admin – Page 24 – envirotechdelhi.co.in

AHU Filter Manufacture From India, Uncategorized

AHU Filter Manufacture From India

Oct 29, 2021 by admin 0 Comments

Industrial Filters

Material	Non Woven
Usage/Application	Industrial
Flow Rate	0-500 m^3/hr
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 305 mm
Thickness	10 mic

Industrial Filters

we offer a comprehensive range of industrial filters for pharmaceutical industries.

following are some of the industrial filters for pharmaceutical industries:

microwave filters
pre filters
automotive hdpe filters
fine filter
hepa filter
mini plate hepa filter
ulpa cells filters
super fine filters
high temperature hepa air filter
absolute compact filter
hepa filters (standard flow)
hepa filter terminal box
high efficiency particulate air filter
ulpa filters
deep pleat hepa filters
semi hepa filter
air hepa filters
industrial hepa filters

specifications:

type: niphos water filter
usage: environmental protection
motive force: pressure

Air Handling Unit Filter

Usage/Application	Industrial
Filter Area	4.1 m3
Rated Airflow	425 m3/h
Initial Resistance	235 Pa
Maximum Final Resistance	1300 Pa
Recommended Airflow	250-500 m3/h

Air Handling Unit Filter Keeping track of the latest market development, we are introducing a wide range of Air Handling Unit Filter. Offered in varied sizes and specifications as per the application requirements of our clients, this filter is manufactured using superior quality raw material and employing contemporary technology. In addition, our quality examiner conduct a series of test on this range in order to eradicate any kind of defect in it. Features High dust holding capacity Low maintenance Durability Specifications Efficiency Standard hdpe pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order. Frame Type Available in flange or box type Frame Material Standard model is constructed in galvanized steel. Other models with aluminium anodized/stainless steel frame with or without powder coating are also available on order. Filter Media HDPE and non-woven synthetic. Sealant PU based epoxy Support Large frame size models are made wobble resistant using gi/aluminium/ss support Face Guard No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides Nominal Depth Depth size is available from 1. 0 inches to 6 inches (pre hdpe pleated and rod type) Pressure Drop Initial pressure drop ~2. 5mm wg and recommended final pressure drop is 5-10mm wg Operating Conditions Filter can withstand temperature up to 80c and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused. Application Enviro tech pre filters are most suited for air handling units (ahus), air-conditioning systems, power plants, chemical and fertilizer complexes, green houses, automatic drain holes, paint shops, textile mills, cement factories, laminar air flow units, biosafety hoods, fan filter units (ffu), gas turbine industry, compressor, diesel engines, nuclear power station, cd-rom production industry, picture tube production industry, semi-conductor industry, aeronautical industry and miscellaneou

Industrial AHU Filters

Brand	Enviro Tech Industrial Products
Filtration Grade	Pre Filter
Usage/Application	Commercial
Efficiency	F8
Frame Material	Aluminium
Material	PVC

We also meet the requirement of replacement AHU Filters which are widely used for filtering the air and thus, ensure clean air for healthy breathing. Our assortment of AHU Filters is used for proper ventilation & suctions of AHU’ s installed at hospitals, hotels, malls and other such establishments.

Further, these filters are available in two variants:

Pre Filters
Fine Filters

Salient Features:

Pre -Filter:

Efficiency: 90% down to 5 to 25
Media: Non-woven synthetic that is washable with soap, water, or solvent
Initial pressure drop: 2.5mm WG or as per requirement

Fine Filter:

Efficiency: 99.9% down to 1 to 5
Media: Non-woven synthetic (cleaned by dry air)
Initial pressure drop: 6.5mm WG or as per requirement

Air Conditioning Filter

Efficiency	95%
Application	Air Washer
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Synthetic Fiber, Fiberglass, Microfiber
Filtration Grade	Hepa Filter, Pre Filter
Filter Type	Box Filter
Flow Rate (m3/hr)	2000 CFM
Min Working Pressure	25 mm WC
Material	GI sheet
Product dimension (LBH in mm)	610 X 610 X 50 mm

We produce a wide variety of Air Conditioning Filter. Manufactured using high quality raw substance, these are sourced from our reliable vendors. Our filters are highly efficient in attracting the dust, pollen and also confine pet dander, bacterial and various other viruses. Our company always fulfills the requirement of our clients at affordable prices.

Combination Filter

Brand	Enviro Tech Industrial Products
Filter Type	Suction Filters
Material	Non Woven
Filtration Medium Material	Fiberglass
Usage/Application	Industrial
Shape	Square
Thickness	10 mic
Frame Material	GI

In order to keep pace with the never ending demands of customers, we are involved into offering wide range of Combination Air Filter.

Features:

Perfect design
Long lasting
High performance

Pleated Type Pre Filters

Minimum Order Quantity	12 Number
Filter Medium Material	Non Woven Synthetic Filter Media
Usage/Application	Coolant, Cutting, Oil and Lubricant
Material	Non Woven Synthetic Filter Media
Initial Pressure	25 mm WC
Efficiency	95%
Brand	Enviro Tech Industrial Products

Our company has gained immense experience in the field of presenting Pre Filters Pleated Type.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Yes! I am interested

Flat Type Synthetic Pre Filter

Minimum Order Quantity	10 Number
Size	12″x24″
Usage/Application	Industrial
Material	Synthetic
Shape	Rectangle
Thickness	25-50 mm
Brand	Enviro Tech Industrial Products

High Performance pleated panel air filters for HVAC & General Ventilation used as pre filtration to extend the life of Fine Filters.

Features:

Low initial pressure drop
Disposable/Washable
Maintenance Free
Compact Design

PAH Series HVAC Filter

Brand	Enviro Tech Industrial Products
Material	Non Woven
Usage/Application	Industrial
Effiency	90%
Thickness	20 micron
Face Velocity	1.80 m/sec

We offer wide range of filters for clean rooms and hvac applications, these products are widely used in pharmaceuticals, aeronautical,electronics, capacitor, cables, optical and other industries.

Element Filter Air Primary

Minimum Order Quantity	100 Number
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Non Woven
Usage/Application	Industrial
Color	White
Efficiency	95%
Filtration Grade	Ulpa Filter, Medium Filter, Pre Filter
Medium Material	Microfiber, Synthetic Fiber
Filter Type	Compressed intake filters, Air Filter
Rated Flow(m3/hr)	2000
Min Working Pressure	25 mm WC
Brand	Enviro Tech Industrial Products

Element Filter Air Primary

Manufacturer : Enviro Tech Industrial Products

Size mm – 610 MM X 610 MM X 50 MM

Technical Specifications

Proucts – Element Filter Air Primary Box Type

Material – Frame Aluminium, G.I, Stainless Steel

Media – Synthetic Non Woven With HDPE 40 Mesh On Air Entry Side & Aluminium Expanded On Air Exit Sides.

Efficiency – 95 % Down To 10 Micron EU-7

Sealing – Epoxy Sealing

Gasket – Food Grade

Initial Pressure Drop – More Than 25 MMWC

GI Frame Panel Element Filter

Minimum Order Quantity	100 Number
Brand	Enviro Tech Industrial Products
Filter Type	Suction Filters
Material	Non Woven
Usage/Application	Industrial
Shape	Square
Thickness	5-10 mic
Frame Material	GI

GI Frame Panel Element Filter

we are leading supplier & distributors of gi fram panel element.

manufacturer : enviro tech industrial products
item covered
sl.no.	size mm
	height	width	depth	quentity
01	610 mm	610 mm	50 mm	1

technical specifications

product

gi fram panel element box type

material

frame gi / aluminum

media

synthetic non woven with hdpe 40 mesh on air entry side & alu. expanded on air exit sides.

efficiency

95 % down to 10 micron eu-7

sealing

epoxy sealing

gasket

food grade

initial pressure drop

more than 25 mm/wc

Air Filter Folded Media

Brand	Enviro Tech Industrial Products
Material	Non Woven
Filtration Medium Material	Fiberglass
Filtration Grade	Pre Filter
Synthetic Non Woven Media	GI Mesh
Aluminum Mesh	SS Mesh

With the proficiency of this field, we are capable to present an extensive range of Air Filter Folded Media. in addition, we present these cabins in varied sizes and designs that meet on patron’s demand.

Heating Ventilation Air Conditioning Filter

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Filtration Medium Material	Synthetic Fiber
Filtration Grade	Pre Filter
Filter Type	Box Filter
Material	PVC
Efficiency	99.99%
Temperature	80degC
Air Volume	400 m3/h

Owing to our extensive years of industry experience and profound market understanding, we are providing a wide gamut of Heating Ventilation Air Conditioning Filter. It is widely used in HVAC Systems, AHU Systems and for other industrial blower applications where dust and dirt are to be removed. In order to provide an excellent range to our clients, this filter is manufactured by employing sophisticated technology by our professionals. Apart from this, we provide this filter at industry leading prices. HVAC Filter There is an increasing need for cleaner environment be it office, plants and homes. We have a wide range of air filters used in HVAC Systems, AHU Systems and for other industrial blower applications where dust and dirt are to be removed. We offer a wide range of air filters for this application. They have different names, panel filters, box or flange type, blower filters, pocket filters, mini pleat and deep pleat filters.

Features:

Large dust collection
High efficiency
Optimum quality

Range are available:

Deep Pleat Filter
Mini Pleat Filter
Pocket Filter
Pre Filter
Panel Filter
FRP Coated Air Filter

Pre Filter Flange Type

Filtration Grade	Non Woven Synthetic Filter Media
Filter Type	Panel Filter
Usage/Application	Hospitals Pharmaceuticals
Material	Aluminium Sheet / GI Sheet
Flow Rate	2000 CFM
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Pre Filter Box Type

Filtration Grade	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Usage/Application	Clean Room Application
Material	Aluminium Sheet / GI Sheet
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Pre Filter 3 Micron

Filtration Medium Material	Thermally Bonded Synthetic Filter Media
Filter Type	Box Filter
Usage/Application	Hospitals Pharmaceuticals
Thickness	3 mic
Efficiency	50-99%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Applications:

Laminar Flow Units
Clean Room Application
Hospitals Pharmaceuticals

Pre Filter 10 Micron

Application	Clean Room Application
Filter Medium Material	Non Woven Synthetic Filter Media
Size	610 X 610 X 50 mm
Flow Rate	2000 CFM
Efficiency	95%
Brand	Enviro Tech Industrial Products
Thickness	10 mic

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Applications:

Laminar Flow Units
Clean Room Application
Hospitals Pharmaceuticals

Pre Filter Aluminum Sheet Frame

Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Panel Filter
Usage/Application	Hospitals Pharmaceuticals
Material	Aluminium Sheet / GI Sheet
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Pre Filter GI Sheet Frame

Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Panel Filter
Usage/Application	Ahu
Material	GI Sheet
Efficiency	95 %
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm
Is It Washable	Washable

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Pre Filter Aluminum Section Frame

Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Box Filter
Usage/Application	Air Washer
Material	Aluminium
Shape	Square
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

AHU Air Filters

Application	HVAC system
Material	ABS/PVC
Weight	2.8 kg
Porosity	0.3micron
Header Size	20/25mm

We are involved in manufacturing and supplying a wide range of AHU Air Filters. These are widely recommended by various numbers of clients owing to its uninterrupted functioning and effective performance. these find their wide application in various industries for filtering the air and thus, ensure clean air for healthy breathing. Following the specific requirements of clients, we provide these filters in various range.

Features:

Optimum performance
High functional efficiency
Longer functional life

Furnace HVAC Filter

Brand	Enviro Tech Industrial Products
Material	Non Woven
Usage/Application	Hydraulic Oil, Coolant, Cutting
Frame Material	Aluminium anodized
Size	610x610x50 mm
Thickness	10-20 mic

Our company holds vast experience in this domain and is involved in offering Furnace HVAC Filter.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

AC HVAC Filter

Usage/Application	Hydraulic Oil, Coolant, Cutting
Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Features	Eco Friendly
Size	25mm and 50mm
Efficiency	92%

We bring forth vast industrial experience and expertise in this business, instrumental in AC HVAC Filter.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Pre Filter Pleated Type

Brand	Enviro Tech Industrial Products
Shape	Square
Flow	120 cfm
Initial Pressure Drop	12 mm
Recommended Final Pressure Drop	25 mm
Frame	Al. Andoized/ GL/ SS 304

To meet the various requirements of the customers, we are involved in offering a wide assortment of Pre Filter Pleated Type.

Applications: Laminar flow units, clean room application, hospitals pharmaceuticals

Primary Filters

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Filtration Grade	Hepa Filter
Medium Material	Paper, Synthetic Fiber, Microfiber
Construction	Panel Filter
Rated Flow(m3/hr)	2000 CFM
Min Working Pressure	25 mm WC

Primary Filters

Product Description:

Primary Filters We are acclaimed Manufacturers and suppliers of a qualitative range of AHU Primary Filter. These find their wide application for the industrial ventilation and air conditioning purposes. Made as per world class standards, these filters are extensively acclaimed for high dust loading capacity and excellent performance. Compact sized our AHU Primary Filter ensure easy installation and effective performance.
Features:Excellent performance Finest quality Robustness

About Us

We, Enviro Tech Industrial Products are a Delhi, India based company. Our firm determination, hard work, sincere efforts and professional behavior makes us a leading Manufacturer, Exporter, Trader and Supplier. The clients can purchase superior quality Air Distribution Products, Air Cooling Systems, Cooling Tower Accessories, Air Distribution Machine, Industrial Air Cooler, Air Handling Unit, Air Ventilator Machine, Axial Flow Fan etc. in different technical specifications. Offered Air Cooling Machine is mainly used in the offices, residences and commercial complexes for cooling the air. By providing exceptional quality goods, we are constantly meeting the diversified requirements of roofing industry, agriculture dairy, poultry farm industries, textile, garment, dyeing, engineering, food, hospitality industries, pharma and electronic industries. Under the guidance of our mentor, Mr. Ravinder Pal Sharma (Founder), we have been able to collaborate with the well known names of the market. The brands who are availing our goods includes Indo Chem, Ananda, Uflex, Klintoz, Intas Bio Pharmaceuticals, Phoenix Contact and many more.

Our Products and Delivery

Primary Business : Manufacturer

Delivery Locations : All Over India

Secondary Filter

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Filtration Grade	Hepa Filter
Medium Material	Paper, Synthetic Fiber, Microfiber
Rated Flow(m3/hr)	2000 CFM
Min Working Pressure	25 mm WC

Banking on the skills of our qualified team of professionals, we are engaged in offering superb quality assortment of Secondary Fine Filter.

Additional Information:

We offer a wide range Secondary Fine Filters which provides maximum filtration area and high shelf life. These filters are made as per G.D method and are easy to wash, clean and conforms to ASHRAE 52.2/EN779. Made from hi-quality non woven synthetic felt (Needle punched filter media) supported by HDPE wire mesh, these fine filters can hold 5 micron of dust present in the environment. In these Secondary Fine Filters, the filter media is stitched and pleated together to give utmost filtration area in the space provided & finally housed in a metal frame. Specially designed for high efficiency filtration, these fine filters is compulsorily used as – ‘Pre Filters’ to ‘HEPA Filters’.

Application:

Pharmaceuticals
Hospitals
Computer installations
Fertilizers plants
Central AC plants
Ventilation systems

All Metallic Wire Mesh Filter (Duplex Type)

Specifications:

Available in G.I., MS and MS powder coated frames
Available both in flang and box type frames in different sizes and depths as per system air flow

About Us

Established in the year 1995, Enviro Tech Industrial Products has carved a niche amongst the most trusted names in the market. The head quarter of our organization is situated at DELHI, Gandhi Nager. We are dedicatedly involved in manufacturing, importing and exporting a superior quality array of Pocket Filter, Filter Media and many more. These products are manufactured by utilizing optimum quality raw material. We are also involved in exporting 10-15% of our products to Bangladesh, Oman, Brazil, France and Japan. We also import 10-15% of our products from USA, China and Asian countries

Our Products and Delivery

Primary Business : Manufacturer

Delivery Locations : Deals In India As Well As Global

FILTER GRADE	FILTER SIZE IN MM	AIR FLOW CAPACITY	INITIAL PRESSURE DROP
Pre filter 90% efficiency @ 10 microns (G3)	610 x 610 x 48	1150 CFM	4 mm WC
Fine filter 95% efficiency @ 5 microns (F5)	610 x 610 x 150 610 x 610 x 300	1000 CFM 2000 CFM	7 mm WC 7 mm WC
Fine filter 95% efficiency @ 3 microns (F7)	610 x 610 x 150 610 x 610 x 300	1000 CFM 2000 CFM	12 mm WC 12 mm WC
Fine filter 95% efficiency @ 1 microns (F9)	610 x 610 x 150 610 x 610 x 300	1000 CFM 2000 CFM	15 mm WC 15 mm WC
Super fine filter 70% efficiency @ 0.3 microns (H10)	610 x 610 x 295	2000 CFM	15 mm WC
Hepa filter (Deep pleat) 99.99% efficiency @ 0.3 microns (H13)	610 x 610 x 145 610 x 610 x 295	625 CFM 1275 CFM	18 mm WC,br>18 mm WC
Hepa filter (Mini pleat) 99.99% efficiency @ 0.3 microns (H13)	610 x 610 x 70	625 CFM	18 mm WC
High flow Hepa filter (H13) 99.97% efficiency @ 0.3 microns	610 x 610 x 295 610 x 610 x 295	2000 CFM	25 mm WC

Microwave V Filter

Brand	Enviro Tech Industrial Products
Shape	Square, Rectangle
Usage/Application	Commercial
Filter Medium Material	Microfiber
Aluminum Frame	SS Frame
Thickness	5 mic

To keep the client satisfied, we manufacture, trade, export and supply high quality Microwave V Filter. the offered filters are designed to arrest finer particles up to 5 microns. it is normally used as a secondary filter after pre filters to have prolonged service life. this range is used in any air handling application. being a quality-oriented organization, we assure our clients that these products are the best in quality. our skilled professionals only utilize fine quality raw material, while manufacturing the entire range.

Features:

Easy to clean
Easy installation
Precisely design

Multi Layer Filter Media Folding

Usage/Application	Air Filter
GSM	250-300
Filtration Medium Material	Synthetic Fiber
GI Mesh	Aluminum Mesh
Thickness	10 & 20 Micron
Filtration Media	Filter Paper
Liquid to be Filtered	Distil Water

With the proficiency of this field, we are capable to present an extensive range of Multi Layer Filter Media Folding. In addition, we present these cabins in varied sizes and designs that meet on patron’s demand.

Biogas Filter

Minimum Order Quantity	12 Number
Filter Type	Bag Filter
Diameter	1-2 inch
Application	Industrial
Length	5-10 inch
Filter Medium Material	Activated Carbon
Operating Pressure	10 bar

Originating from biomass is gaining increasing worldwide importance as a recognized renewable energy source.

Box Frame Filter

Minimum Order Quantity	100 Number
Filter Type	Box Filter
Filtration Grade	Pre Filter
Brand	Enviro Tech Industrial Products
Filter Medium Material	EU 4
Material	Galvanized Iron
Initial Pressure	25 MM WC
Efficiency	95 %
Size	610 X 610 X 50 mm
Flow Rate	2000 CFM

Owing to our industrial experience, we have been able to manufacture and supply the best quality of Box Frame Filter. These filters are known for their rich features such as easy installation and leakage resistance finish. We have been able to meet the bulk demands of the offered filters, owing to our large production capacity.

Features:

Resistance against leakage
Thermal stability
Easy to install

Out Door Cabinet Filter

Usage/Application	Industrial
Filter Type	Cartridge Filter
Brand	Enviro Tech Industrial Products
Shape	Rectangle
Filter Medium Material	Metal, Fiberglass, Microfiber
Flow Rate (cubic meters/hr)	0-500, 500-1000, 1000-2000, 2000-3000

Our organization has successfully expanded its business in market owing to the offered elevated quality array of Out Door Cabinet Filter. The offered range is manufactured utilizing superior quality raw material and latest technology. Moreover, a team of our quality controllers conducts a series of quality tests on the entire range to seek out any possible defect. In tune with international standard, we provide this filter in various sizes and industry leading prices.

Features:

Compact size
Durability
Easy to install

Specification:
Efficiency :standard HDPE Foam type filters have an efficiency of 90% for 10 micron size particles. filters with an efficiency rating of 80 to 90% to capture 10 micron to size particles are also available on order.

Frame Type : Available in are Box type Aluminium Frame.
Frame Material : standard model is constructed in Aluminium Frame. are also available on order.
Filter Media :HDPE and non- Woven synthetic.
Net :Aluminium.
Standard Filter Sizes : -375 MM 225 MM

Fine Filter 10 MIcron

Filter Medium Material	Non Woven Synthetic Filter Media
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 305 mm
Application	Hospitals Pharmaceuticals
Flow Rate	0-500 m^3/hr
Efficiency	95%

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Flange Type Micro Fine Filter

Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Usage/Application	Laminar flow units, clean room application, hospitals pharmaceuticals
Filter Medium Material	Microfiber
Size	610x610x305 mm
Shape	Square

Enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of Micro Fine Filter Flange Type.

Fine Filter

Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven
Filtration Grade	Pre Filter
Filter Type	Box Filter, Panel Filter
Min Working Pressure	25 mm WC
Material of construction	Aluminum, Stainless Steel
Size	610 X 610 X 305 mm

Filters has achieved the status of a major indian air filters and clean room equipment manufacturer and regular clients include most of the leading pharmaceutical and electronic product manufacturers,as well as nuclear power, atomic energy and space research establishments. leading consultants, user industries and hvac turn-key engineering companies have approved our products and test facilities.enviro tech industrial products fine filters are used for high level pre filtration in air conditioning of paint booths, air handling units etc.

Fine Filters are available in the range of 1 to 5 micron:

low initial pressure drop.
light in weight and easy to handle.
high cost / performance ratio.
high dust holding capacity.
cleanable / washable.

Applications:

general filtration for air-conditioning and air handling units.
general air filtration and pre-filtration.
spray booths and pre-filtration.

Specifications:

type: flange or box
frame: galvanized steel, aluminum anodized,ss304
separators: aluminum
filter media: hdpe media / non woven synthetic media

All these filters are washable and hence reusable. normal sizes available are:

no	sizes in inchs	flow ( cfm )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24 x 12	2000

HEPA Filter Terminal Box

Filter Medium Material	Microfiber
Usage/Application	Home, Industry, Medical, Engineering
Flow Capacity Range	0-500 cfm
Diameter	>4″
Purifying Technology	Hepa
Air Volume	400 m3/h

We have uniquely positioned ourselves as a dependable firm, engaged in manufacturing, trading, exporting and supplying a commendable array of HEPA Filter Terminal Box. The offered terminal box is used as boxes for flange type HEPA filter. This product is manufactured using excellent quality raw material and latest technology by our skilled professionals. In order to ensure quality, this is stringently tested on various parameters by our experts. Apart from this, clients can avail the offered terminal box from us at market leading prices.

Features:

Highly efficient
Sturdiness
Anti corrosive body

Terminal filter boxes are normally used as boxes for flange type hepa filter made from s. W. G 16 gauge C. R. C. A sheets for overall construction with epoxy powder coated finish. Housing box for hepa filter is complete with:

Inside M. S. Angle frames duly powder coated
Hold fast (grounding arrangement/ceiling suspension angles)
Fixing and tightening bolts
Flexible canvas connection for two-side aluminum flange
Perforated aluminum sheets, duly powder coated and fixing screws.

Dry Type Microvee Filter

Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Usage/Application	Industrial
Filtration Grade	Pre Filter
Shape	Square
Size	610x610x305 mm

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Micro V Dry Air Filter

Minimum Order Quantity	12 Number
Brand	Enviro Tech Industrial Products
Rated Flow(m3/hr)	2000 CFM
Min Working Pressure	25 MM WC
Filtration Grade	Hepa Filter, Pre Filter, Ulpa Filter, Medium Filter
Medium Material	Microfiber, Synthetic Fiber
Construction	Cartridge Filter, Panel Filter, Box Filter, Bag Filter, Wire Mesh

Among these we offer Micro-V Dry Air Filter These have been specially designed to meet the requirement of clean air in general ventilation and air conditioning system in Hospitals, Synthetic fiber industries and compressor applications.

Construction: The heart of the filters is a reinforced washable synthetic non-woven filter media/fire retardant glass fiber media pleated in a format along with the support of wire/HDPE netting. The mediums are carefully selected to offer the best possible performance to suit the specific need. In order to obtain uniformity of dust loading the filter pleats are kept apart by means of aluminium separators.

Media: The media is a special synthetic non-woven bounded fiber designed to give high efficiency and long service life. It is pressed in the form of a fabric and given special treatment which prevents fungus growth. An alternative media in superior felt is also available, which gives long run trouble free services, and economical in usage.

Features:

Efficiency : 99.9% down to 5 microns
Pressure drop : 6.5 mm of wg. At rated flow
Frame : Galvanized steel sheet/MS/ Aluminium/ stainless steels sheet
Finish : Painted/ powder coated
Filter media : Synthetic Non-woven filter media supported with HDPE mesh and Gl/aluminium Expanded mesh
Media : Pleated
Sealant : Available
Type : Box type / Flange type

Specifications of Standard Models:

Model No.	Nominal Dimension Millimeters Inches		Rated Capacity @ 6.5 WG M³ / Hr CFM		App. Wt. (Kg.)
DP – 6001	254x254x85	10x10x3.25	170	100	5
DP – 6002	508x254x85	20x10x3.25	330	195	8
DP – 6003	508x254x152	20x10x6	560	330	10
DP – 6004	508x381x152	20x15x6	890	525	15
DP – 6005	508x381x152	20x20x6	1220	710	18
DP – 6006	610x610x150	24x24x6	1670	1050	25
DP – 6007	610x610x305	24x24x12	3000	1800	50

Micro V Filter

Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Filtration Grade	Hepa Filter,Pre Filter,Ulpa Filter
Min Working Pressure	25 mm WC
Frame Type	Box Type / Flange Type .
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 305 mm
Material	GI Sheet / Aluminium Sheet
Medium Material	Microfiber,Synthetic Fiber
Rated Flow(m3/hr)	2000 CFM

Micro V Filter are designed /constructed with firm aluminum frame/ G.I Frame and having separators in each pleat side. Filters are having the oval hole on flange on four sides for bolting adjustments on side installation.

Box Type Fine Filter

Usage/Application	Clean Room Application
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Thickness	305 mm
Material of construction	GI sheet
Efficiency	95%
Diameter	610 X 610 X 305 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type.

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Fine Filter Flange Type

Usage/Application	Hospitals Pharmaceuticals
Brand	Enviro Tech Industrial Products
Filtration Grade	Pre Filter
Flow Rate	2000 CFM
Material of construction	Aluminum
Efficiency	95%

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Flange Type.

