon USA
 

Sensocon Digital Differential Pressure Gauge Modal A1010-07

 
 
BrandSensocon USA
Pressure Range+-8.00″ WC||+-2000 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1010-07
Pointer MaterialAluminium Black
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-07

Sensocon Digital Differential Pressure Gauge Modal A1010-07

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±8.00″ WC, ±2.0 kPa

Manufacturer:Sensocon USA

MPN:A1010-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±8.00″ WC, ±2.0 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±8.00″ WC||±2000 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 8.0IN (2.0 KPA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-08

 
 
BrandSensocon USA
Pressure Range+-10.00″ WC||+-2500 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1010-08
Pointer MaterialAluminium Black
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-08


Sensocon Digital Differential Pressure Gauge Modal A1010-08

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±10.00″ WC, ±2.5 kPa

Manufacturer:Sensocon USA

MPN:A1010-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±10.00″ WC, ±2.5 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±10.00″ WC||±2500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 10.0IN (2.5 KPA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-09

 
 
BrandSensocon USA
Pressure Range+-15.00″ WC||+-3750 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
Material of casingPlastic
Model Name/NumberA1010-09
Country of OriginMade in India
Accuracy+-1.00%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1010-09

Sensocon Digital Differential Pressure Gauge Modal A1010-09

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±15.00″ WC, ±3.75 kPa

Manufacturer:Sensocon USA

MPN:A1010-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±1.00%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±15.00″ WC, ±3.75 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±15.00″ WC||±3750 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±1.00%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 1%, 15.0IN (3.75 KPA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-00

 
 
BrandSensocon USA
Pressure Range+-0.25″ WC||60 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
Material of casingPlastic
Model Name/NumberA1011-00
Country of OriginMade in India
Accuracy+-0.50%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1011-00


Sensocon Digital Differential Pressure Gauge Modal A1011-00

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±0.25″ WC, 60 Pa

Manufacturer:Sensocon USA

MPN:A1011-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±0.25″ WC, 60 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±0.25″ WC||60 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±0.25″ WC, 60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   PNL MOUNT DISPLAY, 0.50%, 0.25IN (60 PA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-01

 
 
BrandSensocon USA
Pressure Range+-0.50″ WC||+-125 Pa
UseHVAC Systems
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1011-01
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
Accuracy+-0.50%
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
TypeSensocon Digital Differential Pressure Gauge Modal A1011-01
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display


Sensocon Digital Differential Pressure Gauge Modal A1011-01

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±0.50″ WC, ±125 Pa

Manufacturer:Sensocon USA

MPN:A1011-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±0.50″ WC, ±125 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±0.50″ WC||±125 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   DISPLAY, 0.50%, 0.50IN (125 PA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-10

 
 
BrandSensocon USA
Pressure Range+-20.00″ WC||+-5000 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1011-10
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-10

Sensocon Digital Differential Pressure Gauge Modal A1011-10

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±20.00″ WC, ±5 kPa

Manufacturer:Sensocon USA

MPN:A1011-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±0.50″ WC, ±125 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±20.00″ WC||±5000 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:   DISPLAY, 0.50%, 20.0IN (5.0 KPA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-11

 
 
BrandSensocon USA
Pressure Range+-30.00″ WC||+-7500 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1011-10
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-10

Sensocon Digital Differential Pressure Gauge Modal A1011-11

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±30.00″ WC, ±7.5 kPa

Manufacturer:Sensocon USA

MPN:A1011-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±30.00″ WC, ±7.5 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±30.00″ WC||±7500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 30.0IN (7.5 KPA), 4-20 MA

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-12

 
 
BrandSensocon USA
Pressure Range+-40.00″ WC||+-10000 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
Material of casingPlastic
Model Name/NumberA1011-12
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-12

Sensocon Digital Differential Pressure Gauge Modal A1011-12

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±40.00″ WC, ±10 kPa

Manufacturer:Sensocon USA

MPN:A1011-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±40.00″ WC, ±10 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±40.00″ WC||±10000 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 40.0IN (10 KPA), 4-20 MA
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-13

 
 
BrandSensocon USA
Pressure Range+-50.00″ WC||+-12500 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1011-13
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-13


Sensocon Digital Differential Pressure Gauge Modal A1011-13

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±50.00″ WC, ±12.5 kPa

Manufacturer:Sensocon USA

MPN:A1011-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±50.00″ WC, ±12.5 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±50.00″ WC||±12500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 50.0IN (12.5 KPA), 4-20 MA
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-02

 
 
BrandSensocon USA
Pressure Range+-1.00″ WC||+-250 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1011-02
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-02

Sensocon Digital Differential Pressure Gauge Modal A1011-02

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±1.00″ WC, ±250 Pa

Manufacturer:Sensocon USA

MPN:A1011-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±1.00″ WC, ±250 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±1.00″ WC||±250 Pa
  • Short Description:  DDIAL GAUGE, DIGITAL, ±0.50%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 1.0IN (250 PA), 4-20 MA
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-03

 
 
BrandSensocon USA
Pressure Range+-2.00″ WC||+-500 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
Dial TypeDry
MountingCenter Back Mount
Material of casingPlastic
Model Name/NumberA1011-03
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-03


Sensocon Digital Differential Pressure Gauge Modal A1011-03

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±2.00″ WC, ±500 Pa

Manufacturer:Sensocon USA

MPN:A1011-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±2.00″ WC, ±500 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±2.00″ WC||±500 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 2.0IN (500 PA), 4-20 MA
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1011-04

 
 
BrandSensocon USA
Pressure Range+-3.00″ WC||+-750 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
Dial TypeDry
Material of casingPlastic
Model Name/NumberA1011-04
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-04

Sensocon Digital Differential Pressure Gauge Modal A1011-04

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±3.00″ WC, ±750 Pa

Manufacturer:Sensocon USA

MPN:A1011-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±3.00″ WC, ±750 Pa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±3.00″ WC||±750 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital

PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 3.0IN (750 PA), 4-20 MA
Manufacturer:Sensocon USA
 

Sensocon Digital Differential Pressure Gauge Modal A1011-05

 
 
Minimum Order Quantity1 Piece
BrandSensocon USA
Pressure Range+-4.00″ WC||+-1000 Pa
UseHVAC Systems
Display TypeDigital
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size3/16″ NPT
Dial TypeDry
MountingCenter Back Mount
Model Name/NumberA1011-05
Weight1 lb 2 oz (510 g)
Country of OriginMade in India
PowerUniversal Power 24-240 VAC/VDC
Diameter5.00″
MeasurementInches of Water Column||Pascals
DirectionBi-Directional
FillingDry
DisplayLED or OLED Program Display
TypeSensocon Digital Differential Pressure Gauge Modal A1011-05


Sensocon Digital Differential Pressure Gauge Modal A1011-05

Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±4.00″ WC, ±1 kPa

Manufacturer:Sensocon USA

MPN:A1011-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

  • Accuracy:±0.50%
  • Connection:3/16″ NPT
  • Description:Digital Differential Pressure Gauge, 4-20 mA, ±0.50%, ±4.00″ WC, ±1 kPa
  • Dial Size:5.00″
  • Direction:Bi-Directional
  • Filling:Dry
  • Measurement:Inches of Water Column||Pascals
  • Mount:Center Back Mount
  • Range:    ±4.00″ WC||±1000 Pa
  • Short Description:  DIAL GAUGE, DIGITAL, ±0.50%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
  • Type:Digital


PRODUCT FAMILY FEATURES

  • Mounts in Industry Standard Holes
  • 1.6? (41 mm) Panel Depth
  • LED or OLED Program Display
  • Measures Flow & Velocity
  • Optional 4-20 mA output
  • Universal power 24-240 VAC/VDC
  • Two 8A SPDT Relays


MORE INFORMATION & RELATED DOCUMENTS


Family Description:


The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:    DISPLAY, 0.50%, 4.0IN (1.0 K PA), 4-20 MA
Manufacturer:Sensocon USA

Sensocon USA 211 Differential Pressure Transmiter, Uncategorized

Sensocon USA 211 Differential Pressure Transmiter

Nov 2, 2021 by admin 0 Comments

Sensocon USA 211-D001I-1 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D001I-1
Pressure Range0-1″
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)

Sensocon USA 211-D001I-1 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D002I-1 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D002I-1
Pressure Range0-2″
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ DegreeF

Sensocon USA 211-D002I-1 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

 

Sensocon USA 211-D004I-1 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model No.211-D002I-1
BrandSensocon USA
Pressure Range0-4″
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)

Sensocon USA SERIES 211-D004I-1 Differential Pressure Transmitte The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy

 

Sensocon USA 211-D006I-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D006I-3
Pressure Range0-6″
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F

Sensocon USA SERIES 211-D006I-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D010I-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D010I-3
Pressure Range0-10″
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F

Sensocon USA SERIES 211-D010I-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D020I-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D020I-3
Pressure Range0-20″
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year

Sensocon USA SERIES 211-D020I-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D040I-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D040I-3
Pressure Range0-40″
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ DegreeF

Sensocon USA 211-D040I-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D005P-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0-5 PSI
BrandSensocon USA
Model No.211-D005P-3
Housing MaterialABS Plastic
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year

Sensocon USA SERIES 211-D005P-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D010P-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
BrandSensocon USA
Model Number/Name211-D010P-3
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F

Sensocon USA 211-D010P-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D015P-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
BrandSensocon USA
Model Number/Name211-D015P-3
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)

Sensocon USA SERIES 211-D015P-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D250A-1 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
BrandSensocon USA
Model Number/Name211-D250A-1
Thermal Effect+/- 0.028% FS/ deg F
Stability+/- 0.25% FS/year
Output Signal4-20 mA, 2-wire
Loop Resistance250 @ 24 VDC
Power Supply12-30 VDC
Housing MaterialABS Plastic
Electrical ConnectionsScrew Terminals
Process ConnectionPush on connection for 1 /8″ I.D. tubing

Sensocon USA SERIES 211-D250A-1 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D500A-1 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D500A-1
Pressure Range0-500 PA
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)

Sensocon USA SERIES 211-D500A-1 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

 

Sensocon USA 211-D001K-1 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy1%
Measuring Range(mm)211-D001K-1
Output Type4 – 20 mA or 0 – 10 V
BrandSensocon USA
Pressure Range0-1 Kpa
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ DegreeF

Sensocon USA SERIES 211-D001K-1 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D100K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Measuring Range(mm)211-D100K-3
Pressure Range0-100 Kpa
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)

Sensocon USA SERIES 211-D100K-3 Differential Pressure Transmitter
The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D002K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D002K-3
Pressure Range0-2 Kpa
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V

Sensocon USA 211-D002K-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D003K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
BrandSensocon USA
Input Pressure0-3 Kpa
Model Number/Name211-D003K-3
Accuracy0.25%
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year

 

Sensocon USA SERIES 211-D003K-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

Sensocon USA 211-D005K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D005K-3
Pressure Range0-5 Kpa
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F

Sensocon USA 211-D005K-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D010K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
BrandSensocon USA
Model Number/Name211-D010K-3
Pressure Range0-10 Kpa
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)

Sensocon USA 211-D010K-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
 

Sensocon USA 211-D025K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
Measuring Range(mm)211-D025K-3
BrandSensocon USA
Pressure Range0-25 Kpa
Process ConnectionPush on connection for 1 /8″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F


Sensocon USA SERIES 211-D025K-3 Differential Pressure Transmitter
The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

Sensocon USA 211-D050K-3 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Accuracy0.25%
Size211-D050K-3
BrandSensocon USA
Pressure Range0-50 Kpa
Agency ApprovalsCE
Process ConnectionPush on connection for 3/16″ I.D. tubing
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.050%/ deg C)


Sensocon USA 211-D050K-3 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4 – 20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

Series 211 Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
BrandSensocon USA
Model Number/NameSeries 211
Agency ApprovalsCE
Electrical ConnectionsScrew Terminals
Housing MaterialABS Plastic
Power Supply12-30 VDC
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2 wire or 0-10V
Stability+/- 0.25% FS/year

Series 211 Differential Pressure Transmitter The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4-20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.

Model

Pressure RangeAccuracy
211-D001I-10-1″1%
211-D002I-10-2″1%
211-D004I-10-4″1%
211-D006I-30-6″0.25%
211-D010I-30-10″0.25%
211-D020I-30-20″0.25%
211-D040I-30-40″0.25%
211-D005P-30-5 PSI0.25%
211-D010P-30-10 PSI0.25%
211-D015P-30-15 PSI0.25%
211-D250A-10-250 Pa1%
211-D500A-10-500 Pa1%
211-D001K-10-1 kPa1%
211-D002K-30-2 kPa0.25%
211-D003K-30-3 kPa0.25%
211-D005K-30-5 kPa0.25%
211-D010K-30-10 kPa0.25%
211-D025K-30-25 kPa0.25%
211-D050K-30-50 kPa0.25%
211-D100K-30-100 kPa0.25%


*For 0-10 V output, add -V to the end of the part number. Consult factory for other calibration ranges including zero center ranges.

 

Dwyer Stainless Steel Pitot Tube Wholesalers, Uncategorized

Dwyer Stainless Steel Pitot Tube Wholesalers

Nov 2, 2021 by admin 0 Comments

Dwyer Stainless Steel Pitot Tube

 
 
Model Name/Number160 S
MaterialSS 304
Pressure ConnectionFemale NPT connections
Size1/8 inch
Temperature1500 degree F
Diameter4 to 432 inches
BrandDwyer USA


Dwyer Stainless Steel Pitot Tube is ideal to be used in the industrial operations with our precision manometers and Air Velocity Gages. Various Standard Sizes Are Available For Use in Ducts.

Features:

  • No Calibration Needed.
  • Precisely located, burr-free static Pressure Holes.
  • Hemispherical tip design, Best for Accuracy if imperfectly Aligned and Nearly Impossible to Damage.
  • Long lasting construction.
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included.
  • Use 1/8″ Models in ducts as small as 4″ and 5/16″ Models in Ducts 10″ or larger.
  • Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple.
  • ASME Design Meets AMCA & ASHRAE Specifications.


Applications:

  • Monitor or Control Air Velocity or Air Flow When Combined With Differential Pressure Gage, Switch, Or Transmitter


Details:

ModelDescription
160-12Stainless steel Pitot tube, 5/16″ dia., 12-5/8″ insertion length.
160-120Stainless steel Pitot tube, 5/16″ dia., 120″ insertion length.
160-168Stainless steel Pitot tube, 5/16″ dia., 168″ insertion length.
160-18Stainless steel Pitot tube, 5/16″ dia., 18-5/8″ insertion length.
160-216Stainless steel Pitot tube, 5/16″ dia., 216″ insertion length.
160-24Stainless steel Pitot tube, 5/16″ dia., 24-5/8″ insertion length.
160-36Stainless steel Pitot tube, 5/16″ dia., 36-5/8″ insertion length.
160-48Stainless steel Pitot tube, 5/16″ dia., 48-5/8″ insertion length.
160-60Stainless steel Pitot tube, 5/16″ dia., 60-5/8″ insertion length.
160-8Stainless steel Pitot tube, 5/16″ dia., 8-5/8″ insertion length.
160-96Stainless steel Pitot tube, 5/16″ dia., 96″ insertion length.
160-KITKit containing 160-18, 160-24, 160-36, 160-48, and FREE carrying case ($150 value)
160-UUniversal Pitot tube for permanent installation and connection to metal tubing, make any length with 3/4″ sch. 40 pipe, 3/4″ to 1/2″ reducing bushing and 1/4″ metal tubing.
166-12Pocket size Pitot tube, 1/8″ dia., 12″ insertion length, 3″ tip.
166-12-CFPocket size Pitot tube, 1/8″ dia., 12″ insertion length, 3″ tip, with 1/8″ male NPT compression fitting.
166-6Pocket size Pitot tube, 1/8″ dia., 6″ insertion length, 3″ tip.
166-6-CFPocket size Pitot tube, 1/8″ dia., 6″ insertion length, 3″ tip, with 1/8″ male NPT compression fitting.
167-12Pocket size Pitot tube, 1/8″ dia., 12″ insertion length, 1-1/2″ tip.
167-12-CFPocket size Pitot tube, 1/8″ dia., 12″ insertion length, 1-1/2″ tip, with 1/8″ male NPT compression fitting.
167-6Pocket size Pitot tube, 1/8″ dia., 6″ insertion length, 1-1/2″ tip.
167-6-CFPocket size Pitot tube, 1/8″ dia., 6″ insertion length, 1-1/2″ tip, with 1/8″ male NPT compression fitting.

