envirotech1976@gmail.com – Page 2 – envirotechdelhi.co.in

www.envirotechindustrialproductsindia.in

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE FOR Daultabad Industrial Area Gurgaon Haryana

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE FOR Daultabad Industrial Area Gurgaon Haryana

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%

No Power Required
Low Cost
Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s simple, frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents: Click Here for Proposition 65 WARNING.

PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity with Dwyer Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Model	Description
2000-1.5KPA	MAGNEHELIC Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05.
2000-10KPA	MAGNEHELIC Differential Pressure Gage, Range 0-10 kPa, minor divisions .20.
2000-15KPA	MAGNEHELIC Differential Pressure Gage, Range 0-15 kPa, minor divisions .50.
2000-1KPA	MAGNEHELIC Differential Pressure Gage, Range 0-1 kPa, minor divisions .02.
2000-20KPA	MAGNEHELIC Differential Pressure Gage, Range 0-20 kPa, minor divisions .50.
2000-25KPA	MAGNEHELIC Differential Pressure Gage, Range 0-25 kPa, minor divisions .50.
2000-2KPA	MAGNEHELIC Differential Pressure Gage, Range 0-2 kPa, minor divisions .05.
2000-30KPA	MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0.
2000-3KPA	MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa, minor divisions .10.
2000-4KPA	MAGNEHELIC Differential Pressure Gage, Range 0-4 kPa, minor divisions .10.
2000-5KPA	MAGNEHELIC Differential Pressure Gage, Range 0-5 kPa, minor divisions .10.
2000-8KPA	MAGNEHELIC Differential Pressure Gage, Range 0-8 kPa, minor divisions .20.
2300-1KPA	MAGNEHELIC Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02.
2300-3KPA	MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10.

Additional Information:

Item Code: DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE FOR Daultabad Industrial Area Gurgaon Haryana
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproducts.net
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com

Dwyer Pressure Gauge Wholesaler In INDIA, Dwyer Products INDIA DELHI, Dwyer Products INDIA DELHI, Series 2000 Magnehelic Differential Pressure Gauge, SUPER SELLER DWYER / MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE All India, TRUSTED SELLER DWYER / MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE ALL INDIA

MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA

MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%

No Power Required
Low Cost
Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents: Click Here for Proposition 65 WARNING.

PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity with Dwyer Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Model	Description
2000-1.5KPA	MAGNEHELIC Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05.
2000-10KPA	MAGNEHELIC Differential Pressure Gage, Range 0-10 kPa, minor divisions .20.
2000-15KPA	MAGNEHELIC Differential Pressure Gage, Range 0-15 kPa, minor divisions .50.
2000-1KPA	MAGNEHELIC Differential Pressure Gage, Range 0-1 kPa, minor divisions .02.
2000-20KPA	MAGNEHELIC Differential Pressure Gage, Range 0-20 kPa, minor divisions .50.
2000-25KPA	MAGNEHELIC Differential Pressure Gage, Range 0-25 kPa, minor divisions .50.
2000-2KPA	MAGNEHELIC Differential Pressure Gage, Range 0-2 kPa, minor divisions .05.
2000-30KPA	MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0.
2000-3KPA	MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa, minor divisions .10.
2000-4KPA	MAGNEHELIC Differential Pressure Gage, Range 0-4 kPa, minor divisions .10.
2000-5KPA	MAGNEHELIC Differential Pressure Gage, Range 0-5 kPa, minor divisions .10.
2000-8KPA	MAGNEHELIC Differential Pressure Gage, Range 0-8 kPa, minor divisions .20.
2300-1KPA	MAGNEHELIC Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02.
2300-3KPA	MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10.

