SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

SERIES DM DIGIMAG® DIFFERENTIAL PRESSURE TRANSMITTER

May 22, 2022 by admin 0 Comments SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

SERIES DM DIGIMAG® DIFFERENTIAL PRESSURE TRANSMITTER

Same Size as Standard Magnehelic® Differential Pressure Gage

The Series DM DigiMag® Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. The polycarbonate molded housing features integral pressure connections, which reduces installation time. Digital push-button zero and span simplify calibration over typical turn-potentiometers. A single push-button allows field selection of 4 to 6 engineering units, depending on the range.

PRODUCT APPLICATIONS

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

MODELS & ORDERING

Model	Description
DM-001	Differential digital pressure transmitter, range 0-0.1″ w.c.
DM-002	Differential digital pressure transmitter, range 0-0.25″ w.c.
DM-003	Differential digital pressure transmitter, range 0-0.5″ w.c.
DM-004	Differential digital pressure transmitter, range 0-1.0″ w.c.
DM-005	Differential digital pressure transmitter, range 0-2.0″ w.c.
DM-007	Differential digital pressure transmitter, range 0-3.0″ w.c.
DM-008	Differential digital pressure transmitter, range 0-5.0″ w.c.
DM-202	Differential digital pressure transmitter, range 0.25-0-0.25″ w.c.
DM-203	Differential digital pressure transmitter, range 0.5-0-0.5″ w.c.

SPECIFICATIONS

Service:Air and non-combustible, compatible gases.
Wetted Materials:Consult factory.
Housing Material:Polycarbonate.
Accuracy:±1% FSO for all ranges except 0.25 in w.c. @ ±2% FSO, and ranges at or below ±0.1 in w.c. @ ±4% FSO.
Stability:< ±1%/year FSO.

Pressure Limits:Ranges > 1 in w.c.: 6 psi max operation, 6 psi burst; Ranges = 1 in w.c.: 3.6 psi max operation, 6 psi burst.
Temperature Limits:-4 to 158°F (-20 to 70°C).
Thermal Effect:0.036% FS/°C (0.02% FS/°F).
Power Requirements:10-35 VDC (2-wire).
Output Signal:4-20 mA (2-wire).
Zero and Span Adjustments:Push-button.
Loop Resistance:0 to 1250 Ω max.
Current Consumption:21 mA max.
Electrical Connections:Screw-type terminals.
Process Connections:Male ports on side for 1/8″, 3/16″, 1/4″, 5 mm, 6 mm ID flexible tubing.
Enclosure Rating:NEMA 4X (IP66).
Mounting Orientation:Not sensitive to position.
Size:5″ OD (127 mm) x 1.9″ (48 mm) deep.
Weight:7.04 oz (200 g).
Agency Approvals:CE.

FEATURES

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gage, as both use the same diameter cutout

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-001 DigiMag Differential Pressure Transmitter, 0.1 inWC

May 21, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-001, Dwyer DM-002, Dwyer DM-003, Dwyer DM-004, Dwyer DM-005, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-001 DigiMag Differential Pressure Transmitter, 0.1 inWC

Model: DM-001

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 0.1 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-001 Offers

Specifically designed to mount in a standard Magnehelic® gauge cutout, this pressure transmitter features a polycarbonate molded housing with integral pressure connections, reducing installation time. In addition, the digital push-button zero and span simplify calibration over typical turn-potentiometers, and a single push-button allows field selection of multiple engineering units.

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-001 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	0.1 inWC
Accuracy	±4% FSO
Stability	<±1%/year FSO
Limits	Pressure: 3.6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-001

Dwyer DM-001 DigiMag Differential Pressure Transmitter, 0.1 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-002 DigiMag Differential Pressure Transmitter, 0.25 inWC

May 21, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-002, Dwyer DM-003, Dwyer DM-004, Dwyer DM-005, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-002 DigiMag Differential Pressure Transmitter, 0.25 inWC

Model: DM-002

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 0.25 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-002 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-002 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	0.25 inWC
Accuracy	±2% FSO
Stability	<±1%/year FSO
Limits	Pressure: 3.6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-002

Dwyer DM-002 DigiMag Differential Pressure Transmitter, 0.25 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-003 DigiMag Differential Pressure Transmitter, 0.5 inWC

May 21, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-003, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-003 DigiMag Differential Pressure Transmitter, 0.5 inWC

Model: DM-003

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 0.5 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-003 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-003 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	0.5 inWC
Accuracy	±1% FSO
Stability	<±1%/year FSO
Limits	Pressure: 3.6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-003

Dwyer DM-003 DigiMag Differential Pressure Transmitter, 0.5 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-004 DigiMag Differential Pressure Transmitter, 1 inWC

May 20, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-004, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-004 DigiMag Differential Pressure Transmitter, 1 inWC

Model: DM-004

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 1 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-004 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-004 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	1 inWC
Accuracy	±1% FSO
Stability	<±1%/year FSO
Limits	Pressure: 3.6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-004

Dwyer DM-004 DigiMag Differential Pressure Transmitter, 1 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-005 DigiMag Differential Pressure Transmitter, 2 inWC

May 20, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-005, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-005 DigiMag Differential Pressure Transmitter, 2 inWC

Model: DM-005

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 2 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-005 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