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

GI Frame Fine Filter

Usage/Application	Laminar Flow Units
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Efficiency	95%
Initial Pressure	25 mm WC

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Fine Filter Aluminum Frame

Minimum Order Quantity	12 Number
Usage/Application	Clean Room Application
Material	Aluminum
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Box Filter
Material of construction	Aluminum
Efficiency	95%
Is It Washable	Washable
Room Size Feet X Feet X Feet	610 MM X 610 MM X 305 MM
I Deal In	New Only

Fine Filter Aluminum Frame

Enriched By Our Vast Industrial Experience In This Business, We Are Involved In Offering An Enormous Quality Range Of Micro Fine Filter Box Type / Flange Type .
Specifications:
Micron – 3,5,10
Material Used: GI Sheet / Aluminium Sheet
Flow: Standard Flow
Size: 610 MM X 610 MM X 305 MM
Applications:

Laminar Flow UnitsClean Room ApplicationHospitals Pharmaceuticals
Application : IndustrialMaterial : MetalDurability : Long LifeResistivity : Rust ResistantDrive Type : ElectricSurface Finishing : Polished

Additional Information:

Item Code: Fine-Filter-Aluminum-Frame
Production Capacity: www.envirotechdelhi.net
Delivery Time: www.envirotechdelhi.co.in
Packaging Details: www.envirotechindia.info

Fine Filter 5 Micron

Usage/Application	Ahu
Micron ratings	5 mic
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Panel Filter
Efficiency	95%

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Fine Filter 3 Micron

Usage/Application	Laminar Flow Units
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Flow Rate	2000 cfm
Shape	Rectangle
Efficiency	95 %

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Super Fine Filters

Frame	Al. Andoized/ GL/ SS 304
Gasket	Sponge/ Foam/ Felt
Initial Pressure Drop	12 mm
Face Guard	Aluminium/ GI/SS-Expanded/ None
Separators	Aluminium /GI/SS

We are offering Super Fine Filters to our client.

Specifications:

frame : aluminum, s.s,gi, box type / flange type
adhesive: epoxy based adhesive for leak proof joint between filter media and casing.
gasket: felt / natural rubber / pe foam gaskets as per customer choice for sealing the filters on mounting frames.
temperature & humidity : recommended for operating temperature : up to 75°c. operating humidity up to 100% rh, high temp. against order.
cleaning : washable by detergent / water solution or by air! vacuum cleaner as per design.
product range : filters are available with air handling capacity in the range of 170 cubic meter! hr (100 cfm) to 3400 cubic meter / hr. (2000 cfm) : filter -grade from g3 to f9 (20 micron to 1 micron) plated hdpe mesh or special grade felt are used in pre-filters, which have filtration capacity for 10 micron and larger size particles. non-woven filter fabric is used in fine or microwave filters which have filtration capacity for 5 micron and larger particles, in both washable as well as non-washable type.

Microvee Type Fine Filter

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Frame Type	Al. Andoized/ GL/ SS 304
Sealing Type	Expoxy/Foam
Size	610x610x305 mm
Initial Pressure Drop	12 mm of WC
Recommended Final Pressure Drop	25 mm OF WC

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Panel Microvee Filter

Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Usage/Application	Industries Like Chemical Process, Food Processing, Electronics
Size	610x610x305 mm
Thickness	10 mic
Shape	Rectangle

In order to keep pace with never ending demands of clients, our company offers Panel Microvee Filter.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Digital Differential Pressure Gauge A1 - Sensocon, Uncategorized

Digital Differential Pressure Gauge A1 – Sensocon

Oct 29, 2021 by admin 0 Comments

Digital Differential Pressure Gauge Series A1

Digital Differential Pressure Gauge Series A1

The Series A1 Digital Differential Pressure Gauge is a patented microprocessor based digital pressure gage for positive, negative,and differential measurement designed to be a direct replacement for mechanical gauges.The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%.For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy.The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal.The A1 features a bright ½” LED display,which gives the gauge improved readability and precision.The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in.w.c., mm w.c.,cm w.c.,kPa, and Pa.The Series A1 offers an improved look,and performance compared to mechanical gauges.

SPECIFICATION

Maximum Pressure:Ranges -00 to -07 = 2 PSI (13.8kPa)
Ranges -08 to -12 = 10 PSI (68.9pKa)
Media Compatibility:Air and Compatible Non-Combustible, Non-Corrosive Gases
Accuracy:1.0%, 0.5%,or 0.25%Temperature Ranges:Compensated and Operating:-10° to 140°F (-23° to 60°C) Thermal Effect:+/- 0.02% FS/°F Output Signal:4-20 mA (option) Loop Resistance:750 Ω Max (for internally sourced power);1800 Ω Max (for externally sourced power of 36 VDC) Power Supply:Universal 24-240 VAC or VDC Housing Material:Glass Filled Nylon Enclosure Rating:Designed to meet NEMA 4X (IP 65) face;with optional
cover the entire product is weatherproof Electrical Connections:screw terminals Response Time:<100 ms Display:4 Digit,Red LED,½” (12.7mm) digits Process Connection:Push on connection for 3/16″ (5MM) Tubing Agency Approvals:CE

Custom calibration including improved accuracy and thermal effect are available.

Sensocon Digital Differential Pressure Gauge Modal A1000-00

Brand	Sensocon USA
Measuring Range	+-0.25″ WC\|\|+-60 Pa
Model Name/Number	A1000-00
Usage/Application	Industrial
Connection	3/16″ NPT
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-00
Color	Black
Scale Range	+-0.25″ WC\|\|+-60 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Warranty	1 YERS
Series	A1
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-00

Digital Differential Pressure Gauge, ±1.00%, ±0.25″ WC, 60 Pa
Manufacturer:Sensocon USA
MPN:A1000-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±0.25″ WC, 60 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±0.25″ WC||±60 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±0.25″ WC, ±60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:PNL MOUNT DISPLAY, 1%, 0.25IN (60 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-01

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-0.50″ WC\|\|+-125 Pa
Model Name/Number	A1000-01
Usage/Application	Industrial
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-01
Color	Black
Scale Range	+-0.50″ WC\|\|+-125 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-01

Digital Differential Pressure Gauge, ±1.00%, ±0.50″ WC, ±125 Pa
Manufacturer:Sensocon USA
MPN:A1000-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±0.50″ WC, 125 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±0.50″ WC||±125 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:PNL MOUNT DISPLAY, 1%, 0.50IN (125 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-10

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-20.00″ WC\|\|+-5000 Pa
Model Name/Number	A1000-10
Usage/Application	Industrial
Connection	New
Display Type	Yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-10
Color	Black
Scale Range	+-20.00″ WC\|\|+-5000 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-10

Digital Differential Pressure Gauge, ±1.00%, ±20.00″ WC, ±5 kPa
Manufacturer:Sensocon USA
MPN:A1000-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±20.00″ WC, ±5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±20.00″ WC||±5000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-11

Minimum Order Quantity	1 Piece
Dial Size	5.00″
Accuracy	+-1.00%
Measuring Range	+-30.00″ WC\|\|+-7500 Pa
Usage/Application	Industrial
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-11
Display Type	YAS
Brand	Sensocon USA
Model Name/Number	A1000-11
Warranty	1 YERS
Mounting	Center Back Mount
Signal Output	Optional 4-20 mA output
Power	24-240 VAC/VDC
Design	Digital
Color	Black
Thread Connection	3/16″ NPT
I Deal In	New Only
Packaging Type	1 NOS
Diameter	5.00″
Scale Range	+-30.00″ WC\|\|+-7500 Pa
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-11

Digital Differential Pressure Gauge, ±1.00%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1000-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±30.00″ WC, ±7.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±30.00″ WC||±7500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-12

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-40.00″ WC\|\|+-10000 Pa
Model Name/Number	A1000-12
Usage/Application	Industrial
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-12
Color	Black
Scale Range	+-40.00″ WC\|\|+-10000 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-12

Digital Differential Pressure Gauge, ±1.00%, ±40.00″ WC, ±10 kPa
Manufacturer:Sensocon USA
MPN:A1000-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±40.00″ WC, ±10 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±40.00″ WC||±10000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-13

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-50.00″ WC\|\|+-12500 Pa
Model Name/Number	A1000-13
Usage/Application	Industrial
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-13
Color	Black
Scale Range	+-50.00″ WC\|\|+-12500 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-13

Digital Differential Pressure Gauge, ±1.00%, ±50.00″ WC, ±12.5 kPa
Manufacturer:Sensocon USA
MPN:A1000-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±50.00″ WC, ±12.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±50.00″ WC||±12500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-02

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-1.00″ WC\|\|+-250 Pa
Model Name/Number	A1000-02
Usage/Application	Industrial
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-02
Color	Black
Scale Range	+-1.00″ WC\|\|+-250 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-02

Digital Differential Pressure Gauge, ±1.00%, ±1.00″ WC, ±250 Pa
Manufacturer:Sensocon USA
MPN:A1000-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±1.00″ WC, ±250 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±1.00″ WC||±250 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-03

Brand	Sensocon USA
Measuring Range	+-2.00″ WC\|\|+-500 Pa
Model Name/Number	A1000-03
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-03
Color	Black
Scale Range	+-2.00″ WC\|\|+-500 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-03

Digital Differential Pressure Gauge, ±1.00%, ±2.00″ WC, ±500 Pa
Manufacturer:Sensocon USA
MPN:A1000-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±2.00″ WC, ±500 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±2.00″ WC||±500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 2.0IN (500 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-04

Dial Size	5.00″
Connection	New
Accuracy	+-1.00%
Measuring Range	+-3.00″ WC\|\|+-750 Pa
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-04
Usage/Application	Industrial
Display Type	Yas
Brand	Sensocon USA
Model Name/Number	A1000-04
Mounting	Center Back Mount
Signal Output	Optional 4-20 mA output
Power	24-240 VAC/VDC
Design	Digital
Color	Black
Thread Connection	3/16″ NPT
I Deal In	New Only
Packaging Type	1 NOS
Series	A1
Diameter	5.00″
Scale Range	+-3.00″ WC\|\|+-750 Pa
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-04

Digital Differential Pressure Gauge, ±1.00%, ±3.00″ WC, ±750 Pa
Manufacturer:Sensocon USA
MPN:A1000-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±3.00″ WC, ±750 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±3.00″ WC||±750 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 3.0IN (750 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-05

Brand	Sensocon USA
Measuring Range	+-4.00″ WC\|\|+-1000 Pa
Model Name/Number	A1000-05
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-05
Color	Black
Scale Range	+-4.00″ WC\|\|+-1000 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-05

Digital Differential Pressure Gauge, ±1.00%, ±4.00″ WC, ±1 kPa
Manufacturer:Sensocon USA
MPN:A1000-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±4.00″ WC, ±1 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±4.00″ WC||±1000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 4.0IN (1.0 K PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-06

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-5.00″ WC\|\|+-1250 Pa
Model Name/Number	A1000-06
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-06
Color	Black
Scale Range	+-5.00″ WC\|\|+-1250 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	yas
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-06

Digital Differential Pressure Gauge, ±1.00%, ±5.00″ WC, ±1.25 kPa
Manufacturer:Sensocon USA
MPN:A1000-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±5.00″ WC, ±1.25 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±5.00″ WC||±1250 Pa,
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 5.0IN (1.25 KPA)
Manufacturer:Sensocon USA

Additional Information:

Item Code: A1000-06
Production Capacity: www.envirotechindustrialproducts.co.in
Delivery Time: www.envirotechindustrialproduct.co.in
Packaging Details: www.envirotechindustrialproduct.in

Sensocon Digital Differential Pressure Gauge Modal A1000-08

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-10.00″ WC\|\|+-2500 Pa
Model Name/Number	A1000-08
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-08
Color	Black
Scale Range	+-10.00″ WC\|\|+-2500 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-08

Digital Differential Pressure Gauge, ±1.00%, ±10.00″ WC, ±2.5 kPa
Manufacturer:Sensocon USA
MPN:A1000-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±10.00″ WC, ±2.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±10.00″ WC||±2500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-07

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-8.00″ WC\|\|+-2000 Pa
Model Name/Number	A1000-07
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-07
Color	Black
Scale Range	+-8.00″ WC\|\|+-2000 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-07

Digital Differential Pressure Gauge, ±1.00%, ±8.00″ WC, ±2.0 kPa
Manufacturer:Sensocon USA
MPN:A1000-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±8.00″ WC, ±2.0 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±8.00″ WC||±2000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 8.0IN (2.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-02

Brand	Sensocon USA
Measuring Range	+-1.00″ WC\|\|+-250 Pa
Model Name/Number	A1001-02
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-02
Color	Black
Scale Range	+-1.00″ WC\|\|+-250 Pa
Accuracy	+-0.50%
Diameter	5.00″
Weight	Digital
Power	24-240 VAC/VDC
Dial Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-02

Digital Differential Pressure Gauge, ±0.50%, ±1.00″ WC, ±250 Pa
Manufacturer:Sensocon USA
MPN:A1001-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±1.00″ WC, ±250 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±1.00″ WC||±250 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1001-01

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-0.50″ WC\|\|+-125 Pa
Model Name/Number	A1001-01
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-01
Color	Black
Scale Range	+-0.50″ WC\|\|+-125 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-01

Digital Differential Pressure Gauge, ±0.50%, ±0.50″ WC, ±125 Pa
Manufacturer:Sensocon USA
MPN:A1001-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±0.50″ WC, ±125 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.50″ WC||±125 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-09

Brand	Sensocon USA
Measuring Range	+-15.00″ WC\|\|+-3750 Pa
Model Name/Number	A1000-09
Usage/Application	Industrial
Material	Aluminium
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-09
Color	Black
Scale Range	+-15.00″ WC\|\|+-3750 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-09

Digital Differential Pressure Gauge, ±1.00%, ±15.00″ WC, ±3.75 kPa
Manufacturer:Sensocon USA
MPN:A1000-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±15.00″ WC, ±3.75 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±15.00″ WC||±3750 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 15.0IN (3.75 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-10

Brand	Sensocon USA
Measuring Range	+-20.00″ WC\|\|+-5000 Pa
Model Name/Number	A1001-10
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-10
Color	Black
Scale Range	+-20.00″ WC\|\|+-5000 Pa
Accuracy	+-0.50%
Design	DIGITAL
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-10

Digital Differential Pressure Gauge, ±0.50%, ±20.00″ WC, ±5 kPa
Manufacturer:Sensocon USA
MPN:A1001-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±20.00″ WC, ±5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±20.00″ WC||±5000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 20.0IN (5.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-11

Brand	Sensocon USA
Measuring Range	+-30.00″ WC\|\|+-7500 Pa
Model Name/Number	A1001-11
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-11
Color	Black
Scale Range	+-30.00″ WC\|\|+-7500 Pa
Accuracy	+-0.50%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-11

Digital Differential Pressure Gauge, ±0.50%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1001-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±30.00″ WC, ±7.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±30.00″ WC||±7500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 30.0IN (7.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-12

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-40.00″ WC\|\|+-10000 Pa
Model Name/Number	A1001-12
Usage/Application	Industrial
Material	Aluminium
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-12
Color	Black
Scale Range	+-40.00″ WC\|\|+-10000 Pa
Accuracy	+-0.50%
Design	Digital
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-12

Digital Differential Pressure Gauge, ±0.50%, ±40.00″ WC, ±10 kPa
Manufacturer:Sensocon USA
MPN:A1001-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±40.00″ WC, ±10 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±40.00″ WC||±10000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 40.0IN (10 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-13

Brand	Sensocon USA
Measuring Range	+-50.00″ WC\|\|+-12500 Pa
Model Name/Number	A1001-13
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-13
Color	Black
Scale Range	+-50.00″ WC\|\|+-12500 Pa
Accuracy	+-0.50%
Power	24-240 VAC/VDC
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-13

Digital Differential Pressure Gauge, ±0.50%, ±50.00″ WC, ±12.5 kPa
Manufacturer:Sensocon USA
MPN:A1001-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±50.00″ WC, ±12.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±50.00″ WC||±12500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%,50.0IN (12.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-03

Brand	Sensocon USA
Measuring Range	+-2.00″ WC\|\|+-500 Pa
Model Name/Number	A1001-03
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-03
Color	Black
Scale Range	+-2.00″ WC\|\|+-500 Pa
Accuracy	+-0.50%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-03

Digital Differential Pressure Gauge, ±0.50%, ±2.00″ WC, ±500 Pa
Manufacturer:Sensocon USA
MPN:A1001-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±2.00″ WC, ±500 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±2.00″ WC||±500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 2.0IN (500 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-04

Brand	Sensocon USA
Measuring Range	+-3.00″ WC\|\|+-750 Pa
Model Name/Number	A1001-04
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-04
Color	Black
Scale Range	+-3.00″ WC\|\|+-750 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-04

Digital Differential Pressure Gauge, ±0.50%, ±3.00″ WC, ±750 Pa
Manufacturer:Sensocon USA
MPN:A1001-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±3.00″ WC, ±750 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±3.00″ WC||±750 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 3.0IN (750 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-05

Brand	Sensocon USA
Measuring Range	+-4.00″ WC\|\|+-1000 Pa
Model Name/Number	A1001-05
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Yas
Type	Digital
Color	Black
Scale Range	+-4.00″ WC\|\|+-1000 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-05

Digital Differential Pressure Gauge, ±0.50%, ±4.00″ WC, ±1 kPa
Manufacturer:Sensocon USA
MPN:A1001-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±4.00″ WC, ±1 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±4.00″ WC||±1000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 4.0IN (1.0 K PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-06

Brand	Sensocon USA
Measuring Range	+-5.00″ WC\|\|+-1250 Pa
Model Name/Number	A1001-06
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-06
Color	Black
Scale Range	+-5.00″ WC\|\|+-1250 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-06

Digital Differential Pressure Gauge, ±0.50%, ±5.00″ WC, ±1.25 kPa
Manufacturer:Sensocon USA
MPN:A1001-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±5.00″ WC, ±1.25 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±5.00″ WC||±1250 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 5.0IN (1.25 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-07

Brand	Sensocon USA
Measuring Range	+-8.00″ WC\|\|+-2000 Pa
Model Name/Number	A1001-07
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-07
Color	Black
Scale Range	+-8.00″ WC\|\|+-2000 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-07

Digital Differential Pressure Gauge, ±0.50%, ±8.00″ WC, ±2.0 kPa
Manufacturer:Sensocon USA
MPN:A1001-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±8.00″ WC, ±2.0 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±8.00″ WC||±2000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 8.0IN (2.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-08

Brand	Sensocon USA
Measuring Range	+-10.00″ WC\|\|+-2500 Pa
Model Name/Number	A1001-08
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-08
Color	Black
Scale Range	+-10.00″ WC\|\|+-2500 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	Yas
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-08

Digital Differential Pressure Gauge, ±0.50%, ±10.00″ WC, ±2.5 kPa
Manufacturer:Sensocon USA
MPN:A1001-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±10.00″ WC, ±2.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±10.00″ WC||±2500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 10.0IN (2.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-09

Brand	Sensocon USA
Measuring Range	+-15.00″ WC\|\|+-3750 Pa
Model Name/Number	A1001-09
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-09
Color	Black
Scale Range	+-15.00″ WC\|\|+-3750 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-09

Digital Differential Pressure Gauge, ±0.50%, ±15.00″ WC, ±3.75 kPa
Manufacturer:Sensocon USA
MPN:A1001-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±15.00″ WC, ±3.75 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±15.00″ WC||±3750 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.50%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 15.0IN (3.75 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-00

Brand	Sensocon USA
Measuring Range	+-0.25″ WC\|\|60 Pa
Model Name/Number	A1002-00
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-00
Color	Black
Scale Range	+-0.25″ WC\|\|60 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-00

Digital Differential Pressure Gauge, ±0.25%, ±0.25″ WC, 60 Pa
Manufacturer:Sensocon USA
MPN:A1002-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±0.25″ WC, 60 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.25″ WC||60 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±0.25″ WC, 60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 0.25IN (60 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-01

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-0.50″ WC\|\|+-125 Pa
Model Name/Number	A1002-01
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-01
Color	Black
Scale Range	+-0.50″ WC\|\|+-125 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	Yas
Warranty	Yas
Series	A1
Packaging Type	1 Nos
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-01

Digital Differential Pressure Gauge, ±0.25%, ±0.50″ WC, ±125 Pa
Manufacturer:Sensocon USA
MPN:A1002-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±0.50″ WC, ±125 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.50″ WC||±125 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 0.50IN (125 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-10

Brand	Sensocon USA
Measuring Range	+-20.00″ WC\|\|+-5000 Pa
Model Name/Number	A1002-10
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-10
Color	Black
Scale Range	+-20.00″ WC\|\|+-5000 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-10

Digital Differential Pressure Gauge, ±0.25%, ±20.00″ WC, ±5 kPa
Manufacturer:Sensocon USA
MPN:A1002-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±20.00″ WC, ±5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±20.00″ WC||±5000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 20.0IN (5.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-11

Brand	Sensocon USA
Measuring Range	+-30.00″ WC\|\|+-7500 Pa
Model Name/Number	A1002-11
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-11
Color	Black
Scale Range	+-30.00″ WC\|\|+-7500 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-11

Digital Differential Pressure Gauge, ±0.25%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1002-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±30.00″ WC, ±7.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±30.00″ WC||±7500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 30.0IN (7.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-12

Brand	Sensocon USA
Measuring Range	+-40.00″ WC\|\|+-10000 Pa
Model Name/Number	A1002-12
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-12
Color	Black
Scale Range	+-40.00″ WC\|\|+-10000 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-12

Digital Differential Pressure Gauge, ±0.25%, ±40.00″ WC, ±10 kPa
Manufacturer:Sensocon USA
MPN:A1002-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±40.00″ WC, ±10 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±40.00″ WC||±10000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUN
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 40.0IN (10 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-13

Brand	Sensocon USA
Measuring Range	+-50.00″ WC\|\|+-12500 Pa
Model Name/Number	A1002-13
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-13
Color	Black
Scale Range	+-50.00″ WC\|\|+-12500 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-13

Digital Differential Pressure Gauge, ±0.25%, ±50.00″ WC, ±12.5 kPa
Manufacturer:Sensocon USA
MPN:A1002-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±50.00″ WC, ±12.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±50.00″ WC||±12500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 50.0IN (12.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-02

Brand	Sensocon USA
Measuring Range	+-1.00″ WC\|\|+-250 Pa
Model Name/Number	A1002-02
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-02
Color	Black
Scale Range	+-1.00″ WC\|\|+-250 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-02

Digital Differential Pressure Gauge, ±0.25%, ±1.00″ WC, ±250 Pa
Manufacturer:Sensocon USA
MPN:A1002-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±1.00″ WC, ±250 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±1.00″ WC||±250 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 1.0IN (250 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-03

Brand	Sensocon USA
Measuring Range	+-2.00″ WC\|\|+-500 Pa
Model Name/Number	A1002-03
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-03
Color	Black
Scale Range	+-2.00″ WC\|\|+-500 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-03

Digital Differential Pressure Gauge, ±0.25%, ±2.00″ WC, ±500 Pa
Manufacturer:Sensocon USA
MPN:A1002-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±2.00″ WC, ±500 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±2.00″ WC||±500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 2.0IN (500 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-04

Brand	Sensocon USA
Measuring Range	+-3.00″ WC\|\|+-750 Pa
Model Name/Number	A1002-04
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-04
Color	Black
Scale Range	+-3.00″ WC\|\|+-750 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-04

Digital Differential Pressure Gauge, ±0.25%, ±3.00″ WC, ±750 Pa
Manufacturer:Sensocon USA
MPN:A1002-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±3.00″ WC, ±750 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±3.00″ WC||±750 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 3.0IN (750 PA)
Manufacturer:Sensocon USA

Additional Information:

Item Code: A1002-04
Production Capacity: www.envirotechindustrialproducts.in
Delivery Time: www.envirotechindustrialproduct.com
Packaging Details: www.envirotechindustrialproducts.com

Sensocon Digital Differential Pressure Gauge Modal A1002-05

Brand	Sensocon USA
Measuring Range	+-4.00″ WC\|\|+-1000 Pa
Model Name/Number	A1002-05
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-05
Color	Black
Scale Range	+-4.00″ WC\|\|+-1000 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-05

Digital Differential Pressure Gauge, ±0.25%, ±4.00″ WC, ±1 kPa
Manufacturer:Sensocon USA
MPN:A1002-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±4.00″ WC, ±1 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±4.00″ WC||±1000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 4.0IN (1.0 K PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-06

Brand	Sensocon USA
Measuring Range	+-5.00″ WC\|\|+-1250 Pa
Model Name/Number	A1002-06
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-06
Color	Black
Scale Range	+-5.00″ WC\|\|+-1250 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	Yas
Warranty	Yas
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-06

Digital Differential Pressure Gauge, ±0.25%, ±5.00″ WC, ±1.25 kPa
Manufacturer:Sensocon USA
MPN:A1002-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±5.00″ WC, ±1.25 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±5.00″ WC||±1250 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: MOUNT DISPLAY, 0.25%, 5.0IN (1.25 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-07

Brand	Sensocon USA
Measuring Range	+-8.00″ WC\|\|+-2000 Pa
Model Name/Number	A1002-07
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-07
Color	Black
Scale Range	+-8.00″ WC\|\|+-2000 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-07

Digital Differential Pressure Gauge, ±0.25%, ±8.00″ WC, ±2.0 kPa
Manufacturer:Sensocon USA
MPN:A1002-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±8.00″ WC, ±2.0 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±8.00″ WC||±2000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 8.0IN (2.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-08

Brand	Sensocon USA
Measuring Range	+-10.00″ WC\|\|+-2500 Pa
Model Name/Number	A1002-08
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-08
Color	Black
Scale Range	+-10.00″ WC\|\|+-2500 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-08

Digital Differential Pressure Gauge, ±0.25%, ±10.00″ WC, ±2.5 kPa
Manufacturer:Sensocon USA
MPN:A1002-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±10.00″ WC, ±2.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±10.00″ WC||±2500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 10.0IN (2.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-09

Brand	Sensocon USA
Measuring Range	+-15.00″ WC\|\|+-3750 Pa
Model Name/Number	A1002-09
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-09
Color	Black
Scale Range	+-15.00″ WC\|\|+-3750 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-09

Digital Differential Pressure Gauge, ±0.25%, ±15.00″ WC, ±3.75 kPa
Manufacturer:Sensocon USA
MPN:A1002-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±15.00″ WC, ±3.75 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±15.00″ WC||±3750 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 15.0IN (3.75 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-00

Minimum Order Quantity	1 Number
Brand	Sensocon USA
Measuring Range	+-0.25″ WC\|\|60 Pa
Model Name/Number	A1010-00
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1010-00
Color	Black
Scale Range	+-0.25″ WC\|\|60 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1010-00

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±0.25″ WC, 60 Pa
Manufacturer:Sensocon USA
MPN:A1010-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±0.25″ WC, 60 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.25″ WC||60 Pa
Short Description: DIAL GAUGE, DIGITAL, ±1.00%, ±0.25″ WC, 60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 0.25IN (60 PA), 4-20 MA
Manufacturer:Sensocon USA

Aerosense Series ASG Differential Pressure Gauge Wholesaler, Uncategorized

Aerosense Series ASG Differential Pressure Gauge Wholesaler

Oct 29, 2021 by admin 0 Comments

Aerosense Model ASGC-02 INCH Differential Pressure Gauge Range 1-0-1 Inch

Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-04 INCH Differential Pressure Gauge Range 2-0-2 Inch

Model Number	ASGC-04
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10 INCH Differential Pressure Gauge Range 5-0-5 INCH

Brand	Aerosense
Model Name/Number	ASGC-10 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20 INCH Differential Pressure Gauge Range 10-0-10 Inch

Brand	Aerosense
Model Name/Number	ASGC-20 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30 INCH Differential Pressure Gauge Range 15-0-15 Inch

Brand	Aerosense
Model Name/Number	ASGC-30 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-15CM Differential Pressure Gauge Range 0-15 CM of Water

Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-20CM Differential Pressure Gauge Range 0-20 CM of Water

Model Number	ASG-20CM
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Brand	Aerosense
Measuring Range	0-25 CM of Water
Model Name/Number	ASG-25CM
Usage/Application	Industrial
Material	Mild Steel
Connection	New
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-50CM Differential Pressure Gauge Range 0-50 CM of Water