Dwyer 160-96 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-96
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length96″

Dwyer 160-8 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-8
  • SS Pitot Tube w/Stiffener,5/16″ dia.,96″insertion
  • Order #: 160-96
  • Mfg #: 160-96

 

 

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 96”” Insertion Length
 

Dwyer 160-18 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-18
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length18-5/8″

Dwyer 160-18 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-18
  • SS Pitot Tube,5/16″dia.,18 5/8″ insertion
  • Order #: 160-18
  • Mfg #: 160-18 

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 18-5/8″ Insertion Length

Dwyer 160-168 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-168
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length216″


Dwyer 160-168 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-168
  • Stainless Steel Pitot Tube 5/16″ Diameter, 168″ Length
  • Order #: 160-168
  • Mfg #: 160-168

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks


Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 168″ Insertion Length

Dwyer 160-120 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-120
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length120″

Dwyer 160-120 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-120
  • Stainless Steel Pitot Tube 5/16″ diameter, 120″ length
  • Order #: 160-120
  • Mfg #: 160-120

 

 


Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 120″ Insertion Length

Dwyer 160-8 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-8
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length8-5/8″

Dwyer 160-8 Stainless Steel Pitot Tube

  • Dwyer Instruments 160-8
  • Stainless Steel Pitot Tube 5/16″ Diameter, 8-5/8″ Length
  • Order #: 160-8
  • Mfg #: 160-8

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 8-5/8″ Insertion Length
 

Dwyer 160-60 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-60
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ dia.
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ dia.
BrandDWYER USA
Country of OriginMade in India
Insertion Length60-5/8″
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter

Dwyer 160-60 Stainless Steel Pitot Tube

  • Dwyer Instruments 160-60
  • SS Pitot Tube,5/16″dia.,60-5/8″ Insertion
  • Order #: 160-60
  • Mfg #: 160-60

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 60-5/8″ insertion length

Dwyer 160-48 Stainless Steel Pitot Tube
 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-48
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length48-5/8″

Dwyer 160-48 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-48
  • SS Pitot Tube,5/16″dia.,48-5/8″ insertion
  • Order #: 160-48
  • Mfg #: 160-48

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 48-5/8″ insertion length

Dwyer 160-36 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-36
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length36-5/8″

Dwyer 160-36 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-36
  • SS Pitot Tube,5/16″dia.,36-5/8″ insertion
  • Order #: 160-36
  • Mfg #: 160-36

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 36-5/8″ Insertion Length

Dwyer 160-24 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-24
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″ Dia
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″ Dia
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length24-5/8″

Dwyer 160-24 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-24
  • SS Pitot Tube,5/16″dia.,24 5/8″ insertion
  • Order #: 160-24
  • Mfg #: 160-24

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 24-5/8″ insertion length

Dwyer 160-216 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-216
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length216″

Dwyer 160-216 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-216
  • Stainless Steel Pitot Tube 5/16″ Diameter, 216″ Length
  • Order #: 160-216
  • Mfg #: 160-216

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 216″ Insertion Length

Dwyer Telescoping Stainless Steel Pitot Tube

 
 
MaterialStainless Steel
Size12.5 x 6.25 x 1.75 inches
Weight453.5 gm
Diameter1.8 inches
Tube Diameter1.8 inches
Flow Coefficient1.0
BrandDWYER


Telescoping Stainless Steel Pitot Tube is a Unique Air Flow Sensor which can Quickly and Easily be Adjusted for any Duct inersertion length.

Features/Benefits:

  • Adjustable length can replace up to 5 Fixed Length Pitot Tubes.
  • Stainless Steel construction resists corrosion


Applications:

  • Monitor or Control Air Velocity or Air Flow When Combined with Differential Pressure Gage, Switch or Transmitter Where varying lengths are needed.

Dwyer 160-12 Stainless Steel Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 160-12
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter5/16″
Product TypeStainless Steel Pitot Tube
Tube Diameter5/16″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12-5/8″

Dwyer 160-12 Stainless Steel Pitot Tube.

  • Dwyer Instruments 160-12
  • SS Pitot Tube,5/16″dia.,12-5/8″ insertion length
  • Order #: 160-12
  • Mfg #: 160-12

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes Are Constructed From Corrosion Resistant Stainless Steel For A Lifetime Of Service. ASME Design Meets AMCA and ASHRAE Specifications For Maximum Accuracy Over a Wide Variety Of Flow Conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE Design Needs no Calibration! Permanent, Stamped Insertion Depth Graduations On Sides of 160 Series Facilitate Accurate Positioning. Static Pressure Port is Parallel to Sensing Tube Allowing Quick, Easy Alignment of Tube With Air Flow. Low Sensitivity to Misalignment Gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

  • Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely Located, Burr-Free Static Pressure Holes
  • Hemispherical Tip Design, Best For Accuracy If Imperfectly Aligned And Nearly Impossible To Damage
  • Long Lasting 304 Stainless Steel Construction
  • Silver Soldered Connections For Leak-Proof Operation
  • ASME Design Meets AMCA And ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated To 1500 F
  • Extended Static Connection Helps Guide Tip Within Recommended 15 Degrees Of Air Flow Direction
  • Inch Graduations On Sides Of 160 Series To Quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts And Instructions Included
  • Use 1/8″ Models in Ducts As Small as 4″, 5/16″ Models in Ducts 10″ Or Larger
  • Optional Mounting Gland Or Split Flange Make Permanent Installation Fast And Simple
  • 5/16″ Diameter
  • 12-5/8″ insertion length

Dwyer 160 Kit Pitot Tube Set Of Standard Tubes

 
 
Usage/ApplicationLaboratory
Model Name/NumberDwyer 160
MaterialStainless Steel
Size5/16″
Product TypeDwyer 160 Kit Pitot Tube Set Of Standard Tubes
Diameter5/16″
I Deal InNew Only
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Item Weight14.00 Pounds
Part Number160-KIT

Dwyer 160 Kit Pitot Tube Set Of Standard Tubes.

Applications: 

  • Pitot Tube Set of Standard Tubes
  • HVAC
  • Industrial & Commercial
  • Residential

The Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”, 36”, and 48” Dwyer Pitot tubes. These Pitot Tubes are Constructed out of a Durable Stainless steel with etched insertion depth graduations and silver soldered connections to help prevent leaks. They feature a low sensitivity to misalignment up to 15 degrees, require no calibration due to their ASHRAE tip design, and are rated up to 1500°F (815.5°C).

Manufacturer Specs

Dwyer 160-KIT Pitot Tube Set of Standard Tubes Specifications

Model in Kit        Insertion Length

  • 160-18          18-5/8??
  • 160-24          24-5/8??
  • 160-36          36-5/8??
  • 160-48          48-5/8??
 

Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case

 
 
BrandDwyer USA
Model Name/NumberDwyer 160-KIT Pitot Tube Kit
Usage/ApplicationIndustrial
MaterialStainless Steel
Weight14.00 Pounds
Diameter5/16″
Product TypeDwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case
Tube Diameter5/16″
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Part Number160-KIT

Dwyer 160-KIT Pitot Tube Kit Containing 160-18,160-24,160-36,160-48 and Carrying Case

Applications 

  • Pitot Tube Set of Standard Tubes
  • HVAC
  • Industrial & Commercial
  • Residential

The Dwyer 160-KIT Pitot Tube Set of Standard Tubes includes 18”, 24”,36”,and 48” Dwyer Pitot Tubes.These Pitot Tubes are Constructed out of a Durable Stainless Steel With Etched insertion Depth Graduations and silver Soldered Connections to help prevent leaks.They Feature a low Sensitivity to Misalignment up to 15 degrees, require no Calibration due to their ASHRAE tip design,and are rated up to 1500°F (815.5°C).

Manufacturer Specs

Dwyer 160-KIT Pitot Tube Set of Standard Tubes Specifications

Model in Kit    Insertion Length

  • 160-18   18-5/8”
  • 160-24   24-5/8”
  • 160-36   36-5/8”
  • 160-48   48-5/8”

SPECIFICATION :

  • Brand:Dwyer USA
  • Model No:160-KIT
  • Our Model No:160KIT
  • Condition:NEW

KEY FEATURES :

  • Insertion Lengths:18-5/8″,24-5/8″,36-5/8″,48-5/8″
  • No Calibration Needed
  • Precisely located,burr-free static pressure holes
  • Hemispherical Tip Design,Best For Accuracy if Imperfectly Aligned and Nearly Impossible To Damage
  • Long lasting 304 SS Construction
  • Silver soldered connections for leak-proof operation
  • Extended Static Connection Helps Guide Tip Within Recommended 15° of Air Flow Direction
  • Inch Graduations on Sides of 160 Series to quickly Determine Exact insertion depth
  • Dwyer Air Velocity Calculator,Direct Reading Flow Charts and instructions included
  • Use 1/8″ Models in Ducts as Small as 4″,5/16″ Models in Ducts 10″ or Larger
  • Optional Mounting Gland of Split Flange Make Permanent Installation Fast and Simple Sold Separately
  • Meets ASME “Fluid Meters” 6th ed.ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999,and British Standard 1042
  • Includes Carrying Case

DETAILS :

The Dwyer 160-KIT Stainless Steel Pitot Tubes are Constructed From Corrosion Resistant Stainless Steel With Permanently etched insertion Depth Graduations for a Lifetime of Service.The Static Pressure Port is Parallel to the Sensing Tube to allow Quick,Easy Alignment of The Tube With Air Flow.The 160KIT has Probes With Insertion lengths of 18-5/8″,24-5/8″,36-5/8″,and 48-5/8″

INCLUDED

  • 1-18″ Pitot Tube
  • 1-24″ Pitot Tube
  • 1-36″ Pitot Tube
  • 1-48″ Pitot Tube
  • 1-Carrying Case

RELATED PRODUCTS

MODEL       DESCRIPTION

  • 160-12-CF-Dwyer 160-12-CF SS Pitot Tube,12-5/8″ Insertion Length,5/16″ Dia.Compression Fitting
  • 160-12-Dwyer 160-12 Stainless Steel Pitot Tube,12-5/8″ Insertion Length,5/16″ Diameter
  • 160-18-Dwyer 160-18 Stainless Steel Pitot Tube,18-5/8″ Insertion Length,5/16″ Diameter
  • 160-24-CF-Dwyer 160-24-CF SS Pitot Tube,24-5/8″ Insertion Length,5/16″ Dia.Compression Fitting
  • 160-24-Dwyer 160-24 Stainless Steel Pitot Tube,24-5/8″ Insertion Length,5/16″ Diameter
  • 160-36-Dwyer 160-36 Stainless Steel Pitot Tube,36-5/8″ Insertion Length,5/16″ Diameter
  • 160-48-Dwyer 160-48 Stainless Steel Pitot Tube,48-5/8″ Insertion Length,5/16″ Diameter
  • 160-60-Dwyer 160-60 Stainless Steel Pitot Tube,60-5/8″ Insertion Length,5/16″ Diameter
  • 160-8-Dwyer 160-8 Stainless Steel Pitot Tube,8-5/8″ Insertion Length,5/16″ Diameter
 

Dwyer 166-12 Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 166-12 Pocket
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-12 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip3″

Dwyer 166-12 Pocket Size Pitot Tube.

  • Dwyer Instruments 166-12
  • Pocket-Size Pitot Tube,12″ Insertion Tube/1/8″Diameter
  • Order #: 166-12
  • Mfg #: 166-12

Ideal For Use With Our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability: Ships in 5-6 Weeks 

Product Highlights

  • No calibration needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of “1
  • 5/16″ models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional mounting gland or split flange make permanent installation fast and simple
  • Pocket Size Pitot Tube
  • 1/8″ diameter
  • 12″ insertion length
  • 3″ tip

Dwyer 166-12 Stainless Steel Pitot Tube,12″ Insertion Length,1/8″ Diameter,3″ Tip

 
 
Model Name/NumberDwyer 166-12
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-12 Stainless Steel Pitot Tube,12″ Insertion Length,1/8″ Diameter,3″ Tip
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Insertion Length12″
Tip3″
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
MODELDwyer 166-12

Dwyer 166-12 Stainless Steel Pitot Tube,12″ Insertion Length, 1/8″ Diameter,3″ Tip

  • Brand:Dwyer USA
  • Model No:166-12
  • Our Model No:166-12 DWYER USA
  • Condition:NEW

KEY FEATURES :

  • Insertion Length: 12″
  • Tip: 3″
  • No calibration needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 SS construction
  • Silver soldered connections for leak-proof operation
  • Coefficient of “1”
  • 5/16″ models rated to 1500°F
  • Extended static connection helps guide tip within recommended 15° of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional mounting gland of split flange make permanent installation fast and simple (sold separately)
  • Meets ASME “Fluid Meters” 6th ed., ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999, and British Standard 1042

DETAILS :

The Dwyer 166-12 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The 16612 has a probe insertion length of 12″ and a tip of 3 inches. A universal model fits the user supplied 3/4″ schedule 40 pipe in any length.

RELATED PRODUCTS

MODEL       DESCRIPTION

  • 166-12-CF-Dwyer 166-12-CF SS Pitot Tube, 12″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
  • 166-6-CF-Dwyer 166-6-CF SS Pitot Tube, 6″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
  • 166-6-Dwyer 166-6 Stainless Steel Pitot Tube, 6″ Insertion Length, 1/8″ Diameter, 3″ Tip.
 

Dwyer Instruments 166-12-CF Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/Number166-12-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer Instruments 166-12-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip1-1/2″
Male NPT Compression Fitting1/8″

Dwyer Instruments  166-12-CF Pocket Size Pitot Tube

  • Pocket Size Pitot Tube,1/8″Dia.12″ Length,1/8″ Male NPT
  • Order #: 166-12-CF
  • Mfg #: 166-12-CF

Ideal for Use With our Precision Manometers and Air Velocity Gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of “1
  • 5/16″ models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly Determine Exact Insertion Depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ Models in Ducts as Small as 4″, 5/16″ Models in Ducts 10″ or Larger
  • Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple
  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 12″ Insertion Length
  • 1-1/2″ Tip
  • 1/8″ Male NPT Compression Fitting
 

Dwyer 166-6 Stainless Steel Pitot Tube 6″ Insertion Length 1/8″ Diameter 3″ Tip

 
 
BrandDwyer USA
Model Name/NumberDwyer 166-6
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-6 Stainless Steel Pitot Tube 6″ Insertion Length 1/8″ Diameter 3″ Tip
Tube Diameter1/8″
Country of OriginMade in India
Tip3″
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
MODELDwyer 166-6

Dwyer 166-6 Stainless Steel Pitot Tube 6″ Insertion Length 1/8″ Diameter 3″ Tip

  • Brand:Dwyer USA
  • Model No:166-6
  • Our Model No:166-6 DWYER USA
  • Condition:NEW

KEY FEATURES :

  • Insertion Length: 6″
  • Tip: 3″
  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 SS construction
  • Silver soldered connections for leak-proof operation
  • Coefficient of “1”
  • 5/16″ models rated to 1500°F
  • Extended static connection helps guide tip within recommended 15° of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional mounting gland of split flange make permanent installation fast and simple (sold separately)
  • Meets ASME “Fluid Meters” 6th ed., ANSI/AMCA 210-99, ANSI/ASHRAE 51/1999, and British Standard 1042

DETAILS :

The Dwyer 166-6 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The 1666 has a probe insertion length of 6″ and a tip of 3 inches. A universal model fits the user supplied 3/4″ schedule 40 pipe in any length.

RELATED PRODUCTS


MODEL       DESCRIPTION

  • 166-12-CF-Dwyer 166-12-CF SS Pitot Tube, 12″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
  • 166-12-Dwyer 166-12 Stainless Steel Pitot Tube, 12″ Insertion Length, 1/8″ Diameter, 3″ Tip.
  • 166-6-CF-Dwyer 166-6-CF SS Pitot Tube, 6″ Insertion Length, 1/8″ Dia., Compression Fitting, 3″ Tip.
 

Dwyer 167-6-CF Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-6-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-6-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
Tip1-1/2″
NPT Compression FittingWith 1/8″ Male

Dwyer 167-6-CF Pocket Size Pitot Tube



  • Dwyer Instruments 167-6-CF
  • Stainless Steel Pitot Tube 1/8″ Diameter, 1/8″ Male NPT
  • Order #: 167-6-CF
  • Mfg #: 167-6-CF

Ideal for Use With Our Precision Manometers and Air Velocity gages, Dwyer Pitot Tubes Are constructed From Corrosion Resistant Stainless Steel For a Lifetime Of Service. ASME design meets AMCA and ASHRAE Specifications for Maximum Accuracy over a wide Variety of Flow conditions. No Correction Factors Required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.