What’s included with the Dwyer DM-005

Dwyer DM-005 DigiMag Differential Pressure Transmitter, 2 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-007 DigiMag Differential Pressure Transmitter, 3 inWC

May 20, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-002, Dwyer DM-003, Dwyer DM-004, Dwyer DM-005, Dwyer DM-007, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-007 DigiMag Differential Pressure Transmitter, 3 inWC

Model: DM-007

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 3 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-007 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-007 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	3 inWC
Accuracy	±1% FSO
Stability	<±1%/year FSO
Limits	Pressure: 6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-007

Dwyer DM-007 DigiMag Differential Pressure Transmitter, 3 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-008 DigiMag Differential Pressure Transmitter, 5 inWC

May 19, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-001, Dwyer DM-002, Dwyer DM-003, Dwyer DM-004, Dwyer DM-005, Dwyer DM-008, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-008 DigiMag Differential Pressure Transmitter, 5 inWC

Model: DM-008

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of 5 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-008 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-008 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	5 inWC
Accuracy	±1% FSO
Stability	<±1%/year FSO
Limits	Pressure: 6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-008

Dwyer DM-008 DigiMag Differential Pressure Transmitter, 5 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-202 DigiMag Differential Pressure Transmitter, ±0.25 inWC

May 18, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-001, Dwyer DM-002, Dwyer DM-003, Dwyer DM-004, Dwyer DM-005, Dwyer DM-007, Dwyer DM-202, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-202 DigiMag Differential Pressure Transmitter, ±0.25 inWC

Model: DM-202

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of ±0.25 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-202 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-202 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	±0.25 inWC
Accuracy	±2% FSO
Stability	<±1%/year FSO
Limits	Pressure: 3.6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-202

Dwyer DM-202 DigiMag Differential Pressure Transmitter, ±0.25 inWC

SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-203 DigiMag Differential Pressure Transmitter, ±0.5 inWC

May 18, 2022 by admin 0 Comments DigiMag Differential Pressure Transmitter, Dwyer DM-001, Dwyer DM-002, Dwyer DM-003, Dwyer DM-004, Dwyer DM-005, Dwyer DM-007, Dwyer DM-008, SERIES DM DIGIMAG DIFFERENTIAL PRESSURE TRANSMITTER

Dwyer DM-203 DigiMag Differential Pressure Transmitter, ±0.5 inWC

Model: DM-203

Senses the pressure of air and compatible gases, this differential pressure transmitter features a pressure range of ±0.5 inWC and has a 4 to 20 mA output. Fast and easy to set up, this transmitter is suitable for fan control, static pressures in ducts or buildings, room pressurization monitoring, and differential pressure across filters.

Dwyer DM-203 Offers

Features

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gauge, as both use the same diameter cutout

Applications

Differential pressure across filters
Fan control
Static pressures in ducts or buildings
Room pressurization monitoring

Dwyer DM-203 Specifications

Service	Air and non-combustible, compatible gases
Pressure Range	±0.5 inWC
Accuracy	±1% FSO
Stability	<±1%/year FSO
Limits	Pressure: 3.6 psi maximum operation, 6 psi burst Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect	0.02% FS/°F (0.036% FS/°C)
Output Signal	4 to 20 mA (2-wire)
Zero and Span Adjustments	Push-button
Loop Resistance	0 to 1250 Ω maximum
Current Consumption	21 mA maximum
Connections	Electrical: Screw-type terminals Process: Male ports on side for ⅛”, ³⁄₁₆“, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements	10 to 35 V DC (2-wire)
Enclosure Rating	NEMA 4X (IP66)
Mounting Orientation	Not sensitive to position
Agency Approvals	CE
Housing Material	Polycarbonate
Dimensions	Ø5 x 1.9″ (Ø127 x 48.2 mm)
Weight	7.04 oz (200 g)

What’s included with the Dwyer DM-203

Dwyer DM-203 DigiMag Differential Pressure Transmitter, ±0.5 inWC

Archive: May 22, 2022

SERIES DM DIGIMAG® DIFFERENTIAL PRESSURE TRANSMITTER

Same Size as Standard Magnehelic® Differential Pressure Gage

PRODUCT APPLICATIONS

MODELS & ORDERING

SPECIFICATIONS

FEATURES

Dwyer DM-001 DigiMag Differential Pressure Transmitter, 0.1 inWC

Model: DM-001

Dwyer DM-001 Offers

Dwyer DM-001 Specifications

What’s included with the Dwyer DM-001

Dwyer DM-002 Offers

Dwyer DM-002 Specifications

What’s included with the Dwyer DM-002

Dwyer DM-003 Offers

Dwyer DM-003 Specifications

What’s included with the Dwyer DM-003

Dwyer DM-004 Offers

Dwyer DM-004 Specifications

What’s included with the Dwyer DM-004

Dwyer DM-005 Offers

What’s included with the Dwyer DM-005

Dwyer DM-007 Offers

Dwyer DM-007 Specifications

What’s included with the Dwyer DM-007

Dwyer DM-008 Offers

Dwyer DM-008 Specifications

What’s included with the Dwyer DM-008

Dwyer DM-202 Offers

Dwyer DM-202 Specifications

What’s included with the Dwyer DM-202

Dwyer DM-203 DigiMag Differential Pressure Transmitter, ±0.5 inWC

Dwyer DM-203 Offers

Dwyer DM-203 Specifications

What’s included with the Dwyer DM-203