Brand	Aerosense
Model Name/Number	ASG-50CM
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-80CM Differential Pressure Gauge Range 0-80 CM of Water

Brand	Aerosense
Model Name/Number	ASG-80CM
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100CM Differential Pressure Gauge Range 0-100 CM of Water

Brand	Aerosense
Model Name/Number	ASG-100CM
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-150CM Differential Pressure Gauge Range 0-150 CM of Water

Brand	Aerosense
Model Name/Number	ASG-150CM
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-200CM Differential Pressure Gauge Range 0-200 CM of Water

Model Number	ASG-200CM
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250CM Differential Pressure Gauge Range 0-250 CM of Water

Model Number	ASG-250CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-300CM Differential Pressure Gauge Range 0-300 CM of Water

Model Number	ASG-300CM
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-6MM Differential Pressure Gauge Range 3 -0-3 mm

Model Number	ASGC-6MM
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10MM Differential Pressure Gauge Range 5 -0-5 mm

Model Number	ASGC-10MM
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20MM Differential Pressure Gauge Range 10 -0-10 mm

Model Number	ASGC-20MM
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Brand	Aerosense
Measuring Range	0.125-0-0.125 Inch
Model Name/Number	ASGC-00 inch
Usage/Application	Industrial
Material	Mild Steel
Connection	New
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differe

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60”C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-01 INCH Differential Pressure Gauge Range 0.5-0-0.5 INCH

Brand	Aerosense
Model Name/Number	ASGC-01inch
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-0 INCH Differential Pressure Gauge Range 0.25-0-0.25 Inch

Brand	Aerosense
Model Name/Number	ASGC-0 inch
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1KPA Differential Pressure Gauge Range .5-0-.5 KPA

Model Number	ASGC-1KPA
Usage/Application	Filter monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2KPA Differential Pressure Gauge Range 1-0-1 KPA

Model Number	ASGC-2KPA
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2.5KPA Differential Pressure Gauge Range 1.25-0-1.25 KPA

Model Number	ASGC-2.5KPA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-3KPA Differential Pressure Gauge Range 1.5-0-1.5 KPA

Model Number	ASGC-3KPA
Usage/Application	Filter monitoring
Brand	Aerosense
Weight	510 g
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-4CM Differential Pressure Gauge Range 2-0-2 CM

Model Number	ASGC-4CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10CM Differential Pressure Gauge Range 5-0-5 CM

Model Number	ASGC-10CM
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30CM Differential Pressure Gauge Range 15-0-15 CM

Model Number	ASGC-30CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60NPA Differential Pressure Gauge Range 10-0-50 PA

Model Number	ASG-60NPA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60PA Differential Pressure Gauge Range 0-60 PA

Model Number	ASG-60PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100PA Differential Pressure Gauge Range 0-100 PA

Model Number	ASG-100PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-125PA Differential Pressure Gauge Range 0-125 PA

Model Number	ASG-125PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250PA Differential Pressure Gauge Range 0-250 PA

Model Number	ASG-250PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-500PA Differential Pressure Gauge Range 0-500 PA

Model Number	ASG-500PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-750PA Differential Pressure Gauge Range 0-750 PA

Model Number	Series ASG
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2%
Temperature	20 to 140 degF
Size	4″
Housing Material	Die cast aluminium
Pressure Limits	20 in hg
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-1000PA Differential Pressure Gauge Range 0-1000 PA

Model Number	ASG-1000PA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-60PA Differential Pressure Gauge Range 30-0-30 PA

Model Number	ASGC-60PA
Usage/Application	Fan Pressure Indication
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Brand	Aerosense
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-100PA Differential Pressure Gauge Range 50-0-50 PA

Model Number	ASGC-100PA
Usage/Application	Fan Pressure Indication
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Brand	Aerosense
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-200PA Differential Pressure Gauge Range 100-0-100 PA

Model Number	ASGC-200PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-120PA Differential Pressure Gauge Range 60-0-60 PA

Model Number	ASGC-120PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-250PA Differential Pressure Gauge Range 125-0-125 PA

Model Number	ASGC-250PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-300PA Differential Pressure Gauge Range 150-0-150 PA

Model Number	ASGC-300PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Temperature Limits	20 to 140degF
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Process Connections	1/8″

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-500PA Differential Pressure Gauge Range 250-0-250 PA

Model Number	ASGC-500PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1000PA Differential Pressure Gauge Range 500-0-500 PA

Model Number	ASGC-1000PA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Uncategorized

The bond Between Religion and Integrity in the Framework of Travel around

Oct 22, 2021 by admin 0 Comments

If you’d like to generate dishes which might be full of umami, try adding kapi for the recipe. It is a versatile sauce and is found in Cookware grocers or perhaps online. The definition of kapi comes from the Indonesian word for’shrimp’ and refers to a tiny, salty shrimp. It is also used in making shrimp insert. For maximum flavor, try mixing a spoonful with a teaspoon of crude oil before providing.

Most religions ally high ethical expectations. However , these standards are certainly not exclusive to the religion. Atheists may also stick to high ethical standards. Nevertheless a religion provides intense determination, it is not the same as ethics. Atheists, however , do not have to end up being religious to practice ethical key points. It is not necessary to have a religious belief to live by simply ethical rules. In fact , an individual may have a solid ethical groundwork devoid of following virtually any religion.

In order to travel around safely, it is vital to obtain the full course of vaccines. You can obtain a valid vaccine complete within 3 weeks of entering the http://gebangarum.desa.id/2019/11/10/methods-to-marry-a-ukrainian-woman/ nation. Upon birth, you can also importance a QR code intended for mRNA vaccination. Should you have already considered a test out in the previous 1 day, you can also import your vaccination from the US. You can take making a stop in your destination while being safe and sound. Of course, if you’re in an unsafe spot, be sure to check out a doctor if you’re certainly not feeling very well.

Although most beliefs counsel high honest standards, this doesn’t show that they’re based upon any particular belief system. Rather, https://getdate.ru/top-sites/oneamour they provide powerful motivations just for ethical actions. And religion does not explain ethics, this is a means to a finish. If you’re certainly not religious, you ought to know of these variations. This article is exploring the connection among religion and ethics inside the context of travel. When it comes to which faith to join, proceeding want to get a balance between your beliefs along with your physical talk about.

Various religions support high moral standards, which are often the foundation of a moral life. In america, religions experience a strong impact on people’s lives. They influence how we think and act, and influence how we think. For example , religions may encourage the use of social networking to promote specified political ideologies. Some of these communities have ties to Russia’s government. Finally, the question is certainly: is it honest to support such groups?

A few everything is clear when speaking about the variation between integrity and faith. A religion can make intense motivations for honest behavior. When a religion may promote high ethical standards, it is not a requirement for being ethical. Typically, a person should be able to distinguish between religions depending on the values and their beliefs. For example , a Christian may experience a different view on a specific religious custom than someone who believes in atheism.

Winters Canada Digital Pressure Gauge Wholesaler

Elementor #2183

Oct 13, 2021 by admin 0 Comments

WINTERS DPG DIGITAL PRESSURE GAUGE

Rs 9,000 / Piece

Measuring Range	all
Battery Life	GOOD
Model	Winter Canada
Battery Included	Yes
Color	Black
Brand	Winter Canada
Condition	New
Connection	New

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Case Size2.5″ (63mm) Case Material ABS Rubber Boot Silicone rubber LCD Display 2″ x 3/4″ (48mm x 16mm) Connection1/4″ NPT 304 SS Sensor 316L welded, Piezo Operation Life 1 million cycles Power Supply2 x AAA battery (1.5V) Battery Life 2yrs (auto shut-off mode) Power Mode Auto or manual shut-off Display Digits

4 digits to 5,000 psi

5 digits for 10,000 psi and 15,000 psi

Pressure Unit Selection

psi, mH2O, mmHg, mbar, kPa ranges ≤ 100 psi

psi, bar, kgf/cm2, MPa, atm ranges ≥ 160 psi

Response Time≤ 3 Hz display refresh rateProof / Burst Pressure200% / 300% FSOperating / Storage Temperature

Operating: 14°F to 122°F (-10°C to 50°C)

Storage: -4°F to 167°F (-20°C to 75°C)

Accuracy±1% (±0.5% optional for gauges up to 10,000 psi) Enclosure RatingIP60

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG204

Rs 9,000 / Piece

Brand	Winters Canada
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Measuring Range	Ranges 30-0-30 psi
Model Number	DPG204

Winters Canada Digital Pressure Gauge DPG204

Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu.
More details: 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 …

Descriptions

Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu.

More details: 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressure Gauge – Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressure

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG205

Rs 9,000 / Piece

Measuring Range	30″/0/60 PSI
Brand	WINTERS CANADA
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG205

Winters Canada Digital Pressure Gauge DPG205

Winters Instruments DPG205

DPG SERIES, 2.5″ DIAL, 30″/0/60 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

Technical Specs

Item Digital Pressure Gauge
Case Color Black
Includes(2) AAA Batteries
Display4 Digits
Resolution1 Digit
Range15/0/60 PSI
Display Units PSI, mmH2O, mmHG, Mbar, kPa
Series DPG
Agency Compliance ASME B40.100
Socket Material304 Stainless Steel
Case Material ABS with Silicone Rubber Boot
Calibration Certificate Available
Features Simple 2 button operation, Reset to zero feature.
Manufacturers Warranty Length1 yr.
Powered By2 x AAA battery (1.5 V)
Gauge Nominal Dial Size2-1/2″
Basic Gauge Wetted Parts Stainless Steel
Gauge Operating Temp. Range14 Degrees F – 122 Degrees F
Gauge Connection Location Bottom
Gauge Connection Size1/4″
Basic Gauge Case Material Plastic
Digital Pressure and Vacuum Gauge Type Digital Pressure Gauge
Digital Gauge Accuracy+/-1.00%
Number of Display Digits4
Digital Gauge Display Units PSI, mbar, kPa, mmHg, mmH2O

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG206

Rs 9,000 / Piece

Measuring Range	30″/0/100 PSI
Model No.	DPG206
Brand	WINTERS CANADA
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Battery Life	good

Winters Canada Digital Pressure Gauge DPG206

WINTERS DPG206 – 30″/0/100 PSI GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG207

Rs 9,000 / Piece

Measuring Range	30″/0/150 PSI
Brand	WINTERS CANADA
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG207
Battery Life	good

Winters Canada Digital Pressure Gauge DPG207

DPG SERIES, 2.5″ DIAL, 30″/0/150 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG209

Rs 9,000 / Piece

Measuring Range	30″/0/300 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG209
Battery Life	good

Winters Canada Digital Pressure Gauge DPG209

-15/0/300 PSI DPG SERIES, 2.5″ DIAL, 30″/0/300 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM DPG209

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG210

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	2.5″, 30″ Hg
Connection	New
Battery Included	Yes
Model Number	DPG210
Battery Life	GOOD
Color	Black
Condition	New

Winters Canada Digital Pressure Gauge DPG210

The DPG Digital Pressure Gauge is designed with stainless steel wetted parts including a 316L welded diaphragm. A simple two button interface controls the gauge power, backlight and allows the user to select one of five units of measurement. A standard rubber boot protects the case from external knocks. DPG is ideal for commercial and industrial applications in both general purpose and test measurement installations. It comes with Winters’ 5 year warranty.

Simple 2 button operation
Re-zero feature and peak pressure reading
Backlight turns on when on/off button is pressed and with pressure changes
316L welded diaphragm seal
Case Size: 2.5″ (63mm)
Case Material: ABS (IP64)
Rubber Boot: Silicone rubber (IP65)
LCD Display: 2″ x 3/4″ (48mm x 16mm)
Connection : 1/4″ NPT 304SS
Sensor: 316L welded, Piezo
Operation Life: 1 million cycles
Power Supply: 2 x AAA battery (1.5V)
Battery Life: 2yrs (auto shut-off mode)
Power Mode: Auto or manual shut-off
Display Digits: 4 digits to 5,000 psi, 5 digits for 10,000 psi
Resolution: 1 digit
Pressure Unit Selection: psi, mmH2O, mmHg, mbar, kPa â‰¤ 100 psi, psi, bar, kg/cm2, mPa, atm ranges â‰¥ 160 psi
Operation Mode: Continuously reading or peak pressure reading
Response Time: â‰¤ 3 Hz display refresh rate
Proof / Burst Pressure: 200% / 300% FS
Operating / Storage Temperature: 14°F to 122°F (-10°C to 50°C), -4°F to 167°F (-20°C to 75°C)
Accuracy: ±1%

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG212

Rs 9,000 / Piece

Measuring Range	0-30 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Battery Included	Yes
Model Number	DPG212
Color	Black
Battery Life	good
Condition	New

Winters Canada Digital Pressure Gauge DPG212

Winters Digital Pressure Gauge, 2.5″, 0-30PSIDPG SERIES, 2.5″ DIAL, 0/30 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

The DPG Digital Pressure Gauge is designed with stainless steel wetted parts including a 316L welded diaphragm. A simple two button interface controls the gauge power, backlight and allows the user to select one of five units of measurement. A standard rubber boot protects the case from external knocks. DPG is ideal for commercial and industrial applications in both general purpose and test measurement installations. It comes with Winters’ 5 year warranty.

Simple 2 button operation
Re-zero feature and peak pressure reading
Backlight turns on when on/off button is pressed and with pressure changes
316L welded diaphragm seal

Case Size: 2.5″ (63mm)
Case Material: ABS (IP64)
Rubber Boot: Silicone rubber (IP65)
LCD Display: 2″ x 3/4″ (48mm x 16mm)
Connection : 1/4″ NPT 304SS
Sensor: 316L welded, Piezo
Operation Life: 1 million cycles
Power Supply: 2 x AAA battery (1.5V)
Battery Life: 2yrs (auto shut-off mode)
Power Mode: Auto or manual shut-off
Display Digits: 4 digits to 5,000 psi, 5 digits for 10,000 psi
Resolution: 1 digit
Pressure Unit Selection: psi, mmH2O, mmHg, mbar, kPa â‰¤ 100 psi, psi, bar, kg/cm2, mPa, atm ranges â‰¥ 160 psi
Operation Mode: Continuously reading or peak pressure reading
Response Time: â‰¤ 3 Hz display refresh rate
Proof / Burst Pressure: 200% / 300% FS
Operating / Storage Temperature: 14°F to 122°F (-10°C to 50°C), -4°F to 167°F (-20°C to 75°C)
Accuracy: ±1%

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG214

Rs 9,000 / Piece

Measuring Range	0/100 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Battery Included	Yes
Model Number	DPG214
Size	63 MM
Color	Black
Battery Life	good
Condition	New

Winters Canada Digital Pressure Gauge DPG214

0/100 PSI DPG SERIES, 2.5″ DIAL, 0/100 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG215

Rs 9,000 / Piece

Measuring Range	0/160 PSI
Model	DPG215
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Size	63 MM
Battery Life	good
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG215

0/160 PSI DPG SERIES, 2.5″ DIAL, 0/160 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG217

Rs 9,000 / Piece

Measuring Range	0/300 PSI
Brand	WINTERS CANADA
Connection	New
Accuracy	0.25%
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG217
Size	63 MM

Winters Canada Digital Pressure Gauge DPG217

0/300 PSI DPG SERIES, 2.5″ DIAL, 0/300 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG218

Rs 9,000 / Piece

Measuring Range	0/600 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Battery Included	Yes
Size	63 MM
Model	DPG218
Color	Black
Condition	New
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG218

0/600 PSI DPG SERIES, 2.5″ DIAL, 0/600 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG219

Rs 9,000 / Piece

Measuring Range	0/1000 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG219
Size	63 MM
Battery Life	good
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG219

0/1,000 PSI DPG SERIES, 2.5″ DIAL, 0/1000 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG220

Rs 9,000 / Piece

Measuring Range	0/1,500 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG220
Size	63 MM
Battery Life	good

Winters Canada Digital Pressure Gauge DPG220

0/1,500 PSI DPG SERIES, 2.5″ DIAL, 0/1500 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG221

Rs 9,000 / Piece

Measuring Range	0/2000 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG221
Size	63 MM
Battery Life	good
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG221

0/2,000 PSI DPG SERIES, 2.5″ DIAL, 0/2000 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG223

Rs 9,000 / Piece

Measuring Range	0/5000 PSI
Brand	WINTERS CANADA
Accuracy	0.25%
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG223
Size	63 MM
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG223

0/5,000 PSI DPG SERIES, 2.5″ DIAL, 0/5000 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge -1 To 10 bar

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	-1 TO 10 BAR
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG207R11
Size	63 MM
Battery Life	Good
Warranty	Yas

Winters Digital Pressure Gauge -1 To 10 bar

Make – CANADA
Model – DPG207R11
Range – -1 To 10 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge -1 To 25 bar

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	-1 TO 25 BAR
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG209R11
Size	63 Mm
Battery Life	Good

Winters Digital Pressure Gauge -1 To 25 bar

Make – CANADA
Model – DPG209R11
Range – -1 To 25 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge 0 To 100 bar

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	0 To 100 Bar
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG220R11
Size	63 Mm
Battery Life	Good
Warranty	Yas

Winters Digital Pressure Gauge 0 To 100 bar

Make – CANADA
Model – DPG220R11
Range – 0 To 100 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge 0 To 250 bar

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	0 TO 250 BAR
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG222R11
Size	63 MM
Battery Life	Good

Winters Digital Pressure Gauge 0 To 250 bar

Mack – CANADA
Model – DPG222R11
Range – 0 To 250 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge 0 To 400 bar

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	0 TO 400 BAR
Connection	New
Battery Included	Yes
Model Number	DPG223R11
Size	63 MM
Battery Life	GOOD
Color	Black
Condition	New

Winters Digital Pressure Gauge 0 To 400 bar

Mack – CANADA
Model – DPG223R11
Range – 0 To 400 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge 0 To 700 bar

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	0 TO 700 BAR
Connection	New
Model Number	DPG224R11
Size	63 Mm
Battery Life	Good
Color	Black
Condition	New
Warranty	Yas

Winters Digital Pressure Gauge 0 To 700 bar

Mack – CANADA
Model – DPG224R11
Range – 0 To 700 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge 1000 To 3000 mbar

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	1000 To 3000 mbar
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG205R11
Size	63 MM
Battery Life	Good
Warranty	Yas

Winters Digital Pressure Gauge 1000 To 3000 mbar

Mack – CANADA
Model – DPG205R11
Range – 1000 To 3000 mbar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG205R11

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	1000 To 3000 mbar
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG205R11
Size	63 Mm
Battery Life	Good

Winters Digital Pressure Gauge Model No DPG205R11

Mack – CANADA
Model – DPG205R11
Range – 1000 To 3000 mbar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG207R11

Rs 9,000 / Piece

Brand	Winter Canada
Model	DPG207R11
Measuring Range	-1 To 10 Bar
Connection	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Size	63 Mm
Battery Life	Good
Warranty	Yes

Winters Digital Pressure Gauge Model No DPG207R11

Mack – CANADA
Model – DPG207R11
Range – -1 To 10 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG209R11

Rs 9,000 / Piece

Brand	Winter Canada
Model	DPG209R11
Measuring Range	-1 TO 25 BAR
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Size	63 Mm
Battery Life	Good
Warranty	Yas

Winters Digital Pressure Gauge Model No DPG209R11

Mack – Canada
Model – DPG209R11
Range – -1 to 25 bar

Product Description:

Winters DPG Digital Pressure Gauge

Applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

Description & Features:

simple 2 button operation
reset to zero feature
backlight turns on when on/off button is pressed
option for display to remain continuously on

continuous peak pressure indication option
316l welded diaphragm seal
rubber boot is standard
asme b40. 100 compliant
rohs compliant
±1% accuracy (±0. 5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG220R11

Rs 9,000 / Piece

Brand	Winter Canada
Model	DPG220R11
Measuring Range	0 TO 100 BAR
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Size	63 MM
Battery Life	Good
Warranty	Yas

Winters Digital Pressure Gauge Model No DPG220R11

Make – Winters CANADA
Model – DPG220R11
Range – 0 To 100 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG222R11

Rs 9,000 / Piece

Brand	Winter Canada
Model	DPG222R11
Measuring Range	0 TO 250 BAR
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Size	63 Mm
Battery Life	Good

Winters Digital Pressure Gauge Model No DPG222R11

Make – Winters CANADA
Model – DPG222R11
Range – 0 To 250 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG223R11

Rs 9,000 / Piece

Brand	Winter Canada
Model	DPG223R11
Connection	New
Measuring Range	0 TO 400 BAR
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Size	63 MM
Battery Life	Good
Warranty	Yas

Winters Digital Pressure Gauge Model No DPG223R11

Make – Winters CANADA
Model – DPG223R11
Range – 0 To 400 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Digital Pressure Gauge Model No DPG224R11

Rs 9,000 / Piece

Brand	Winter Canada
Model	DPG224R11
Measuring Range	0 TO 700 BAR
Connection	New
Condition	New
Color	Black
Accuracy	0.25%
Accuracy (%)	0.25%
Battery Included	Yes
Size	63 MM
Battery Life	Good

Winters Digital Pressure Gauge Model No DPG224R11

Mack – Winters CANADA

Model – DPG224R11
Range – 0 To 700 bar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on

Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG203

Rs 9,000 / Piece

Measuring Range	Ranges 30-0-15 psi
Brand	WINTERS CANADA
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG203

Winters Canada Digital Pressure Gauge DPG203

Winters – 2-1/2″ Dial, 1/4 NPT Thread, 30-0-15 Scale Range,

Pressure Gauge Lower Connection Mount, Accurate to 1% of Scale Features and Benefits

Digital dials are an easy-to-read LCD display with advanced data collection.

Specs Type Digital Pressure Gauge Scale Measurement Ranges30-0-15Dial Diameter (Inch)2-1/2Connection / Mount Lower Accuracy (%)1%Type of Liquid Filler No-Fill Case Material ABS Dial Type Digital Thread Size (Inch)1/4Liquid Filled No Thread Type NPT Display Ranges 30-0-15 psi

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG208

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	30″/0/200 PSI
Connection	New
Battery Included	Yes
Display Type	YAS
Model Number	DPG208
Battery Life	GOOD
Color	Black
Condition	New

Winters Canada Digital Pressure Gauge DPG208

DPG SERIES, 2.5″ DIAL, 30″/0/200 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG211

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	0/15 PSI
Connection	New
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG211
Battery Life	GOOD

Winters Canada Digital Pressure Gauge DPG211

0/15 PSI DPG SERIES, 2.5″ DIAL, 0/15 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM DPG211

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG213

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	0/60 PSI
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG213
Size	63 MM
Battery Life	GOOD

Winters Canada Digital Pressure Gauge DPG213

Winters Instruments DPG213 DPG SERIES, 2.5″ DIAL, 0/60 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG216

Rs 9,000 / Piece

Brand	Winter Canada
Measuring Range	0/200 PSI
Connection	New
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG216
Size	63 MM
Battery Life	GOOD
Color	Black
Condition	New

Winters Canada Digital Pressure Gauge DPG216

0/200 PSI DPG SERIES, 2.5″ DIAL, 0/200 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG222

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	0/3000 PSI
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG222
Size	63 MM
Battery Life	GOOD

Winters Canada Digital Pressure Gauge DPG222

0/3,000 PSI DPG SERIES, 2.5″ DIAL, 0/3000 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG224

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	0/10000 PSI
Condition	New
Color	Black
Battery Included	Yes
Model Number	DPG224
Size	63 MM
Battery Life	GOOD
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG224

0/10,000 PSI DPG SERIES, 2.5″ DIAL, 0/10000 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

Simple 2 button operation
Reset to zero feature
Backlight turns on when on/off button is pressed
Option for display to remain continuously on
Continuous Peak pressure indication option
316L welded diaphragm seal
Rubber boot is standard
ASME B40.100 compliant
RoHS compliant
+/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi)
1 year warranty

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Winters Canada Digital Pressure Gauge DPG225

Rs 9,000 / Piece

Brand	Winter Canada
Connection	New
Measuring Range	0/15,000 PSI
Condition	New
Color	Black
Accuracy	0.25%
Battery Included	Yes
Model Number	DPG225
Size	63 MM
Battery Life	GOOD
Warranty	YAS

Winters Canada Digital Pressure Gauge DPG225

0/15,000 PSI

DPG SERIES, 2.5″ DIAL, 0/15000 PSI, ABS CASE, RUBBER BOOT, 1/4″ NPT LM

Technical Specs

Item Digital Pressure Gauge
Case Color Black
Includes(2) AAA Batteries
Display4 Digits
Resolution1 Digit
Range15/0/60 PSI
Display Units PSI, mmH2O, mmHG, Mbar, kPa
Series DPG
Agency Compliance ASME B40.100
Socket Material304 Stainless Steel
Case Material ABS with Silicone Rubber Boot
Calibration Certificate Available
Features Simple 2 button operation, Reset to zero feature.
Manufacturers Warranty Length1 yr.
Powered By2 x AAA battery (1.5 V)
Gauge Nominal Dial Size2-1/2″
Basic Gauge Wetted Parts Stainless Steel
Gauge Operating Temp. Range14 Degrees F – 122 Degrees F
Gauge Connection Location Bottom
Gauge Connection Size1/4″
Basic Gauge Case Material Plastic
Digital Pressure and Vacuum Gauge Type Digital Pressure Gauge
Digital Gauge Accuracy+/-1.00%
Number of Display Digits4
Digital Gauge Display Units PSI, mbar, kPa, mmHg, mmH2O

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Testing & Calibration Analyzer

Elementor #2145

Oct 13, 2021 by admin 0 Comments

Aspirator Bulb

Rs 60 / Piece

Model Number	Model-A-350
Brand	DWYER USA
Usage	Laboratory
Usage/Application	Test instrument calibration
Temperature Range	32 to 122 Degree F (0 to 50 Degree C).
Diameter	16 to 200 mm
Condition	New
Application	Pressure transmitter calibration

Aspirator Bulb

The Model A-350 Aspirator Bulb can be used to source pressure for calibration and leak checking tests. Simply squeeze the bulb after the tubing is connected to generate pressure. For applications such as our CO2 indicator, the aspirator bulb can be squeezed before inserting the tubing to draw a vacuum to pull the smoke or air from a duct or stack into the gage.

Features:

Offers vacuum or positive pressure sourcing
Compact and portable
Most cost effective option
Reference gage recommendation: Magnehelic 2010

Application:

Test instrument calibration
Pressure switch calibration
Pressure transmitter calibration
Smoke leak testing
Calibration and leak check testing

Additional Information:

Item Code: Model-A-350

Aspirator Bulb

Rs 60 / Piece

Model Number	Model-A-350
Brand	DWYER USA
Usage	Laboratory
Usage/Application	Test instrument calibration
Temperature Range	32 to 122 Degree F (0 to 50 Degree C).
Diameter	16 to 200 mm
Condition	New
Application	Pressure transmitter calibration

Aspirator Bulb

Features:

Offers vacuum or positive pressure sourcing
Compact and portable
Most cost effective option
Reference gage recommendation: Magnehelic 2010

Application:

Test instrument calibration
Pressure switch calibration
Pressure transmitter calibration
Smoke leak testing
Calibration and leak check testing

Additional Information:

Item Code: Model-A-350

Calibration Pump

Rs 65,000 / Piece

Usage/Application	Compact and portable
Model	Model-A-396A
Condition	New
Place Of Origin	DELHI
Temperature	-20 to 120 Degree F (-29 to 49 Degree C)
Brand	Dwyer Usa
Usage	Test instrument calibration
Weight	14 oz (400 g).
Working Pressur	72 psi (5 bar)
Output Connection	1/8 ” NPT(F
Length	7-7/8 ” (20 cm
Diameter	1-3/8 ” (3.5 cm

Calibration Pump

The MODEL A-396A Calibration Pump serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Includes volume adjuster enabling fine pressure control and bleed valve. Serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Includes volume adjuster enabling fine pressure control and bleed valve. Generates pressures from a fraction of an inch . Includes barbed fitting, tee connector and three 36″ lengths of vinyl tubing.