Availability: Ships in 5-6 Weeks



Product Highlights


  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″Insertion Length
  • 1-1/2″Tip
  • With 1/8″Male NPT Compression Fitting
 

Dwyer 167-6 Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-6
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-6 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDwyer USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
Tip1-1/2″

Dwyer 167-6 Pocket Size Pitot Tube

 

  • Dwyer Instruments 167-6
  • Stainless Steel Pitot Tube 1/8″ Dia., 6″ Length, 1.5″ Tip
  • Order #: 167-6
  • Mfg #: 167-6

 

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

 

Availability: Ships in 6-7 Weeks

 

Product Highlights

  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″ Insertion Length
  • 1-1/2″ Tip

 

 

Dwyer 167-12-CF Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-12-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-12-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip1-1/2″
NPT Compression FittingWith 1/8″ Male

Dwyer 167-12-CF Pocket Size Pitot Tube

  • Dwyer Instruments 167-12-CF
  • Stainless Steel Pitot Tube 1/8″ Diameter, 1/8″ Male NPT
  • Order #: 167-12-CF
  • Mfg #: 167-12-CF

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction Factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several Convenient mounting options are available for Permanent Installations.

Availability: Ships in 6-7 Weeks

Product Highlights

  • Pocket Size Pitot tube
  • 1/8″Diameter
  • 12″ Insertion Length
  • 1-1/2″ Tip
  • with 1/8″ Male NPT Compression Fitting

Dwyer 167-12 Pocket Size Pitot Tube

 
 
Model Name/NumberDwyer 167-12
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 167-12 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length12″
Tip1-1/2″

Dwyer 167-12 Pocket Size Pitot Tube

  • Dwyer Instruments 167-12
  • Stainless Steel Pitot Tube 1/8″ Dia., 12″ Length, 1.5″ Tip
  • Order #: 167-12
  • Mfg #: 167-12

Ideal for Use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″diameter or as large as 36 ft. diameter. A universal model fits user supplied 3/4″schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability: Ships in 5-7 Weeks 

Product Highlights

  • Pocket Size Pitot Tube
  • 1/8″Diameter
  • 12″ Insertion Length
  • 1-1/2″ Tip

Dwyer 166-6-CF Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 166-6-CF
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-6-CF Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6”
Tip3”
NPT Compression Fitting1/8″ Male

Dwyer 166-6-CF Pocket Size Pitot Tube

  • Dwyer Instruments 166-6-CF
  • SS Pocket Size Pitot Tube,6″ Insertion,3″Tip,w/1/8″NPTM
  • Order #: 166-6-CF
  • Mfg #: 166-6-CF

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of “1
  • 5/16″ models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to Quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, Direct Reading Flow Charts and Instructions Included
  • Use 1/8″ models in ducts as small as 4″, 5/16″ models in ducts 10″ or larger
  • Optional Mounting Gland or Split Flange Make Permanent Installation Fast and Simple
  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″ Insertion Length
  • 3″ Tip
  • 1/8″ Male NPT Compression Fitting
 

Dwyer 166-6 Pocket Size Pitot Tube

 
 
Minimum Order Quantity1 Number
Model Name/NumberDwyer 166-6
Usage/ApplicationIndustrial
MaterialStainless Steel
Diameter1/8″
Product TypeDwyer 166-6 Pocket Size Pitot Tube
Tube Diameter1/8″
BrandDWYER USA
Country of OriginMade in India
Product ApplicationsMonitor,Control Air Velocity,Air Flow When Combined With D.P Gage,Switch,Transmitter
Insertion Length6″
Tip3″

Dwyer 166-6 Pocket Size Pitot Tube

  • Dwyer Instruments 166-6
  • Pocket-Size Pitot Tube, 1/8″dia 6″ Insertion Length
  • Order #: 166-6
  • Mfg #: 166-6

Ideal for use with our Precision Manometers and air velocity gages, Dwyer Pitot Tubes are Constructed From Corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4″ dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4″ schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.

Availability: Ships in 5-6 Weeks

Product Highlights

  • No Calibration Needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and Nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for Leak-Proof Operation
  • ASME design meets AMCA and ASHRAE Specification
  • Coefficient of “1
  • 5/16″ Models Rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8″ Models in Ducts as Small as 4″, 5/16″ Models in Ducts 10″ or Larger
  • Optional mounting gland or split flange make permanent installation fast and simple
  • Pocket Size Pitot Tube
  • 1/8″ Diameter
  • 6″ Insertion Length
  • 3″ Tip

Uncategorized

Series DPT Digital Pressure Transmitter With Switches Wholesaler India.

Nov 2, 2021 by admin 0 Comments

Series DPT Digital Pressure Transmitter With Switches

 
 
Minimum Order Quantity1 Number
Usage/ApplicationHydraulics and pneumatics
Model Name/NumberSeries DPT
BrandDWYER USA
Voltage4-20 mA AND 0-10 VDC
Product Weight7 oz (0.2 kg).
Country of OriginMade in India

Series DPT Digital Pressure Transmitter With Switches

Two Solid State Switches, LED Display

The Series DPT Digital Pressure Transmitter with Switches combines a large, 14-segment LED display with two programmable solid state switches into one compact unit. A unique, 3-way rotating design allows the DPT to meet specific installation requirements without any retrofitting. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. Large, ergonomically designed push buttons allow for quick/easy programming and thin-film piezoresistive sensor technology guarantees long-term reliability and stability.

Calibration Option available under Accessories.

Product Applications
  • Calibration
  • Hydraulics and pneumatics
  • Machine tools
  • Compressors and pumps
  • Machine building


ModelDescription
DPT-A00Digital pressure transmitter, range -14.5 to 0 psig, 4-20 mA output.
DPT-A01Digital pressure transmitter, range 0 to 15 psig, 4-20 mA output.
DPT-A02Digital pressure transmitter, range 0 to 25 psig, 4-20 mA output.
DPT-A03Digital pressure transmitter, range 0 to 30 psig, 4-20 mA output.
DPT-A04Digital pressure transmitter, range 0 to 50 psig, 4-20 mA output.
DPT-A05Digital pressure transmitter, range 0 to 100 psig, 4-20 mA output.
DPT-A06Digital pressure transmitter, range 0 to 160 psig, 4-20 mA output.
DPT-A07Digital pressure transmitter, range 0 to 200 psig, 4-20 mA output.
DPT-A08Digital pressure transmitter, range 0 to 300 psig, 4-20 mA output.
DPT-A09Digital pressure transmitter, range 0 to 500 psig, 4-20 mA output.
DPT-A10Digital pressure transmitter, range 0 to 1000 psig, 4-20 mA output.
DPT-V00Digital pressure transmitter, range -14.5 to 0 psig, 0-10 VDC output.
DPT-V01Digital pressure transmitter, range 0 to 15 psig, 0-10 VDC output.
DPT-V02Digital pressure transmitter, range 0 to 25 psig, 0-10 VDC output.
DPT-V03Digital pressure transmitter, range 0 to 30 psig, 0-10 VDC output.
DPT-V04Digital pressure transmitter, range 0 to 50 psig, 0-10 VDC output.
DPT-V05Digital pressure transmitter, range 0 to 100 psig, 0-10 VDC output.
DPT-V06Digital pressure transmitter, range 0 to 160 psig, 0-10 VDC output.
DPT-V08Digital pressure transmitter, range 0 to 300 psig, 0-10 VDC output.
DPT-V09Digital pressure transmitter, range 0 to 500 psig, 0-10 VDC output.
DPT-V10Digital pressure transmitter, range 0 to 1000 psig, 0-10 VDC output.

Specifications
Service:Compatible gases, liquids or vapors.Wetted Materials:Pressure connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH for ranges above 150 psi).Housing:316 L lower body, heat and chemical resistant fiberglass reinforced plastic (PBT) plastic head, TPE-E keyboard, PC display window.Accuracy:1.0% F.S. (includes non-linearity, hysteresis, zero point).Pressure Limit:See Catalog page.Temperature Limits:32 to 176°F (0 to 80°C).Process Connections:1/4″ male NPT.Display:Red LED 4-digit (0.35″ H digits).Weight:7 oz (0.2 kg).SWITCH SPECIFICATIONS:Switch Type:PNP.Electrical Rating:250 mA.Electrical Connections:M 12×1, 5-pin.
 

Dwyer DPT-A00 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompressors and Pumps
Model Name/NumberDPT-A00
BrandDwyer USA
Voltage4-20 mA AND 0-10 VDC
Product Weight7 oz (0.2 kg).
Output Type4-20 mA AND 0-10 VDC
Country of OriginMade in India


Dwyer DPT-A00 Digital Pressure Transmitter With Switch

Range: -14.5 to 0 psig, Output: 4 to20 mABrand #
Dwyer Part # DPT-A00
Condition Brand New
Availability : Contact Us

Digital Pressure Transmitter, Range -14.5 to 0 psig, 4-20 mA output.

The Series DPT Digital Pressure Transmitter with Switches combines a large, 14-segment LED display with two programmable solid state switches into one compact unit. A unique, 3-way rotating design allows the DPT to meet specific installation requirements without any retrofitting. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. Large, ergonomically designed push buttons allow for quick/easy programming and thin-film piezoresistive sensor technology guarantees long-term reliability and stability.

Product Applications:

  • Calibration
  • Hydraulics and pneumatics
  • Machine tools
  • Compressors and pumps
  • Machine building

Features:

  • Dual PNP solid state switches
  • 14-segment red LED display
  • User-friendly, intuitive 3-key operation
  • Rotating design:
    • 330° display rotation
    • 180° display electronic rotation
ServiceCompatible gases, liquids or vapors.
Wetted MaterialsPressure connection: 316 L SS;
Pressure sensor: 316 L SS (13-8 PH for ranges above 150 psi).
Housing316 L lower body, heat and chemical resistant fiberglass reinforced plastic (PBT) plastic head, TPE-E keyboard, PC display window.
Accuracy1.0% F.S. (includes non-linearity, hysteresis, zero point).
Temperature Limits32 to 176°F.
Process Connections1/4″ male NPT.
DisplayRed LED 4-digit (0.35″ H digits).
Switch specifications
Switch TypePNP.
Electrical Rating250 mA.
Electrical ConnectionsM 12×1, 5-pin.
Mounting OrientationMount in any position.
Transmitter specifications
Temperature Limits32 to 176°F.
Thermal Effect0.2% FS / 10k.
Power Requirements15 to 35 VDC.
Output Signal4 to 20 mA
Loop Resistance< = 0.5k
Power Consumption< = 100 mA.
Electrical ConnectionsM 12×1, 5-pin.
Enclosure RatingIP67.
Agency ApprovalsCE.

Dwyer DPT-A01 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompressors And Pumps
Model Name/NumberDPT-A01
BrandDwyer USA
Voltage4-20 mA AND 0-10 VDC
Product Weight7 oz (0.2 kg).
Output Type4-20 mA AND 0-10 VDC
Country of OriginMade in India


Dwyer DPT-A01 Digital Pressure Transmitter With Switch.

  • Range : 0 to 15 psig, Output: 4 to20 mA
  • Brand : Dwyer USA
  • Part : DPT-A01
  • Condition : Brand New
  • Availability : Contact Us


Digital Pressure Transmitter, range 0 to 15 psig, 4-20 mA output.

The Series DPT Digital Pressure Transmitter with Switches Combines a large, 14-segment LED Display With Two Programmable solid state switches into one compact unit. A unique, 3-way rotating design allows the DPT to meet specific installation requirements without any retrofitting. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. Large, ergonomically designed push buttons allow for quick/easy programming and thin-film piezoresistive sensor technology guarantees long-term reliability and stability.


Product Applications:

  • Calibration
  • Hydraulics and pneumatics
  • Machine tools
  • Compressors and pumps
  • Machine building


Features:

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating Design:
    • 330° Display Rotation
    • 180° Display Electronic Rotation

 

ServiceCompatible gases, liquids or vapors.
Wetted MaterialsPressure connection: 316 L SS;
Pressure sensor: 316 L SS (13-8 PH for ranges above 150 psi).
Housing316 L lower body, heat and chemical resistant fiberglass reinforced plastic (PBT) plastic head, TPE-E keyboard, PC display window.
Accuracy1.0% F.S. (includes non-linearity, hysteresis, zero point).
Temperature Limits32 to 176°F.
Process Connections1/4″ male NPT.
DisplayRed LED 4-digit (0.35″ H digits).
Switch specifications
Switch TypePNP.
Electrical Rating250 mA.
Electrical ConnectionsM 12×1, 5-pin.
Mounting OrientationMount in any position.
Transmitter specifications
Temperature Limits32 to 176°F.
Thermal Effect0.2% FS / 10k.
Power Requirements15 to 35 VDC.
Output Signal4 to 20 mA
Loop Resistance< = 0.5k
Power Consumption< = 100 mA.
Electrical ConnectionsM 12×1, 5-pin.
Enclosure RatingIP67.
Agency ApprovalsCE.

Dwyer DPT-A02 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationMachine Building
Model Name/NumberDPT-A02
BrandDwyer USA
Voltage4-20 mA AND 0-10 VDC
Product Weight7 oz (0.2 kg).
Output Type4-20 mA AND 0-10 VDC
Part TypeDwyer USA DPT
Country of OriginMade in India


Dwyer DPT-A02 Digital Pressure Transmitter With Switch.

  • Range: 0 to 25 psig, Output: 4 to20 mA
  • Brand # Dwyer
  • Part # DPT-A02
  • Condition # Brand New
  • Availability:Contact Us

 

Digital Pressure Transmitter, Range 0 to 25 psig, 4-20 mA output.

The Series DPT Digital Pressure Transmitter with Switches combines a large, 14-segment LED display with two programmable solid state switches into one compact unit. A unique, 3-way rotating design allows the DPT to meet specific installation requirements without any retrofitting. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. Large, ergonomically designed push buttons allow for quick/easy programming and thin-film piezoresistive sensor technology guarantees long-term reliability and stability.


Product Applications:

  • Calibration
  • Hydraulics and pneumatics
  • Machine tools
  • Compressors and pumps
  • Machine building


Features:

  • Dual PNP solid state switches
  • 14-segment red LED display
  • User-friendly, intuitive 3-key operation
  • Rotating Design:
    • 330° Display Rotation
    • 180° Display Electronic Rotation
ServiceCompatible gases, liquids or vapors.
Wetted MaterialsPressure connection: 316 L SS;
Pressure sensor: 316 L SS (13-8 PH for ranges above 150 psi).
Housing316 L lower body, heat and chemical resistant fiberglass reinforced plastic (PBT) plastic head, TPE-E keyboard, PC display window.
Accuracy1.0% F.S. (includes non-linearity, hysteresis, zero point).
Temperature Limits32 to 176°F.
Process Connections1/4″ male NPT.
DisplayRed LED 4-digit (0.35″ H digits).
Switch specifications
Switch TypePNP.
Electrical Rating250 mA.
Electrical ConnectionsM 12×1, 5-pin.
Mounting OrientationMount in any position.
Transmitter specifications
Temperature Limits32 to 176°F.
Thermal Effect0.2% FS / 10k.
Power Requirements15 to 35 VDC.
Output Signal4 to 20 mA
Loop Resistance< = 0.5k
Power Consumption< = 100 mA.
Electrical ConnectionsM 12×1, 5-pin.
Enclosure RatingIP67.
Agency ApprovalsCE.

Dwyer DPT-A03 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompressors and Pumps
Model Name/NumberDwyer DPT-A03
BrandDwyer USA
Voltage4-20 mA output.
Operating Range0 to 30 psig
Product Weight7 oz (0.2 kg)
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A03
Country of OriginMade in India

Dwyer DPT-A03 Digital Pressure Transmitter With Switch

  • Range: 0 to 30 psig, 4-20 mA output.
  • Dwyer Part # DPT-A03
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 30 psig, 4-20 mA output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-A04 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-A04
BrandDwyer USA
Voltage4-20 mA output.
Operating Range0 to 50 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A04
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A04
Country of OriginMade in India

Dwyer DPT-A04 Digital Pressure Transmitter With Switch

  • Range: 0 to 50 psig, 4-20 mA output.
  • Dwyer Part # DPT-A04
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 50 psig, 4-20 mA output..