Additional Information:

Item Code: MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com
www.envirotechindia.co.in

CATEGORY LEDER GEMTECH / DIFFERENTIAL PRESSURE GAUGE ALL INDIA, DESH KA NUMBER ONE GEMTECH DIFFERENTIAL PRESSURE GAUGE, Differential Pressure Gauge Wholesaler Dealers, Differential Pressure Gauge Wholesaler Dealers, Gages Differential Pressure – GEMTECH INSTRUMENT, GEMTECH / DIFFERENTIAL PRESSURE GAUGE SUPPLIER ALL INDIA LOCATION, GEMTECH DIFFERENTIAL PRESSURE GAUGE – BEST INDUSTRIAL AREA IN DELHI NCR, GEMTECH Differential Pressure Gauge GAUGE – Rice Mill Machinery Industries, GEMTECH DIFFERENTIAL PRESSURE GAUGE IN KARNATAKA BANGALORE INDUSTRIAL AREA

जेमटेक डिफरेंशियल प्रेशर गेज < सही विकल्प < सही कीमत > अभी खरीदें

जेमटेक डिफरेंशियल प्रेशर गेज < सही विकल्प < सही कीमत > अभी खरीदें

GEMTECH DIFFERENTIAL PRESSURE GAUGE < RIGHT CHOICE < RIGHT PRICE < RIGHT NOW

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materi

SPECIFICATION

Ambient Temperature – -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back

Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
RANGE – PSI

Model	Description
G2201	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-1 PSI,Minor Divisions .02
G2202	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-2 PSI,Minor Divisions .05
G2203	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-3 PSI,Minor Divisions .10
G2204	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-4 PSI,Minor Divisions .10
G2205	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-5 PSI,Minor Divisions .10
G2210	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-10 PSI,Minor Divisions .20,MP Option Standard
G2215	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-15 PSI,Minor Divisions .50,MP Option Standard
G2220	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-20 PSI,Minor Divisions .50,MP Option Standard
G2230	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-30 PSI,Minor Divisions 1.0,HP Option Standard

Additional Information:

Item Code: जेमटेक डिफरेंशियल प्रेशर गेज < सही विकल्प < सही कीमत > अभी खरीदें
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com
www.envirotechindia.co.in

CATEGORY LEDER DWYER Magnehelic Differential Pressure Gauge ALL INDIA, DWYER DIFFERENTIAL PRESSURE Gauge Dealers Delhi, Dwyer Differential Pressure Switch Wholesaler, Dwyer Distributor Envirotech Industrial India, Dwyer Distributors India, Dwyer Fittings Accessories, Dwyer Instruments, Dwyer Instruments Distributors Delhi, Dwyer Instruments Distributors in Delhi, Dwyer Instruments Distributors in India, Dwyer Instruments Distributors Wholesaler In India, Dwyer Instruments, Dwyer Instruments Distributors Delhi, Dwyer Magnehelic Gauge Wholesale Suppliers India, Dwyer Pressure Gauge Wholesaler In INDIA, Dwyer Pressure Gauge Wholesaler In INDIA, Dwyer Products INDIA DELHI, Dwyer Products INDIA DELHI, Dwyer Usa Magnehelic Gauge Wholesale Noida, Mounting Options Dwyer Instruments, SUPER SELLER DWYER / MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE All India, TRUSTED SELLER DWYER / MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE ALL INDIA

Mgneahelic Differential Pressure Gauge FROM Malur Industrial Area Karnataka

Mgneahelic Differential Pressure Gauge FROM Malur Industrial Area Karnataka

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%

No Power Required
Low Cost
Used in Isolation/ Hospital Environments and Temporary Units (no Power Required)

Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures–either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents: Click Here for Proposition 65 WARNING.

PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity with Dwyer Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication.

Model	Description
2000-1.5KPA	MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05.
2000-10KPA	MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20.
2000-15KPA	MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50.
2000-1KPA	MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02.
2000-20KPA	MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50.
2000-25KPA	MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50.
2000-2KPA	MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05.
2000-30KPA	MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0.
2000-3KPA	MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10.
2000-4KPA	MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10.
2000-5KPA	MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10.
2000-8KPA	MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20.
2300-1KPA	MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02.
2300-3KPA	MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10.