Features:

Offers wide pressure sourcing capability
Compact and portable
Integral relief valve for fine adjustment
Reference gage recommendation

Application:

Test instrument calibration
Pressure switch calibration
Pressure transmitter calibration

Additional Information:

Item Code: Model-A-396A

Flex Tube U Tube Manometer

Rs 1,400 / Piece

Usage/Application	Duct static pressure
Model	Series-1221-1222-1223
Brand	Dwyer Usa
Condition	New
Pressures	100 psi
Range	8″ to 36″
Applications	Calibration labs
Application	Filter monitoring

Flex Tube U Tube Manometer

These inexpensive manometers measure positive, negative and differential pressures. Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple “U” Tube with the durability of tough, long-lasting plastic construction. Columns are of .375″ O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.

You can choose from numerous models and features including over-pressure safety traps, in full scale ranges from 8″ to 36″ of water or mercury. All are suitable for total pressures to 100 psi – for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manometer is needed. Standard ranges and markings as shown, or special ranges, colors, logos and brand names for OEM quantity orders are available.

Features:

Minor Divisions of 1/10″ water column (or 2mm water column on metric units) are silkscreened in jet black on stark white scale for positive definition. Easy to read, even at a distance, they are acrylic coated for permanence. All models are furnished with one 3/4 ounce bottle of fluorescein green color concentrate with special wetting agent for W/M models, or 3/4 ounce bottle of red gage fluid for “D” units.
Series 1221 Manometer – Our simplest, lowest cost basic U-gage. A dependable U-tube manometer that withstands hard use and provides accurate, high visibility readings. For use with water, mercury or red gage fluid. For mercury filled manometers, a scale clamp bar, Dwyer® Part No. A-363 (available as an extra for Series 1221 – and standard on Series 1222) is recommended. One pair of carrying plugs and a pair of non-kink vinyl tube connectors are included with each manometer.
Series 1222 Manometer – All the features of the 1221 plus magnetic clips for mounting to any vertical steel surface, and clamp bar to insure against U-tube slipping. (Especially recommended for manometers used with mercury.) Both magnets are easily removed and replaced at the user’s convenience.
Series 1223 Manometer – Our finest U-gage – for either portable or stationary use. Safety traps prevent loss of indicating fluid in case of accidental over-pressure. Tubing is permanently bonded to a molded, high impact acrylic plastic top that contains safety traps. Large magnetic clips and clamp bar are provided. Standard type “a” connections include two rapid shut-off type molded nylon tubing connections, two 3′ lengths of flexible Tygon® plastic tubing, and two 1/8″ pipe thread to tube adapters.

Applications:

Duct static pressure
Calibration labs
Filter monitoring

Additional Information:

Item Code: Series-1221-1222-1223

Handheld Digital Manometer

Rs 9,500 / Piece

Display Range	0.42″ (10.6 mm) 4 digit LCD.
Weight	10.2 oz (289 g).
Condition	New
Storage Temperature	-4 to 176 Degree F (-20 to 80 Degree C).
Model	Series-477A
Brand	Dwyer Usa
Pressure Hysteresis	+/-0.1% FS.
Ambient Temperature	32 to 140 Degree F (0 to 60 Degree C)

Handheld Digital Manometer

The Popular Model 477 is now available with 0.1% full-scale accuracy in the new Series 477A. The 477A contains a highly accurate differential pressure sensor that offers a 0.1% full-scale accuracy on air ranges from 20 in w.c. to 100 psid. Series 477A Handheld Digital Manometers are packed with features needed to make pressure measurement and recording faster, easier and more accurate than ever. Instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. A non-volatile memory function enables storage of up to 40 readings perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct.

The 477A is also ideal for maintenance personnel or technicians that require a highly accurate standard to check their instrumentation or equipment to ensure proper performance. When working in poorly lighted areas, just switch on the handy backlight feature. The manometer automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. Included is an audible alarm to warn of overpressure plus a visual alarm warning in case ambient noise levels are too high to hear the alarm. Audible alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.

Clear, concise operating instructions for all functions are printed on the rear of the rugged extruded aluminum case for quick reference. One-piece front membrane fully protects all keys from dust and moisture; wipes clean in seconds. Detailed written instructions, a wrist strap and 9 V alkaline battery are included.

Features:

Measure positive, negative, or differential pressures
Instant selection from up to nine english/metric units
Stores 40 readings in memory for later reference
Both audible and visual overpressure alarms
Operates up to 100 hours on a single 9 volt battery
New adjustable damping feature for averaging fluctuating reading

Specification:

Wetted Materials : Consult factory.
Accuracy : ±0.10% of full scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scale from 32 to 60 and 78 to 104°F (0 to 15.6 and 25.6 to 40°C).
Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.
Process Connections : Two barbed connections for use with 1/8″ (3.18 mm) or 3/16″ (4.76 mterials : Consult factory.
Accuracy : ±0.10% of full scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scale from 32 to 60 and 78 to 104°F (0 to 15.6 and 25.6 to 40°C).
Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.
Process Connections : Two barbed connections for use with 1/8″ (3.18 mm) or 3/16″ (4.76 mm) I.D. tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only. Two compression fittings for use with 1/8″ (3.18 mm) I.D. x 1/4″ (6.35 mm) O.D. tubing for 477A-6 and 477A-7 only.m) I.D. tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only. Two compression fittings for use with 1/8″ (3.18 mm) I.D. x 1/4″ (6.35 mm) O.D. tubing for 477A-6 and 477A-7 only.

Additional Information:

Item Code: Series-477A

Handheld Indoor Air Quality Meter

Rs 15,250/ Piece

Model No.	Model-AQH-20
Brand	Dwyer Usa
Usage/Application	Building commissioning
Applications	Green house monitoring
Display	4 digits for temperature/CO2 and 3 digits for humidity.
Temperature	32 to 122 Degree F (0 to 50 Degree C).
Humidity	0 to 95% RH. (Non-Condensing)
Warm Up Time	30 S
Weight	6.76 oz (200 g).

Handheld Indoor Air Quality Meter

The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.

Features:

All-in-one unit for carbon dioxide, temperature, and humidity
Large backlit LCD for visibility in dark areas
User configurable alarms for audible indication of hazardous conditions

Specification:

Ranges : CO2: 0 to 2000; Temperature: 14 to 140°F (-10 to 60°C); Relative Humidity: 0.0 to 99.9% RH.
Accuracy : CO2: ±30 ppm ±5% of reading; Temperature: ±0.9°F (±0.6°C); Humidity: ±3% RH (10 to 90%), ±5% (0.0 to 9.9% or 90 to 99.9%).
Resolution : CO2: 1 ppm; Temperature: 0.1°F (0.1°C); Humidity: 0.1% RH.
Response Time : CO2: < 30 s.; Temperature: < 2 m.; Humidity: < 10 m.
CO2 Sensor : Non-dispersive infrared.
Power Requirements : (4) 1.5 V AA alkaline batteries, included, user replaceable.

Applications:

Building commissioning
Green house monitoring

Additional Information:

Item Code: Model-AQH-20

Hydronic Differential Pressure

Rs 15,000 / Piece

Place Of Origin	DELHI
Application/Usage	Hydronic valve balancing
Weight	14.1 oz (400 g).
Usage/Application	Chiller to coils for freeze protection
Brand	DWYER USA
Condition	New
Process Connection	Two 1/8″ (3.18 mm) female NPT.
Applications	Measure pressure drop across pumps
Model	Series-490A
Display	0.42″ (10.6 mm) 4 digit LCD.
Application	Refrigerant pressure testing
Pressure Hysteresis	+/-0.1% FS.
Electronic Temperature Limits	32 to 140 Degree F (0 to 60 Degree C)
Storage Temperature Limits	-4 to 176 Degree F (-20 to 80 Degree C)

Hydronic Differential Pressure

The SERIES 490A Hydronic Differential Pressure Manometers are versatile, handheld, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A new feature added to the Series 490A is a field adjustable damping, which allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications.

Hydronic meter kit includes: (2) six foot high-pressure rated tubing with shut off valves, high pressure 3-way valve, 8 ft poly tubing for purges, hard travel case, handheld carrying strap, 1/16″ x 1 1/2″, 1/8″ x 3″ and 1/8″ x 1-1/2″ pairs of pressure probes, 90° Flare to 1/4″ NPT fittings, adjustable 8″ wrench, PTFE Tape, and magnetic protective rubber boot. NIST Calibration Certificate comes standard.

Dwyer Instruments, Inc. was recognized for excellence in product design in the 14th annual Dealer Design Awards Program sponsored by The Air Conditioning Heating & Refrigeration News magazine (The ACHR News). An independent panel of contractors acted as judges in the contest that had 81 entries. The company’s Series 490A-HKit Hydronic Differential Pressure Manometer was the Bronze Award Winner in the Electronic and Hand Tools category. The ACHR News is the leading trade magazine in the heating, ventilating, air conditioning, and refrigeration industries.

Features:

Seven user-selectable English and metric units
Stores up to 40 readings for later recall
Backlight for use in dim areas
Digital dampening for low pressure – high resolution logging accuracy
Automatic resolution adjustment for finer control

Speciication:

Service : Compatible gases & liquids.
Wetted Materials : Without valve: 316L SS, -3V option: 316LSS, Buna-N, silicone, grease, PTFE, brass 360, copper, reinforced acetal copolymer.
Accuracy : ±0.5% FS, 60 to 78°F (15.6 to 25.6°C); ±1.5% FS from 32 to 60°F and 78 to 104°F (0 to 15.6°C and 25.6 to 40°C)
Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.

Applications:

Chiller to coils for freeze protection
Hydronic valve balancing
Measure pressure drop across pumps
Refrigerant pressure testing

Additional Information:

Item Code: Series-490A

Low Pressure Calibration Pump

Rs 21,000 / Piece

Usage/Application	Instrument calibration
Material	Ram/adapters 316 SS; Body Steel/aluminum; Seals Buna-N.
Brand	DWYER USA
Item Code	Model-LPCP
Model Number	Model-LPCP
Features	Heat insulation and heat preservation, no negative side effects from temperature changes
Media	Air
Output Ranges	5.8 psi (0.4 bar) vacuum to 5.8 psi (0.4 bar) positive pressure.
Pressure Resolution	0.01 Pa; 0.0001 mbar.
Process Connection	M20x1.5 or 1/4″ NPT.
Gage Connection	M20x1.5 or 1/4″ NPT.
Weight	2.21 lb (1.0 kg).

Low Pressure Calibration Pump

The Model LPCP Low Pressure Calibration Pump is a low air pressure source with the ability to easily adjust and stabilize. This hand pump possesses a pressure range of ± 5.8 psi; uses air as the media, and can adjust the pressure easily with great stability. The LPCP is made up of quick connectors for fast instrument connect and disconnect. The pump has a heat-insulator between the cover and pressure chamber to lessen the heat effect during the micro-pressure calibration. The adjusting resolution is up to 0.01 Pa (0.0001 mbar). These features make the LPCP ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.

Features:

Portable
Heat insulation and heat preservation, no negative side effects from temperature changes
Open structure for convenient maintenance of the pumps
Easy to operate: pressure is precisely set with a simple turn of the handle, allowing you to calibrate gages quickly and accurately
Great seal performance: minimum leakage

Application:

Instrument calibration
Laboratories
Production areas

Additional Information:

Item Code: Model-LPCP

Low Pressure Calibration Pump

Rs 22,500 / Piece

Weight	8.4 lb (3.8 kg).
Model	Series-BCHP
Condition	New
Brand	Dwyer Usa
Material	Anodized aluminum, brass, and ABS.
Usage/Application	Instrument calibration
Media	Air
Output Ranges	-28 in Hg to 870 psi (-0.95 to 60 bar).
Process Connections	1/4″ female BSP.
Gage Connection	1/2″ female BSP.

Low Pressure Calibration Pump

The Series BCHP Calibration Test Pump is able to generate pressure and vacuum for adjusting or calibrating pressure gages, transmitters, or switches. The pump is hand operated and has a pneumatic pressure range of -28 in Hg to 870 psi (-0.95 bar to 60 bar). Dual pressure ports allow two instruments to be connected to the pump without additional fittings. The Series BCHP can be used in laboratories and production areas. The fine adjustment valve on this pump ensures precise measurements.

Features:

Dual pressure ports for ease of use
Fine adjustment valve ensures precise measurements

Application:

Instrument calibration
Laboratories
Production areas

Additional Information:

Item Code: Series-BCHP

Pneumatic Calibration Hand Pump

Rs 18,500 / Piece

Model	Series-PCHP
Body Material	Stainless Steel
Condition	New
Materials	Stainless steel fittings, anodized aluminum housing, plastic/rubber handles, and nitrile o-rings.
Brand	DWYER USA
Weight	2 lb (0.91 kg).
Media	Air and compatible gases only.
Output Ranges	0-28″ Hg to 600 psi (-0.945 to 40 bar).
Process Connection	1/4″ NPT/BSP.
Gage Connection	1/8″ NPT/BSP.

Pneumatic Calibration Hand Pump

The Series PCHP Pneumatic Hand Pump comfortably sources pressure and vacuum to check calibration of gages, switches, transmitters, and recorders. The contoured cushion handles provide extra comfort while preventing the pump from sliding. The oversized check valve provides smooth operation throughout the output range. The dual o-rings on all pistons ensure zero leakage.

Other Details:

Model	Description
PCHP-1	Pneumatic hand pump, range 600 psi.
PCHP-1K	Pneumatic hand pump, range 600 psi, with hose kit.
PCHP-HK	High pressure hose for PCHP-1 hand pump.

Request
Callback

Additional Information:

Item Code: Series-PCHP

Series 476a Single Pressure Series 478a Digital Manometer

Rs 12,500 / Piece

Brand	DWYER USA
Model	Series-476A
Application	Industrial
Display	4 digit LCD (.425″H x .234″W digits).
Condition	New
Pressure Hysteresis	+/-0.1% FS.
Pressure Limits	5 psig (0.34 bar).
Ambient Temperature	0 to 140 Degree F ( 17.8 to 60 Degree C).
Compensated Temperature Limits	32 to 104 Degree F (0 to 40 Degree C).
Thermal Effect	0.05% F.S./ Degree F
Applications	Verify field instrumentation performance
Applications II	Adjust fuel mixture on combustion systems Request Callback

Series 476a Single Pressure Series 478a Digital Manometer

The SERIES 476A Single Pressure Digital Manometer can be used to measure low pressures from -20 to 20 in w.c. with ±1.5% FS accuracy. The SERIES 478A Differential Pressure Digital Manometer can be used to measure positive, negative, or differential pressures. Both units are constructed of an extruded aluminum case for exceptional durability.

Features:

One button auto-zero function
Auto power off function to conserve battery life
Rugged extruded aluminum housing
Instant selection of up to nine English/metric units
±0.5% FS accuracy

Specification:

Service : Air and compatible gases.
Wetted Materials : Consult factory.
Accuracy : ±1.5% FS @ 72°F (22.2°C). Includes linearity and repeatability.
Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.
Process Connections : Barbed connection for use with 3/16″ or 1/4″ I.D. tubing.

Applications:

Verify field instrumentation performance
Adjust fuel mixture on combustion systems

Additional Information:

Item Code: Series-476A

Smart Air Hood Balancing Instrument

Rs 2.25 Lakhs/ Piece

Model Number	Series-SAH
Condition	New
Weight	5.75 lb (2.6 kg).
Place Of Origin	DELHI
Hood Type	New
Brand	DWYER USA
Usage/Application	Commissioning, testing, adjusting and balancing volumetric air flow from diffusers, grilles, and reg
Resolution	1 CFM (1.7 m3/h) (.5 l/s).
Housing Material	Polypropylene

Smart Air Hood Balancing Instrument

The Series SAH SMART Air Hood® Balancing Instrument is the most accurate and easy to operate air flow hood on the market. By using the included hood stand and wireless communications to the handheld, a single operator can balance a branch in less time than traditional balancing teams. Besides being lighter than most traditional capture hoods, the ergonomic design makes the Series SAH easy to maneuver, with less physical stress. The rugged polypropylene base hood features Quad Flow Design Technology for controlling air flow and minimizing back pressure, which yields superior measurement accuracy. The Wi-Fi direct communication gives reliable communication with a distance of up to 200 yards (183 m) between the hood and the handheld test instrument. The SMART Air Hood® Balancing Instrument includes the PredictAir™ Application Software which reduces the number of steps in the air flow balancing process using Predictive Balancing’s Express Balance mode. Predictive Balancing is a method of predicting the optimal flow set point for each register and the order in which they should be adjusted.

Specification:

Volume Flow Ranges : Supply: 40 to 2000 CFM (68 to 3398 m3/h) (19 to 944 l/s); Exhaust: 80 to 2000 CFM (136 to 3398 m3/h) (38 to 944 l/s).
Accuracy > 40 CFM : ±3% of reading ±7 CFM (11.9 m3/hr) (3.3 l/s)
Power Requirements : 3.6 V NCR18650B MH12210 lithium ion battery, included, user replaceable or (4) 1.5 V AA alkaline batteries, not included, user replaceable.

Applications:

Commissioning, testing, adjusting and balancing volumetric air flow from diffusers, grilles, and registers in HVAC systems

Features

Patent pending Quad Flow Design Technology directs the circulating air patterns to provide a more even air flow that minimizes backpressure enabling accurate readings

Patent pending Predictive Balancing is a process that guides the balancing technician on setting the optimal flow set point for each sequential terminal. With the PredictAir™ Application Software, the balancing process takes much less time than traditional air balancing methods
The ergonomic design is much lighter and easier to work with than the existing bulky air hoods, providing greater maneuverability and less physical strain. One technician can complete the air balancing

Wi-Fi direct wireless communication provides a range up to 200 yards (183 m)

Additional Information:

Item Code: Series-SAH

Thermo Hygrometer

Rs 650 / Piece

Display	4.5 digit LCD.
Weight	16 oz (454 g).
Application	Industrial
Item Code	Model-485B
Humidity	0 to 100% (non-condensing).
Model	Model-485B
Usage/Application	Building commissioning
Brand	DWYER USA
Minimum Order Quantity	1 Unit
Process Temperature	-40 to 176 Degree F (-40 to 80 Degree C).
Ambient Temperature	5 to 125 Degree F (-15 to 51 Degree C)
Resolution	0.1%, 0.1 Degree F/ Degree C.
Probe Length	8″ (203 mm) insertion.

Thermo Hygrometer

The MODEL 485B Thermo-Hygrometer is a versatile, compact, handheld instrument for measuring percentage of relative humidity and temperature in °F or °C. Dew point and wet bulb temperatures are derived from the relative humidity and temperature measurements and are displayed on the LCD.

Features:

Compatible with Dwyer AP1 thermo-anemometer and VP1 100 mm vane thermoanemometer probes (sold separately)
Hold feature to freeze current readings on the display
Stores up to 99 readings for future evaluation

Specification:

Service : Humidity, temperature, wet bulb and dew point temperature detection in clean air.
Accuracy Relative Humidity : ±2% FS over 10 to 90% @ 77°F (25°C).
Range Temperature : -20 to 140°F (-28 to 60°C).
Accuracy Temperature : ±0.54°F @ 72°F (±0.3°C @ 25°C).
Power Requirements : 9 V alkaline battery, included, user replaceable.

Applications:

Building commissioning
Pulp & paper

Additional Information:

Item Code: Model-485B

Universal Handheld Test Instrument

Rs 25,000 / Piece

Brand	DWYER USA
Model Number	Model-UHH
Application	Industrial
Display	4.3″ QHD Gorrilla glass touch screen, 960×540.
Usage/Application	Building commissioning
Humidity	5 to 95% RH.
Weight	15.9 oz (450 g)
Wireless Distance	50′ (15 m) or greater.
Response Time	1 S
Operating Temperature Range	-4 to 140 Degree F (-20 to 60 Degree C)
Storage Temperature	-40 to 176 Degree F (-40 to 80 Degree C)
Power Requirements	2000mAh lithium ion battery, installed functional, non-replaceable.
Memory	RAM 1G & ROM 4G.
Operating System	Android 4.2.2.
CPU	MTK6589W Quad Core 1.2 GHz.
Enclosure Rating	IP68

Universal Handheld Test Instrument

THE MODEL UHH2 UNIVERSAL HANDHELD TEST INSTRUMENT provides the functionality and versatility of the Mobile Meter® Software App on a rugged IP68 Android® based handheld. Wireless anemometer, hygrometer, and pressure probes communicate to the handheld using Bluetooth SIG, Inc. wireless technology and can all be displayed simultaneously. Each UHH2 includes a UHH2 handheld base unit, UHH-BTG wireless mobile gateway, two USB charging cables, charging block, mini-screwdriver, user manual, and headphones.

Dwyer Instruments was recognized for excellence in product design in the 12th annual Dealer Design Awards Program sponsored by The Air Conditioning Heating & Refrigeration News magazine. An independent panel of contractors acted as judges in the contest that had 107 entries. The company’s Model UHH2 Universal Handheld Test Instrument was the Silver Award Winner in the Testing and Monitoring product category. The ACHR News is the leading trade magazine in the heating, ventilating, air conditioning, and refrigeration industries.

Features:

Rugged weatherproof housing withstands 1.5 meter drop test
Wireless measurement of pressure, air velocity, air flow, temperature, and humidity
Share logged data directly from handheld over Wi-Fi, GSM or CDMA networks

Applications:

Building commissioning
Building balancing
Testing HVAC equipment performance

Additional Information:

Item Code: Model-UHH

Vane Thermo Anemometer Probe

Rs 4,500 / Piece

Brand	Dwyer USA
Application	Industrial
Model	Model-VP2
Weight	13.6 oz (385 g).
Item Code	Model-VP2
Usage/Application	Building Commissioning
Process Temperature	-20 to 212 Degree F (-29 to 100 Degree C)
Ambient Temperature	5 to 125 Degree F (-15 to 51 Degree C)
Probe Length	8″ (203 mm) insertion.
Battery Charging Limits	32 to 113 Degree F (0 to 45 Degree C). (Wireless Only).

Vane Thermo Anemometer Probe

The Model VP2 Wireless 100 mm Vane Thermo-Anemometer Probe measures air velocity, air flow, humidity, and temperature when combined with the Model UHH2 Universal Handheld. By having a larger diameter, the rotating vane is able to measure velocities down to 50 fpm or 0.25 m/s. An arrow is molded into the vane housing to depict the flow direction.

Features:

Allows for one handed operation for ladder use safety
Stable 50′ (15 m) wireless range

Specification:

Range : Air Velocity: 40 to 5000 fpm (0.2 to 25 m/s); Volumetric Air: 999,999 in selected flow units; Temperature: -20 to 212°F (-29 to 100°C); Relative Humidity: 0 to 100% RH.
Accuracy : Air Velocity: 0.25 to 10 m/s: ±1.5% of reading ±20 fpm (±0.1 m/s); 10 to 20 m/s: 1.5% of reading ±40 fpm (±0.2 m/s); 20 to 25 m/s: ±1.5% of reading ±60 fpm (±0.3 m/s). Temperature: ±0.54°F @ 77°F (±0.3°C @ 25°C). Relative Humidity: ±2% @ 77°F (25°C) (10 to 90% RH); ±4% (0 to 10% RH and 90 to 100%).
Response Time : Air Velocity and Air Volume: 1 s; Temperature and Relative Humidity: 1.5 s.
Power Requirements : 3.7 V YT562447 Lithium ion battery, installed functional, user replaceable. (Note: Intended to be operated with power cables less than 3 m in length). (Wireless Only).
Handle Enclosure : Thermoplastic elastomer over polycarbonate.
Supplied With : Wrist strap.

Applications:

Building Commissioning
Building HVAC Test and Balance

Additional Information:

Item Code: Model-VP2

Air Quality Test Instruments Kits

Rs 26,500 / Piece

Condition	New
Usage/Application	Building commissioning
Humidity	5 to 95% RH.
Storage Temperature	-4 to 176 Degree F (-20 to 80 Degree C).
Response Time	1 S
Application	Building balancing
Product Code	Series-AQTIA
Model Number	Series-AQTIA
Brand	DWYER USA
Display Style	4.3″ QHD Gorilla glass
Applications	Testing HVAC equipment performance
Wireless Distance	50′ (15 m)
Operating Temperature Range	-4 to 140 Degree F (-20 to 60 Degree C)

Air Quality Test Instruments Kits

The Series AQTIA Air Quality Test Instruments combine the versatile Model UHH2 handheld base with various compatible probes and modules. The versatile combination provides a line of instruments capable of streamlining a technician’s everyday testing by combining all into one product and using Bluetooth SIG, Inc. wireless technology for ease of use.

Features:

Rugged IP68 housing withstands 1.5 meter drop test
Wireless measurement of pressure, air velocity, air flow, temperature, and humidity

Applications:

Building commissioning
Building balancing
Testing HVAC equipment performance

Additional Information:

Item Code: Series-AQTIA

Ellipsoidal Tip Pitot Tube

Rs 5,000 / Piece

Features	Designed to meet ISO standard 3966 commonly required in UK and Europe
Application	Industrial
Material	SS
Process Connection	1/4″ (6 mm)
Brand	Dwyer Usa
Usage/Application	Monitor or control air velocity or air flow when combined with differential pressure gage, switch, o
Model Number	Series-160E

Ellipsoidal Tip Pitot Tube

The Series 160E Ellipsoidal Tip Pitot Tube uses a precision crafted tip configuration, which allows air to pass smoothly with minimum turbulence for consistent, reliable readings. Sliding depth indicators grip firmly to ensure uniform insertion when measuring traverses across ducts. Total and static pressure taps are 1/4″ (6 mm) and are permanently silver soldered to the connection block, making them leak-proof and durable.

Features:

Designed to meet ISO standard 3966 commonly required in UK and Europe
Ellipsoidal tip design for improved accuracy
304SS construction adds strength, resists corrosion
Adjustable depth indicators for fast, consistent traverses
Alignment indicator helps keep tip parallel to flow

Applications:

Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter

Additional Information:

Item Code: Series-160E

Gas Pressure Manometer

Rs 1,260 / Piece

Model Number	Series-1213
Temperature Range	140 Degree F (60 Degree C)
Pressure Range	15″ w.c. (381 mm)
Application/Usage	Combustion supply gas monitoring
Condition	New
Weight	5 oz (142 g).
Product Weight	5 oz (142 g).
Brand	DWYER USA
Piping Connections	1/8″ male NPT connector provided.
Wetted Materials	Vinyl, PVC and nylon.

Gas Pressure Manometer

Provide visual indication of pressure with the Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 1/8″ nylon male NPT to barb fitting.