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Dwyer DPT-A05 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-A05
BrandDwyer USA
Voltage4-20 mA output.
Operating Range0 to 100 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A05
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A05
Country of OriginMade in India

Dwyer DPT-A05 Digital Pressure Transmitter With Switch

  • Range: 0 to 100 psig, 4-20 mA
  • Dwyer Part # DPT-A05
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 100 psig, 4-20 mA

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Dwyer DPT-A06 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationHydraulics And Pneumatics
Model Name/NumberDwyer DPT-A06
BrandDwyer USA
Voltage4-20 mA output.
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A06
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A06
Country of OriginMade in India

Dwyer DPT-A06 Digital Pressure Transmitter With Switch.

  • Range: 0 to 160 psig, 4-20 mA output..
  • Dwyer Part # DPT-A06
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range -0 to 160 psig, 4-20 mA output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in Any Position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-A07 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationHydraulics and Pneumatics
Model Name/NumberDwyer DPT-A07
BrandDwyer USA
Voltage4-20 mA output.
Operating Range0 to 200 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A07
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A07
Country of OriginMade in India

Dwyer DPT-A07 Digital Pressure Transmitter With Switch

  • Range: 0 to 200 psig, 4-20 mA output.
  • Dwyer Part # DPT-A07
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 200 psig, 4-20 mA output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-A08 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-A08
BrandDwyer USA
Voltage0-10 VDC output.
Accuracy1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
Operating Range0 to 300 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A08
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-A08
Country of OriginMade in India
DisplayRed LED 4-digit (0.35″ H digits).
Process Connections:1/4″ male NPT.
Temperature Limits:32 to 176 DegreeF (0 to 80 DegreeC).
Power Requirements:15 to 35 VDC.

Dwyer DPT-A08 Digital Pressure Transmitter With Switch

  • Range: 0 to 300 psig, 4-20 mA output.
  • Dwyer Part # DPT-A08
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 300 psig, 4-20 mA output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-A09 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationMachine Tools
Model Name/NumberDwyer DPT-A09
BrandDwyer USA
Voltage4-20 mA output.
Operating Range0 to 500 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A09
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A09
Country of OriginMade in India

Dwyer DPT-A09 Digital Pressure Transmitter With Switch.

  • Range: 0 to 500 psig, 4-20 mA output.
  • Dwyer Part # DPT-A09
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 500 psig, 4-20 mA output

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-A10 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-A10
BrandDwyer USA
Voltage4-20 mA output.
Operating Range0 to 1000 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-A10
Rated Supply Voltage4-20 mA output.
Supply Voltage Limits4-20 mA output.
Output Type4-20 mA output.
Part TypeDwyer DPT-A10
Country of OriginMade in India

Dwyer DPT-A10 Digital Pressure Transmitter With Switch

  • Range: 0 to 1000 psig, 4-20 mA output.
  • Dwyer Part # DPT-A10
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 1000 psig, 4-20 mA output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Dwyer DPT-V00 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompressors and Pumps
Model Name/NumberDwyer DPT-V00
BrandDwyer USA
Voltage0-10 VDC output.
Product Weight7 oz (0.2 kg).
Rated Supply Voltage0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V00
Country of OriginMade in India

Dwyer DPT-V00 Digital Pressure Transmitter With Switch.

  • Range: 14.5 to 0 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V00
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range -14.5 to 0 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-V01 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationMachine Building
Model Name/NumberDwyer DPT-V01
BrandDwyer USA
Voltage0-10 VDC output.
Operating Range0 to 15 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V01
Rated Supply Voltage0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V01
Country of OriginMade in India

Dwyer DPT-V01 Digital Pressure Transmitter With Switch.

  • Range: 0 to 15 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V01
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 15 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure Sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-V02 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-V02
BrandDwyer USA
Accuracy1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
Operating Range0 to 25 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V02
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V02
Country of OriginMade in India
DisplayRed LED 4-digit (0.35″ H digits).
Process Connections:1/4″ male NPT.
Temperature Limits:32 to 176 DegreeF (0 to 80 DegreeC).
Power Requirements:15 to 35 VDC.

Dwyer DPT-V02 Digital Pressure Transmitter With Switch

  • Range: 0 to 25 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V02
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 25 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Dwyer DPT-V03 Digital Pressure Transmitter With Switch

 
 
Usage/ApplicationMachine Building
Model Name/NumberDwyer DPT-V03
BrandDwyer USA
Voltage0-10 VDC output.
Operating Range0 to 30 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V03
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V03
Country of OriginMade in India

Dwyer DPT-V03 Digital Pressure Transmitter With Switch.

  • Range: 0 to 30 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V03
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 30 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-V04 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationHydraulics and Pneumatics
Model Name/NumberDwyer DPT-V04
BrandDwyer USA
Voltage0-10 VDC output.
Operating Range0 to 50 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V04
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V04
Country of OriginMade in India

Dwyer DPT-V04 Digital Pressure Transmitter With Switch.

  • Range: 0 to 50 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V04
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 50 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.

Dwyer DPT-V05 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-V05
BrandDwyer USA
Voltage0-10 VDC output.
Accuracy1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
Operating Range0 to 100 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V05
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V05
Country of OriginMade in India
DisplayRed LED 4-digit (0.35″ H digits).
Process Connections:1/4″ male NPT.
Temperature Limits:32 to 176 DegreeF (0 to 80 DegreeC).
Power Requirements:15 to 35 VDC.

Dwyer DPT-V05 Digital Pressure Transmitter With Switch

  • Range: 0 to 100 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V05
  • Condition : Brand New
  • Availability : Contact Us


Digital Pressure Transmitter, Range 0 to 100 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).


SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.


TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.


Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation


Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-V06 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompressors And Pumps
Model Name/NumberDwyer DPT-V06
BrandDwyer USA
Voltage0-10 VDC output.
Operating Range0 to 160 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V06
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V06
Country of OriginMade in India

Dwyer DPT-V06 Digital Pressure Transmitter With Switch.

  • Range: 0 to 160 psig, 0-10 VDC
  • Dwyer Part # DPT-V06
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 160 psig, 0-10 VDC

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-V08 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCompatible Gases,Liquids Or Vapors.
Model Name/NumberDwyer DPT-V08
BrandDwyer USA
Voltage0-10 VDC output.
Accuracy1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
Operating Range0 to 300 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V08
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V08
Country of OriginMade in India
DisplayRed LED 4-digit (0.35″ H digits).
Process Connections:1/4″ male NPT.
Temperature Limits:32 to 176 DegreeF (0 to 80 DegreeC).
Power Requirements:15 to 35 VDC.

 

Dwyer DPT-V08 Digital Pressure Transmitter With Switch

  • Range: 0 to 300 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V08
  • Condition : Brand New
  • Availability : Contact Us


Digital Pressure Transmitter, Range 0 to 300 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).


SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.


TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.


Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation


Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED

Dwyer DPT-V09 Digital Pressure Transmitter With Switch

 
 
Minimum Order Quantity1 Number
Usage/ApplicationCalibration
Model Name/NumberDwyer DPT-V09
BrandDwyer USA
Voltage0-10 VDC output.
Operating Range0 to 500 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V09
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V09
Country of OriginMade in India

Dwyer DPT-V09 Digital Pressure Transmitter With Switch.

  • Range: 0 to 500 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V09
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 500 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Dwyer DPT-V10 Digital Pressure Transmitter With Switch

 
 
Usage/ApplicationCalibration,Hydraulics And Pneumatics,Machine Tools,Compressors And Pumps,Machine Building
Model Name/NumberDwyer DPT-V10
BrandDwyer USA
Voltage0-10 VDC output.
Operating Range0 to 1000 psig
Product Weight7 oz (0.2 kg).
Protection TypeDwyer DPT-V10
Rated Supply Voltage0-10 VDC output.
Supply Voltage Limits0-10 VDC output.
Output Type0-10 VDC output.
Part TypeDwyer DPT-V10
Country of OriginMade in India

Dwyer DPT-V10 Digital Pressure Transmitter With Switch.

  • Range: 0 to 1000 psig, 0-10 VDC output.
  • Dwyer Part # DPT-V10
  • Condition : Brand New
  • Availability : Contact Us

Digital Pressure Transmitter, Range 0 to 1000 psig, 0-10 VDC output.

Specifications

  • Service:Compatible Gases,Liquids Or Vapors.
  • Wetted Materials:Pressure Connection: 316 L SS; Pressure sensor: 316 L SS (13-8 PH For Ranges Above 150 psi).
  • Housing:316 L Lower Body, Heat and Chemical Resistant Fiber Glass Reinforced Plastic (PBT) Plastic Head, TPE-E keyboard, PC Display Window.
  • Accuracy:1.0% F.S. (Includes Non-Linearity, Hysteresis, Zero Point).
  • Pressure Limit:See Catalog page.
  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Process Connections:1/4″ male NPT.
  • Display:Red LED 4-digit (0.35″ H digits).
  • Weight:7 oz (0.2 kg).

SWITCH SPECIFICATIONS:

  • Switch Type:PNP.
  • Electrical Rating:250 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Mounting Orientation:Mount in any position.

TRANSMITTER SPECIFICATIONS:

  • Temperature Limits:32 to 176°F (0 to 80°C).
  • Thermal Effect:0.2% FS / 10k.
  • Power Requirements:15 to 35 VDC.
  • Output Signal:DPT-A: 4 to 20 mA; DPT-V: 0 to 10 VDC.
  • Loop Resistance:DPT-A: ≤ 0.5k; DPT-V: > 10k.
  • Power Consumption:≤ 100 mA.
  • Electrical Connections:M 12×1, 5-pin.
  • Enclosure Rating:IP67.
  • Agency Approvals:CE.

Features

  • Dual PNP Solid State Switches
  • 14-segment red LED Display
  • User-friendly, intuitive 3-key operation
  • Rotating design: 330° display rotation; 180° display Electronic Rotation

Accessories

  • Model Number : A-195
  • Description : 6′ (2 m) shielded cable with 5 pin Female M-12 Connections.
  • Model Number : NISTCAL-PT1
  • Description : NIST Traceable Calibration Certificate For Pressure Transmitters.NOTE: EQUAL CERTS WILL BE CHARGED PER UNITS PURCHASED.
 

Sensocon Series 212 Weather Proof Differential Pressure Transmitter Wholesaler

Sensocon Series 212 Weather Proof Differential Pressure Transmitter Wholesaler

Nov 2, 2021 by admin 0 Comments

212-D001I-1 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-2 kPa
Usage/ApplicationGas Flow Measurement, Gas Flow Metering
Accuracy1.0%
Automation GradeManual
Weight150 g
BrandSensocon USA
Model Number/Name212-D001I-1
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Power Supply12-30 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D001I-1 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

Series 212 Weather-Proof Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model NumberSeries 212
Power12-30 VDC
Accuracy0.25%
Usage/ApplicationFilter and Blower Monitoring
BrandSensocon USA
Process ConnectionBarbed Fittings For 3/16″ Flexible Tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew Terminals
Stability+/- 0.25% FS/year
Output Signal4-20 mA, 2 wire or 0-10V, 3 wire
Thermal Effect+/- 0.05% FS/ deg F (+/- 0.050%/ deg C)
Operating Temperature-10 deg to 155 deg F (-25 deg to 70 deg C)


Series 212 Weather-Proof Differential Pressure Transmitter

The Series 212 Weatherproof Differential Pressure Transmitter can accurately measurepositive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

Model

Pressure RangeAccuracy
212-D001I-10-1″1%
212-D002I-10-2″1%
212-D004I-10-4″1%
212-D006I-30-6″0.25%
212-D010I-30-10″0.25%
212-D020I-30-20″0.25%
212-D040I-30-40″0.25%
212-D005P-30-5 PSI0.25%
212-D010P-30-10 PSI0.25%
212-D015P-30-15 PSI0.25%
212-D250A-10-250 Pa1%
212-D500A-10-500 Pa1%
212-D001K-10-1 kPa1%
212-D002K-30-2 kPa0.25%
212-D003K-30-3 kPa0.25%
212-D005K-30-5 kPa0.25%
212-D010K-30-10 kPa0.25%
212-D025K-30-25 kPa0.25%
212-D050K-30-50 kPa0.25%
212-D100K-30-100 kPa0.25%

 

*For 0-10 V output, add -V to the end of the part number. Consult factory for other calibration ranges including zero center ranges.

Weather Proof Differential Pressure Transmitter-212

 
 
Minimum Order Quantity1 Number
BrandSensocon USA
Media TypeGas
Current Rating (In Amps)4-20 mA or 0-10 V output signal.
Weight150 g
Accuracy0.25%
Usage/ApplicationFan,Blower and filter monitoring
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

Weather Proof Differential Pressure Transmitter-212 The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D001K-1 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-1 kPa
Usage/ApplicationValve and Flap Control, Filter and Blower Monitoring
Accuracy1.0%
Automation GradeManual
Weight150 g
Power Supply12-30 VDC
BrandSensocon USA
Model Number/Name212-D001K-1
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year


212-D001K-1 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D002I-1 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-2 in w.c.
Usage/ApplicationBuilding Automation, Air conditioning and clean rooms
Accuracy1.0%
Product Weight150 g
Power Supply12-30 VDC
BrandSensocon USA
Model Number/Name212-D002I-1
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D002I-1 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D002K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-2 kPa
Power12-30 VDC
Usage/ApplicationEnvironment protection
Accuracy0.25%
Product Weight150 g
BrandSensocon USA
Model Number212-D002K-3
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D002K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 


Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D003K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-3 kPa
Power12-30 VDC
Usage/ApplicationEnvironment Protection, Stair Pressurization
Accuracy0.25%
Product Weight150 g
BrandSensocon USA
Model Number/Name212-D003K-3
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year


212-D003K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D004I-1 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-4 in w.c.
Power12-30 VDC
Usage/ApplicationBuilding Automation, Air Conditioning and Clean Rooms
Accuracy1.0%
BrandSensocon USA
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D004I-1 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D005K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-5 kPa
Usage/ApplicationStair Pressurization, Filter and Blower Monitoring
Accuracy0.25%
Automation GradeManual
Weight150 g
Power Supply12-30 VDC
BrandSensocon USA
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year


212-D005K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D005P-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Frequency Range0-5 PSI
Power12-30 VDC
Usage/ApplicationGas Flow Measurement, Air Velocity Measurement
Accuracy0.25%
Product Weight150 g
BrandSensocon USA
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D005P-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D006I-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D006I-3
BrandSensocon USA
Accuracy0.25%
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew Terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.50% FS/ deg C)
Range0-6 in w.c.


212-D006I-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D010I-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D010I-3
BrandSensocon USA
Frequency Range0-10 in w.c
Accuracy0.25%
Usage/ApplicationValve and Flap Control, Fans and Blower Control
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.50% FS/ deg C)

212-D010I-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D010K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D010K-3
BrandSensocon USA
Frequency Range0-10 kPa
Accuracy0.25%
Usage/ApplicationStair Pressurization, Filter and Blower Monitoring
Weight150 g
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year


212-D010K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D010P-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D010P-3
BrandSensocon USA
Frequency Range0-10 PSI
Accuracy0.25%
Usage/ApplicationAir Flow Monitoring
Supply12-30 VDC
Weight150 g
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D010P-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D015P-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D015P-3
BrandSensocon USA
Frequency Range0-15 PSI
Accuracy0.25%
Usage/ApplicationAir Velocity Measurement
Weight150 g
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D015P-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D100K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D100K-3
BrandSensocon USA
Frequency Range0-100 kPa
Accuracy0.25%
Usage/ApplicationEnvironment Protection, Building Automation
Weight150 g
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D100K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D020I-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D020I-3
BrandSensocon USA
Frequency Range0-20 in w.c.
Accuracy0.25%
Usage/ApplicationBuilding Automation, Air Flow Monitoring
Weight150 g
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D020I-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D500A-1 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D500A-1
BrandSensocon USA
Frequency Range0-500 Pa
Power12-30 VDC
Accuracy1.0%
Usage/ApplicationFans and Blower Control
Weight150 g
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D500A-1 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D025K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D025K-3
BrandSensocon USA
Frequency Range0-25 kPa
Accuracy0.25%
Usage/ApplicationBuilding Automation
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year

212-D025K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D050K-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D050K-3
BrandSensocon USA
Frequency Range0-50 kPa
Power12-30 VDC
Accuracy0.25%
Usage/ApplicationGas Flow Measurement, Gas Flow Metering
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year


212-D050K-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D250A-1 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
ApplicationAir Conditioning and Clean Rooms
Model Number212-D250A-1
BrandSensocon USA
Frequency Range0-250 Pa
Accuracy1.0%
Automation GradeManual
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew Terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.50% FS/ deg C)

212-D250A-1 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

 

Applications:
  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering
 

212-D040I-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D040I-3
BrandSensocon USA
Frequency Range0-40 in w.c.
Accuracy0.25%
Usage/ApplicationFilter and Blower Monitoring
Weight150 g
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.50% FS/ deg C)


212-D040I-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.


Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

212-D020I-3 Sensocon USA Differential Pressure Transmitter

 
 
Minimum Order Quantity1 Number
Model Number212-D020I-3
BrandSensocon USA
Frequency Range0-20 in w.c.
Accuracy0.25%
Usage/ApplicationAir Flow Monitoring
Weight150 g
Power Supply12-30 VDC
Agency ApprovalsCE
Process ConnectionBarbed fittings for 3/16″ flexible tubing
Electrical EntryPG7 Cable Gland
Electrical ConnectionsScrew terminals
Enclosure RatingIP 65
Loop Resistance250 @ 24 VDC
Output Signal4-20 mA, 2-wire or 0 – 10 V
Stability+/- 0.25% FS/year
Thermal Effect+/- 0.028% FS/ deg F (+/- 0.50% FS/ deg C)


212-D020I-3 Sensocon USA Differential Pressure Transmitter The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.

Applications:

  • Air Conditioning and Clean Rooms
  • Building Automation
  • Environment Protection
  • Fans and Blower Control
  • Valve and Flap Control
  • Filter and Blower Monitoring
  • Stair Pressurization
  • Control Of Air Flows
  • Air Flow Monitoring
  • Air Velocity Measurement
  • Gas Flow Measurement
  • Gas Flow Metering

Mounting Options Dwyer Instruments, Uncategorized

Mounting Options Dwyer Instruments

Nov 2, 2021 by admin 0 Comments

Magnehelic Gauge with S.S. Enclosure

 
 
BrandETIP
MaterialSS
Dial Size4 inch
Material GradeSS304
Rangesmm/wc,In/wc, Pascal
Enclosure TypeConsul Type & Wall Mounting
Front PanelZero Calibration Gas Selector Switch Optional

We are here to offer Magnehelic Gauge With S.S. Enclosure. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.

 

Available in different specifications ranging from:
  • 0-10,
  • 0-25,
  • 0-40,
  • 0-50,
  • 0-100 MM Wc , And
  • 0- 60 pA,
  • 0-250 pA.

Uses:
  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.
 

Sensocon USA Differential Pressure Gauge 10-0-10 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)10-0-10 MM WC
Model No.2300-20MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
AccessoriesTwo 1/8″ NPT barbed fittings,two 1/8″ NPT plugs, and three mounting tabs and screws
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge10-0-10 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog Dial
Measuring Range(mm)6-0-6 MM WC
Model No.2300-10MM
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Resolution0.2
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 Degree to 140 deg F (-7 deg to 60 deg C)
ApprovalsRoHS, CE

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc 

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon USA Differential Pressure Gauge 0 To 200 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog
Measuring Range(mm)0 to 200 MM WC
BrandSensocon USA
Model No.S2000-200MM
Accuracy+-2% full-scale
Resolution0.2
Media CompatibilityGases and liquids compatible with wetted materials
Dial Size (in)4
Dial Size (mm)102
Max Pressure (in WC)10
Wetted MaterialsAluminum
CaseAluminum
Lens MaterialAcrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC

Sensocon Usa Differential Pressure Gauge 0 To 200 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog Dial
Measuring Range(mm)0 to 150 MM WC
Model No.S2000-150MM
Accuracy+-2% full-scale
Case And BezelAluminum
Resolution0.2
BrandSensocon USA
Media CompatibilityGases and liquids compatible with wetted materials
Dial Size (in)4
Dial Size (mm)102
Max Pressure (in WC)10
Wetted MaterialsAluminum
Lens MaterialAcrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC
DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 150 MM WC

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc 

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 TO 30 MM WC
Model No.S2000-30MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 15 MM WC
Model No.S2000-15MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 25 MM WC
BrandSensocon USA
Model No.S2000-25MM
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
ApprovalsRoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Magnehelic Gauge With SS Enclosure

 
 
BrandENVIRO TECH
Model Name/NumberMagnehelic Gauge With SS Enclosure
Usage/ApplicationIndustrial
MaterialSteel
ConnectionNew
ColorSilver
Size160 X160 X 80 mm
Gauge20 SWG
Warranty1 YERS
Material GradeSS 304
I Deal InNew Only
Country of OriginMade in India

Magnehelic Gauge With SS Enclosure

Price Will Be Change As Per Size And MOC

Sensocon USA Differential Pressure Gauge 0 To 80 Mm Wc

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 80 MM WC
Model No.S2000-80MM
BrandSensocon USA
Accuracy+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight1 lb 2 oz (510 g)
Housing MaterialDie cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media CompatibilityAir and compatible gasses
Warranty2 years
Pressure Limits-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection1/8″ female NPT
ApprovalsRoHS, CE

 

Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Sensocon 2000-80mm Differential Pressure Gauge0-80 Mm

  • Precision litho-printed scale is accurate and easy to read.
  • Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • “Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
  • Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
  • Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
  • Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
  • Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
  • Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
  • Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
  • Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
  • Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
  • O-ring seal for cover assures pressure integrity of case.

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

 
 
Minimum Order Quantity1 Number
Display TypeAnalog dial
Measuring Range(mm)0 to 125 MM WC
Model No.S2000-125MM
BrandSensocon USA
Accuracy+-2% full-scale
Case And BezelAluminum
Resolution0.2
Media CompatibilityGases and liquids compatible with wetted materials
Dial Size (in)4
Dial Size (mm)102
Max Pressure (in WC)10
Wetted MaterialsAluminum
Lens MaterialAcrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC
DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 125 MM WC

 

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

 

More About This Item

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

MS Flesh Type Magnehelic Gauge

 
 
BrandETIP
MaterialPS for Cup, PP for Ring
Measurement ObjectDepth
Gauge TypeLimit Gauge
Surface FinishPolished

We are one of the topmost manufacturer, exporter and supplier of a superior quality range of MS Box Flesh type Magnehelic Gauge. These instruments are designed and made utilizing the finest grade raw material by following high definition engineering principles. Furthermore, these are widely appreciated for some of the salient features like accurate dimension, durability, superior performance and corrosion resistance. We provide these to our clients in both, standard and customized options according to the specific demands of customers.
 

GI Magnehelic Gauge Box

 
 
Display TypeAnalog
MaterialGI Sheet
BrandETIP
Size/Dimension4 inch
Connection TypeAxial
Indicating Pressure ReferenceGeneral Pressure Gauge
Installation StructureConvex

We have been continuously indulged in supplying a high quality array of GI Magnehelic Gauge Box to our highly valued consumers. Our products are highly acclaimed for their performance and quality. These are widely execute in numerous sectors. These products are gettable at leading market prices.

Magnehelic Gauge SS Plate Front Cover

 
 
MaterialSS
BrandETIP
Wetted PartsSS 304
Diameter4 inch
Rangesmm/wc,In/wc, Pascal
Enclosure TypeConsul Type & Wall Mounting
Front PanelZero Calibration Gas Selector Switch Optional

We are here to offer Magnehelic Gauge SS Plate Front Cover. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.

Available in different specifications ranging from:

  • 0-10,
  • 0-25,
  • 0-40,
  • 0-50,
  • 0-100 MM Wc , And
  • 0- 60 pA,
  • 0-250 pA.

Uses:

  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.
 

Magnehelic Gauge L Plat

 
 
MaterialSS
Packaging Type1
Material GradeSS 304
BrandETIP
Wetted PartsSS 304
ApplicationsMagnehelic Gauge L Plat
I Deal InNew Only
Plate ShapeL Shape
Thickness Of Sheet1 mm

L Plat Magnehelic Gauge
  • Sheet SS 304
  • MACK Enviro Tech Industrial Products
  • Application Product MAGNEHELIC GAUGE
  • Thickness Of Sheet 1 MM
 

Magnehelic Gauge Shape Plate

 
 
MaterialSS
Usage/ApplicationMagnehelic Gauge
ShapeSquare
Material GradeSS 304
BrandETIP
Wetted PartsSS 304
Thickness Of Sheet1 mm

MAGNEHELIC GAUGE Shape Plate

  • Sheet —- SS 304
  • MACK —- Enviro Tech Industrial Products
  • Application Product——-MAGNEHELIC GAUGE
  • Thickness Of Sheet——1 MM
  • Center Hole —————100 MM
 

Magnehelic Differential Pressure Gauge SS Box

 
 
BrandETIP
Display TypeAnalog
MaterialStainless Steel
Measurement ObjectLength
Dial TypeDial Indicator

This SS-304, SS-202, stainless steel hinged box has a polished satin finish. This box has a hinged door with a face cutout to accept a Dwyer magnehelic pressure gauge. Box comes complete with holes to accept pressure differential sensors. Box is fabricated with a flanged face for recess mounting.
 

Connection Kit for Pressure Gauge

 
 
MaterialPlastic
BrandETIP
ColorBlack
Size5×8 mm
Tube Length2 m

Connection kit for pressure Gauge:
Used to access pressure measurement points . e.g either side of the filter on an Air Handling Unit. 
 

Mounting Box

 
 
MaterialSS
BrandETIP
Material GradeSS304
Installation StructureDirect Mounting
FunctionLocal Indication Type
Display TypeAnalog


Bracket is Surface Mounted. Steel With Gray Hammer tone Epoxy Finish. For Use With Dwyer Series.

Wall Grouting Box

 
 
BrandETIP
MaterialSS
Wetted PartsSS 304
Weight60 kg
Power2200 W
Size105x50x105 cm
Capacity20 L
Mounting Of Gauge18 SWG
Voltage220 V AC


Wall Grouting Box is a Mild Steel Powder Coated Box with Stainless Steel Front Flush Plate for mounting Differential Pressure Gauges into Brick Walls / Modular Walls.

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

 
 
Minimum Order Quantity1 Number
Dial Size4 inch / 100 mm
BrandDwyer
Pressure Range3-0-3 MM WC
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size1/8 inch
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Agency ApprovalRoHS

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnehelic gauge is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

 
 
Minimum Order Quantity1 Number
Dial Size4 inch / 100 mm
Pressure Range-0.677 to 1.034 bar
UseHVAC Systems
Display TypeAnalog
Pressure TypeDifferential Pressure
Connection TypeNPT
Connection Size1/8 inch
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
BrandDwyer USA
Agency ApprovalRoHS
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Overpressure25 psig (1.72 bar)

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Magnehelic Gauge Enclosures

 
 
MaterialSS 304
ShapeSquare, Triangle
BrandENVIRO TECH
ColorBlack
Size/Dimension160 X160 X 80 mm
Mounting Plate Thickness20 SWG
TypeSS 304
Warranty1 YERS
Model Name/NumberMagnehelic Gauge Enclosures
Packaging1
Usage/ApplicationMagnehelic Gauge
I Deal InNew Only
Country of OriginMade in India

Magnehelic Gauge  Enclosures

Price Will Be Change As Per Size And MOC
 

A – 103 Mounting Plate

 
 
Minimum Order Quantity100 No
BrandETIP
MaterialAluminum, SS
Surface FinishPolished
ShapeSquare
Steel GradeSS304

A – 103 Mounting Plate
  • Aluminium / ss metal plate and screws to surface mount the S2000 differential pressure gauge
 

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 500 MM WC
BrandDwyer USA
Model No.2000-500MM
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie cast aluminum case and bezel
Wetted MaterialsConsult Factory
Pressure Limits-20 in Hg to 15 psig
Overpressure25 psig (1.72 bar)
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Agency ApprovalRoHS

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Dwyer USA Magnehelic Gauges 0 To 10 MM WC

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 to 10 MM WC
BrandDwyer USA
Model No.2300-10MM
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie Cast Aluminum Case And Bezel
Pressure Limits-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar)
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Agency ApprovalRoHS


Dwyer Usa Magnehelic Gauges 0 To 10 Mm

Wcincludes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

 

More About This Item:

  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

 

Specifications & Description:

  • Accuracy+-2% full-scale
  • Dial Size (in)4
  • Dial Size (mm)102
  • Min Pressure (in WC)0
  • Max Pressure (in WC)10
  • Wetted MaterialsAluminum
  • CaseAluminum
  • Lens Materialacrylic
  • Process Connection1/8″ NPT
  • Unit Of Measurement” WC
  • Displayanalog dial
  • Media CompatibilityGases and liquids compatible with wetted materials
  • Resolution0.20
  • DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 10 MM WC

 

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)0 TO 6 MM WC
BrandDwyer USA
Model No.2000-6MM
Accuracy+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Size4″ (101.6 mm) diameter dial face
Pressure Limits-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)
Process Connections1/8″ female NPT
Agency ApprovalRoHS

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

Includes:

  • Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:
  • The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
  • The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.
 

Dwyer Differential Pressure Switch Wholesaler, Uncategorized

Dwyer Differential Pressure Switch Wholesaler

Nov 2, 2021 by admin 0 Comments

Dwyer BDPA-07-2-N Adjustable Differential Pressure Switch

 
 
Media TypeGas
Weight6.1 oz (173 g)
Model NumberBDPA-07-2-N
Electrical Rating1.0 A @ 30 VDC/VAC
BrandDWYER
Temperature Limits32 to 122 DegreeF (0 to 50 DegreeC)
Pressure Limits40″ w.c. (10 kPa)
Switch TypeSPDT
Enclosure RatingIP21


The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).

Approvals

  • CE Approval
  • Reduction of Hazardous Substance (RoHS)


Specification

ServiceAir and noncombustible, compatible gases
Wetted MaterialsDiaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene
Temperature Limits32 to 122°F (0 to 50°C)
Pressure Limits40″ w.c. (10 kPa)
Electrical Rating1.0 A @ 30 VDC/VAC
Switch TypeSPDT
Alarm Indicationrm.Red LED and audible alarm
Alarm LevelApproximately 90 db at 4″ (10 cm)
Alarm AcknowledgeButton press
Power Requirements16 to 30 VDC, 18 to 30 VAC or 3.6 V LS14250 lithium metal battery, installed functional, user replaceable. Battery acts as back-up if power is lost
Battery LifeApproximately 1.5 years with 3.6 V/1.2 Ah
Repeatability±15% FS
Electrical ConnectionsScrew terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
Process Connections5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
Mounting OrientationVertically, with pressure connections pointing downwards
Enclosure RatingIP21
Weight6.1 oz (173 g)
Agency ApprovalsCE, RoHS

Dwyer BDPA-06-2-N Adjustable Differential Pressure Switch

 
 
Media TypeGas
Weight6.1 oz (173 g)
Model NumberBDPA-06-2-N
Electrical Rating1.0 A @ 30 VDC/VAC
BrandDWYER
Temperature Limits32 to 122 DegreeF (0 to 50 DegreeC)
Pressure Limits40″ w.c. (10 kPa)
Switch TypeSPDT
Enclosure RatingIP21


The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).

Approvals

  • CE Approval
  • Reduction of Hazardous Substance (RoHS)


Specification

ServiceAir and noncombustible, compatible gases
Wetted MaterialsDiaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene
Temperature Limits32 to 122°F (0 to 50°C)
Pressure Limits40″ w.c. (10 kPa)
Electrical Rating1.0 A @ 30 VDC/VAC
Switch TypeSPDT
Alarm Indicationrm.Red LED and audible alarm
Alarm LevelApproximately 90 db at 4″ (10 cm)
Alarm AcknowledgeButton press
Power Requirements16 to 30 VDC, 18 to 30 VAC or 3.6 V LS14250 lithium metal battery, installed functional, user replaceable. Battery acts as back-up if power is lost
Battery LifeApproximately 1.5 years with 3.6 V/1.2 Ah
Repeatability±15% FS
Electrical ConnectionsScrew terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
Process Connections5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
Mounting OrientationVertically, with pressure connections pointing downwards
Enclosure RatingIP21
Weight6.1 oz (173 g)
Agency ApprovalsCE, RoHS

Dwyer BDPA-05-2-N Adjustable Differential Pressure Switch

 
 
Weight6.1 oz (173 g)
Model NumberBDPA-05-2-N
Electrical Rating1.0 A @ 30 VDC/VAC
BrandDWYER
Temperature Limits32 to 122 DegreeF (0 to 50 DegreeC)
Pressure Limits40″ w.c. (10 kPa)
Switch TypeSPDT
Enclosure RatingIP 21


The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).