Additional Information:

Item Code: Mgneahelic Differential Pressure Gauge FROM Malur Industrial Area Karnataka
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindia.co.in
www.envirotechdelhi.in
www.envirotechdelhi.net
www.envirotechindia.info
www.envirotechdelhi.info
www.envirotechindia.net
www.envirotechdelhi.co.in

CATEGORY LEDER GEMTECH / DIFFERENTIAL PRESSURE GAUGE ALL INDIA, DESH KA NUMBER ONE GEMTECH DIFFERENTIAL PRESSURE GAUGE, Differential Pressure Gauge Wholesaler Dealers, Gages Differential Pressure – GEMTECH INSTRUMENT, Gages Differential Pressure – GEMTECH INSTRUMENT, GEMTECH / DIFFERENTIAL PRESSURE GAUGE SUPPLIER ALL INDIA LOCATION, GEMTECH DIFFERENTIAL PRESSURE GAUGE – BEST INDUSTRIAL AREA IN DELHI NCR, GEMTECH Differential Pressure Gauge GAUGE – Rice Mill Machinery Industries, GEMTECH DIFFERENTIAL PRESSURE GAUGE IN KARNATAKA BANGALORE INDUSTRIAL AREA

GEMTECH DIFFERENTIAL PRESSURE GAUGE FROM JLPL INDUSTRIAL AREA MOHALI PUNJAB

GEMTECH DIFFERENTIAL PRESSURE GAUGE FROM JLPL INDUSTRIAL AREA MOHALI PUNJAB

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materi

SPECIFICATION

Ambient Temperature – -21 ~140 -6 ~60
Rated Pressure -20 inHg~30 inHg (-68~103KPa)
Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
Accuracy – ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)
Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range – MM Of Water

Model	Description
G2000-100MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-100 MM WC Minor Divisions 2.0.
G2000-10MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-10 MM WC Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-150 MM WC
G2000-15MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-15 MM WC
G2000-200MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-200 MM WC
G2000-250MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-250 MM WC
G2000-25MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-25 MM WC Minor Divisions .50.
G2000-300MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-300 MM WC
G2000-50MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-50 MM W.C.,Minor Divisions 1.0.
G2000-6MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-6 MM W.C.,Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	GEMTECH DIFFERENTIAL PRESSURE GAUGE,Range 0-80 MM W.C.,Minor Divisions 2.0.

Additional Information:

Item Code: GEMTECH DIFFERENTIAL PRESSURE GAUGE FROM JLPL INDUSTRIAL AREA MOHALI PUNJAB
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindia.co.in
www.envirotechdelhi.in
www.envirotechdelhi.net
www.envirotechindia.info
www.envirotechdelhi.info
www.envirotechindia.net
www.envirotechdelhi.co.in

Series ADH Nicotra Forward Curved Centrifugal Fan

Nicotra Forward Curved Centrifugal Fan ADH 160 S

Nicotra Forward Curved Centrifugal Fan ADH 160 S

The Nicotra Forward Curved Centrifugal Fan ADH 160 S Is A Premium-Quality Double-Width, Double-Inlet (DWDI) Belt-Driven Centrifugal Fan Engineered For Reliable Air Movement In Commercial And Industrial HVAC Systems. Built With A Galvanized Steel Impeller And Housing, The ADH 160 S Offers High Airflow, Low Noise Operation, Smooth Performance, And Long Service Life. It Is Ideal For Air Handling Units (AHUs), Ventilation Systems, Clean Rooms, And Industrial Process Ventilation. The ADH Series Is AMCA-Certified And Designed For Efficient, Continuous-Duty Operation.