Features:

Used to monitor any compatible gas up to 15 in w.c.
Durable plastic housing for long term use
Economically priced

Applications:

Combustion supply gas monitoring

Request
Callback

Additional Information:

Item Code: Series-1213

Handheld CO/CO2 Gas Analyzer

Rs 72,000 / Piece

Display Type	Dual LCD display.
Weight	2.21 lb (1 kg)
Model Number	Model-1205B
Usage/Application	Service and adjustment of boilers, ovens, and other combustion equipment
Power	100 to 240 VAC, 50 to 60 Hz or (5) AA NiMH batteries, internal, factory replaceable.
Resolution	CO 1 ppm; CO2 1 ppm.
Application	Industrial Use
Brand	DWYER USA
Range	CO 0 to 1000 ppm, overflow 2000 ppm; CO2 200 to 4000 ppm, overflow 9999 ppm.
Temperature Range	32 to 104 Degree F (0 to 45 Degree C).
Condition	NEW
Humidity	10 to 90% RH. (Non-Condensing)
Battery Life	6 hours with full charge and pump on.

Handheld CO/CO2 Gas Analyzer

The MODEL 1205B Handheld CO/CO 2 Gas Analyzer accurately measures the concentration of carbon monoxide (CO) and carbon dioxide (CO 2 ) in a duct or space and displays the measurement on a dual line backlit LCD. The unit’s memory stores up to 255 sets of readings that are logged manually or auto-logged with 1 to 10 minute intervals. Results can then be printed via an optional infrared printer.

Features:

Displays carbon monoxide and carbon dioxide concentrations simultaneously
Stores up to 255 sets of readings for future evaluation
User configurable alarms

Application:

Service and adjustment of boilers, ovens, and other combustion equipment

Specification:

Accuracy : CO: ±5 ppm<100 ppm; ±5%>100 ppm; ±10%>1000 ppm. CO2: ±20 ppm<400 ppm; ±5%<4000 ppm; ±10%>4000 ppm.

Additional Information:

Item Code: Model-1205B

Handheld Flue Gas Combustion Analyzer

Rs 75,000 / Piece

Temperature	32 to 104 Degree F (0 to 40 Degree C)
Weight	1.7 lb (0.77 kg).
Brand	Dwyer Usa
Model	Model-1207A
Condition	New
Application	Industrial Use
Make	DWYER USA
Usage/Application	Service and adjustment of boilers, ovens, and other combustion equipment
Place Of Origin	DELHI
Hose	10 ft (3 m)

Handheld Flue Gas Combustion Analyzer

The Versatile Model 1207A Handheld Flue Gas Combustion Analyzer makes adjusting boilers for optimum efficiency quicker and easier. With the large LCD display, users can monitor four parameters simultaneously and change the parameters shown using the rotary dial selection switch. For extra protection, the analyzer comes standard with a protective boot and magnetic back. In order to track the measurements, the 1207A can store up to 255 time stamped test sets in memory and can output measurements to a serial printer.

The 1207A comes preprogrammed for Natural Gas, Light Oil, Propane, Butane, LPG, and Wood Pellets. Along with analyzing combustion measurements, the analyzer can be used as a CO/CO2 indicator, pressure manometer, or thermocouple thermometer.

Features:

Displays 4 configurable parameters simultaneously
Stores up to 255 time stamped test sets for future evaluation

Specification:

Range : O2: 0 to 21%, CO: 0 to 2000 PPM (4000 PPM Max for 15 minutes), CO2: 0 to 30%, Temp. (Flue and net): 32 to 1112°F (0 to 600°C), Efficiency: 0 to 99.9%, Excess Air: 0 to 250%.
Accuracy : O2: ±0.2%, CO: ±10 PPM < 100 PPM else ±5% of reading, CO2: ±0.3% reading, Temp. (Flue and net): ±2°C ±0.3% reading, Efficiency: ±1% reading, Excess Air: ±0.2%.
Resolution : O2: 0.1%, CO: 1 PPM, CO2: 0.1%, Temp. (Flue and net): 0.1°F/C, Efficiency: 0.1%, Excess Air: 0.1%.
Power Requirements : (8) AA alkaline batteries, installed functional, user replaceable, (4) AA NiMH batteries, included, user replaceable (charger included) or optional power adapter.
Pre-Programmed Fuels : Natural Gas, Light Oil, Propane, Butane, LPG, and Wood Pellets.
Probe : 11.8″ (300 mm) length x 0.25″ (6 mm) diameter with 7.8″ (200 mm) stainless steel shaft.

Applications:

Service and adjustment of boilers, ovens, and other combustion equipment

Additional Information:

Item Code: Model-1207A

Handheld Portable Data Viewer

Rs 65,000 / Piece

Resolution	240 X 320.
Weight	3.9 oz (111 kg).
Model	Model-DW-DATAPAD
Condition	New
Brand	DWYER USA
Usage/Application	Calibration labs
Temperature Range	0 to 50 Degree C (32 to 122 Degree F).
Display Range	2.8″ full color TFT touch screen LCD display.
Display Type	Digital
Battery Life	5 to 8 hours
Operating Temperature Range	0 to 50 Degree C (32 to 122 Degree F).

Handheld Portable Data Viewer

The Model DW-DATAPAD Handheld Portable Data Viewer configures and reads data from up to 500 DW-USB data loggers and utilizes a 2.8″ full color TFT touch screen display. Data can be displayed as a trend graph or a statistical summary, and can also be transferred to a computer using the provided cable and Windows® based software. Model DW-DATAPAD features a rechargeable lithium battery and has an average life of 5 to 8 hours under constant use.

Features:

2.8″ full color TFT touch screen simplifies navigation through configuration menus
Rechargeable lithium battery has a 5 to 8 hour life when constantly used

Specification:

Data Recording Capacity : Internal flash memory, greater than 8.5 million readings.
Power Requirements : CA374170 lithium ion rechargeable battery, installed functional, factory replaceable.
Interface : Touch screen and single front-panel push-button power switch.
Connections : 1 USB type A socket (top of unit) for data logger connection. 1 micro-USB (bottom of unit) for connection of unit to PC via supplied USB cable.
Compatible Data Loggers : DW-USB-1, DW-USB-1-HT, DW-USB-1-LCD, DWUSB- 2, DW-USB-2-HA, DW-USB-2-HA-LCD, DW-USB-2-LCD, DW-USB-6, DWUSB- 6-LCD, and DW-USB-LITE.

Applications:

Calibration labs
Environmental chambers
Pharmaceutical plants
Storage warehouses

Additional Information:

Item Code: Model-DW-DATAPAD

Hydraulic Calibration Hand Pump

Rs 18,500 / Piece

Model Number	Series-HCHP
Brand	DWYER USA
Condition	New
Weight	3 lb (1.36 kg)
Output Ranges	0 to 10000 psi (0 to 700 bar).
Process Connection	1/4″ NPT/BSP.
Gage Connection	1/4″ NPT/BSP.
Materials	SS, polyurethane, anodized hard-coat aluminum, PTFE, and nitrile.

Hydraulic Calibration Hand Pump

The Series HCHP Hydraulic Calibration Hand Pump utilizes a fully adjustable stroke control that allows for quick priming, easy pumping and fast pressure generation up to 10000 psi (700 bar). The ergonomically engineered handles provide extra comfort, while the triple filtration system ensures pump operation in spite of dirty conditions. The shatterproof reservoir and stainless steel construction guarantee leak free operation. The Series HCHP has oversized check valves to provide smooth controlled operation.

Other Details:

Model	Description
HCHP-1	Hydraulic hand pump, range 10,000 psi.
HCHP-1K	Hydraulic hand pump, range 10,000 psi, with hose kit.

Additional Information:

Item Code: Series-HCHP

Pneumatic Hand Pump

Rs 18,000 / Piece

Weight	1.5 lb (680 g).
Materials	Acetal plastic and anodized aluminum.
Brand	DWYER USA
Body Material	Acetal plastic and anodized aluminum.
Condition	New
Temperature	150 Degree F (65.6 Degree C).
Model	Series-CHP
Pressure	150 psig (10.34 bar).
Output Range	CHP-P 0 to 100 psi; CHP-V 0 to -28.8″ Hg.
Process Connection	Two 1/8″ female NPT ports, one with a removable plug.
Displaced Volume	Approximately 4 in3
Dimensions	9″ length x 1.5″ diameter

Pneumatic Hand Pump

The Series CHP Pneumatic Hand Pump is the most dependable and rugged pump for applications up to 100 psi or 28.8″ Hg Vacuum. The durable Acetal plastic and anodized aluminum construction prevents body heat transfer, resulting in drift-free, accurate readings. The Series CHP is equipped with oversized check valves in order to provide smooth and controlled operation. Dual O-Rings on all pistons ensure the pump to be leak-free. The unit includes a 2 foot long hose, 1/8″ female NPT gage fitting, and 1/8″ NPT pipe plug. An optional hose kit is available so that a tee is not required when connecting a sensor and a calibrator. The Series CHP is ideal for checking calibration of pressure or vacuum gages, switches, or transmitters.

Additional Information:

Item Code: Series-CHP

S Type Stainless Steel Pitot Tube

Rs 4,750 / Piece

Application	Industrial
Model	Series-160S
Temperature	1500 Degree F (815.5 Degree C)
Pressure Connection	100 psig (6.89 bar)
Material	304 SS.
Brand	Dwyer USA
Applications	Monitor or control air velocity or air flow in particulate laden air streams

S Type Stainless Steel Pitot Tube

The Series 160S “S” Type Stainless Steel Pitot Tube is designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in smoke stack and other environmental testing. Total and static pressure tubes are precisely aligned and welded together every 6 inches for maximum accuracy, strength, and long term durability. Permanent mount (PM) models include a 1″ welded stainless steel sleeve and adjustable compression fitting with 1″ MNPT mounting threads.

Applications:

Monitor or control air velocity or air flow in particulate laden air strea

Additional Information:

Item Code: Series-160S

Straight Stainless Steel Pitot Tubes

Rs 4,500 / Piece

Weight	4.3 oz (122 g).
Brand	DWYER USA
Application	Industrial
Temperature	1500 Degree F (815 Degree C).
Model	Series-160F
Material	304 SS.
Accuracy	+/-2% FS, 0 to 9000 FPM (45 M/s).
K Factor	0.81
Max Temperature	1500 Degree F (815 Degree C).
Process Connections	1/4″ OD.
Applications	Monitor or control air velocity or air flow when combined with differential pressure gage, switch, o

Straight Stainless Steel Pitot Tubes

The SERIES 160F Straight Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The straight design allows for easy insertion into ducts through grills and pressure taps, as well as aids in positioning in hard to reach locations where a hook style Pitot tube may not allow access.

Features:

Straight design allows for easy insertion into ducts
Permanent stamped insertion depth graduations facilitate accurate positioning
Alignment indicator helps keep tip parallel to flow

Applications:

Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter where hook style Pitot tubes don’t allow access

Additional Information:

Item Code: Series-160F

Telescoping Stainless Steel Pitot Tube

Rs 5,500 / Piece

Tube Diameter	3.2 mm
Brand	Dwyer Usa
Model	Model-166T
Weight	1 lb, 9 oz (709 g)
Application	Industrial
Diameter	3.2 mm
Largest section	3/8″ (9.5 mm)
Case Size	12.5 x 6.25 x 1.75 in.
Applications	Monitor or control air velocity or air flow when combined with differential pressure gage, switch, o

Telescoping Stainless Steel Pitot Tube

The Model 166T Telescoping Pitot Tube is a unique air flow sensor which can quickly and easily be adjusted for any duct insertion length from 11.5 to 36 inches (29.2 to 91.4 cm). Now, this single compact unit can replace up to five conventional fixed length Pitot tubes. For even greater convenience, it is securely protected by a custom fitted polyethylene carrying case. Telescoping sections lock in place as they are extended, enabling use of the handle grip to gage proper alignment of the tip within the airstream. Stainless steel construction resists corrosion. Hemispherical tip has 1.0 flow coefficient, is 1/8″

Features:

Adjustable length can replace up to 5 fixed length Pitot tubes
Stainless steel construction resists corrosion
1.8″ diameter hemispherical tip has 1.0 flow coefficient

Applications:

Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter where varying lengths are needed

Additional Information:

Item Code: Model-166T

Thermo Anemometer Probe

Rs 20,000 / Piece

Brand	DWYER USA
Item Code	Series-AP1
Model Number	Series-AP1
Condition	New
Process Temperature	-20 to 212 Degree F (-29 to 100 Degree C)
Ambient Temperature	5 to 125 Degree F (-15 to 51 Degree C).
Response Time	1 S

Thermo Anemometer Probe

Series AP1, Wired Thermo-Anemometer Probes for the Model 471B.

Specification:

Range : Air Velocity: 0 to 6000 FPM (0 to 30 m/s); Volumetric Air: 999,999 in selected flow units; Temperature: -20 to 212°F (-29 to 100°C).
Accuracy : Air Velocity: ±3% FS within temperature range of 40 to 90°F (4 to 32°C); Temperature: ±0.5°F (±0.28°C).

Other Details:

Model	Description
AP1	Thermo anemometer air velocity & temperature probe with coiled cable, 8″ insertion length
AP1-18	Thermo anemometer air velocity & temperature probe with coiled cable, 18″ insertion length
AP1-24	Thermo anemometer air velocity & temperature probe with coiled cable, 24″ insertion length
AP1-36	Thermo anemometer air velocity & temperature probe with coiled cable, 36″ insertion length

Additional Information:

Item Code: Series-AP1

Thermo Anemometer Test Instument

Rs 65,000 / Piece

Model Number	16 oz (454 g).
Condition	New
Usage/Application	Duct traverses
Brand	DWYER USA
Application/Usage	HVAC inspections
Applications	Testing and balancing
Display	4.5 digit LCD
Resolution	0.1%, 0.1 Degree F/Degree C.
Range Volumetric Air Flow	19999 in selected flow units.
Probe Length	8″ (203 mm) insertion.
Cable Length	28″ (71 cm) retracted, 6 ft (183 cm) extended.
Weight	16 oz (454 g).

Thermo Anemometer Test Instument

The MODEL 471B Thermo-Anemometer Test Instrument is a versatile dual function unit that quickly and easily measures air velocity or volumetric flow as well as air temperature in imperial or metric units. A stainless steel probe is included, which has a comfortable hand grip and etched insertion depth marks. The extruded aluminum housing fully protects electronics, yet is lightweight and comfortable to hold.

Features:

Compatible with Dwyer RP1 thermo-hygrometer and VP1 100 mm vane thermo-anemometer probes (sold separately)
High contrast and backlit LCD for visibility in any condition
Able to store up to 99 readings
Integral sliding cover protects probe sensors when not in use
Built-in volumetric air flow calculations

Specification:

Service : Air velocity and temperature of clean, dry air.
Temperature Limits : Process Air Velocity: -20 to 212°F (-29 to 100°C); Process Temperature: -40 to 212°F (-40 to 100°C); Ambient: 5 to 125°F (-15 to 51°C).
Range Air Velocity : 0 to 6000 FPM (0 to 30 m/s). -TAB option: 50 to 3900 FPM (0.25 to 20m/s).
Accuracy Air Velocity : ±3% FS within temperature range of 40 to 90°F (4 to 32°C). -TAB option: ±5% of reading, not less than ±1.6 FPM (0.5 m).
Range Temperature : -40 to 212°F (-40 to 100°C).
Accuracy Temperature : ±0.5°F (±0.28°C) from 32 to 122°F (0 to 50 °C); ±1.5°F (±0.83°C) from -40°F to 32°F (-40 to 0°C) & 122 to 212°F (50 to 100°C).
Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.

Applications:

Duct traverses
HVAC inspections
Testing and balancing

Additional Information:

Item Code: Model-471B

Thermo Hygrometer Probe

Rs 14,500 / Piece

Brand	Dwyer USA
Application	Industrial
Item Code	Model-RP1
Model	Model-RP1
Weight	12.8 oz (362 g).
Process Temperature	-40 to 176 Degree F (-40 to 100 Degree C).
Ambient Temperature	5 to 125 Degree F (-15 to 51 Degree C)
Range	RH 0 to 100% (non-condensing); Temperature -20 to 140 Degree F (-29 to 60 Degree C).
Response Time	1.5 S
Probe Length	8″ (203 mm) insertion.

Thermo Hygrometer Probe

Model RP1, Wired Thermo-Hygrometer Probe for the Model 485B.

Specification:

Accuracy : RH: ±2% @ 25°C (10 to 90% RH); ±4% (0 to 10, 90 to 100% RH); Temperature: ±0.54 @ 77°F (±0.3 @ 25°C).

Additional Information:

Item Code: Model-RP1

Vane Thermo-Anemometer Test Instrument

Rs 4,500 / Piece

Item Code	Model-473B
Model Number	Model-473B
Application/Usage	Residential balancing
Brand	DWYER USA
Usage/Application	HVAC inspections
Material	Anodized aluminum.
Condition	New
Display Type	4.5 digit backlit display.
Process Temperature	-20 to 212 Degree F (-29 to 100 Degree C)
Ambient Temperature	5 to 125 Degree F (-15 to 51 Degree C)
Probe Length	8″ (203 mm) insertion.
Cable Length	28″ (71 cm) retracted; 6′ (183 cm) extended.
Vane Material	Anodized aluminum.

Vane Thermo Anemometer Test InstrumentThe MODEL 473B 100 mm Vane Thermo-Anemometer Test Instrument is a versatile unit that quickly and easily measures air velocity or volumetric air flow, as well as air temperature and humidity in imperial or metric units. A stainless steel 100 mm vane probe is included, which has a comfortable hand grip. The extruded aluminum housing fully protects electronics, yet is lightweight and comfortable to hold.

Features:

Compatible with Dwyer AP1 thermo-anemometer and RP1 thermo-hygrometer wired probes (sold separately)
Included 100 mm vane probe is able to measure air velocity, volumetric air flow, temperature, and humidity
High contrast and backlit LCD for visibility in any condition
Able to store up to 99 readings for later evaluation

Specification:

Range : Air Velocity: 40 to 5000 fpm (0.2 to 25 m/s); Volumetric Air Flow: 19,999 in selected flow units; Temperature: -20 to 212°F (-29 to 100°C); Relative Humidity: 0 to 100% RH.
Accuracy : Air Velocity: ±1.5% of reading ±20 fpm (±0.1 m/s) [0.25 to 10 m/s]; ±1.5% of reading ±40 fpm (±0.2 m/s) [10 to 20 m/s]; ±1.5% of reading ±60 fpm (±0.3 m/s) [20 to 25 m/s]; Temperature: ±0.54°F @ 77°F (±0.3°C @ 25°C); Relative Humidity: ±2% @ 77°F (25°C) [10 to 90% RH]; ±4% [0 to 10, 90 to 100% RH].
Response Time : Air Velocity: 1 s; Volumetric Air Flow: 1 s; Temperature: 1.5 s; Relative Humidity: 1.5 s.
Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.

Applications:

Residential balancing
HVAC inspections

Additional Information:

Item Code: Model-473B

Wireless Wi Fi Data Logger

Rs 15,000 / Piece

Model Number	Series-DW-WIFI
Application/Usage	Weather monitoring
Condition	New
Item Code	Series-DW-WIFI
Usage/Application	Environment monitoring
Brand	DWYER USA
Sampling Rate	Selectable from 10 s to 12 hrs.
Transmission Rate	Selectable from 1 min to 24 hrs.
Interface	Wi-Fi connection.
Temperature Range	-4 to 140 Degree F (-20 to 60 Degree C).
Weight	7.2 oz (204 g).

Wireless Wi Fi Data Logger

The Series DW-WIFI Wireless Wi-Fi Data Logger measures and records up to 1,000,000 temperature and/or humidity readings and shares the data with any PC or server on the same Wi-Fi network. If the Wi-Fi connection is lost, the sensor will continue to store any records until it can regain communication with the network. The downloadable Windows® based software allows users to set high/low alarms, sampling rate, and the temperature scale.

Features:

Continues to record values even if Wi-Fi connection is lost
Able to record up to 1,000,000 data points, which can be downloaded to a PC
Large LCD allows users to view data directly from unit

Specification:

Memory Size : 1,000,000 readings; 500,000 each for DW-WIFI-TH(-HA).
Sampling Mode : Continuous recording.
Power Requirements : 3.7 V lithium ion battery, installed functional, factory replaceable (cable for charging included).
Alarms : Programmable high/low.
Probe Length : DW-WIFI-TP: 11.8″ (30 cm); DW-WIFI-TC: 59″ (150 cm).

Applications:

Environment monitoring
Weather monitoring
Building/site monitoring

Other Details:

Model	Description
DW-WIFI-T	Wireless Wi-Fi Data Logger with integral temperature sensor
DW-WIFI-TC	Wireless Wi-Fi Data Logger with remote thermocouple probe (probe included, but not shown)
DW-WIFI-TH	Wireless Wi-Fi Data Logger with integral temperature and humidity sensor
DW-WIFI-T-HA	High Accuracy Wireless Wi-Fi Data Logger with integral temperature sensor
DW-WIFI-TH-HA	High Accuracy Wireless Wi-Fi Data Logger with integral temperature and humidity sensor
DW-WIFI-TP	Wireless Wi-Fi Data Logger with remote temperature probe
DW-WIFI-TP-HA	High Accuracy Wireless Wi-Fi Data Logger with remote temperature probe

Additional Information:

Item Code: Series-DW-WIFI

Temperature Controller Wholesale Dealers in India

Elementor #2115

Oct 13, 2021 by admin 0 Comments

General Purpose RTD

Rs 300 / Piece

Model	Series-4
Warranty	YAS
Brand	DWYER USA
Condition	New
Size	1/2″ NPT, or 3/4″ NPT
Tip Temperature	450 Degree C (842 Degree F)

General Purpose RTD

General Purpose RTD’s are low cost and offered in a variety of configurations. Tip temperatures can be as high as 450°C (842°F) for fiberglass insulated wire, or 200°C (392°F) for FEP insulated wire. Models specified with a head cover can be ordered with no process connection, 1/2″ NPT, or 3/4″ NPT process connections. For higher temperatures, see Series R Mineral Insulated RTDs.

Other Details:

Model	Description
122087-00	FEP insulation extension 100ΩRTD, 6″ length, #6 spade terminal.
122087-01	FEP insulation extension 100ΩRTD, 12″ length, #6 spade terminal.
122087-02	FEP insulation extension 100ΩRTD, 18″ length, #6 spade terminal.
122095-04	General purpose (3-wire) 100ΩRTD with #6 spade terminals.
122095-14	Rigid extension 100ΩRTD, 24″ length, open terminal.
122095-17	Flex hose extension 100ΩRTD, 0° bend, #6 spade terminal.
122095-25	Stainless steel overbraid extension 100ΩRTD, 0° bend, #6 spade terminal.

Additional Information:

Item Code: Series-4

1/16 Din Temperature And Process Controller

Rs 5,500 / Piece

Condition	New
Weight	4 oz (114 g).
Applications	Food service equipment.
Brand	DWYER USA
Model Number	Series-16B
Usage/Application	Medical equipment
Application	Environmental chambers.
Display Type	Two 4-digit, 7 segment .25″ H (6.35 mm) LED’s. PV red; SV green.
Accuracy	+/-0.25% span, +/-1 least significant digit.
Supply Voltage	100 to 240 VAC, 50/60 Hz or 24 VDC (depending on model)
Operating Temperature	32 to 122 Degree F (0 to 50 Degree C).
Front Panel Rating	IP56
Power Consumption	5 VA max.

1/16 Din Temperature And Process Controller

Monitor and control temperature or process applications with precision using the Series 16B controllers. The units offer two separate outputs for dual loop control in direct or reverse acting. Select relay, voltage, or current output combined with a second relay output.

The Series 16B provides dual LED displays for local indication of process value and setpoint value. Output status, engineering scale, auto tuning and alarm status is also indicated on the front panel.

Control methods include ON/OFF, PID, self-tune and manual tune. PID control is supported with 64 ramp/soak control actions. Two additional alarm outputs are standard on the Series 16B. The alarm outputs can be quickly configured by using the thirteen built-in alarm functions.

The controller easily communicates with other external devices such as PC’s and PLC’s for data search and system integration using the built-in RS-485 interface. Up to 247 communication addresses are available with transmission speeds of 2400 to 38,400 bps. The Series 16B also features universal input, selectable °F/°C, selectable resolution and security functions.

Features:

Universal input accepts process transmitters, RTD’s or thermocouple signals
On/off, PID, or manual output control
RS-485 standard on all models
Stage control program for up to 64 ramp/soak actions

Specification:

Inputs : Thermocouple, RTD, DC voltages or DC current.
Memory Backup : Nonvolatile memory.
Control Output Ratings : Relay: SPST, 5 A @ 250 VAC resistive; Voltage Pulse: 14 V, 10% to -20% (max 40 mA); Current: 4 to 20 mA.
Communication : RS-485 Modbus® A-5-11/RTU communication protocol.

Applications:

Control temperature for boilers, damper control based on temperature or pressure.
Hot plates/melt pots.
Packaging equipment.
Environmental chambers.
Medical equipment.
Food service equipment.

Additional Information:

Item Code: Series-16B

1/4 DIN Temperature and Process Controller

Rs 5,500 / Piece

Condition	New
Model No	Series-4B
Item Code	Series-4B
Make	DWYER USA
Usage/Application	Control temperature for boilers, damper control based on temperature or pressure
Brand	DWYER USA
Weight	15 oz (425 g).
Supply Voltage	100 to 240 VAC, 50/60 Hz.
Power Consumption	5 VA max.
Operating Temperature	32 to 122 Degree F (0 to 50 Degree C).
Front Panel Rating	IP56

1/4 DIN Temperature and Process Controller

The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay.

The units can be programmed for ON/OFF, PID, auto-tuning, or manual tuning control methods. The PID control is supported by 64 ramp/soak actions. The Series 4B also includes two additional alarm outputs. The second relay output can be reconfigured as a third alarm output. The alarm type can be selected from 13 different preprogrammed alarm functions. The controller features dual LED displays for local indication of process and setpoint values.

Features:

Universal input accepts process transmitters, RTD’s or thermocouple signals
On/off, PID, or manual output control
RS-485 standard on all models
Stage control program for up to 64 ramp/soak actions

Specification:

Inputs : Thermocouple, RTD, DC voltages or DC current.
Display : Two 4-digit, 7 segment. PV: 3/4″ H (19 mm) red; SV: 1/2″ H (12.7 mm) green.
Accuracy : ±0.25% span, ±1 least significant digit.
Memory Backup : Nonvolatile memory.
Control Output Ratings : Relay: SPDT, 5 A @ 250 VAC resistive; Voltage Pulse: 14 V, 10% to -20% (max 40 mA); Current: 4 to 20 mA; Linear Voltage: 0-10 V.
Communication : RS-485 Modbus® A-5-11/RTU communication protocol.

Applications:

Control temperature for boilers, damper control based on temperature or pressure.
Hot plates/melt pots.
Packaging equipment.
Environmental chambers.
Medical equipment.
Food service equipment.

Additional Information:

Item Code: Series-4B

Bimetal Thermometer

Rs 1,500 / Piece

Usage/Application	Treatment plant temperature monitoring
Brand	DWYER USA
Model No.	Series-BT
Accuracy	+/-2% FS.
Application	Chiller or boiler water temperature monitoring
Wetted Materials	304 SS.
Housing Material	Series 300 SS.
Lens	Glass
Stem Diameter	1/4″ O.D.
Response Time	40 seconds.

Bimetal Thermometer

The SERIES BT Bimetal Thermometersoffer accurate, reliable service even in the toughest environments. These corrosion resistant units are constructed from stainless steel and are hermetically sealed to prevent crystal fogging. The bimetal element directly drives pointer, eliminating gears and linkage. An external reset screw allows field calibration and easy-to-read aluminum dial minimizes parallax error. Choose back connection, lower connection or adjustable angle for easy viewing and installation. Adjustable models can be rotated a full 360° and tilted over a 180° arc. NOTE: When using in pressurized applications, use a suitable thermowell.