Approvals:

  • CE Approval
  • Reduction of Hazardous Substance (RoHS)

 

Specification:

ServiceAir and noncombustible, compatible gases
Wetted MaterialsDiaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene
Temperature Limits32 to 122°F (0 to 50°C)
Pressure Limits40″ w.c. (10 kPa)
Electrical Rating1.0 A @ 30 VDC/VAC
Switch TypeSPDT
Alarm Indicationrm.Red LED and audible alarm
Alarm LevelApproximately 90 db at 4″ (10 cm)
Alarm AcknowledgeButton press
Power Requirements16 to 30 VDC, 18 to 30 VAC or 3.6 V LS14250 lithium metal battery, installed functional, user replaceable. Battery acts as back-up if power is lost
Battery LifeApproximately 1.5 years with 3.6 V/1.2 Ah
Repeatability±15% FS
Electrical ConnectionsScrew terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
Process Connections5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
Mounting OrientationVertically, with pressure connections pointing downwards
Enclosure RatingIP21
Weight6.1 oz (173 g)
Agency ApprovalsCE, RoHS

Dwyer BDPA-03-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Weight160 g
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Voltage250 VAC


Dwyer BDPA-03-2-N Adjustable Differential Pressure Switch

Series BDPA Adjustable Differential Pressure Alarm .20-2.00″ w.c.

24 Volt or Battery Powered, Built-in Audible and Visual Alarm

The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).

Approvals

  • Reduction of Hazardous Substance (RoHS)
  • CE Approval

Specification

ServiceAir and noncombustible, compatible gases
Wetted MaterialsDiaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene
Temperature Limits32 to 122°F (0 to 50°C)
Pressure Limits40″ w.c. (10 kPa)
Electrical Rating1.0 A @ 30 VDC/VAC
Switch TypeSPDT
Alarm Indicationrm.Red LED and audible alarm
Alarm LevelApproximately 90 db at 4″ (10 cm)
Alarm AcknowledgeButton press
Power Requirements16 to 30 VDC, 18 to 30 VAC or 3.6 V LS14250 lithium metal battery, installed functional, user replaceable. Battery acts as back-up if power is lost
Battery LifeApproximately 1.5 years with 3.6 V/1.2 Ah
Repeatability±15% FS
Electrical ConnectionsScrew terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
Process Connections5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
Mounting OrientationVertically, with pressure connections pointing downwards
Enclosure RatingIP21
Weight6.1 oz (173 g)
Agency ApprovalsCE, RoHS

Dwyer BDPA-04-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Media TypeGas
Power/Voltage250 VAC
Weight160 g
Model NumberBDPA-04-2-N
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz


The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

 

Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).


Product Applications:

  • Air filter and ventilator monitoring
  • Industrial cooling circuits
  • Fire-protection damper control
  • Ventilation duct monitoring
  • Fan heater overheating protection
  • Heat exchanger frost protection



Specification:

ServiceAir and noncombustible, compatible gases
Wetted MaterialsDiaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene
Temperature Limits32 to 122°F (0 to 50°C)
Pressure Limits40″ w.c. (10 kPa)
Electrical Rating1.0 A @ 30 VDC/VAC
Switch TypeSPDT
Alarm Indicationrm.Red LED and audible alarm
Alarm LevelApproximately 90 db at 4″ (10 cm)
Alarm AcknowledgeButton press
Power Requirements16 to 30 VDC, 18 to 30 VAC or 3.6 V LS14250 lithium metal battery, installed functional, user replaceable. Battery acts as back-up if power is lost
Battery LifeApproximately 1.5 years with 3.6 V/1.2 Ah
Repeatability±15% FS
Electrical ConnectionsScrew terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
Process Connections5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
Mounting OrientationVertically, with pressure connections pointing downwards
Enclosure RatingIP21
Weight6.1 oz (173 g)
Agency ApprovalsCE, RoHS

Dwyer BDPA-08-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Process Temperature-40 to 185degF
Pressure Limit10 kPa
Voltage250 VAC
Frequency50 Hz
Process Connection5/16″


The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDC/VAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

Note: For a 1/2″ npt connection, use the 1/2″ conduit fitting adapter (A-483).

Product Applications

  • Air filter and ventilator monitoring
  • Industrial cooling circuits
  • Fire-protection damper control
  • Ventilation duct monitoring
  • Fan heater overheating protection
  • Heat exchanger frost protection



PRODUCT DESCRIPTIONDwyer Instruments BDPA-08-2-N, Adjustable differential pressure alarm, range .08-1.20 w.c., M20 connection. 
Adjustable differential pressure alarm, range .08-1.20 w.c., M20 connection.
24 Volt or Battery Powered, Built-in Audible and Visual Alarm
Item Specifications

  • Service: Air and noncombustible, compatible gases.
  • Wetted Materials: Diaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene.
  • Temperature Limits: 32 to 122°F (0 to 50°C).
  • pressure Limits: 40 w.c. (10 kPa).
  • Electrical Rating: 1.0 A @ 30 VDC/VAC/span>
  • Switch Type: SPDT.
  • Alarm Indicationrm.: Red LED and audible alarm.
  • Alarm Level: Approximately 90db at 4 (10 cm).
  • Alarm Acknowledge: Button preSS.
  • Power Requirements: 16 to 30 VDC, 18 to 30 VACor 3.6 V LS14250 lithium metal battery, installed functional, user replaceable. Battery acts as back-up if power is lost.
  • Battery Life: Approximately 1.5 years with 3.6 V/1.2 Ah.
  • Repeatability: _15% FS.
  • Electrical Connections: Screw terminals. M20x1.5 with cable strain relief or optional 1/2 NPT connection.
  • process Connections: 5/16 (7.94 mm) outside diameter tubing, 1/4 (6.0 mm) inside diameter tubing.
  • Mounting Orientation: Vertically, with pressure connections pointing downwards.
  • Weight: 6.1 oz (173 g).
  • Enclosure Rating: IP21.
  • Agency Approvals: CE, RoHS.

FIND SIMILAR PRODUCTS BY CATEGORY

  • Dwyer Instruments
  • Pressure
  • Differential Pressure
  • Switches

Dwyer Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.ADPS-07-2-N
Media TypeGas
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Voltage250 VAC


Our firm offers a high-quality range of Dwyer Differential Pressure Switch.

Features:

  • HVAC Differential Pressure Switch with Dual scale filed adjustable Set Point Knob.
  • The compact size, adjustment knob and low cost makes ADPS/EDPS the perfect choice for HVAC applications.


Applications:

  • Monitoring air filters and ventilators
  • Overheating protection for fan heaters
  • Monitoring industrial cooling air circuits
  • Monitoring flow in duct ventilation
  • Controlling air and fire protection dampers

Dwyer EDPS-07-1-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.EDPS-07-1-N
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″


The Series EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The EDPS is available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa). The silicone diaphragm and PA 6.6 body make the series EDPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and meeting the UL508 standard make the EDPS the perfect choice for H.V.A.C. applications. Product Applications

  • Monitoring air filters and ventilators.
  • Monitoring industrial cooling-air circuits.
  • Overheating protection for fan heaters.
  • Monitoring flows in ventilation ducts.
  • Controlling air and fire-protection dampers.
  • Frost protection for heat exchanges

Dwyer EDPS-05-1-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.EDPS-05-1-N
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Voltage250 VAC
Frequency50/60 Hz


The Series EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The EDPS is available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa). The silicone diaphragm and PA 6.6 body make the series EDPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and meeting the UL508 standard make the EDPS the perfect choice for H.V.A.C. applications. Product Applications

  • Monitoring air filters and ventilators.
  • Monitoring industrial cooling-air circuits.
  • Overheating protection for fan heaters.
  • Monitoring flows in ventilation ducts.
  • Controlling air and fire-protection dampers.
  • Frost protection for heat exchanges

Dwyer EDPS-06-1-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.EDPS-06-1-N
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Voltage250 VAC
Frequency50/60 Hz

The Series EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The EDPS is available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa). The silicone diaphragm and PA 6.6 body make the series EDPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and meeting the UL508 standard make the EDPS the perfect choice for H.V.A.C. applications. Product Applications
  • Monitoring air filters and ventilators.
  • Monitoring industrial cooling-air circuits.
  • Overheating protection for fan heaters.
  • Monitoring flows in ventilation ducts.
  • Controlling air and fire-protection dampers.
  • Frost protection for heat exchanges
 

Dwyer EDPS-08-1-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.EDPS-08-1-N
Power/Voltage250 VAC
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz

 

The Series EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The EDPS is available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa). The silicone diaphragm and PA 6.6 body make the series EDPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and meeting the UL508 standard make the EDPS the perfect choice for H.V.A.C. applications.


Product Applications:

  • Monitoring air filters and ventilators.
  • Monitoring industrial cooling-air circuits.
  • Overheating protection for fan heaters.
  • Monitoring flows in ventilation ducts.
  • Controlling air and fire-protection dampers.
  • Frost protection for heat exchanges

Dwyer EDPS-04-1-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.EDPS-04-1-N
Weight160 g
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Voltage250 VAC
Frequency50/60 Hz


The Series EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The EDPS is available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa). The silicone diaphragm and PA 6.6 body make the series EDPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and meeting the UL508 standard make the EDPS the perfect choice for H.V.A.C. applications. Product Applications

  • Monitoring air filters and ventilators.
  • Monitoring industrial cooling-air circuits.
  • Overheating protection for fan heaters.
  • Monitoring flows in ventilation ducts.
  • Controlling air and fire-protection dampers.
  • Frost protection for heat exchanges

Dwyer ADPS-07-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.ADPS-07-2-N
Power/Voltage250 VAC
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz


Features:

  • Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
  • The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
  • The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications


Specifications:

  • Service: Air and non-combustible, compatible gases
  • Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
  • Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
  • Switch Type: Single-pole double-throw (SPDT)
  • Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
  • Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
  • Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
  • Enclosure Rating: NEMA 13, IP54
  • Mounting Orientation: Vertically, with pressure connections pointing downwards
  • Mechanical Working Life: Over 106 switching operations
  • Weight: 5.6 oz (160 g)


Applications:

  • Monitoring air filters and ventilators
  • Monitoring industrial cooling-air circuits
  • Overheating protection for fan heaters
  • Monitoring flows in ventilation ducts
  • Controlling air and fire-protection dampers
  • Frost protection for heat exchanges

Dwyer EDPS-03-1-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.EDPS-03-2-N
Power/Voltage250 VAC
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz

The Series EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The EDPS is available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa). The silicone diaphragm and PA 6.6 body make the series EDPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and meeting the UL508 standard make the EDPS the perfect choice for H.V.A.C. applications. Product Applications
  • Monitoring air filters and ventilators.
  • Monitoring industrial cooling-air circuits.
  • Overheating protection for fan heaters.
  • Monitoring flows in ventilation ducts.
  • Controlling air and fire-protection dampers.
  • Frost protection for heat exchanges
 

Dwyer ADPS-08-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.ADPS-08-2-N
Power/Voltage250 VAC
Weight160 g
BrandDWYER USA
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz


Features:

  • Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
  • The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
  • The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications

Specifications

  • Service: Air and non-combustible, compatible gases
  • Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
  • Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
  • Switch Type: Single-pole double-throw (SPDT)
  • Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
  • Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
  • Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
  • Enclosure Rating: NEMA 13, IP54
  • Mounting Orientation: Vertically, with pressure connections pointing downwards
  • Mechanical Working Life: Over 106 switching operations
  • Weight: 5.6 oz (160 g)


Applications

  • Monitoring air filters and ventilators
  • Monitoring industrial cooling-air circuits
  • Overheating protection for fan heaters
  • Monitoring flows in ventilation ducts
  • Controlling air and fire-protection dampers
  • Frost protection for heat exchanges

Dwyer ADPS-06-2-N Adjustable Differential Pressure Switch

 
 
Current RatingMax. 1.5 A
Weight160 gm
Pressure Limit10 kPa
Enclosure RatingIP54
Voltage250 VAC
Frequency50/60 Hz


Features:

  • Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
  • The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
  • The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications


Specifications:

  • Service: Air and non-combustible, compatible gases
  • Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
  • Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
  • Switch Type: Single-pole double-throw (SPDT)
  • Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
  • Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
  • Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
  • Enclosure Rating: NEMA 13, IP54
  • Mounting Orientation: Vertically, with pressure connections pointing downwards
  • Mechanical Working Life: Over 106 switching operations
  • Weight: 5.6 oz (160 g)


Applications:

  • Monitoring air filters and ventilators
  • Monitoring industrial cooling-air circuits
  • Overheating protection for fan heaters
  • Monitoring flows in ventilation ducts
  • Controlling air and fire-protection dampers
  • Frost protection for heat exchanges

Dwyer ADPS-04-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.ADPS-04-2N CA (18)
Power/Voltage250 VAC
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz


Features:

  • Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
  • The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
  • The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications


Specifications

  • Service: Air and non-combustible, compatible gases
  • Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
  • Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
  • Switch Type: Single-pole double-throw (SPDT)
  • Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
  • Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
  • Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
  • Enclosure Rating: NEMA 13, IP54
  • Mounting Orientation: Vertically, with pressure connections pointing downwards
  • Mechanical Working Life: Over 106 switching operations
  • Weight: 5.6 oz (160 g)


Applications

  • Monitoring air filters and ventilators
  • Monitoring industrial cooling-air circuits
  • Overheating protection for fan heaters
  • Monitoring flows in ventilation ducts
  • Controlling air and fire-protection dampers
  • Frost protection for heat exchanges

Dwyer ADPS-05-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.ADPS-05-2-N-CA (18)
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″


Features:

  • Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
  • The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
  • The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications

Specifications

  • Service: Air and non-combustible, compatible gases
  • Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
  • Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
  • Switch Type: Single-pole double-throw (SPDT)
  • Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
  • Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
  • Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
  • Enclosure Rating: NEMA 13, IP54
  • Mounting Orientation: Vertically, with pressure connections pointing downwards
  • Mechanical Working Life: Over 106 switching operations
  • Weight: 5.6 oz (160 g)


Applications:

  • Monitoring air filters and ventilators
  • Monitoring industrial cooling-air circuits
  • Overheating protection for fan heaters
  • Monitoring flows in ventilation ducts
  • Controlling air and fire-protection dampers
  • Frost protection for heat exchanges

Dwyer ADPS-03-2-N Adjustable Differential Pressure Switch

 
 
Current Rating1.5 A
Model No.ADPS-03-2-N CA (18)
Weight160 g
BrandDWYER
Temperature Limits-4 to 185degF
Pressure Limit10 kPa
Process Connection5/16″
Frequency50/60 Hz


Designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage.

Adjustable differential pressure switch, set point range 0.20 to 2.00″ w.c., M20 connection.DPS Series Offers


Features

  • Available with settings from 0.08″ w.c. (20 Pa) up to 16″ w.c. (4000 Pa)
  • The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases
  • The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications


Specifications

  • Service: Air and non-combustible, compatible gases
  • Temperature Limits: Process and ambient temperature from -4 to 185°F (-20 to 85°C)
  • Pressure Limits: Max. Operating Pressure: 40″ w.c. (10 kPa) for all pressure ranges
  • Switch Type: Single-pole double-throw (SPDT)
  • Electrical Rating: Max., 1.5A/250 VAC, max. switching rate: 6 cycles/min.; Gold Contact Option: 0.4 A/ 250 VAC
  • Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2″ NPT connection
  • Process Connections: 5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing
  • Enclosure Rating: NEMA 13, IP54
  • Mounting Orientation: Vertically, with pressure connections pointing downwards
  • Mechanical Working Life: Over 106 switching operations
  • Weight: 5.6 oz (160 g)


Applications

  • Monitoring air filters and ventilators
  • Monitoring industrial cooling-air circuits
  • Overheating protection for fan heaters
  • Monitoring flows in ventilation ducts
  • Controlling air and fire-protection dampers
  • Frost protection for heat exchanges

Differential Pressure Switch

 
 
Minimum Order Quantity100 Number
Weight5.6 oz (160 g).
temperature LimitsProcess and ambient temperature from -4 to 185degF (-20 to 85degC).
Pressure LimitsMax. operating pressure: 40″ w.c. (10 kPa) for all pressure ranges.
Switch typeSingle-pole double-throw (SPDT).
Enclosure RatingNEMA 13 (IP54).
Process Connection” (6.0 mm) inside diameter tubing.s5/16″ (7.94 mm) outside diameter tubing, 1/4″ (6.0 mm) inside diameter tubing.


Being a market leader of this domain, we present clients with the premium quality of Differential Pressure Switch. Known for its simple calibration, digital push button and reduced set up time, the differential pressure switch is used for monitoring of air filters. Furthermore, the differential pressure switch is used for monitoring of ventilators.