Key Features – Nicotra ADH 160 S

Forward Curved Double Width Double Inlet (DWDI) Design
High Airflow With Stable Static Pressure
Low Vibration And Quiet Operation
Galvanized Steel Impeller And Housing
Dynamically Balanced Impeller For Smooth Running
Belt-Driven Design For Flexible Speed Selection
Heavy-Duty Ball Bearings For Long Life
High Efficiency And Low Power Consumption
Suitable For Continuous Industrial Operation
Easy Installation And Maintenance
AMCA Certified Air Performance
Reliable Performance In HVAC Applications

Applications – Nicotra ADH 160 S

Air Handling Units (AHU)
HVAC Systems
Fresh Air Ventilation
Industrial Ventilation
Commercial Buildings
Clean Rooms
Pharmaceutical Plants
Food Processing Units
Hospitals
Laboratories
Textile Industry
Manufacturing Facilities
Exhaust Air Systems
Air Conditioning Equipment
Dust Collection Systems

Product Specifications – Nicotra ADH 160 S

Specification	Details
Product Name	Nicotra Forward Curved Centrifugal Fan
Model	ADH 160 S
Fan Type	Forward Curved DWDI Centrifugal Fan
Impeller Diameter	160 mm
Drive Type	Belt Driven
Blade Material	Galvanized Steel
Housing Material	Galvanized Steel
Impeller Balance	Dynamically Balanced
Bearing Type	Heavy Duty Ball Bearing
Mounting	Horizontal
Airflow	Depends on motor speed and pulley selection
Static Pressure	Depends on operating point
Rotation	Clockwise/Counter-clockwise (configuration dependent)
Application	HVAC & Industrial Ventilation
Operating Duty	Continuous
Country of Origin	Italy / Malaysia (depending on supplied model)

Additional Information:

Item Code: Nicotra Forward Curved Centrifugal Fan ADH 160 S
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com
www.envirotechindia.co.in

Series RDH Nicotra Backard Curved Centrifugal Fan HVAC Online

Nicotra Backward Curved Centrifugal Fan RDH 160 S

Nicotra Backward Curved Centrifugal Fan RDH 160 S

The Nicotra RDH 160 S Backward Curved Centrifugal Fan Is A Premium-Quality Double-Inlet Centrifugal Fan Designed For HVAC, Air Handling Units (AHUs), Industrial Ventilation, And Clean Air Applications. Featuring A Backward-Curved Iimpeller, The RDH 160 S Delivers High Airflow, Excellent Static Pressure, Low Noise Levels, And Superior Energy Efficiency. Its Rugged Galvanized Steel Construction Ensures Long Service Life And Reliable Performance In Demanding Industrial Environments.

Key Features

High-Efficiency Backward Curved Impeller
Double-Inlet Centrifugal Fan Design
Low Noise And Vibration
Energy-Efficient Operation
Heavy-Duty Galvanized Steel Construction
Reliable Performance With Long Service Life
Suitable For Continuous-Duty Industrial Applications
Easy Installation And Maintenance
Stable Airflow With High Static Pressure
Ideal For HVAC And Air Handling Systems

Nicotra Applications

Air Handling Units (AHU)
HVAC Systems
Industrial Ventilation
Clean Rooms
Pharmaceutical Industries
Hospitals
Commercial Buildings
Food Processing Plants
Textile Industry
Electronic Manufacturing
Laboratories
Data Centers
Fresh Air Supply Systems
Exhaust Ventilation Systems

Product Specifications (RDH 160 S)

Parameter	Specification
Product Type	Backward Curved Centrifugal Fan
Model	RDH 160 S
Brand	Nicotra
Fan Type	Double Inlet
Impeller Type	Backward Curved
Material	Galvanized Steel
Drive Type	Belt Driven
Airflow	Up to approximately 260 m³/h*
Voltage	230 V / 50 Hz*
Maximum Operating Temperature	60°C*
Noise Level	Approximately 58 dB(A)*
Mounting	Horizontal
Cooling	Air Cooled
Applications	AHU, HVAC, Industrial Ventilation
Country of Origin	Italy (Brand)

*Values May Vary Depending On Motor Selection, Pulley Ratio, And Operating Conditions. Always Confirm The Exact Performance From The Fan Selection Data Before Procurement.