Features:

Hermetically sealed
Adjustable dial position models

Specification:

Temperature Limits : Head: 200°F (93°C); Stem: Not to exceed 50% over-range or 1000°F (538°C) or 800°F (427°C) continuously.
Process Connection : 1/4″ NPT on 2″ dial size; 1/2″ NPT on 3″ or 5″ dial size.
Immersion Depth : Minimum 2″ in liquids, 4″ in gas.

Applications:

Chiller or boiler water temperature monitoring
Treatment plant temperature monitoring

Request
Callback

Additional Information:

Item Code: Series-BT

DIN Rail Temperature and Process Controller

Rs 7,500 / Piece

Memory Backup	Non-volatile.
Brand	DWYER USA
Usage/Application	Oven, boiler, or chiller control
Power Consumption	3 W.
Model Number	Series-SCD
Weight	2.7 oz (76.5 g).
Item Code	Series-SCD
Supply Voltage	24 VDC
Operating Temperature	32 to 122 Degree F (0 to 50 Degree C).

DIN Rail Temperature and Process Controller

The DIN Rail Mount SERIES SCD offers multiple PID loops in a compact size. Each SCD-1000 master controller can be combined with up to seven SCD-2000 slave controllers without any wires. Each controller has one universal input, one relay output and one user selected output.

Features:

Expandable from 1 to 8 process control loops
Universal transmitter or temperature sensor inputs
RS-485 Modbus® communication
Dual loop or single loop/alarm output control

Specification:

Control Output Ratings : Relay: 3 A @ 250 VAC resistive; Voltage pulse: 12 VDC, max. output current: 40 mA; Current: 4 to 20 mA output; Linear voltage: 0 to 10 VDC.
Communication : RS-485 Modbus® A-5-11/RTU communication protocol.

Applications:

Oven, boiler, or chiller control
Hot plates/melt pots
Packaging equipment
Environmental chambers
Medical equipment
Food service equipment

Other Details:

Model	Description
SCD-1023	DIN rail temperature/process master controller, (1) voltage pulse output and (1) relay output.
SCD-1033	DIN rail temperature/process master controller, (2) relay outputs.
SCD-1053	DIN rail temperature/process master controller, (1) current output and (1) relay output.
SCD-1063	DIN rail temperature/process master controller, (1) linear voltage output and (1) relay output.
SCD-2023	DIN rail temperature/process slave controller, (1) voltage pulse output and (1) relay output.
SCD-2033	DIN rail temperature/process slave controller, (2) relay outputs.
SCD-2053	DIN rail temperature/process slave controller, (1) current output and (1) relay output.
SCD-2063	DIN rail temperature/process slave controller, (1) linear voltage output and (1) relay output.

Additional Information:

Item Code: Series-SCD

Digital Solar Powered Bimetal Thermometer

Rs 5,200 / Piece

Condition	New
Application	Commercial
Usage	Commercial
Weight	12 oz (350 g).
Usage/Application	Boiler or chiller temperature monitoring
Model	Series-DBT
Response Time	15 seconds.
Accuracy	32 to 122 Degree F (0 to 50 Degree C) +/-1% FS.
Display	3-1/2 digit LCD.
Wetted Materials	304 SS.
Housing Material	300 SS
Lens	Acrylic
Dial Size	3″.
Process Connection	1/2″ NPT, adjustable angle.
Supply Power	3-volt solar cell (minimum 35 LUX required).

Digital Solar Powered Bimetal Thermometer

The SERIES DBT Digital Solar-Powered Bimetal Thermometer takes the guesswork out of temperature measurement. The 3-1/2 digit LED display is easy to read and provides resolution to 0.1°F. The adjustable angle can be mounted in virtually any position. The engineering units can be selected in the field by removing the back cover.

Features:

Field selectable °F or °C temperature units
0.1° resolution
Adjustable dial position

Applications:

Boiler or chiller temperature monitoring
HVAC duct monitoring

Additional Information:

Item Code: Series-DBT

Digital Temperature Switch

Rs 3,500 / Piece

Application	Commercial
Weight	2.3 oz (65 g).
Resolution	1 Degree
Brand	Dwyer Usa
Usage/Application	Industrial
Storage Temperature	-4 to 176 Degree F (-20 to 80 Degree C).
Display Range	3-digit, red, 1/2″ digits.
Model	Series-TS2
Accuracy	+/-1% of FS.
Condition	New
Probe Range	-58 to 302 Degree F (-50 to 150 Degree C).
Horsepower Rating	1 HP.
Power Requirement	115 VAC, 230 VAC, 12 VAC/VDC, or 24 VAC/VDC.
Ambient Temperature	32 to 158 Degree F (0 to 70 Degree C).
Front Panel Rating	IP64

Digital Temperature Switch

Monitor and control temperature for heating and cooling applications with the Series TS2 Digital Temperature Switch. The Series TS2 offers twelve programmable functions to customize the unit to fit application requirements. Use the 15(5) Amp SPDT relay output to drive a motor, compressor, or fan. Designed with the OEM in mind, the TS2 offers the ability to configure multiple units with the touch of a button.

Programming multiple units is quick and easy. Simply program one switch with the desired parameter settings and connect the configuration key (sold separately) to the back of the unit. Press the button on the configuration key and download the parameter settings. Connect the key to the other switches to upload the stored settings with the push of a button.

The TS2 features set point adjustments, static defrost timing, compressor mean time, hysteresis, and ambient probe adjustment. Security protection is offered using a password code. The Series TS2 Digital Temperature Switches are designed to operate with PTC (1000Ω @ 25°C) probes sold separately.

Features:

Simple to use temperature control device
Configuration key
Input : PTC thermistor (1000Ω @ 25°C).
Output : 16 A SPDT relay @ 250 VAC resistive 5 A inductive..
Control Type : On/off.

Applications:

Refrigerators
Chillers
Food service equipment
Medical sterilizers or equipment

Other Details:

Model	Description
TS2-010	Digital temperature switch, 110 VAC, °F display.
TS2-011	Digital temperature switch, 110 VAC, °C display.
TS2-020	Digital temperature switch, 230 VAC, °F display.
TS2-021	Digital temperature switch, 230 VAC, °C display.
TS2-030	Digital temperature switch, 12 VAC/VDC, °F display.
TS2-040	Digital temperature switch, 24 VAC/VDC, °F display.

Additional Information:

Item Code: Series-TS2

Digital Touch Screen Programmable Thermostat with Heat Pump Control

Rs 7,500/ Piece

Resolution	1 Degree F (0.5 Degree C).
Storage Temperature	23 to 122 Degree F (-5 to 50 Degree C).
Model Number	Model-TLVT1
Brand	DWYER USA
Weight	10 oz (283.5 g).
Usage/Application	Industrial
Condition	New
Accuracy	+/-1 Degree F (0.5 Degree C).
Application	Commercial
Range	Measurement 32 to 99 Degree F (0 to 40 Degree C), Adjustment 41 to 95 Degree F (5 to 35 Degree C).
Sensor Type	NTC thermistor.
Power	(2) AA alkaline batteries, not included.
Output Power	1 A 24 VAC 50/60 Hz.
Operating Temperaure	32 to 122 Degree F (0 to 50 Degree C)

Digital Touch Screen Programmable Thermostat with Heat Pump Control

The MODEL TLVT1 Digital Touch Screen Programmable Thermostat with Heat Pump simplifies controlling indoor temperatures in commercial and residential buildings. A large easy to read LCD display shows the current temperature, set point, as well as time and day of the week. By touching the icons on the display, building occupants can temporarily change the set point, edit the weekly program, or select the control mode. For larger offices or homes, a single thermostat can control up to two heating and two cooling units. For Heat pump applications, the thermostat can control a two stage compressor. To make programming the time easier, there is a daylight savings time function that will automatically change the time based on the US time change dates. To prevent tampering, the Model TLVT1 has a security code feature that can lock out the programming. For additional energy savings, the filter, UV and energy usage timers tracks the number of hours the fan, heater/cooler, and thermostat is powered on. Additional energy savings can be achieved by programming the thermostat for up to 4 temperature events for each day of the week.

Features:

Weekday and weekend programs; 4 events per day
Large touch LCD display
Two-stage heating and cooling control
Security code setting protection
Filter and energy use timers

Applications:

Commercial or residential indoor temperature control

Additional Information:

Item Code: Model-TLVT1

Duct And Immersion Building Automation Temperature Sensor

Rs 2,200 / Piece

Certification	YAS
Weight	5.3 oz (150.3 g).
Application	Commercial
Usage/Application	Industrial
Model	Series-TE
Brand	DWYER USA
Operating Temperature	-40 to 302 Degree F (-40 to 150 Degree C).
Condition	New
Housing Material	Meets UL, 94 V-O polycarbonate plastic.
Thermowell Material	TE-I 304 SS.
Housing Rating	NEMA 4X (IP66) (DFW, IBW only)
Cable Rating	Plenum option includes UL listed plenum cable.

Duct And Immersion Building Automation Temperature Sensor

The SERIES TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.

For variable air volume applications, the Series TE can be configured to have 8′ plenum rated cable with flying leads. Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. For housing models, multiple knockouts provide easy conduit access to any side of the housing. The 1/4 turn lid comes with a chain to prevent it from being lost during installation.

Features:

Easy to mount external tab housing and flange options for duct applications
1/4 turn housing cover with chain to prevent dropping
Multiple conduit knockouts for easy installation positioning
8´ plenum rated cable option
Terminal connector eliminates need for wire nuts
Accuracy : Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor DIN Class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).

Applications:

Building automation
VAV temperature sensing
Chiller or boiler loops
AHU monitoring

Additional Information:

Item Code: Series-TE

Explosion Proof RTD Temperature Transmitter

Rs 1,750 / Piece

Application	Commercial
Model Number	Series-TTE
Response Time	250 ms.
Condition	New
Brand	DWYER USA
Pressure	2000 psi (137.9 bar).
Usage/Application	Industrial
Temperature Sensor	Pt1000, 0.00385 DIN.
Wetted Materials	316 SS.
Process Connection	1/2″ male NPT.
Conduit Connection	1/2″ female NPT.
Probe Length	2″ to 18″
Power Requirements	10 to 35 VDC.
Output Signal	4 to 20 mA
Optional Display	2 lines X 8 character LCD.

Explosion Proof RTD Temperature Transmitter

The SERIES TTE Explosion-Proof RTD Temperature Transmitter is the ideal product for hazardous temperature measurement applications. The TTE series has seven pre-programmed temperature ranges that are selectable via an internal dip switch. For those applications that need a custom range, the transmitter can be easily configured for any range between -30 to 250°F with a minimum span of 40°F. The span and zero can be quickly adjusted with a simple push button design. The compact housing allows for the transmitter to be mounted in virtually any application.

Features:

FM approved for Class I, Groups B, C, D; Class II, Groups E, F, G classified explosive environments
Optional LCD
Output span selected from seven common ranges or user determined

Applications:

Explosive process environments
Offshore HVAC monitoring

Additional Information:

Item Code: Series-TTE

High Temperature Data Logger

Rs 3,800 / Piece

Usage	Industrial
Resolution	0.02 Degree F (0.01 Degree C).
Battery Life	1 year (approx).
Weight	4.2 oz (120 g).
Temperature Range	-4 to 284 Degree F (-20 to 140 Degree C).
Usage/Application	Thermal testing
Model	Series-HTDL-20-30
Brand	Dwyer USA
Range	-328 to 50 Degree F (-200 to 260 Degree C).
Memory Size	32700 Readings.
Sampling Rate	Selectable from 1 s. to 24 hrs.
Housing Material	316 SS.

High Temperature Data Logger

The Model HTDL-20/30 is a high temperature data logger that can measure temperatures up to 500°F (260°C) and record up to 32,700 measurements.
Features:Submersible and portableTemperature measurement up to 500°FRemote probe option for chamber or oven loggingDelay startup timer

Specification:Accuracy : 0.18°F (0.1°C) @ 68 to 284°F (20 to 140°C); 0.54°F (0.3°C) @ -4 to 67.98°F (-20 to 19.99°C).Sampling Method : Stop on memory full or continuous recording.Computer Requirements : Windows® Xp Sp3, Windows Vista®, Windows® 7 operating systems.Power Requirements : 3.6 V 1/2 AA ER14250SM lithium metal battery, installed functional, user replaceable.Interface : Docking station and USB cable.

Applications:

Thermal testingProcess monitoring or troubleshooting
Other Details:Model DescriptionHTDL-20 High temperature data logger with 2″ rigid probe.HTDL-30 High temperature data logger with 24″ flexible probe.

Additional Information:

Item Code: Series-HTDL-20-30

Immersion Temperature Sensors

Rs 2,000 / Piece

Weight	5.3 oz (150.3 g).
Warranty	5 year
Condition	New
Applications	Building automation
Usage/Application	Chiller or boiler loops
Place Of Origin	DELHI
Brand	DWYER USA
Operating Temperaure	-40 to 302 Degree F (-40 to 150 Degree C).
Housing Material	Meets UL, 94 V-O polycarbonate plastic.
Thermowell Material	304 SS.
Thermowell Connection	Internal = 1/2″ NPSM; External = 1/2″ NPT.

Immersion Temperature Sensors

The SERIES TE-I Immersion Style Temperature Sensors accurately measure water temperature inside chilled and hot water loops in HVAC systems. Thermowells are required to protect the electrical connection from the process water and to allow replacement of the sensors without draining the system.

Features:

1/4 turn housing cover with chain to prevent dropping
Multiple conduit knockouts for easy installation positioning
Integral 1/2″ NPSM connection for direct mounting to a thermowell
General purpose or weatherproof enclosure options
Terminal connection eliminates need for wire nutsAccuracy : Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor DIN Class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).

Applications:

Chiller or boiler loops
Building automation

Other Details:

Model	Description
TE-TNS-N043N-00	Thermowell, 304SS, 4″ insertion length.
TE-TNS-N063N-00	Thermowell, 304SS, 6″ insertion length.
TE-TNS-N083N-00	Thermowell, 304SS, 8″ insertion length.
TE-TNS-N123N-00	Thermowell, 304SS, 12″ insertion length.
TE-TNS-N183N-00	Thermowell, 304SS, 18″ insertion length.
TE-TNS-N253N-00	Thermowell, 304SS, 2.5″ insertion length.

Additional Information:

Item Code: Series-TE-I

Industrial Thermometer

Rs 1,750 / Piece

Condition	NEW
Model	Series-IT
Brand	Dwyer Usa
Weight	1 lb 7 oz (0.65 kg).
Wetted Material	Tapered cast aluminum with graphite fill.
Housing Material	Aluminum
Lens	Glass
Process Connection	1-1/4-18 NEF thread.
Liquid Filling	Organic blue liquid filled tube

Industrial Thermometer

The Series IT Industrial Thermometer allows users to easily take accurate temperature measurements in any environment. The case of the IT series is made of die cast aluminum for extra durability in industrial environments. The glass lens is easily cleaned and resists scratches for better viewing of the scale. The stem can be adjusted 180° in order to achieve the best viewing angle. The blue organic fill is non-toxic and allows users to better see the temperature reading. The scales can be ordered with dual units, °F, or °C.

Additional Information:

Item Code: Series-IT

Outdoor Temperature Sensors

Rs 2,100 / Piece

Weight	0.65 lb (295 g).
Brand	DWYER USA
Model	The Series TE-OND-TE-RND-TE-OS
Condition	New
Place Of Origin	Delhi
Operating Temperaure	-40 to 302 Degree F (-40 to 150 Degree C).
Housing Material	Polycarbonate
Enclosure Rating	TE-OND/TE-RND NEMA 4X (IP65); TE-OSA NEMA 3R (IP54)

Outdoor Temperature Sensors

The Series TE-OND/TE-RND/TE-OSA Outdoor Air Temperature Sensors are offered in two different configurations to increase measurement accuracy by reducing radiated heat effects. For applications where the north side of the building is accessible, the TE-OND/TE-OSA can be used to protect against low levels of radiated heat. If the sensor must be mounted in direct sunlight or a more precise measurement is required, our six plate radiation shield mounts over the temperature probe. The TE-RND radiation shield models can be surface or pipe mounted. All models include removeable terminal blocks to simplify wiring.

Specification:

Accuracy : Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor: DIN class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).

Pressure and Temperature Data Logger

Rs 3,500 / Piece

Brand	Dwyer Usa
Material	Stainless steel.
Condition	NEW
Battery Life	1 year (approx).
Model	Series-DLP
Usage/Application	Clean Room
Weight	12 oz (340 g).
Memory Size	16383 readings per channel.
Sampling Rate	Selectable from 2 sec to 12 hrs.
Interface	USB port (interface cable required).

Pressure and Temperature Data Logger

The Series DLP Data Logger can record pressure and temperature. The 1/4″ NPT fitting comes standard and allows the logger to be adapted to almost any pressure fitting. The internal temperature sensor provides accurate temperature measurements without the need of a separate temperature recorder, and many of the models provide a choice between measuring pressure in psia or psig. The DLP can easily be started and stopped from a PC or delayed to start up to six months in advance. The battery-powered data logger can store over 16,000 measurements per channel, and the easy to use DL700 software makes retrieving data simple.

Features:

Efficient data capture tool to review processes are running correctly or to analyze alarm and out-of-spec conditions
Battery-powered reduces need to hard wire power allowing device to be used in a as a tool in a variety of in-and-out testing
PC start and stopping allows centralized control of data collection

Specification:

Range : Temperature: -40 to 176°F (-40 to 80°C); Pressure: 0 to 30 psia(g), 0 to 100 psia(g), 0 to 300 psia(g), 0 to 500 psia(g), 0 to 1000 psia, and 0 to 5000 psia depending on the model.
Accuracy : Temperature: ±0.9°F (±0.5°C); Pressure: 2% FSR, 0.25% at 77°F (25°C) typical.
Resolution : Temperature: 0.2°F (0.1°C); Pressure: 0.002 psia(g), 0.005 psia(g), 0.05 psia(g), 0.05 psia, and 0.2 psia depending on the model.
Sampling Method : Stop on memory full.
Computer Requirements : Windows® 95, Windows® 98, Windows® 2000, Windows® ME, Windows NT®, and Windows® XP operating system, one free USB port.
Power Requirements : 3.6 V TL2150 lithium metal battery, installed functional, user replaceable.

Applications:

Building automation
Clean room
Operating rooms
Process applications
Labs
Regulated environments

Other Details:

Model	Description
DLP-A08	Pressure/temperature data logger, range 0-30 psia.
DLP-A10	Pressure/temperature data logger, range 0-100 psia.
DLP-A13	Pressure/temperature data logger, range 0-300 psia.
DLP-A14	Pressure/temperature data logger, range 0-500 psia.
DLP-A15	Pressure/temperature data logger, range 0-1000 psia.
DLP-A19	Pressure/temperature data logger, range 0-5000 psia.
DLP-G08	Pressure/temperature data logger, range 0-30 psig.
DLP-G10	Pressure/temperature data logger, range 0-100 psig.
DLP-G13	Pressure/temperature data logger, range 0-300 psig.
DLP-G14	Pressure/temperature data logger, range 0-500 psig.

Additional Information:

Item Code: Series-DLP

RHP Humidity and Temperature Transmitter

Rs 4,200 / Piece

Condition	New
Applications	Outdoor temperature and relative humidity reference
Temperature	-40 to 140 Degree F (-40 to 60 Degree C).
Weight	616 lb .3 kg
Brand	DWYER USA
Usage/Application	Pool room humidity monitoring
Storage Temperature	-40 to 176 Degree F (-40 to 80 Degree C).
Model	Series-RHP
Application	Air economizers
Humidity	0 to 100% RH.
Hysteresis	+/-1%.
Repeatability	+/-0.1% typical.

RHP Humidity and Temperature Transmitter

The Series RHP Temperature and Humidity Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display.

Features:

2%, 3%, or 5% accuracy models
Optional LCD display on duct mount models
Radiation shield option for outdoor installation in direct sunlight

Specification:

Accuracy, RH : RHP-2XXX ±2% 10 to 90% RH @ 25°C;RHP-3XXX ±3% 20 to 80% RH @ 25°C;RHP-5XXX ±5% 20 to 80% RH @ 25°C.
Accuracy, Thermistor Temp Sensor : ±0.2°C @ 25°C (±0.36°F @ 77°F).
Accuracy, RTD Temp Sensor : DIN Class B; ±0.3°C @ 0°C (±0.54°F @ 32°F).
Accuracy, Solid State Band Gap : ±0.9°F @ 77°F (±0.3°C @ 25°C).
4 to 20 mA Loop Powered Models:Power requirements: 10 to 35 VDC; Output signal: 4 to 20 mA.
0-5/10 V Output Models : Power requirements: 15 to 35 VDC or 15 to 29 VAC; Output signal: 0 to 10 V @ 5 mA max.
Solid State Band Gap Temp Sensor Output Ranges : Switch selectable, -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C).
Response Time : 15 s.
Electrical Connections : Removable screw terminal block.
Conduit Connection : Duct Mount: 1/2″ NPS; OSA: 1/2″ (22.3 mm).
Drift : <1% RH/year.
RH Sensor : Capacitance polymer.
Temperature Sensor : >Types 1, 2, 3: Solid state band gap; Curves A,B,C; Thermistor; Curves D,E; Platinum RTD DIN 385.
Enclosure : Duct Mount: PBT; OSA: Polycarbonate.
Enclosure Rating : Duct mount: NEMA 4X (IP66) for housing only; OSA: NEMA 4X (IP66).
Display : Duct Mount only, optional 2-line alpha numeric, 8 characters/line.
Display Resolution : RH: 0.1%; 0.1°F (0.1°C).
Weight : Duct Mount: .616 lb (.3 kg) OSA: 1 lb (.45 kg).

Applications:

Air economizers
Outdoor temperature and relative humidity reference
Pool room humidity monitoring

Additional Information:

Item Code: Series-RHP

RS-485 Serial Communications Module

Rs 30,000 / Piece

Application	Refrigerated cabinets
Condition	New
Model Number	Model-TS485
Applications	Walk in coolers
Usage/Application	Food service equipment
Place Of Origin	DELHI
Brand	DWYER USA
Minimum Order Quantity	1 Unit
Compatible Devices	TS3, TSX3, TCS, TS2, TSS2, and TSW.
Communication Type	RS-485 full duplex.
Electrical Isolation	2500 VAC.

RS-485 Serial Communications Module

The MODEL TS485 Serial Communications Module allows users to read the current temperature and parameter settings of the Love Controls family of temperature switches. The configuration key port on the temperature switch provides the data signal and power for the RS-485 module. For applications with multiple temperature switches, the modules can be daisy chained together so that only two wires need to be brought to the PC. The Model TS485 is compatible with Series TS3, TSX3, TCS, TS2, TSS2, TSW.

Features:

Field configurable RS-485 communication

Applications:

Refrigerated cabinets
Walk in coolers
Food service equipment
Medical sterilizers or equipment
Wood or pellet boilers
Brewing systems

Additional Information:

Item Code: Model-TS485

Resistance Temperature Detector

Rs 650 / Piece

Temperature Range	-328 to 1202 Degree F (-200 to 650 Degree C).
Sensor Type	Wire wound, 100
Application	Air ducts
Applications	Bearing temperature
Place Of Origin	DELHI
Condition	New
Brand	DWYER USA
Model Number	Series-RTD
Usage/Application	Oil temperature indicator
Pressure	250 psig (17.2 bar).
Probe Material	316 SS.
Extension Length	30″ (76 cm).
Standard	DIN .00385 (Class B, 0.12%).

Resistance Temperature Detector

Precision SERIES RTD (Resistance Temperature Detector) offers excellent accuracy and stability over a wide temperature range. Industry standard 3-wire 100 ohm (DIN) probes are available in 6″ (15 cm), 12″ (30.5 cm) or 18″ (46 cm) sheath lengths with 30″ (76 cm) extension cable and spade lug terminals.

Features:

304 stainless steel sheath
High temperature rating

Applications:

Air ducts
Bearing temperature
Oil temperature indicator
Soldering equipment
Ovens
Environmental test chambers
Pharmaceutical manufacturing
Food processing
Plastic molding
Petroleum & chemical processing
Electric generating plants

Additional Information:

Item Code: Series-RTD

Side Reading Bimetal Thermometer

Rs 1,200 / Piece

Resolution	2% of scale.
Accuracy	+/-2% FS.
Place Of Origin	DELHI
Weight	9.2 oz (260 g).
Usage/Application	Tank or vessel monitoring
Brand	DWYER USA
Model	Series-BTL
Condition	New
Wetted Materials	304 SS.
Lens	Glass
Ambient Temperature	-40 to 392 Degree F (-40 to 200 Degree C).
Dial Size	3″.
Process Connection	1/2″ NPT.

Side Reading Bimetal Thermometer

The SERIES BTL Side Reading Bimetal Thermometers are a great fit for tight, compact areas. These horizontally mounted thermometers face upright to allow quick and easy measurements.

Features:

Dial face positioned for horizontal mounting
Scratch resistant lens

Applications:

Tank or vessel monitoring

Additional Information:

Item Code: Series-BTL

Temperature Switches

Rs 4,500 / Piece

Weight	5 lb (2.3 kg).
Condition	New
Model	Series-DA-7035N
Usage/Application	Mechanical process temperature monitoring
Brand	Dwyer Usa
Place Of Origin	DELHI
Wetted Materials	Bulb and connection 304 SS
Ambient Operating Temperature	180 Degree F (82 Degree C).
Pressure Limit	300 psi (20.6 bar).
Repeatability	+/-1% of FS.

Temperature Switches

The SERIES DA-7035N Temperature Switches include the same time-proven switching mechanism used in our Series DA pressure switches. Bourdon tube ensures high sensitivity and long life. Fully adjustable deadband makes units suitable for a wide range of control applications. Visible, calibrated dial and external adjustments make changing set points simple and fast.

Feature:s

Adjustable deadband
Snap action switch standard
Inert gas activated Bourdon tube
No cross ambient temperature effects
No bulb elevation correction required
Visible dial calibrated in both °F and °C
Visible on/off indication

Specification:

Service : Compatible liquids or gases.
Enclosure Rating : General purpose. Optional weatherproof and explosion-proof.
Switch Type : SPDT snap switch. Optional DPDT snap and a variety of mercury switches.
Electrical Rating : 10 A @ 120/240/480 VAC.
Electrical Connections : Screw terminal.
Conduit Connection : 7/8″ (22.23 mm) hole for 1/2″ (12.7 mm) conduit hub.
Process Connection : 3/4″ male NPT. Other sizes available.
Mounting Orientation : Vertical and level.
Set Point Adjustment : External knobs for set point and reset point.
Deadband : Adjustable from minimum in model chart to full range. Optional low fixed deadband.
Capillary : 6′ (1.8 m) standard. Ranges 1N – 7N, and 10N: copper. Ranges 8N, 9N, 11N: 304 SS.
Set Point Scale : Indication in °F and °C.
Options : See switch type, see enclosures, fixed deadband, longer or shorter capillary, armored capillary, wells, two stage, 1/2″ or 1″ connection sizes, manual reset.