Features:

  • Monitoring of industrial cooling air circuits
  • Simple calibration
  • Easy to use and maintain


Other Details:

  • Monitoring of air filters and ventilators
  • Monitoring of industrial cooling air circuits
  • Monitoring flow in ventilation ducts
  • Overheating protection in fan heaters
  • AHU status, fan status monitoring
  • Controlling air and fire-protection flaps
  • Frost protection for heat exchangers


Specifications:

  • Adjustable switching knob
  • Also available in ATEX, Hazardous area certified (Gr IIB, Gases)


Industries:

  • Clean rooms, pharmaceutical
  • Building ventilation
  • Fan status monitoring
  • Oil & gas
  • Food processing
  • Textile industries

Differential Pressure Switch DP930

 
 
Minimum Order Quantity12 Number
Model Name/NumberDP930
Power/Voltage1 SPDT,1A / 250VAC
Mounting TypeDiaphragm in Vertical Position
ProtectionIP54
Process Connection6.0mm Plastic Pipe
Housing MaterialABS
Repeatability+-2% of F.S
Temperature Ranges20 DegreeC to 85 DegreeC
Pressure RangesVarious Ranges upto 4 KPa

Special Features :
  • High Quality, Low-Cost
  • Visual Set Point Indication
  • Hassle-Free Field Adjustment Knob
  • 2% Repeatability

The DP930 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 1A @ 250V and can be set as low as 0.08” w.c. (20 Pa)

 

Dwyer Air Filter Kit A – 481

 
 
Usage/ApplicationCommercial
MaterialPlastic
BrandDwyer
Packaging TypePacket
Length3 mtr


Dwyer Air Filter Kit A – 481

Mack – Dwyer USA

MODEL – A – 481 Installer Kit w/2 A-480 Plastic Static Tips and 6’ PVC Tubing

Sensocon USA Differential Pressure Switch Series 104 – 3

 
 
Model No.104-3
Electrical Rating2A @ 250 V
BrandSensocon
Max Pressure1000 Pa
Temperature Limit5dg to 140dgF
Repeatability2%
Process Connection3/16″


The Series 104 Differential Pressure Switch is a low-cost easy to use differential pressure switch for very low pressure applications. The differential pressure switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for2A @ 250V and can be set as low as 0.08” w.c. (20 Pa).

Specification:

  • Media:Air and compatible gases
  • Max Pressure:20″ w.c. (5000 Pa)Temperature Limits:5 to 140°F (-15 to 60°C)Electrical Rating:2A @ 250 V
  • Electrical Connection:Screw terminals
  • Process Connection:3/16″ I.D. flexible tubing
  • Enclosure Rating:NEMA 13 (IP 54)Weight:3.5 oz (100 g)Accessories:6 ft (1.8m) flexible tubing, (2) Static pressure fittings, C type mounting bracket, and mounting screws
  • Repeatability:2%
  • Deadband:approximately 10% of max set point

Sensocon USA Differential Pressure Switch Series 104 – 0

 
 
BrandSensocon
Weight3.5 oz (100 g)
Electrical Rating2A @ 250 V
MediaAir and compatible gases
Max Pressure20″ w.c. (5000 Pa)
Temperature Limits5 to 140 DegreeF (-15 to 60 DegreeC)
Repeatability2%


The Series 104 Differential Pressure Switch is a low-cost easy to use differential pressure switch for very low pressure applications. The differential pressure switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for2A @ 250V and can be set as low as 0.08” w.c. (20 Pa).

Specification:

  • Media:Air and compatible gases
  • Max Pressure:20″ w.c. (5000 Pa)Temperature Limits:5 to 140°F (-15 to 60°C)Electrical Rating:2A @ 250 V
  • Electrical Connection:Screw terminals
  • Process Connection:3/16″ I.D. flexible tubing
  • Enclosure Rating:NEMA 13 (IP 54)Weight:3.5 oz (100 g)Accessories:6 ft (1.8m) flexible tubing, (2) Static pressure fittings, C type mounting bracket, and mounting screws
  • Repeatability:2Þadband:approximately 10% of max set point

Sensocon USA Differential Pressure Switch Series 104 – 1

 
 
Model No.104-1
Weight173 gm
Electrical Rating2A @ 250 V
BrandSensocon
Repeatability2%
Max Pressure1000 Pa
Process Connection3/16″


The Series 104 Differential Pressure Switch is a low-cost easy to use differential pressure switch for very low pressure applications. The differential pressure switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for2A @ 250V and can be set as low as 0.08” w.c. (20 Pa).

Specification:

  • Media:Air and compatible gases
  • Max Pressure:20″ w.c. (5000 Pa)Temperature Limits:5 to 140°F (-15 to 60°C)Electrical Rating:2A @ 250 V
  • Electrical Connection:Screw terminals
  • Process Connection:3/16″ I.D. flexible tubing
  • Enclosure Rating:NEMA 13 (IP 54)Weight:3.5 oz (100 g)Accessories:6 ft (1.8m) flexible tubing, (2) Static pressure fittings, C type mounting bracket, and mounting screws
  • Repeatability:2%
  • Deadband:approximately 10% of max set point

Sensocon USA Differential Pressure Switch Series 104 – 2

 
 
Model No.104-2
Weight3.5 oz (100 g)
Electrical Rating2A @ 250 V
BrandSensocon
MediaAir and compatible gases
Max Pressure20″ w.c. (5000 Pa)
Temperature Limits5 to 140 DegreeF (-15 to 60 DegreeC)
Repeatability2%

The Series 104 Differential Pressure Switch is a low-cost easy to use differential pressure switch for very low pressure applications. The differential pressure switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for2A @ 250V and can be set as low as 0.08” w.c. (20 Pa).

Specification:
  • Media:Air and compatible gases
  • Max Pressure:20″ w.c. (5000 Pa)Temperature Limits:5 to 140°F (-15 to 60°C)Electrical Rating:2A @ 250 V
  • Electrical Connection:Screw terminals
  • Process Connection:3/16″ I.D. flexible tubing
  • Enclosure Rating:NEMA 13 (IP 54)Weight:3.5 oz (100 g)Accessories:6 ft (1.8m) flexible tubing, (2) Static pressure fittings, C type mounting bracket, and mounting screws
  • Repeatability:2%
  • Deadband:approximately 10% of max set point
 

Series 104 – Differential Pressure Switch

 
 
Media TypeAir and compatible gases
Model No.Series 104
Weight3.5 oz (100 g)
Electrical Rating2A @ 250 V
BrandSensocon
Max Pressure20″ w.c. (5000 Pa)
Temperature Limits5 to 140 DegreeF (-15 to 60 DegreeC)
Repeatability2%


The Series 104 Differential Pressure Switch is a low-cost easy to use switch
for very low pressure applications. The switch can monitor positive, negative,
or differential pressure and with an easy to adjust set point knob makes field
set up and adjustment hassle free. The differential pressure switch includes
a SPDT relay rated for 2A @ 250V and can be set as low as 0.08″ w.c. (20 Pa).

Dwyer DM-1000 Digimag Differential Pressure Gauge, Uncategorized

Dwyer DM-1000 Digimag Differential Pressure Gauge

Nov 1, 2021 by admin 0 Comments

Dwyer USA DM-1103 DigiMag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
BrandDwyer USA
ModelDM-1103
Measuring Range0-0.5″ w.c.
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1103 DigiMag Digital Pressure Gage Dwyer USA DM-1103 DigiMag Digital Pressure Gage With Range of 0 to 0.5 in w.c. The Dwyer DM-1103 DigiMag Digital Pressure Gage has a range from 0-0.5″ w.c. and with a resolution of 0.001 w.c. The DigiMag® Series DM-1000 Digital Differential Pressure and Flow Gagesâ€?? widows: 2;â€?? background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer Dm-1104 Digimag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Model NumberDM-1104
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and reputability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass Filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Process Connections1/8″ (3 mm) I.D. tubing.
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE
Current Consumption5 mA maximum


The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1109 DigiMag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Model NumberDM-1109
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W).
Measuring Range(mm)0-50 MMWC
BrandDwyer USA
ApplicationIndustrial, Laboratory
Scale RangeRange 0-15″ w.c.
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Electrical ConnectionsRemovable terminal block for 16 to 26 AWG
Enclosure RatingNEMA 4X (IP66).
Agency ApprovalsCE

Dwyer USA DM-1109 DigiMag Digital Pressure Gage With Range of 0 to 15 in w.c. The Dwyer DM-1109 Digi Mag Digital Pressure Gage has a range from 0-15″ w.c. and with a resolution of 0.010 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages” widows: 2;” background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur.  Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. Digi Mag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1110 Digi Mag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-25″ w.c.
Model No.DM-1110
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1110 Digi Mag Digital Pressure Gage With Range of 0 to 25 in w.c. The Dwyer DM-1110 Digi Mag Digital Pressure Gage has a range from 0-25″ w.c. and with a resolution of 0.010 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages” widows: 2;” background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The Digi Mag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. Digi Mag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1111 Digi Mag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-50″ w.c.
BrandDwyer USA
Model No.DM-1111
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1111 Digi Mag Digital Pressure Gage With Range of 0 to 50 in w.c. The Dwyer DM-1111 Digi Mag Digital Pressure Gage has a range from 0-50″ w.c. and with a resolution of 0.020 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1112 Digi Mag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-100″ w.c.
Model No.DM-1112
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1112 Digi Mag Digital Pressure Gage With Range of 0 to 100 in w.c. The Dwyer DM-1112 Digi Mag Digital Pressure Gage has a range from 0-100″ w.c. and with a resolution of 0.100 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The Digi Mag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Series DM-1000 DigiMag Digital Differential Pressure Gages

 
Minimum Order Quantity1 Number
Measuring Range(mm)DM-1000
Model No.Dwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Display: 4-digit LCD (digits0.60″ H x 0.33″ W)
Power Requirements9V battery or external power supply 9-24 VDC. Battery included but not connected
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Series DM-1000 DigiMag Digital Differential Pressure and Flow Gages

 

ModelDescription
DM-1102DigiMag® differential digital pressure gage, range 0-0.25″ w.c.
DM-1103DigiMag® differential digital pressure gage, range 0-0.5″ w.c.
DM-1104DigiMag® differential digital pressure gage, range 0-1″ w.c.
DM-1105DigiMag® differential digital pressure gage, range 0-2″ w.c.
DM-1107DigiMag® differential digital pressure gage, range 0-5″ w.c.
DM-1108DigiMag® differential digital pressure gage, range 0-10″ w.c.
DM-1109DigiMag® differential digital pressure gage, range 0-15″ w.c.
DM-1110DigiMag® differential digital pressure gage, range 0-25″ w.c.
DM-1111DigiMag® differential digital pressure gage, range 0-50″ w.c.
DM-1112DigiMag® differential digital pressure gage, range 0-100″ w.c.
DM-1122DigiMag® differential digital pressure gage, range 0.25-0-0.25″ w.c.
DM-1123DigiMag® differential digital pressure gage, range 0.5-0-0.5″ w.c.
DM-1124DigiMag® differential digital pressure gage, range 1-0-1″ w.c.
DM-1125DigiMag® differential digital pressure gage, range 2-0-2″ w.c.
DM-1127DigiMag® differential digital pressure gage, range 5-0-5″ w.c.
DM-1128DigiMag® differential digital pressure gage, range 10-0-10″ w.c.

DWYER USA DPG-200 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)14.70-0 PSI
BrandDwyer USA
Model No.DPG-200
Accuracy0.25% F.S. +-1 least significant digit.
Weight8.84 oz (275 g).
Size3.00″ OD x 1.90 deep (not including cables).
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%.
Power Consumption0.8 W max

DWYER USA DPG-200 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 14.70-0 The SERIES DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

Product Applications:
  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control

 

DPG-200    
  • Digital pressure gage, selectable engineering units: -14.70-0 psig, -1.033 kg/cm², -1.013 bar, -29.93″ Hg, -33.94 ft w.c., -33.06 ft seawater @ 4°C, -101.4 kPa, -235.2 oz/in², -407.3″ w.c., -1013 mbar, -1034 cm w.c., -760.7 mm Hg.
 

DWYER USA DPG-202 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)15.00 PSI
BrandDwyer USA
Model No.DPG-202
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g).
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Output Signal4 to 20 mA

 

DWYER USA DPG-202 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 15 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-202

Digital pressure gage, selectable engineering units: 15.00 psig, 1.055 kg/cm², 1.034 bar, 30.54″ Hg, 34.61 ft w.c., 33.73 ft seawater @ 4°C, 103.4 kPa, 240 oz/in², 415.2″ w.c., 1034 mbar, 1055 cm w.c., 775.7 mm Hg.

Product Applications:

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control

DWYER USA DPG-203 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
Measuring Range(mm)30 psig
Model No.DPG-203
Accuracy0.25% F.S. +-1 least significant digit.
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%

 

DWYER USA DPG-203 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 30 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-203

Digital pressure gage, selectable engineering units: 30.00 psig, 2.109 kg/cm², 2.069 bar, 61.08″ Hg, 69.21 ft w.c., 67.45 ft seawater @ 4°C, 206.9 kPa, 480 oz/in², 830.4″ w.c., 2069 mbar, 2109 cm w.c., 1551 mm Hg.

Product Applications:

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control

DWYER USA DPG-204 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Measuring Range(mm)50 psig
BrandDwyer USA
Model No.DPG-204
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS.
Temperature Limits0 to 158 frh deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%

DWYER USA DPG-204 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 50 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-204

Digital pressure gage, selectable engineering units: 50.00 psig, 3.515 kg/cm², 3.448 bar, 101.8″ Hg, 115.4 ft w.c., 112.4 ft seawater @ 4°C, 344.8 kPa, 800 oz/in², 1384″ w.c., 3448 mbar, 3515 cm w.c., 2586 mm Hg.

Product Applications

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-205 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits).
BrandDwyer USA
Measuring Range(mm)100 psig
Model No.DPG-205
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Power Consumption0.8 W max.

DWYER USA DPG-205 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 100 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-205

Digital pressure gage, selectable engineering units: 100.0 psig, 7.03 kg/cm², 6.895 bar, 203.6″ Hg, 230.7 ft w.c., 224.8 ft seawater @ 4°C, 689.5 kPa, 1600 oz/in², 2768″ w.c., 6895 mbar, 7031 cm w.c., 5172 mm Hg.

Product Applications

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-206 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)200 psig
BrandDwyer USA
Model No.DPG-206
Accuracy0.25% F.S. +-1 least significant digit. (Includes linearity, hysteresis, repeat-ability)
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%.
Output Signal4 to 20 mA
Power Consumption0.8 W max

DWYER USA DPG-206 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 200 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-206

Digital pressure gage, selectable engineering units: 200.0 psig, 14.06 kg/cm², 13.79 bar, 407.2″ Hg, 461.4 ft w.c., 449.7 ft seawater @ 4°C, 1379 kPa, 3200 oz/in², 5536″ w.c.

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-207 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)300 psig
BrandDwyer USA
Model No.DPG-207
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g).
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Temperature Limits0 to 158 deg F (0 to 70 deg C).
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Output Signal4 to 20 mA

DWYER USA DPG-207 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 300 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-207

Digital pressure gage, selectable engineering units: 300.0 psig, 21.09 kg/cm², 20.69 bar, 610.8″ Hg, 692.1 ft w.c., 674.5 ft seawater @ 4°C, 2069 kPa, 4800 oz/in², 8304″ w.c

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-208 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits).
Measuring Range(mm)500 psig
BrandDwyer USA
Model No.DPG-208
Accuracy0.25% F.S. +-1 least significant digit. (Includes linearity, hysteresis, repeatability)
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables).
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Output Signal4 to 20 mA
Power Consumption0.8 W max

Series DPG-208 Digital Pressure Gage, 500 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-208

Digital pressure gage, selectable engineering units: 500.0 psig, 35.15 kg/cm², 34.48 bar, 1018″ Hg, 1154 ft w.c., 1124 ft seawater @ 4°C, 3448 kPa, 8000 oz/in².

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-209 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
ModelDPG-209
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Consumption0.8 W max
Output Signal4 to 20 mA

DWYER USA DPG-209 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 1000 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-209

Digital pressure gage, selectable engineering units: 1000 psig, 70.3 kg/cm², 68.98 bar, 2036″ Hg, 2307 ft w.c., 2248 ft seawater @ 4°C, 6895 kPa..

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

Dwyer Usa Dpg-210 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
ModelDPG-210
Measuring Range3000 psig
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS.
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Output Signal4 to 20 mA
loop Resistance600 ohms maximum
Power Consumption0.8 W max

DWYER USA DPG-210 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 3000 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-210

Digital pressure gage, selectable engineering units: 3000 psig, 210.9 kg/cm², 206.9 bar, 6108″ Hg, 6921 ft w.c., 6745 ft seawater @ 4°C.