Additional Information:

Item Nicotra Backward Curved Centrifugal Fan RDH 160 S
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com
www.envirotechindia.co.in

Series ADH Nicotra Forward Curved Centrifugal Fan

Nicotra Forward Curved Centrifugal Fan ADH 180 S

Nicotra Forward Curved Centrifugal Fan ADH 180 S

The Nicotra Forward Curved Centrifugal Fan ADH 180 S Is A High-Performance Double-Inlet Forward Curved Centrifugal Fan Engineered For HVAC, Ventilation, And Industrial Air Handling Applications. Designed For Reliable Airflow, Low Noise, And Long Service Life, It Is Ideal For AHUs, FCUs, Clean Rooms, Pharmaceutical Plants, Hospitals, Commercial Buildings, And Industrial Ventilation Systems. The ADH Series Is AMCA-Certified For Air Performance And Is Manufactured To International Quality Standards.

Key Features

Forward Curved Double Inlet (DWDI) Impeller
High Airflow With Stable Static Pressure
Low Noise And Vibration
Heavy-Duty Galvanized Steel Construction
Dynamically Balanced Impeller
Energy-Efficient Performance
Smooth And Reliable Operation
Long Service Life With Low Maintenance
Suitable For Belt-Driven HVAC Applications
AMCA Certified Air Performance

Applications

Air Handling Units (AHU)
HVAC Systems
Pharmaceutical Industries
Hospitals & Healthcare Facilities
Clean Rooms
Food Processing Plants
Commercial Buildings
Industrial Ventilation
Textile Industry
OEM Ventilation Equipment
Laboratories
Shopping Malls & Office Buildings

Product Specifications

Parameter	Specification
Product Name	Nicotra Forward Curved Centrifugal Fan
Model	ADH 180 S
Fan Type	Double Inlet Forward Curved (DWDI)
Impeller Diameter	180 MM
Number of Blades	40
Impeller Weight	Approx. 1.5 kg
Material	Galvanized Steel
Drive Type	Belt Driven
Balancing Standard	DIN 24166 Balance Class 2
Applications	AHU, HVAC, Ventilation
Country of Origin	Malaysia / Italy (depending on supply)
Brand	Nicotra

The ADH 180 Model Uses a 180 MM Impeller With 40 Forward-Curved Blades, And The Published Technical Data Specifies An Impeller Weight Of Approximately 1.5 KG.

Additional Information:

Item Code: Nicotra Forward Curved Centrifugal Fan ADH 180 S
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindia.co.in
www.envirotechdelhi.in
ww.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.co.in

Series RDH Nicotra Backard Curved Centrifugal Fan HVAC Online

Nicotra Backward Curved Centrifugal Fan RDH 180 R

Nicotra Backward Curved Centrifugal Fan RDH 180 R

The Nicotra RDH 180 R Backward Curved Centrifugal Fan Is A High-Performance Double-Inlet Centrifugal Fan Engineered For HVAC And Industrial Air Handling Systems. Designed For Reliable Operation, Low Noise, And High Energy Efficiency, The RDH 180 R Is Ideal For Applications Requiring Consistent Airflow And Medium To High Static Pressure. Its Galvanized Steel Construction And Precision-Balanced Backward Curved Impeller Ensure Long Service Life And Dependable Performance.

Key Features – Nicotra

High-Efficiency Backward Curved Impeller
Double-Inlet Centrifugal Fan Design
Heavy-Duty Galvanized Steel Housing
Low Vibration And Low Noise Operation
Precision-Balanced Impeller For Smooth Performance
Suitable For Belt-Driven Applications
High Airflow With Stable Static Pressure
Durable Construction For Continuous Industrial Duty
Easy Installation And Maintenance
Reliable Performance In HVAC Systems
Long Operational Life
Energy-Efficient Air Movement Solution

Applications – Nicotra

Air Handling Units (AHU)
HVAC Systems
Commercial Buildings
Industrial Ventilation
Pharmaceutical Plants
Clean Rooms
Food Processing Industry
Textile Industry
Hospitals
Laboratories
Manufacturing Facilities
Ventilation and Air Conditioning Systems.

Product Specifications – Nicotra

Parameter	Specification
Brand	Nicotra
Model	RDH 180 R
Product Type	Backward Curved Centrifugal Fan
Fan Type	Double Inlet, Belt Driven
Impeller Diameter	180 mm
Blade Type	Backward Curved
Housing Material	Galvanized Steel
Drive Type	Belt Drive
Installation	Horizontal
Application	HVAC & Industrial Ventilation
Duty	Continuous Operation
Country of Origin	Italy (Brand) / As supplied by manufacturer

Additional Information:

Item Code: Nicotra Backward Curved Centrifugal Fan RDH 180 R
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com
www.envirotechindia.co.in

Series RDH Nicotra Backard Curved Centrifugal Fan HVAC Online

Nicotra Backward Curved Centrifugal Fan RDH 180 S

Nicotra Backward Curved Centrifugal Fan RDH 180 S

Product / Service Description

Nicotra RDH 180 S Is A High-Performance Backward Curved/Inclined Double-Inlet Centrifugal Fan Designed For Efficient Air Movement In Ventilation, HVAC And Air-Handling Applications. The RDH Series Features A Robust Galvanized-Steel Scroll Casing And Backward-Inclined Centrifugal Impeller Design For Reliable And Efficient Operation.
Key Features

Original Nicotra Centrifugal Fan Technology
RDH 180 Size
Backward Curved / Backward Inclined Impeller Design
Double-Inlet Centrifugal Configuration
Robust Galvanized-Steel Scroll Casing
High-Efficiency Air Movement
Reliable Continuous-Duty Operation
Suitable For HVAC And Industrial Ventilation
Designed For Stable Airflow And Pressure Performance
AMCA-Certified RDH Product Family Available

Nicotra – Applications

HVAC Air Handling Units (AHU)
Industrial Ventilation Systems
Air-Conditioning Systems
Factory Ventilation
Commercial Ventilation
Air-Handling Equipment
Cooling And Ventilation Applications
Industrial Air Circulation Systems

Nicotra – Product Specifications

Brand: Nicotra
Model: RDH 180 S
Product Type: Backward Curved / Backward Inclined Centrifugal Fan
Configuration: Double Inlet
Impeller Size: 180 MM
Impeller Blades: Backward-Inclined Design
Casing: Galvanized Steel
Drive: Belt-Driven Configuration
Application: HVAC / Industrial Ventilation / Air Handling

For The RDH 180 Technical-Data Version, Nicotra Documentation Lists An Approximately 180 MM Impeller Diameter, 8 Blades, 0.62 KG Impeller Weight And 0.003 Kg·m² Moment Of Inertia. Exact Airflow, Pressure, RPM And Motor Power Depend On The Selected RDH 180 Configuration And Operating Point.

Nicotra

Nicotra RDH 180 S – Backward Curved Centrifugal Fan
High-Efficiency Centrifugal Air-Moving Solution For HVAC, Ventilation And Industrial Air-Handling Applications.

Additional Information:

Item Code: Nicotra Backward Curved Centrifugal Fan RDH 180 S
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com
www.envirotechindia.co.in

+(91)-9871034100

07AOSPS8386M1ZM

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE FOR Daultabad Industrial Area Gurgaon Haryana

MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA

जेमटेक डिफरेंशियल प्रेशर गेज < सही विकल्प < सही कीमत > अभी खरीदें

Mgneahelic Differential Pressure Gauge FROM Malur Industrial Area Karnataka

GEMTECH DIFFERENTIAL PRESSURE GAUGE FROM JLPL INDUSTRIAL AREA MOHALI PUNJAB

Nicotra Forward Curved Centrifugal Fan ADH 160 S

Nicotra Backward Curved Centrifugal Fan RDH 160 S

Nicotra Forward Curved Centrifugal Fan ADH 180 S

Nicotra Backward Curved Centrifugal Fan RDH 180 R

Nicotra Backward Curved Centrifugal Fan RDH 180 S

Tag: envirotech1976@gmail.com