Applications:

Mechanical process temperature monitoring

Other Details:

Model	Description
DA-7035-153-10N	Temperature switch, range 100-300°F (40-150°C), max. temp. 500°F (260°C), min. deadband 50°F (28°C).
DA-7035-153-11N	Temperature switch, range 100-500°F (40-260°C), max. temp. 600°F (315°C), min. deadband 100°F (56°C).
DA-7035-153-1N	Temperature switch, range -60 to 30°F (-50 to 0°C), max. temp. 150°F (65°C), min. deadband 23°F (13°C).
DA-7035-153-3N	Temperature switch, range 0-100°F (-50 to 0°C), max. temp. 240°F (115°C), min. deadband 25°F (14°C).
DA-7035-153-4N	Temperature switch, range 50-150°F (10-65°C), max. temp. 250°F (120°C), min. deadband 25°F (14°C).
DA-7035-153-5N	Temperature switch, range 100-200°F (40-95°C), max. temp. 300°F (150°C), min. deadband 25°F (14°C).
DA-7035-153-7N	Temperature switch, range 140-300°F (60-150°C), max. temp. 500°F (260°C), min. deadband 41°F (23°C).
DA-7035-153-8N	Temperature switch, range 250-415°F (120-215°C), max. temp. 550°F (260°C), min. deadband 42°F (23°C).
DA-7035-153-9N	Temperature switch, range 350-550°F (175-290°C), max. temp. 600°F (315°C), min. deadband 50°F (28°C).

Additional Information:

Item Code: Series-DA-7035N

Temperature Transmitter

Rs 4,200 / Piece

Applications	HVAC system monitoring
Model	Series-650
Place Of Origin	DELHI
Accuracy	+/-0.3% FS 20 Degree C (68 Degree F).
Usage/Application	HVAC system monitoring
Power Requirement	12 to 35 volts DC.
Condition	New
Brand	DWYER USA
Output Signal	4 to 20 mA DC.
Linearity	Within 0.25% of span.
Probe Construction	6″ long, 0.25″ O.D. Type 304 SS.
Ambient Operating Temperature	0 to 70 Degree C (32 to 158 Degree F).

Temperature Transmitter

The SERIES 650 Temperature Transmitter is ideal for a wide variety of HVAC, industrial and commercial multi-point temperature monitoring applications. Non-polarized terminals simplify connection to any 12-35 VDC power supply. Capable of operation with long cable runs, Series 650 Transmitters are well suited for monitoring air or water temperatures at remote locations. Three models are stocked in popular ranges factory calibrated within 0.3% of span. All are linear within 0.25% of span and may be recalibrated within low range and span limits shown on Catalog page. Low range is temperature corresponding to 4 mA output. Span is temperature difference between Low and High ranges corresponding to 4-20 mA output signal.

Features:

Field adjustable span
Low profile transmitter housing
Non-polarized wiring

Specification:

Thermal Drift : Less than 0.5% of span over ambient temperature range of 0 to 50°C (32 to 122°F).
Temperature Limits (Probe) : 204°C (400°F).
Probe Cable Length : 7 ft (2.1 m).
Voltage Stability : Output error less than 0.01% of span over the specified supply voltage range.

Applications:

HVAC system monitoring

Other Details:

Model	Description
650-1	Temperature transmitter, stocked range -23° to +10°C, low range limits: min. -32°C & max. -14°C, span limits: min. 24°C & max. 48°C.
650-2	Temperature transmitter, stocked range -7° to +49°C, low range limits: min. -12°C & max. +6°C, span limits: min. 37°C & max. 150°C.
650-3	Temperature transmitter, stocked range 0° to +100°C, low range limits: min. -12°C & max. +6°C, span limits: min. 37°C & max. 150°C.

Additional Information:

Item Code: Series-650

Temperature Transmitter

Rs 4,200 / Piece

Condition	New
Usage	Process applications where a 4 to 20 mA signal is required
Place Of Origin	DELHI
Output	4 to 20 mA DC, linearized.
Response Time	10 to 90% in 200 ms (models 651A), 70% in 2 ms (models 651TC).
Brand	DWYER USA
Ambient Temperature	32 to 122 Degree F (0 to 50 Degree C).
Storage Temperature	160 Degree F (70 Degree C)
Model Number	Series-651
Usage/Application	Process Applications where a 4 to 20 mA signal is required
Transmitter Type	2 Wire.
Power Requirements	10 to 32 VDC

Temperature Transmitter

Linearized output for precise temperature monitoring or control is combined with small size and quick, easy mounting. Rugged Series 651 Transmitters are designed for use with 2 or 3-wire Pt100 RTDs (to DIN standard 43760 or BS1904) or ungrounded Type K thermocouples. Thermocouple Models 651TC are cold junction compensated, automatic 32 to 160°F (0 to 70°C) with upscale burnout. These economical devices provide the accuracy and reliability you need at the lowest possible cost.

Features:

Various preset ranges available
Pt100 or K type thermocouple models
Standard temperature sensor head enclosure mounting

Specification:

Input : 2 or 3-wire Pt100 RTD (models 651A), or ungrounded Type K thermocouple (models 651TC).
Output Impedance : 700 Ω @ 24 VDC.
Accuracy : ±0.2°C plus 0.2% reading (models 651A), ±0.1% FS plus cold junction errors (models 651TC).
Temperature Drift : ZERO drift typical 0.02%/°C (0.09°F); SPAN typical 0.005%/°C 0.0036°F).

Applications:

Process applications where a 4 to 20 mA signal is required

Other Details:

Model	Description
651A-10	Temperature transmitter, Pt100 RTD input, range 32 to 212°F (0 to 100°C).
651A-20	Temperature transmitter, Pt100 RTD input, range 32 to 392°F (0 to 200°C).
651A-40	Temperature transmitter, Pt100 RTD input, range 32 to 752°F (0 to 400°C).
651TC-01	Temperature transmitter, type K thermocouple input, range 32 to 212°F (0 to 100°C).
651TC-02	Temperature transmitter, type K thermocouple input, range 32 to 392°F (0 to 200°C).
651TC-04	Temperature transmitter, type K thermocouple input, range 32 to 752°F (0 to 400°C).
651TC-06	Temperature transmitter, type K thermocouple input, range 32 to 1112°F (0 to 600°C).

Additional Information:

Item Code: Series-651

Temperature and Process Indicator

Rs 5,200 / Piece

Brand	Dwyer Usa
Display Range	3-digits, red, green or blue display.
Resolution	1 Degree or 0.1 count.
Weight	2.3 oz (65 g).
Usage/Application	Panel process indication
Display Type	Digital
Model	Series-TID
Condition	New
Range	-58 to 302 Degree F (thermistor); -999 to 999 counts (4 to 20 mA).
Input	PTC/NTC thermistor or 4 to 20 mA.
Power Requirement	115 VAC, 230 VAC, 24 VAC/DC.
Accuracy	1%.
Front Panel Rating	IP64. (NEMA 3R).

Temperature and Process Indicator

The SERIES TID displays temperature or a process value measured by a PTC or NTC thermistor or a 4 to 20 mA transmitter.

Features:

Thermistor or transmitter input models available
3 digit bright LED

Applications:

Panel process indication
Refrigerators, walk in coolers

Other Details:

Model	Description
TID-1110	Temperature/process indicator, °F, PTC thermistor input, 110 VAC.
TID-1120	Temperature/process indicator, °C, PTC thermistor input, 110 VAC.
TID-1210	Temperature/process indicator, °F, PTC thermistor input, 230 VAC.
TID-1220	Temperature/process indicator, °C, PTC thermistor input, 230 VAC.
TID-1410	Temperature/process indicator, °F, PTC thermistor input, 24 VAC/DC.
TID-1420	Temperature/process indicator, °C, PTC thermistor input, 24 VAC/DC.
TID-3100	Temperature/process indicator, 4-20 mA input, 110 VAC.
TID-3200	Temperature/process indicator, 4-20 mA input, 230 VAC.
TID-3400	Temperature/process indicator, 4-20 mA input, 24 VAC/DC.

Request
Callback

Additional Information:

Item Code: Series-TID

Thermocouple Limit Control

Rs 5,200 / Piece

Usage/Application	Gas fired oven and burner control
Model Number	Series-TSF
Power Consumption	4 VA.
Features	FM approved temperature limiting control
Horsepower Rating	1 HP.
Storage Temperature	-4 to 176 Degree F (-20 to 80 Degree C).
Brand	DWYER USA
Front Panel Rating	IP64 (NEMA 3R).
Accuracy	+/-1% FS.
Display	3-digit, red, 1/2″ (12.7 mm) digits, plus sign.
Power Requirements	115 VAC, 230 VAC, 12 VAC/VDC or 24 VAC/VDC
Resolution	1 Degree
Ambient Temperature	32 to 150 Degree F (0 to 65 Degree C)
Weight	2.3 oz (65 g).

Thermocouple Limit Control

The SERIES TSF Thermocouple FM Approved Limit Control provides audible alarm status along with a relay output. Unit allows the user to easily select automatic or manual reset via a built in reset button on the front panel or an external contact

Features:

FM approved temperature limiting control
Integral and remote reset capabilities

Specification:

Probe Range : 32 to 999°F (0 to 700°C) for Type J thermocouple; 32 to 999°F (0 to 999°C) for type K or S thermocouples.
Input : Type J, K or S thermocouple.
Output : SPDT relay rated 16 A @ 240 VAC resistive.
Control Type : ON/OFF; manual/automatic reset.
Memory Backup : Nonvolatile memory.

Applications:

Gas fired oven and burner control

Other Details:

Model	Description
TSF-4010	Thermocouple limit control, type J/K/S input, 110 V, °F.
TSF-4011	Thermocouple limit control, type J/K/S input, 110 V, °C.
TSF-4020	Thermocouple limit control, type J/K/S input, 230 V, °F.
TSF-4021	Thermocouple limit control, type J/K/S input, 230 V, °C.
TSF-4030	Thermocouple limit control, type J/K/S input, 12 VAC/VDC, °F.
TSF-4031	Thermocouple limit control, type J/K/S input, 12 VAC/VDC, °C.
TSF-4040	Thermocouple limit control, type J/K/S input, 24 VAC/VDC, °F.
TSF-4041	Thermocouple limit control, type J/K/S input, 24 VAC/VDC, °C.

Additional Information:

Item Code: Series-TSF

Wall Mount Temperature Sensor

Rs 5,000 / Piece

Material	ABS plastic.
Weight	0.3 lb (136 g).
Temperature Range	-40 to 140 Degree F (-40 to 60 Degree C)
Brand	DWYER USA
Usage	Building automation
Usage/Application	Room temperature monitoring
Place Of Origin	DELHI
Condition	New
Model	Series-TE-E-N
Housing Material	ABS plastic.

Wall Mount Temperature Sensor

The SERIES TE-E/N Wall Mount Temperature Sensor provides a low cost temperature input for any building management system. With large vents in the housing for proper air flow, the sensor accurately measures the ambient temperature in hotel rooms or office buildings. Multiple mounting holes on the wall plate allow for mounting to numerous surfaces.

Features:

North American or European housing aesthetic options
Uniform look matches other Dwyer wall mount devices
Universal mounting plate meets various installation requirements
Accuracy : Thermistor temp sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temp sensor: DIN class B; ±0.3°C @ 0°C (±.54°F @ 32°F).

Applications:

Room temperature monitoring
Building automation

Other Details:

Model	Description
TE-END-A	EU Wall Mount Temperature Sensor, 10K Ohm Type III Sensor
TE-END-B	EU Wall Mount Temperature Sensor, 10K Ohm Type II Sensor
TE-END-C	EU Wall Mount Temperature Sensor, 3K Ohm Sensor
TE-END-D	EU Wall Mount Temperature Sensor, Pt100 Ohm RTD Sensor
TE-END-E	EU Wall Mount Temperature Sensor, PT1K Ohm RTD Sensor
TE-END-F	EU Wall Mount Temperature Sensor, 20K Ohm Sensor
TE-NND-A	NA Wall Mount Temperature Sensor, 10K Ohm Type III Sensor
TE-NND-B	NA Wall Mount Temperature Sensor, 10K Ohm Type II Sensor
TE-NND-C	NA Wall Mount Temperature Sensor, 3K Ohm Sensor
TE-NND-D	NA Wall Mount Temperature Sensor, Pt100 Ohm RTD Sensor
TE-NND-E	NA Wall Mount Temperature Sensor, PT1K Ohm RTD Sensor
TE-NND-F	NA Wall Mount Temperature Sensor, 20K Ohm Sensor

Additional Information:

Item Code: Series-TE-E-N

Weatherproof Immersion Temperature Transmitter

Rs 7,700 / Piece

Application	Immersion temperature sensing in HVAC systems
Usage/Application	ensing in HVAC systems
Application/Usage	Immersion temperature sApplications
Brand	DWYER USA
Model Number	Series-TTW
Response Time	100 ms.
Condition	New
Enclosure Material	Painted aluminum housing
Temperature	-40 to 212 Degree F (-40 to 100 Degree C).
Rating	NEMA 4X (IP65).

Weatherproof Immersion Temperature Transmitter

The SERIES TTW Immersion Temperature Transmitter combines three popular products into a single package. Our TBU series head mounted temperature transmitter is factory mounted into our A-709 enclosure. A Pt100 RTD version of our TE series is wired to the transmitter, giving insertion lengths up to 18″. Each transmitter is factory programmed and calibrated to output a 4 to 20 mA signal proportional to the 32 to 212°F (0 to 100°C) temperature range.

Features:

Preset to 32 to 212°F (0 to 100°C) output range
USB port for easy output scale adjustment in the field

Specification:
Temperature Sensor:

Accuracy : ±3°F (±1.7°C).
Temperature Limits : Operating: -40 to 302°F (-40 to 150°C).
Sensor Curves : Pt100 RTD (TE Series Curve D).

Temperature Transmitter:

Input Range : -328 to 986°F (-200 to 530°C).
Output : Two-wire 4 to 20 mA.
Output Impedance : 600 Ω @ 24 VDC.
Power Requirements : 12 to 35 VDC.
Accuracy : ±0.2% FS.
Temperature Limits : -40 to 185°F (-40 to 85°C).

Applications:

Immersion temperature sApplications
Immersion temperature sensing in HVAC systems
ensing in HVAC systems

Additional Information:

Item Code: Series-TTW

1/4 DIN Temperature and Process Controller

Rs 5,500 / Piece

Brand

Sensocon

Sensocon Differential Pressure Gauges

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Sensocon USA Magnehelic Gauge

Elementor #2105

Oct 13, 2021 by admin 0 Comments

Differential Pressure Gauge

Rs 3,500 / Piece

Usage/Application	Industrial
Brand	Techno SALES India
I Deal In	New Only

Low Cost Sensocon Differential Pressure Gauge

We are one step ahead of our competitors in supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure.

Specifications:

Accuracy 2%
Mounts in Industry
Type : Arrow indicator
Die Cast Aluminum Housing
Standard Holes
Temperature : 20 to 140 F

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Low Pressure Differential Gauge

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

Low Pressure Differential Gauge

Low Pressure Differential Gauge for pharma companies.

Specifications:

Customized: Customized
Pressure range: 0???1.5kPa
Accuracy Grade: 0.1G
Measuring Medium: Steam

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Sensocon Differential Pressure Gauges

Rs 3,500 / Piece

Brand

Sensocon

Sensocon Differential Pressure Gauges

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Sensocon Differential Pressure Gauge

Brand

Techno SALES India

Sensocon Differential Pressure Gauge

We are one step ahead of our competitors in manufacturing and supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure.

Specifications:

Accuracy 2%
Mounts in Industry
Type : Arrow indicator
Die Cast Aluminum Housing
Standard Holes
Temperature : 20 to 140 F

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Front Mount Differential Pressure Gauge

Rs 4,500 / Piece

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

Front Mount Differential Pressure Gauge

The Series S1000Front Mount Differential Pressure Gauge makes panel mounting quick and easy. The S1000 is a diaphragm operated gauge for measuring positive, negative, or differential pressure. The S1000 was designed to allow quick installation saving time and money. This includes easy front mounting with 4 screws without any additional hardware required, and quick tubing connections with molded-in pressure fittings. The Series S1000 Front Mount Differential Pressure Gauge has a span adjustment on the back of the gauge for calibration adjustments. In addition to the time savings offered by the Series S1000 Differential Pressure Gauge, the gauge is based on the same rugged design as the S2000, which allows for years of trouble free operation.

Pressure Limits:

-20” Hg to 15 PSI (-0.677 bar to 1.034 bar)
Media Compatibility:
Air and compatible gasses

Accuracy:

+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70°F (21°C)
Temperature Ranges:
20° to 140°F (-7° to 60°C)
Housing Material: Die cast aluminum case with ABS flange and acrylic cover

Process Connection:

Duplicate high and low recessed, push on connections for 3/16” tubing – one pair side and one pair back
Weight: 1 lb 2 oz (510 g)
Accessories: 2 connection plugs, 4 mounting screws, 4 screw caps, 2 static pressure connectors, and 3 feet of vinyl tubing
Agency Approvals:
RoHS, CE

Specifications:

Indicating Pressure Reference: Differential Pressure Gauge
Features of Measurement Medium: General Pressure Gauge
Installation Structure: Direct Mounting
Function: Local Indication Type

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Front Mount Differential Pressure Gauges

Rs 4,500 / Piece

Brand

Sensocon USA

Front Mount Differential Pressure Gauges

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Sensocon USA Digital Pressure Gauge Wholesaler

Elementor #2095

Oct 13, 2021 by admin 0 Comments

Digital Differential Pressure Control – Series A4

Rs 9,500 / Piece

Brand

Integerated Engineers India

Digital Differential Pressure Gauge

Aerosense Differential Pressure Indicator/Transmitter with circular standard Differential Pressure Gage cut out

Features:

Built in High and Low Buzzer Alarm for process set parameter.
Violation with Acknowlegment key.
Unit selectable in mm wc /Pascal
Integrated 4 Digit Red LED 7 segment Display of standard 0.5″ size.
Accuracy is 0.5% of Full Scale
Optional 4-20mA OR RS-485 Modbus communication is available

Applications:

Pharma Cleanrooms
HVAC
Environmental
Pharma Machinery
Across filters
Hospital violation rooms
Operation theatres laboratories

Advantages:

Precision of measurement in HVAC duct pressure application makes this instrument suitable for optimization of energy thereby its conversation is ventilation systems

Analog Output RS-485 Communication lead to easy integration with Variable frequency drives SCADA/BMS systems, AHUs.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Digital Differential Pressure Gauge – Series A1

Rs 3,500 / Piece

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

Digital Differential Pressure Gauge – Series A1

The Series A1 Digital Differential Pressure Gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½” LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compared to mechanical gauges.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Miniature Low Cost Differential Pressure Gauge Series S-5000

Rs 786 / Piece

Brand

Integerated Engineers India

Miniature Low Cost Differential Pressure Gauge Series S-5000

Description

The Series S-5000 is a low cost, diaphragm operated, differential pressure gauge in a miniature housing. The S-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

Customizing Options Available

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Miniature Low-Cost Differential Pressure Gauge – Series Sz-5000

Rs 786 / Piece

Brand

Integerated Engineers India

Miniature Low-Cost Differential Pressure Gauge – Series Sz-5000

Description

The Series Sz-5000 is a low cost, diaphragm operated, differential pressure gauge in a miniature housing with easy access to the zero adjustment. The Sz-5000 can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 5%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

Request a Quote

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Series A3 Digital Differential Pressure Gauges

Rs 5,401 / Piece

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

Series A3 Digital Differential Pressure Gauges

The series A3 is a patent pending microprocessor based controller for positive, negative, and differential pressure as well as velocity and flow. The Series A3 includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the LCD display or uploaded using an Opti Link™ programming key. The LCD also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A3 has a significantly reduced depth, an improved look, and better performance at a lower price

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Digital Differential Pressure Gauge – Series A2

Rs 1,500 / Piece

Brand

dwyer usa

Digital Differential Pressure Gauge – Series A2

The Series A2 digital differential pressure gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% or 0.25% accuracy. The A2 digital differential pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright ½” LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.

Customizing Options Available

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

1/8 DIN Digital Differential Pressure Control – Series B4

Rs 786 / Piece

Type

Manual

1/8 DIN Digital Differential Pressure Control – Series B4

Description

The Series B4 is a 1/8 DIN digital differential pressure controller for positive, negative, and differential pressure as well as velocity and flow. The patented Series B4 Differential Pressure Cotnroller includes (2) 8A SPDT relays, and an optional digitally scaleable 4-20 mA and 0-5 V output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. The Series B4 is easily mounted in a 1/8 DIN cut-out with a panel depth of only 2.1 inches (53 mm).

Customizing Options Available

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Process Control Measurement Products

Elementor #2070

Oct 13, 2021 by admin 0 Comments

Battery Powered Temperature Indicator

Rs 2,500 / Piece

Usage/Application	Provides local temperature indication in areas without power availability
Weight	6.0 oz (170 g).
Brand	DWYER USA
Condition	New
Model	Series-BPI
Power Requirements	3.6 V AA lithium metal battery, included, user replaceable.
Battery Life	2 years.
Display	0.3″ (7.6 mm) 4-digit LCD.
Resolution	0.1 Degree C.
Ambient Operating Temperature	14 to 158 Degree F (-10 to 70 Degree C).
Storage Temperature	4 to 185 Degree F (-20 to 85 Degree C).
Front Panel Protection	NEMA 4X (IP66).

Battery Powered Temperature Indicator

The Series BPI Battery Powered Indicator accepts RTD or Thermocouple input and provides local or remote display of temperature measurements. Quickly navigate the menu system to customize for each application. Three push buttons allow the user to select input type, engineering units (°F or °C), offset temperature, decimal point position, and password protection. The indicator is housed in a polycarbonate NEMA 4X (IP66) enclosure for additional protection from the environment.

Features:

Programmable input type, engineering units (°F/°C), offset temperature, decimal point position, and password protection
Four-digit segmented display

Applications:

Provides local temperature indication in areas without power availability

Installation:
Configuration:
Fit the battery as described in Battery section, then follow the simple configuration menus printed on the reverse side of this sheet. This procedure can be performed with or without the sensor connected. Fit the correct units legend to the front panel face.

Enclosure:
The case offers various options for sensor entry. Please refer to the data sheet for further details. The sensor may be fixed directly to the housing, or remotely connected using cable and gland. Cable length must be no greater than 20 meters to comply with CE certification. All external cabling/sensor entries must maintain IP67 rating.

Additional Information:

Item Code: Series-BPI

Digital Indicating Transmitter

Rs 8,700 / Piece

Power Requirement	20 to 35 VDC.
Operating Temp	-6 to 140 Degree F (-20 to 60 Degree C)
Application	Electrically isolates pressure and level transmitters from unregulated circuits for intrinsically sa
Applications	Electrically isolates pressure and level transmitters from unregulated circuits for intrinsically sa
Condition	New
Brand	DWYER USA
Humidity	5 to 95% RH.
Storage Temperature	-40 to 176 Degree F (-40 to 80 Degree C).
Model Number	Series-MTL5541
Automation Grade	Manual
Weight	150 g.
LED Indicator	Green Power Indication.

Digital Indicating Transmitter

The SERIES MTL5541 Galvanic Barrier provides intrinsically safe isolation for communication with Dwyer® transmitters approved for use in hazardous areas. This galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. DIN rail mounting and plug-in signal and power connectors simplify installation and maintenance.

Features:

Designed to mount on most standard DIN rails
Approved for use in hazardous areas

Specification:

Hazardous Area Input : Signal range: 0 to 24 mA (including over-range); Transmitter voltage: 16.5 V at 20 mA.
Safe Area Output : Signal range: 4 to 20 mA; Under/over-range: 0 to 24 mA;Load resistance: 0 to 360Ω @ 24 mA, or 0 to 450Ω @ 20 mA; Current sink: 600Ω max.; Maximum Voltage Source: 24 VDC; Output resistance: > 1 MΩ.
Response Time : Settles to within 10% of final value within 50 µs.
Current Consumption (20 mA signal) : 51 mA @ 24V.
Maximum Power Dissipation (20 mA signal) : 0.7 W @ 24 VDC, 1.0 W @ 24 VDC.
Isolation : 250 V RMS, tested at 1500 V RMS minimum, between safe- and hazardous-area terminals; 50 V between safe-area circuits and power supply.
Transfer Accuracy at 68°F (20°C) : Better than 15 µA.
Temperature Drift : < 0.8µA/°C.
Mounting : T-section 35mm DIN rail (7.5 or 15mm) to EN 50022.
Terminals : Accommodate up to 2.5 mm2 stranded or single-core.
Safety Description : Vo= 28 V, Io= 93 mA, Po= 651mW, Um= 253 RMS or DC.

Applications:

Electrically isolates pressure and level transmitters from unregulated circuits for intrinsically safe applications

Additional Information:

Item Code: Series-MTL5541

Indicating Alarm Annunciator

Rs 2,650 / Piece

Usage/Application	Tank level monitoring
Model No.	Series-AN2
Brand	DWYER USA
Weight	9.6 oz (272 g).
Application	Water and wastewater panels
Ambient Operating Temperature	-40 to 149 Degree F (-40 to 65 Degree C).
Mounting	1/8 DIN.
Housing Material	UL rated 94V-0 high impact plastic.
Enclosure Rating	NEMA 4X (IP65) front panel.
Power Consumption	20 W (6 W on low voltage models).

Indicating Alarm Annunciator

The Series AN2 Indicating Alarm Annunciator provides visible and audible alarms for up to eight inputs. The annunciator also has two SPDT relay outputs that can be used to initiate external alarms, buzzers, or paging devices. The Integral 24 VDC power supply can power most level, temperature, pressure, and flow switches. Audible alarm conditions can be acknowledged, reset, or silenced either via the front panel push buttons or the rear terminal block. The Series AN2 can be set to any common ISA sequences including First-Out.

Features:

Includes integral 24 VDC power supply to power most switches
Can be set to any common ISA sequences

Specification:

Inputs : NO or NC switches, Open Collector Transistor (Open circuit voltage = 3.3 VDC); Logic Levels: LO = 0 to 0.9 VDC, HI = 2.4 to 28 VDC (100 KΩ input impedance).
Outputs : Two SPDT relay (3 A @ 250 VAC or 30 VDC, resistive; 1/14 HP @ 125/250 VAC, inductive).
Power Requirements : 85 to 265 VAC 50/60 Hz, 90 to 265 VDC; 12 to 36 VDC, 12 to 24 VAC (depending on model).

Applications:

Water and wastewater panels
Tank level monitoring
Temperature monitoring process

Other Details:

Model	Number of Outputs	Power Supply
AN24-1	4	85 to 265 VAC
AN24-2	4	12 to 36 VDC
AN28-1	8	85 to 265 VAC
AN28-2	8	12 to 36 VDC

Additional Information:

Item Code: Series-AN2

Miniature Current Switch

Rs 6,400 / Piece

Weight	0.5 oz (14.5 g).
Application	BAS
Model No.	Series-MCS
Brand	DWYER USA
Amperage Range	MCS-111050 0.5 to 50 A AC continuous; MCS-111001 0.01 to 1 A AC continuous.
Output Rating	Isolated, N.O. 0.3 A 130 V DC/AC.
Hysteresis	1%.
Response Time	200 ms.
Temperature Limits	32 to 122 Degree F (0 to 50 Degree C).
Humidity	10 to 95% RH (non-condensing).
Enclosure Rating	UL 94V-0 flammability rated ABS, insulation class 600 V.

Miniature Current Switch

The SERIES MCS Miniature Current Switches are ideal for monitoring the current usage in fuse boxes and small control panels. Both models have adjustable set points and LED indication to show there is power to the unit and when the switch activates. Set points can be adjusted using the potentiometer next to the LED’s. Due to the size of the switch, it is only offered in solid core and no core versions. The no core version has terminal blocks which can accept currents up to 1 A directly into the unit.

Features:

Integral mounting flange for quick installation
Compact size fits in any space

Applications:

BAS
HVAC.

Other Details:

Model	Case	Set Point	Minimum Set Point (A)	LED
MCS-111050	Solid core	Adjustable	0.5	Red/geen
MCS-111001	No core (terminal connection)	Adjustable	0.01	Red/geen

Additional Information:

Item Code: Series-MCS

Series SCS Current Switch

Rs 3,250 / Piece

Brand	Dwyer Usa
Temperature Range	5 to 140 Degree F (-15 to 60 Degree C).
Condition	New
Model	Series-SCS
Application	BAS
Frequency	50/60 Hz.
Place Of Origin	DELHI
Output	Isolated, 1 A 30 VAC/DC max, NO.
External Relay	SPST N.O., 10A at 260 VAC (5A at 30 VDC).
Power	None, self-powered.
Isolation Voltage	600 VAC RMS.
Enclosure Rating	UL, 94 V-O flammability rated, ABS plastic housing.

Series SCS Current Switch

The Series SCS Low Cost Current Switches are ideal for monitoring whether fans, pumps, or motors are operating. The current flowing through the core of the device powers the circuit without an external power supply. All models have a built in solid state output and are easy to install. Optional LED’s and 10 Amp relay modules are available. The Series SCS is available in both Split and Solid Core configurations.

Features:

Integral mounting flange for quick installation
Solid core or split core configurations

Applications:

BAS
HVAC

Other Details:

Model	Case	Amperage Range	Set Point	Switch Mode	Snap-on Relay
SCS-120025	Solid	.25 to 200 A	0.25 fixed	Under	No
SCS-111100	Solid	1 to 135 A	Adjustable	Over/under	No
SCS-111100-R	Solid	1 to 135 A	Adjustable	Over/under	Yes
SCS-220015	Split	.15 to 200 A	0.15 fixed	Under	No
SCS-220150	Split	1.5 to 200 A	1.5 fixed	Under	No
SCS-211125	Split	1.25 to 135 A	Adjustable	Over/under	No
SCS-220150-R	Split	1.5 to 200 A	1.5 fixed	Under	Yes
SCS-211125-R	Split	1.25 to 135 A	Adjustable	Over/under	Yes

Additional Information:

Item Code: Series-SCS

Vibration Transmitter

Rs 24,500 / Piece

Brand	DWYER USA
Temperature Range	-22 to 221 Degree F (-30 to 105 Degree C).
Application	Industrial
Weight	0.28 lb (0.125 kg)
Model No	Model-VBT-1
Condition	New
Usage/Application	Motors
Enclosure Rating	NEMA 6 (IP68).
Housing Material	316 SS.
Electrical Rating	9.6 to 32 VDC.
Frequency Range	10 to 1000 Hz.
Output Signal	4 to 20 mA.

Vibration Transmitter

The Model VBT-1 Vibration Transmitter continuously detects the vibration in a system and monitors for unusual operating conditions and potential failure. The vibration is converted into an analog signal at the current output. The VBT requires no setup, and there is no software required for configuration. The 2-wire loop power operation, combined with standard M12 micro cable connector and interchangeable mounting studs (1/4″-28 UNF/M8 (2) or the 1/4″-28 UNF), makes for a fast and reliable installation.

Features:

Easy set-up and operating concept
Stainless steel housing
No software required

Specification:

Accuracy : < ±3%.
Connections : M12 connector.
Mounting Orientation : Any position.
Nonlinearity : < ±0.25% of span.
Repeatability : < 0.5%.

Applications:

Motors
Pumps
Fans
Engines
Compressors
Gear boxes

Additional Information:

Item Code: Model-VBT-1

Series CCS Current Switch

Rs 1,850 / Piece

Model Number	Series-CCS
Temperature	-22 to 158 Degree F (-30 to 7 Degree C).
Humidity	0 to 95% (non-condensing).
Application/Usage	BAS
Condition	New
Brand	DWYER USA
Connection	New
Frequency	40 to 400 Hz.
Usage/Application	HVAC
Amperage Range	0 to 200 A AC.
Output	Normally open, NPN.
Isolation Voltage	2000 V.
Enclosure Rating	UL, 94 V-O flammability rated, ABS plastic housing.

Series CCS Current Switch

The SERIES CCS Current Switches are ideal for monitoring the operating status of fans, pumps, and motors. These self-powered switches can be hung or tied directly to cables or wires. For use on existing installations, split core models can be installed without disconnecting cables. LED indicators provide a visual confirmation that the current is flowing through the core. Both fixed and adjustable set points are available. The adjustable models utilize a potentiometer to easily adjust the set point.

Features:

Integral mounting flange for quick installation
Solid core or split core configurations
LED Indicator
Maximum Switch Rating : For fixed set point models: 0.3 A @ 135 VAC/DC; For adjustable set point models: 1 A @ 240 VAC.

Applications:

BAS
HVAC

Other Details:

Model	Case	Set Point	Minimum Set Point (A)	LED	Dry Contact Output
CCS-121050	Solid core	Fixed	0.50 (±0.2)	Red	Yes
CCS-111100	Solid core	Adjustable	1.00 (±0.2)	Red/green	No
CCS-221100	Split core	Fixed	1.00 (±0.2)	Red	Yes
CCS-211150	Split core	Adjustable	1.50 (±0.2)	Red/green	No
CCS-131100	Solid core	Adjustable	1.00 (±0.2)	Red/green	Yes
CCS-231150	Split core	Adjustable	1.50 (±0.2)	Red/green	Yes

Additional Information:

Item Code: Series-CCS

Bar Graph Meter

Rs 8,500 / Piece

Model	Series-BGM
Accuracy	+/-0.05% FS.
Condition	new
Storage Temperature	-67 to 176 Degree F (-55 to 80 Degree C).
Usage	Laboratory
Weight	40 oz (1.13 kg)
Operating Temperature	13 to 176 Degree F (-25 to 80 Degree C)
Brand	DWYER USA
Enclosure Rating	NEMA 1 or NEMA 4Xt model dependent IP65 front.
Decimal Point	3 positions, user selectable.
Outputs	2 SPST relay outputs (optional).
Time Delay	0.5 S
Input Range	0 to +/-10 VDC or 4 to 20 mA.

Bar Graph Meter

The Series BGM Digital Bar Graph Meter is extremely durable and can replace a wide range of analog meters. The 4-digit display will significantly reduce the potential for human error in reading by eliminating errors commonly produced by the viewing angle when reading analog meters. This series has a key pad that allows for easy access of features without complex menu structures. With the combined ability to create a wide range of custom faceplate and the optional NEMA 4X bezel, the Series BGM can be used in a variety of applications. The LED bar graph adds a visual indicator of the measured value so that it can be visually analyzed, preventing accidents or system failures from happening.

Features:

Bar graph visual indicator
High resolution for better precision
Many configurable options to design a meter for any need

Specification:

Power Requirements : 120 VAC 50/60 Hz, 5 to 12 VDC, or 10 to 30 VDC model dependent.
Power Consumption : 120 VAC: 2.4 W @ 20 mA max; 5 to 12 VDC: 1.2 W @ 100 mA max; 10 to 30 VDC: 1.5 W @ 50 mA max.
Display : LED Display: 4 red colored digits, 0.3″ height; LED Graph: 31 element bar, 0.2″ W x 3.1″ L (5.08 mm W x 78.74 mm L).
Electrical Connections : Removable screw terminal blocks.
Switch Rating : 1 A @ 200 V.
Enclosure Material : Bezel: Black epoxy enameled steel; Window: Acrylic; Case and Mounting Bracket: 304 SS.

Applications:

Visual location and indication of flow, level or air velocity

Additional Information:

Item Code: Series-BGM

Digital Timer / Tachometer / Counter

Rs 750 / Piece

Operating Temp.	32 to 122 Degree F (0 to 50 Degree C).
Humidity	35 to 85% RH (non-condensing).
Application	Industrial
Weight	4 oz (114 g).
Model Number	Series-LCT216
Display Type	Digital
Brand	DWYER USA
Condition	New
Reset Time	0.001 S. minimum.
Power Requirements	100 to 240 VAC 50 / 60 Hz.
Power Consumption	Less than 10 VA.
Internal Power Supply	12 VDC +/-10%, 100 mA.

Digital Timer / Tachometer / Counter

The Series LCT216 combines a versatile timer, counter, and tachometer in one device. The bright, easy-to-read display shows both the desired set point and the current process value as well as the operating mode that the control is functioning in. The fourteen pre-programmed timer functions are easy to set up and cover most applications. The counting functions include one stage or two stage counting along with batch, total, or dual counting modes. The Series LCT216 can also be used as a tachometer to measure rotational speeds. For quick set up, many of the programming parameters can be set with external dip switches located on the side of the unit.

Features:

Fourteen pre-programmed timer functions
One stage, two stage, batch, total, and dual counting modes

Specification:

Control Output Ratings : (Out 1) Relay: SPST 5A at 250 VAC, Transistor: NPN Open collector 100 mA / 30 VDC residual voltage = 1.5 VDC max; (Out 2) Relay: SPST 5A at 250 VAC, Transistor: NPN Open collector 100 mA / 30 VDC residual voltage = 1.5 VDC max.
Inputs : Dry contact, PNP, or NPN.
Timing Functions : 14 pre-programmed timing functions.
Display : Two-line 6 digit negative transmissive LCD display.

Applications:

Industrial ovens
Batch counting in conveyor systems
Silk screening equipment

Additional Information:

Item Code: Series-LCT216

Electronic Fan Speed Control

Rs 4,500 / Piece

Condition	New
Weight	1 lb 11 oz (.77 kg).
Model Number	Model-FC-1000
Connection	New
Temperature Range	-40 to 131 Degree F (-40 to 55 Degree C).
Brand	DWYER USA
Line Voltage Range	120-277 VAC, 60 Hz.
Input Signal Voltage	0-10 VDC.
Low Voltage Input	24 VAC, Class 2
Input Signal Impedance	10K ohms.
Locked Rotor Amp Rating	24.0.
Enclosure Rating	NEMA 1.

Electronic Fan Speed Control

The Model FC-1000 Electronic Fan Speed Control provides precise speed modulation of small AC motors. Popular 0-10 VDC input works with most process controllers, eliminating the need for more expensive dampers, damper actuators and linkages while improving overall energy efficiency of the system. This inexpensive unit enables variable control ventilation fans, condenser fans and interfacing with VAV box controllers.

Features:

Compact design allows for use in most areas
Improves energy efficiency in systems

Specification:

Full Load Amp Rating : 9.8 @ 120 VAC, 9.3 @ 208 VAC, 8.0 @ 240 VAC, 6.9 @ 277 VAC.
Electrical Connections : Line voltage: 10-32 screw terminals; Signal and low voltage input: 1/4″ quick connects.
Transient Protection : 320V surge suppression. Exceeds IEEE C62.41 standards.
Housing Materials : Cold rolled steel.
Mounting : Vertical only; four holes provided for 10 screws.

Applications:

Monitoring fans and motors

Additional Information:

Item Code: Model-FC-1000

Ice Cube Relays

Rs 12 / Piece

Model No	Series-784-4PDT
Model Number	784-4PDT
Weight	2.8 oz (80 g).
Brand	DWYER USA
Condition	New
Application	HVAC motor controls
Operating and Load Voltage Range	24 to 120 VAC, 24 VDC
Switching Operation	4PDT
Electrical Rating	15 A 120 VAC 50/60Hz; 12 A 277 VAC 50/60 Hz or 28 VDC.
Storage Temperature	-40 to 185 Degree F (-40 to 85 Degree C)
Operation Temperature	-40 to 131 Degree F (-40 to 55 Degree C).
Power Consumption	1.5 VA; 1.5 W.
Cycle Life	200000 cycles (electrical); 10000000 cycles (mechanical).
Housing	Plastic polycarbonate.

Ice Cube Relays

The Series 784 Electromechanical Ice Cube Relay is a full-featured 4PDT relay that can be used to handle loads up to 15 amps for AC or DC circuits. Utilizing the same trigger, this relay can be used in underground parking garage applications to signal audible and visual alarms for high levels of carbon monoxide, while opening the dampers and starting the exhaust fans. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color-coded. For testing the operation, a removable lockdown lever holds the test button in place. The clear plastic housing gives a view of the contacts and there is a removable I.D. tag for labeling the circuit.

Features:

Clear plastic housing to easily view the contacts
Flag and LED status indicators for visual confirmation of relay state
Socket mounted for quick installation/replacement

Applications:

Refrigeration compressor systems
HVAC motor controls
Water/wastewater pump control

Additional Information:

Item Code: Series-784-4PDT

Low Cost Digital Timer

Rs 6,700 / Piece

Model	Series-LCT316
Brand	DWYER USA
Weight	5.6 oz (158.8 g).
Usage/Application	Commercial cooking equipment
Display Type	Digital
Applications	Commercial dish washers and refrigeration equipment
Item Code	Series-LCT316
Operating Temperature	32 to 158 Degree F (0 to 70 Degree C).
Control Output Ratings	Relay, SPST, 16A at 250 VAC resistive.
Status Light	LED shows time and operation.
Inputs	Digital input for start and reset.
Supply Voltage	115 VAC, 230 VAC, 12 VAC/DC, 24 VAC/DC depending on model
Power Consumption	4VA

Low Cost Digital Timer

The Series LCT316 Low Cost Digital Timer provides accurate countdown timing for a variety of applications. The timer can be triggered remotely using the digital input terminals or locally via the set button. Time intervals can be set up to 999 minutes or seconds. The Series LCT316 has an internal buzzer to alert when the time interval has expired.

Features:

1 second to 999 minute field set time interval
Audible alarm for status indication

Applications:

Commercial cooking equipment
Commercial dish washers and refrigeration equipment

Other Details:

Model	Supply Power
LCT316-100	115 VAC
LCT316-200	230 VAC
LCT316-300	12 VAC/DC
LCT316-400	24 VAC/DC

Additional Information:

Item Code: Series-LCT316

Particulate Monitor

Rs 50,000 / Piece

Brand	DWYER USA
Condition	New
Model No	Series-DPM
Usage/Application	Baghouses
Weight	4.5 lbs (2.0 kg)
Inputs	From PMS Sensor.
Power Requirement	115 VAC 50/60 Hz, 230 VAC 50/60 Hz, or 24 VDC.
Power Consumption	6 Watts Max.
Display	LCD
Temperature	-13 to 160 Degree F (-25 to 70 Degree C).

Particulate Monitor

The DPM Particulate Monitor and PMS Particulate Sensor combine to provide a basic baghouse and cartridge filter leak detector designed for general maintenance planning and process protection. It is easy to use and reliable. Leakage is gaged in real-time, on-the-spot, without prior baseline data and without signal tuning. Simply apply power and the general condition of the filter is quickly determined. An alarm point is set by simply moving an indicator up and down the gage with the convenient, lockable key pad. For more precise alarm setup the large display provides both a logarithmic analog bar graph and an absolute digital readout. The log scale enables the user to observe both the baseline bleed through and the high peaks that are caused by filter cleaning cycles and developing leaks. Observation of both baseline and peaks is essential to setting proper alarms. The digital readout in absolute units ensures correct interpretation of the readings and provides accurate historical comparisons.

The DPM Particulate Monitor is housed in a rugged cast aluminum enclosure. An LCD displays particulate levels in bar-graph and digital forms. A lockable membrane keypad is provided for setup and adjustment.

Features:

Rugged cast aluminum housing with lockable membrane keypad
Programmable alarm points
Large LCD to display readouts digitally

Specification:

Output Ratings : Alarm Relays: 2 Form A (SPST) rated 5A @ 240V res. (must provide an 8A [maximum] fuse in series with relay load); Analog: 4 to 20 mA (Option RC).
Accuracy : Standard: ±5% of range; Optional: ±1% of range.
Display Resolution : Standard: 5 pA; Optional: 0.5 pA.
Memory Backup : For set point storage only.
Enclosure : Cast aluminum, weatherproof, NEMA 4X.
Loop Power Supply (Isolated) : 17 VDC loop supply provided by DPM control unit for PMS sensor.

Applications:

Baghouses
Cartridge Filters
Bin Vents

Request
Callback

Additional Information:

Item Code: Series-DPM

Particulate Sensor

Rs 20,700 / Piece

Model Number	Series-PMS
Ambient Temperature	-40 to 392 Degree F (-40 to 200 Degree C)
Connection	New
Condition	New
Brand	DWYER USA
Application/Usage	Cartridge Filters
Usage/Application	Baghouses
Wetted Materials	304SS and PTFE.
Electrical Connection	Low noise coaxial.

Particulate Sensor

The PMS Particulate Sensor employs a field-proven combination of passive-induction and protected-probe technologies. As particles flow near and around the probe, minute currents are dynamically induced into the probe by flowing particulate. A DSP processes the signal into an absolute output that is reasonably linear to mass. Protective layers over the probe work in combination with induction-sensing to ensure reliable operation with all types of particulate including moist powders and highly conductive dusts. Maintenance is minimal and there is no need for an air purge. For durability, the sensors are passive and free of electronics. The PMS Particulate Sensor is designed to be used with the DPM Particle Monitor in order to be intrinsically safe.

Features:

Durable housing that is free of electronics
Minimal maintenance needed

Specification:

Service : Air and compatible gases, any type particulate.
Pressure Limits : Standard: Full vacuum to 10 psi (0.69 bar); Optional: 100 psi (6.89 bar).
Output Signal : pA.
Enclosure : Standard: Painted cast aluminum, weatherproof, NEMA 4X; Optional: Intrinsically Safe, CSA.
Weight : Varies depending on length of probe and type of mount.

Applications:

Baghouses
Cartridge Filters
Bin Vents

Additional Information:

Item Code: Series-PMS

Particulate Transmitter

Rs 22,000 / Piece

Application	Filter leak or wear detection
Usage/Application	Bin vent monitoring
Accuracy	+/-5% of reading.
Model Number	Series-PMT2
Output Signal	4 to 20 mA.
Enclosure	Powder coated aluminum.
Brand	DWYER USA
Condition	New
Application/Usage	Broken bag detection in dust collectors
Applications	Emissions monitoring
Wetted Materials	316L SS, silicone, and PTFE.
Particulate Size	0.3 microns and higher.
Detection Range	5 to 5000 pA (6 selectable range options).
Pressure Limit	30 psi (2 bar).
Power Requirements	12 to 28 VDC.

Particulate Transmitter

The SERIES PMT2 Particulate Transmitter is designed to measure particulate emission levels from dust collector discharge. Using DC coupled electrostatic induction sensing technology, the transmitter monitors a pA current that is generated as particulate passes near the probe; a 4 to 20 mA signal will vary based on the particulate level. The PMT2 offers 6 sensitivity ranges allowing the user to choose the range that will best fit the application. The range and test selector switch can also be set to output a 4 mA or 20 mA signal to assist with set up or trouble shooting. Averaging time setting can be used to dampen the signal if desired.

Features:

Simple 2-wire installation for PLC and control panels
Non-stick PTFE coated probe to prevent false readings from moist and conductive dusts, condensate, and dust buildup
Remote zero calibration helps to decrease maintenance time

Specification:

Temperature Limits:Ambient: -40 to 145°F (-40 to 63°C); Process: -40 to 248°F (-40 to 120°C).
Electrical Connection : Two 1/2″ female NPT conduit openings.
Terminal Block : Removable (16 to 20 AWG wire).
Enclosure Rating : Type 4 (IP66).
Mounting Orientation : Any.
Averaging Time : 1 to 360 s (10 selectable options).
Weight: Varies with length of probe and type of mount.

Applications:

Emissions monitoring
Broken bag detection in dust collectors
Filter leak or wear detection
Bin vent monitoring

Additional Information:

Item Code: Series-PMT2

Process Indicator

Rs 5,500 / Piece

Usage/Application	Display process values from various transmitters
Condition	New
Model	Series-LCI132
Display Type	Digital
Humidity Range	95% 40 Degree C.
Brand	DWYER USA
Temperature Coefficient	100 ppm/ Degree C.
Warm Up	5 minutes
Operating Temperature	-10 to 60 Degree C
Storage Temperature	-25 to +85 Degree C
Panel Sealing	NEMA 4X (IP66).

Process Indicator

THE SERIES LCI132 PROCESS INDICATORS offer flexibility and value in a low cost, compact 1/32 DIN package. The shallow depth of these full size panel meters allows installation in panels only 2.76″ (70 mm) deep with room to spare.

Features:

Fits in 1/32 DIN panel cutouts
IP65 (NEMA 4X) front housing
Fully programmable
Various voltage and current inputs fits most processes

Specification:
Model – LCI132-0X

Range : Input Volts (DC): ±200 V, ±20 V, ±10 V; Input Amperes: ±100 mV, ±20 mA;
Resolution : Input Volts (DC): 0.1 V, 0.01 V, 1 mV; Input Amperes: 0.1 mV, 0.01 mA; Input Impedance: Volts: 1 M Ω, mV: 100 M Ω, mA: 12.1 Ω.

Model – LCI132-1X

Range AC : Input Volts: 600.0, 100.0; Input Amperes: 5.000, 1.000;
Range DC : Input Volts: -199.9, ±600.0, ±100.0; Input Amperes: -1.999, +5.000, ±1.000;
Resolution : Input Volts: 0.1 V; Input Amperes: 1 mA Input Impedance: Volts: 3 M Ω (106), Amps: 12 m Ω (10-3).
Accuracy at 23ºC ±5ºC : 100/600 VDC 1/5 A DC; 600V/5A AC: ±(0.2% reading + 3 digits). 100 V / 1A AC: ±(0.4% reading + 4 digits).

Power Supply and Fuses (DIN 41661) (Not supplied):

LCI132-X0 : 85–265 VAC 50/60 Hz and 100-300 VDC: Fuse: 0.1A/ 250V.
LCI132-X1 : 21-53 VAC 50/60Hz and 10.5-70 VDC: Fuse 0.5A/ 250V.

Display:

LCI132-X0 : 85–265 VAC 50/60 Hz and 100-300 VDC: Fuse: 0.1A/ 250V.
LCI132-X1 : 21-53 VAC 50/60Hz and 10.5-70 VDC: Fuse 0.5A/ 250V.

Applications:

Display process values from various transmitters

Other Details:

Model	Input	Supply Voltage
LCI132-00	±100 VDC; ±20 VDC; ±10 VDC; ±200 VDC; ±20 mA DC	120/240 VAC
LCI132-01	±100 VDC; ±20 VDC; ±10 VDC; ±200 VDC; ±20 mA DC	24/48 VAC
LCI132-10	±100 VAC; 600 VAC; 5 A (DC) 1A (AC); -199.9 to +600 VDC; ±100 VDC -1.999 to 5 A (DC) ±1 A (DC);	120/240 VAC
LCI132-11	±100 VAC; 600 VAC; 5 A (DC) 1 A (AC); -199.9 to +600 VDC; ±100 VDC -1.999 to 5 A (DC) ±1 A (DC);	24/48 VAC

Additional Information:

Item Code: Series-LCI132

Process and Temperature Alarm Switch Module

Rs 6,500 / Piece

Operating Temperature	32 to 131 Degree F (0 to 55 Degree C).
Model No.	Series-SC1
Storage Temperature	-40 to 176 Degree F (-40 to 80 Degree C).
Brand	DWYER USA
Usage/Application	Industrial processing equipment
Application	Stand alone CO monitoring in parking garage
Isolation	1500 V rms between outputs, input, and power.
Set Points	Adjustable 0 to 100% of span.
Deadband	Adjustable 0.25% to 100% of span.
Dimension	2.95″ H x 0.89″ W x 3.89″ D (75 x 22.5 x 98.5 mm).

Process and Temperature Alarm Switch Module

The Series SC1 Thermocouple Limit/Alarm Switch Modules are on-off or limit switches with selectable process signal. Input type, scale range, output action, and output type are all selectable by the user in the field. All selections are made through easily accessible switches without the need to open the product. Each unit has two form C (SPDT) relays which can operate independently, or be logically connected to operate as a DPDT output. A two color LED indicator indicates the status of each output relay.

These units mount easily on a standard 35 mm DIN rail. Low Voltage (SCLXXXX) units are also available.

Features:

Accepts current, voltage, thermocouple, or RTD inputs
Mounts on standard 35 mm DIN rail
Two color LED indicator to indicate the status of each output relay
Programmable input type, scale range, output action, and output type

Specification:

Power Supply : SC models: 85 to 265 VDC/VAC, 50 to 400 Hz; SCL models: 12 to 24 VDC/VAC, 50 to 400 Hz.
Drift : ±0.02%/°C typical ±0.05%/°C maximum.
Excitation Current : (SC1490) Cu10Ω = 5 mA; Plt 100Ω, Ni 100Ω, Ni 120Ω = 500µA; Plt 500Ω, NiFe 1000Ω = 100 µA; Plt 1000Ω = 50 µA.
Lead Compensation Error : (SC1490) ˜ 0.02%/Ω.
Open Lead Protection : (SC1490) upscale only.
Input Impedance : SC1090: Voltage input = 1 MΩ, current input = 10Ω; SC1290: 3 MΩ.
Sensor Burnout Protection : Selectable.
Relay Output : Form C, SPDT, one per set point, 5A @ 250 VAC, resistive.
Latch Circuit Reset : Automatic at power up. Manual with reset switch on front of module.
Indicators : One dual color LED per set point. Red = relay on, green = relay off.
Wiring Terminals : Screw driven compression type.

Applications:

Stand alone CO monitoring in parking garage
Industrial processing equipment

Other Details:

Model	Description	Power Supply
SC1090	4 to 20 mA, 10 to 50 mA, 0 to 20 mA, 0 to 10 V, -10 to 10 mV	85 to 265 VDC/VAC
SC1290	Thermocouple type J, K, R, S, T, E	85 to 265 VDC/VAC
SC1490	RTD Pt1000 Ni100, Ni120, Cu10, Ni-Fe1000, Ni-Fe2000	85 to 265 VDC/VAC
SCL1090	4 to 20 mA, 10 to 50 mA, 0 to 20 mA, 0 to 10 V, -10 to 10 mV	12 to 24 VDC/VAC
SCL1290	Thermocouple type J, K, R, S, T, E	12 to 24 VDC/VAC
SCL1490	RTD Pt1000 Ni100, Ni120, Cu10, Ni-Fe1000, N-Fe2000	12 to 24 VDC/VAC

Additional Information:

Item Code: Series-SC1

Zener Barrier

Rs 1,700 / Piece

Weight	4.9 oz (140 g).
Power	20 to 35 VDC w.r.t. earth.
Model Number	Series-MTL7706-7787
Brand	DWYER USA
Connection	New
Condition	New
Storage Temperature	-40 to 176 Degree F (-40 to 80 Degree C).
Usage/Application	Electrically isolates pressure and level transmitters from unregulated circuits for intrinsically sa
Safe Area Output	4 to 20 mA.
LED Indicator	Green Power Indication.
Operating Temperature	-4 to 140 Degree F (-20 to 60 Degree C)
Humidity	5 to 95% RH.

Zener Barrier

The MTL7706/7787 is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.

Features:

Approved for use in hazardous areas

Specification:

Transmitter Voltage : 16.2 V @ 20 mA with 250Ω load (negative w.r.t. earth); 11.0 V @ 20 mA with 500Ω load (negative w.r.t. earth).
Accuracy : ±2 µA under all conditions.
Terminals : Accommodate up to 2.5 mm² stranded or single-core.
Safety Description : 28 µV, 300Ω, 93 mA.

Applications:

Electrically isolates pressure and level transmitters from unregulated circuits for intrinsically safe application

Request
Callback

Additional Information:

Item Code: Series-MTL7706-7787