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-211 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
ModelDPG-211
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Consumption0.8 W max.

DWYER USA DPG-211 Digital Pressure Gage Digital pressure gage, selectable engineering units: 5000 psig, 351.5 kg/cm², 344.8 bar. 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-211

Digital pressure gage, selectable engineering units: 5000 psig, 351.5 kg/cm², 344.8 bar.

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

Dwyer USA DM-1102 DigiMag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)0-0.25″ w.c.
BrandDwyer USA
Model No.DM-1102
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1102 DigiMag Differential Pressure Gauge DigiMag Differential Digital Pressure Gage,Range 0-0.25″WC The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1105 DigiMag Differential Pressure & Flow Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)0-2″ w.c.
Model No.DM-1105
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1105 DigiMag Differential Pressure & Flow Gauge (0-2″w.c.) The Dwyer DM-1105 DigiMag Digital Pressure Gage has a range from 0-0.2″ w.c. and with a resolution of 0.001 w.c. The DigiMag® Series DM-1000 Digital Differential Pressure and Flow Gages” widows: 2;” background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted
 

Dwyer Usa Dm-1107 Digimag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-5″ w.c
BrandDwyer USA
Model No.DM-1107
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic.
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum.
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer Usa Dm-1107 Digimag Differential Pressure Gauge Dwyer Instruments DM-1107 DigiMag? Differential Digital Pressure Gage,0-5″w.c The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1108 DigiMag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-10″ w.c.
Model No.DM-1108
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below.
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Weight:1.18 lb (535 g)
Agency ApprovalsCE


Dwyer USA DM-1108 DigiMag Differential Pressure Gauge Dwyer Instruments DM-1108 DigiMag Differential Digital Pressure Gage,Range 0-10″WC The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1123 Digi Mag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
BrandDwyer USA
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)0.5-0-0.5″ w.c.
Model No.DM-1123
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1123 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1123 Digi Mag Differential Pressure Gauge 0.50-0-0.50 in H20 The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. Digi Mag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1122 Digi Mag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0.25-0-0.25″ w.c.
Model No.DM-1122
ModelDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Process Connections1/8″ (3 mm) I.D. tubing.
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1122 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1122 Digi Mag Differential Pressure Gauge Range 0.25-0-0.25″ w.c.0 
The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. Digi Mag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1124 DigiMag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 1-0-1″ w.c.
Model No.DM-1124
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Pastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1124 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1124 DM-1124 DigiMag® differential digital pressure gage, range 1-0-1″ w.c. The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1125 Digi Mag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
BrandDwyer USA
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 2-0-2″ w.c.
Model No.DM-1125
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Agency ApprovalsCE
Enclosure RatingNEMA 4X (IP66)
Process Connections1/8″ (3 mm) I.D. tubing


Dwyer USA DM-1125 Digi Mag Differential Pressure Gauge 
Dwyer Instruments DM-1125 DM-1124 DigiMag® differential digital pressure gage, range 2-0-2″ w.c. The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1128 DigiMag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 10-0-10″ w.c.
Model No.DM-1128
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1128 DigiMag Differential Pressure Gauge Dwyer Instruments DM-1128 DM-1124 DigiMag® differential digital pressure gage, range 10-0-10″ w.c. The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1127 Digi Mag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)5-0-5″ w.c.
BrandDwyer USA
Model No.DM-1127
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Display: 4-digit LCD0.60″ H x 0.33″ W)
Current Consumption5 mA maximum
Enclosure RatingNEMA 4X (IP66)


Dwyer USA DM-1127 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1127 DM-1124 DigiMag® differential digital pressure gage, range 5-0-5″ w.c. The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Series 629 Wet Differential Pressure Transmitter Wholesaler India DELHI, Uncategorized

Series 629 Wet Differential Pressure Transmitter Wholesaler India DELHI

Nov 1, 2021 by admin 0 Comments

Series 629 Wet/Wet Differential Pressure Transmitter

 
Minimum Order Quantity1 Number
Usage/ApplicationIndustrial
Model Name/NumberSeries 629
BrandDwyer
Protection TypeIP54
Measuring Range20-200Pa to 200-4000Pa
Operating Temperature-20 deg C to +60 deg C

Series 629 Wet/Wet Differential Pressure Transmitter

0.5% Accuracy, NEMA 4X Enclosure

  • This Series Is No Longer Available, See Series 629C For The Suggested Replacement.

 

The SERIES 629 Differential Pressure Transmitter Monitors Differential Pressure Of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block, zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction.


FEATURES/BENEFITS

  • Versatile, high-accuracy device for liquid or gas supports designs requiring more precise measurements in support of application
  •  Minimum components provide excellent response and reliability
  •  Span and zero controls reduce installation and service time
  •  Terminal block reduces wiring difficulties saving installation time
  •  Optional LED indicator provides local status to identify operational conditions.
  • Optional 3-way valve manifold supports higher line pressures or simplifying removal of transmitter without interrupting process


APPLICATIONS

  • Flow Elements 
  • Heat Exchangers
  • Filters
  • Coils 
  • Chiller 
  • Pumps


Specifications

  • Service:Compatible Gases and Liquids.
  • Wetted Materials:Without valve: 316, 316L SS. Additional wetted parts with 3-way valve option: Buna-N, silicone grease, PTFE, brass 360, copper, reinforced acetal copolymer.
  • Accuracy:±0.5% F.S. (includes linearity, hysteresis, and repeatability).
  • Temperature Limits:0 to 200°F (-18 to 93°C).
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C).
  • Pressure Limits:See Ordering page.
  • Thermal Effect:0.02%/°F (0.036%/°C) includes zero and span.
  • Power Requirements:13 to 30 VDC.
  • Output Signal:4 to 20 mA. Optional 0 to 5 or 0 to 10 VDC.
  • Response Time:50 ms.
  • Loop Resistance:0 to 1300 Ω maximum for current output. For voltage outputs, minimum load resistance: 2000 Ω.
  • Electrical Connections:Terminal block; 1/2″ female NPT conduit.
  • Process Connection:1/4″ female NPT.
  • Enclosure Rating:Designed to meet NEMA 4X (IP66).
  • Mounting Orientation:Mount in any position.
  • Weight:10.1 oz (286 g).
  • Agency Approvals:CE.
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale.

Dwyer 629C-02-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationMonitor Differential Pressure Across,Flow Elements,Heat Exchangers,Filters,Pumps,Coils,Chiller
Model Name/NumberDwyer 629C-02-CH-P2-E5-S1
BrandDwyer USA
Voltage4 to 20 mA. Optional 0-5 or 0-10 VDC
Accuracy+-0.5% F.S. (includes linearity, hysteresis, and repeatability)
Operating Range10 PSID
Product Weight10.1 oz (286 g)
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Country of OriginMade in India

Dwyer 629C-02-CH-P2-E5-S1 Wet/Wet Differential Pressure Transmitter Range 10 psid

  • Model: 629C  
  • Order No: 629C-02-CH-P2-E5-S1

Monitors Differential Pressure of Air and Compatible Gases and liquids with 0.5% accuracy with a working pressure 20 psi and an over pressure 100 psi.

DESCRIPTION


Dwyer 629C Series Offers


Features

  • Versatile, high accuracy device for liquid or gas supports designs requiring more precise measurements in support of application
  • Minimum components provide excellent response and reliability
  • Zero control reduces installation and service time
  • Terminal block reduces wiring difficulties saving installation time

New Features

  • Powered by either DC or AC– take advantage of most readily available power source reducing installation costs.
  • Optional LCD does not need a separate power supply – lowers installed cost.
  • Selectable voltage ranges on voltage units – provides flexible choice for changing designs or matching inputs for controller equipment being used to monitor and control. Additionally minimizes number of stocked units.
  • Push button zero (versus trim pot adjustment)– easier more simpler zeroing provides easy install and calibration reducing installation time and possibility of operator error.
  • Rugged NEMA 4X enclosure even with optional LCD permits use in many environments.
  • Locking Hex nut connection prevents inadvertent stripping out of process connection.

Functional Specifications

  • Service: Compatible gases and liquids
  • Wetted Materials: Without valve: 316, 316L SS. Additional wetted parts with valve option: Buna-N, silicone grease, PTFE, brass 360, copper, and reinforced copolymer
  • Accuracy: ±0.5% F.S. (includes linearity, hysteresis, and repeatability)
  • ±1% FS/year.
  • Compensated Temperature Limits: 0 to 175°F (-18 to 79°C)
  • Thermal Effect: 0.04%/°F (0.072%/°C) includes zero and span
  • Output Signal: 4 to 20 mA. Optional 0-5 or 0-10 VDC
  • Response Time: 400 msec
  • Loop Resistance: Current output 0-1250 Ω maximum, Rmax = 50(Vps-10, minimum load resistance: 5 kΩ
  • Current Consumption: 28 mA (max).
  • Electrical Connections: Terminal block; 1/2″ female NPT conduit
  • Process Connection: 1/4″ female NPT
  • Optional 4-1/2 digit LCD field attachable display
  • Mounting Orientation: Not position sensitive

General Specifications


  • Power Requirements: 13 to 30 VDC
  • Weight: 10.1 oz (286 g)

Applications


  • Monitor Differential Pressure Across:
  • Flow Elements
  • Heat Exchangers
  • Filters
  • Pumps
  • Coils
  • Chiller
  • Calibration Lab

INCLUDED
What’s Included With The Dwyer 629C Dwyer 629C-02-CH-P2-E5-S1 Wet/Wet Differential Pressure Transmitter Range 10 psid

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-R2-P1-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-R2-P1-E5-S1
  • Description–Wet/wet Differential Pressure Transmitter,Range 10 PSID,Working Pressure 20 PSI,Over Pressure 100 PSI With Remote Sensors And 20’Shielded Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories
A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-R2-P1-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India


Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Model-629C-02-R2-P1-E5-S1
Description-Wet Differential Pressure Transmitter,Range 10 PSID,Working Pressure 20 PSI,Over Pressure 100 PSI With Remote Sensors and 20′ Shielded Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button,are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X IP66 construction,which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S.includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories
A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-CH-P2-E5-S3-3
  • Description-Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 10 PSID,Working Pressure 50 PSI,Over Pressure 250 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India


Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-CH-P2-E5-S1-3
  • Description – Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 10 psid,Conduit Housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA


The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-CH-P2-E5-S3
  • Description-Wet/Wet Differential Pressure Transmitter,Range 10 PSID,Conduit Housing,1/4″ NPT Female Process Connections,0-10 V output.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-03-CH-P2-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S1
  • Description–Wet/Wet Differential Pressure Transmitter, Range 25 PSID, Working Pressure 50 PSI, Over Pressure 120 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-R6-P1-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-R6-P1-E5-S1
  • Description–Wet/Wet Differential Pressure Transmitter, Range 10 PSID, Working Pressure 20 PSI, Over Pressure 100 PSI With Remote Sensors And 20′ Armored Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters
 

Series 629C Wet/Wet Differential Pressure Transmitter

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberSeries 629C
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity,hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Country of OriginMade in India

Series 629C Wet/Wet Differential pressure Transmitter

0.5% Accuracy, NEMA 4X (IP66) Enclosure

The Series 629C Wet/Wet Differential Pressure Transmitter monitors Differential Pressure of Air and Compatible gases and liquids with 0.5% accuracy.The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button,are easily accessed under the top cover.
The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20” lengths.Installation is much simpler, reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction,which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Model Description

  • 629C-02-CH-P2-E5-S1-Range 10 psid,Working Pressure 20 psi,Over Pressure 100 psi.
  • 629C-02-CH-P2-E5-S1-3-With 3-Way Valve Package, Range 10 psid,conduit housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA
  • 629C-02-CH-P2-E5-S3-Range 10 Psid,Conduit Housing, 1/4″ NPT Female Process Connections,0-10 V output.
  • 629C-02-CH-P2-E5-S3-3-with 3-way valve package, range 10 psid,working pressure 50 psi,over Pressure 250 psi.
  • 629C-02-R2-P1-E5-S1-Range 10 psid,working pressure 20 psi,over pressure 100 psi with remote sensors and 20” shielded cable.
  • 629C-02-R6-P1-E5-S1-Range 10 psid,working pressure 20 psi,over pressure 100 psi with remote sensors and 20” armored cable.
  • 629C-03-CH-P2-E5-S1-Range 25 psid,working pressure 50 psi,over pressure 120 psi.
  • 629C-03-CH-P2-E5-S1-3-With 3-way valve package, range 25 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit,4-20 mA
  • 629C-03-CH-P2-E5-S3-Range 25 psid,conduit housing, 1/4″ NPT female process connections,0-10 V output.
  • 629C-03-CH-P2-E5-S3-3-With 3-way valve package, range 25 psid, working pressure 50 psi,over pressure 250 psi.
  • 629C-03-R1-P1-E5-S3-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” shielded cable.
  • 629C-03-R5-P1-E5-S3-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” armored cable.
  • 629C-04-CH-P2-E5-S1-Range 50 psid,working pressure 100 psi,over pressure 250 psi.
  • 629C-04-CH-P2-E5-S1-3-With 3-way valve package, range 50 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit, 4-20 mA
  • 629C-04-CH-P2-E5-S3-Range 50 psid,conduit housing, 1/4″ NPT female process connections,0-10 V output.
  • 629C-04-CH-P2-E5-S3-3-With 3-way valve package, range 50 psid, working pressure 100 psi,over pressure 250 psi.
  • 629C-05-CH-P2-E5-S1-Range 100 psid,working pressure 200 psi,over pressure 500 psi.
  • 629C-05-CH-P2-E5-S1-3-With 3-way valve package, range 100 psid, conduit housing,NEMA 4X,1/4″ female NPT,1/2″ female NPT conduit,4-20 mA
  • 629C-05-CH-P2-E5-S3-Range 100 psid, conduit housing,1/4″ NPT female process connections,0-10 V output.
  • 629C-05-CH-P2-E5-S3-3-With 3-way valve package, range 100 psid,working pressure 200 psi,over pressure 500 psi.
  • 629C-05-R1-P1-E5-S3-Range 100 psid,working pressure 200 psi, over pressure 500 psi with remote sensors and 10” shielded cable.
  • 629C-05-R5-P1-E5-S3-Range 100 psid,working pressure 200 psi,over pressure 500 psi with remote sensors and 10” armored cable.
 

Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S1-3
  • Description-With 3-way valve package, range 25 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit,4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

 

Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S3
  • Description-With 3-way valve package, range 25 psid, working pressure 50 psi,over pressure 250 psi.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected)
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S3-3
  • Description-Range 25 psid,conduit housing,1/4″ NPT female process connections,0-10 V output.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID

  • Model –  629C-04-CH-P2-E5-S3-3
  • Description-With 3-Way Valve Package,Range 50 PSID,Working Pressure 100 PSI,Over Pressure 250 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID

  • Model – 629C-04-CH-P2-E5-S3 
  • Description-Range 50 psid,conduit housing,1/4″ NPT Female Process Connections,0-10 V Output..

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID

  • Model – 629C-04-CH-P2-E5-S1-3
  • Description-With 3-way valve package,range 50 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit, 4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID

  • Model – 629C-04-CH-P2-E5-S1
  • Description-Range 50 psid,working pressure 100 psi,over pressure 250 psi.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-R1-P1-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-R1-P1-E5-S3
  • Description-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” shielded cable.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-R5-P1-E5-S3
BrandDWYER USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India


Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-R5-P1-E5-S3 
  • Description – Range 100 psid,working pressure 200 psi,over pressure 500 psi with remote sensors and 10” armored cable.


The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-R1-P1-E5-S3
BrandDWYER USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-R1-P1-E5-S3
  • Description–With 3-way valve package, range 100 psid, conduit housing,NEMA 4X,1/4″ female NPT,1/2″ female NPT conduit,4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range100 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India


Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S3-3
  • Description–Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 100 PSID,Working Pressure 200 PSI,Over Pressure 500 PSI.


The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range100 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S3
  • Description–Wet/Wet Differential Pressure Transmitter, Range 100 PSID, Conduit Housing, 1/4″ NPT Female Process Connections, 0-10 V Output.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range100 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S1-3
  • Description–Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 100 PSID,Conduit Housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S1
BrandDWYER USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S1 
  • Description – Wet/Wet Differential Pressure Transmitter, Range 100 PSID, Working Pressure 200 PSI, Over Pressure 500 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Pack
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-R5-P1-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-R5-P1-E5-S3
  • Description-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” armored cable.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters