Setra Model 3100B0200S01Bis an Industrial OEM Pressure Transmitter Designed For Accurate And Reliable Measurement Of Pressure Up To 0–200 Bar.It Uses Thin-Film Sensing Technology And is Suitable For Industrial,Hydraulic,Irrigation,Pump,Compressor And Process-Monitoring Applications.The Specified Configuration Uses 4–20 mA Output,8–30 VDC Supply And 1/4″ NPT Process Connection Technical Data
Brand: Setra Systems
Series: Model 3100
Part No.: 3100B0200S01B
Pressure Range: 0–200 Bar
Output: 4–20 mA
Supply Voltage: 8–30 VDC
Accuracy: ±0.25% FS
Pressure Type: Gauge/Sealed Gauge configuration as ordered
Process Connection: 1/4″ NPT Male
Electrical Connection: Industrial DIN
Enclosure: IP67
Operating Temperature: -40°C to +125°C
Compensated Temperature: -40°C to +125°C
Response Time: Approximately 1 ms
Wetted Parts: 17-4PH Stainless-Steel Diaphragm And 304 Stainless-Steel Fittings
Construction: All-Welded Stainless Steel
Weight: Approx. 35 g For Standard Model 3100 Construction
Product Features:
• High Accuracy And Fast Response • Rugged Industrial Construction • 4–20 mA Standard Analog Output • Wide DC Supply Range • IP67 Protection • Excellent Vibration Resistance • Compact OEM Design • Reliable Long-Term Operation • Suitable For High-Pressure Applications • Easy Integration With PLC And Control Systems
Field Of Application:
Hydraulic Machinery,Hydraulic Power Packs,Pumps,Booster Systems, Compressors,Irrigation Systems,Water Treatment Plants,HVAC Equipment, Refrigeration Systems,Industrial Automation,Process Control, Manufacturing Machinery and OEM Equipment
Ambient Condition:
Designed For Industrial Environments With An Operating Temperature Range Of Approximately -40°C to +125°C.IP67 Protection Helps Protect Against Dust And Water Ingress When Correctly Installed
Material:
Stainless-Steel Construction With Stainless-Steel Wetted Components, Suitable For Demanding Industrial Pressure Applications
Electrical Data:
2-Wire 4–20 mA Current Output With 8–30 VDC Supply.Connect The Transmitter According To The Specified Wiring Diagram And Maintain Correct Polarity
Installation Guide:
Install On a Compatible 1/4″ NPT Pressure Port.Use Suitable Sealing Material Where Required.Do Not Exceed The Rated Pressure Range. Connect The 4–20 mA Loop To a Suitable DC Supply And Control System. Check For Leakage And Verify The Output Signal After Installation
Approval:
Applicable Configurations Provide IP67 Protection And Relevant EMC/RoHS Compliance.Check The Product Label And Exact Datasheet For Configuration-Specific Approvals
Accessories:
Mating Connector,Cable,Pressure Fittings,Thread Adapters,24 VDC Power Supply,PLC/Display Interface And Calibration Equipment.
The Setra 3100B0050G01B Pressure Transmitteris Designed For Industrial Pressure Measurement.It is Suitable For Hydraulic Systems, Compressors,Pumps,Process Equipment And Industrial Automation Applications.Its Compact Design Supports Reliable Pressure Monitoring In Industrial Environments.
SETRA 3100B0250S02B Is a High-Pressure Industrial Pressure Transmitter Designed For Reliable And Continuous Pressure Measurement. It Provides a 4–20 mA Output And is Suitable For OEM And Industrial Pressure-Monitoring Applications.The Compact 3100 Series Design Uses a Sputtered Thin-Film Sensing Element And Stainless-Steel Wetted Construction Technical Data
MANUFACTURER: SETRA
Model: 3100B0250S02B
Pressure Range: 0 to 250 Bar
Pressure Type: Gauge
Output Signal: 4–20 mA
Supply Voltage: 8–30 VDC
Pressure Connection: G 1/4-18 NPT Male
Electrical Connection: DIN 43650 Form C
Enclosure Protection: IP67
Temperature Range: -40°C to +125°C
Wetted Parts: Stainless Steel
Series: SETRA 3100
Approval: cURus
RoHS Compliant
Weight: Approximately 35 g
Product Features
0–250 Bar High-Pressure Measurement
Stable 4–20 mA Industrial Output
Sputtered Thin-Film Sensing Technology
Compact OEM Design
Stainless-Steel Wetted Parts
IP67 Protection
Wide Operating Temperature Range
Suitable For Continuous Pressure Monitoring
Field of Application
Hydraulic Systems
Industrial Machinery
Compressors
Pumps
Irrigation Systems
Process Equipment
Refrigeration Systems
HVAC Equipment
OEM Pressure Monitoring
Gas and Fluid Pressure Measurement
Ambient Condition
The Transmitter is Designed For Industrial Environments With An Operating Temperature Range of Approximately -40°C to +125°C.IP67 Enclosure Protection Helps Protect The Transmitter Against Dust And Water Ingress Material
The 3100 Series Uses Stainless-Steel Wetted Components For Compatibility With Demanding Industrial Pressure Applications Electrical Data
Supply: 8–30 VDC Output: 4–20 mA Electrical Connection: DIN 43650 Form C Installation Guide
Install The Transmitter On a Compatible 1/4″ NPT Pressure Connection. Ensure The Process Connection is Clean And Properly Sealed.Connect The DC Power Supply And 4–20 mA Signal According To The Applicable Wiring Configuration.Do Not Exceed The Specified Pressure Range.Protect The Electrical Connection From Moisture During Installation. Approval
The Available Specification Lists cURus Approval And RoHS Compliance. Accessories
Compatible Pressure Fittings
NPT Adapters
Sealing Accessories
Electrical Mating Connector
Installation And Mounting Accessories
Suitable 4–20 mA Control-System Wiring Accessories
Product Summary
SETRA 3100B0250S02B Pressure Transmitter Is a 0–250 Bar Industrial Pressure Transmitter With 4–20 mA Output, 8–30 VDC Supply, 1/4″ NPT Male Process Connection And IP67 Protection.It Is Suitable For Hydraulic, Industrial, OEM, Pump, Compressor And Process-Pressure Monitoring Applications.
Additional Information:
Item Code:3100B0250S02B Setra Pressure Transmitter 0-250 Bar
The Setra 3100B0060G01B Pressure Transmitter is Designed For Accurate And Reliable Pressure Measurement In Industrial Applications.It Is Suitable For Monitoring Pressure In Hydraulic Systems,Pneumatic Equipment,Industrial Machinery,Pumps And Compressors.Its Robust Construction Makes It Suitable For Demanding Industrial Environments
Technical Data
Brand:Setra
Model:3100B0060G01B
Product Type:Pressure Transmitter
Pressure Range:0 to 60 Bar
Pressure Type:Gauge
Measurement:Industrial Pressure
Output Signal:4–20 mA
Accuracy:T±0.25% FS
Supply:8–30 VDC
Connection:G1/4,Male
Electrical:DIN 43650 Form C
Protection:IP67
Temperature:−40°C to +125°C
Product Features
Reliable Pressure Measurement
Compact And Robust Industrial Design
Designed For Continuous Pressure Monitoring
Suitable For Industrial Automation Systems
Stable Performance Under Specified Operating Conditions
Easy Integration With Compatible Control Systems
Designed For Demanding Industrial Applications
Field of Application
Hydraulic Power Packs
Pneumatic Systems
Industrial Compressors
Water Treatment Plants
Pumping Systems
HVAC Equipment
Manufacturing Machinery
Process Control Systems
Industrial Automation
Pressure Monitoring Equipment
Ambient Conditions
Operating Temperature:Refer To The Manufacturer Datasheet
Storage Temperature:Refer To The Manufacturer Datasheet
Humidity:As Specified By The Manufacturer
Environmental Protection:Confirm The IP Rating Before Installation
Material
Housing:As Specified For The Model
Wetted Parts:Verify The Manufacturer Material Specifications
Sealing:Model-Specific
Connector:As Supplied For The Selected Configuration
Electrical Data
Supply Voltage:8–30 VDC
Output Signal:4–20 mA
Electrical Connection:DIN 43650 Form C
Circuit:2-Wire
Reverse Polarity Protection:Yes
Electrical Protection:As Per Manufacturer Specifications
Installation Guide
Check That The Pressure Range And Process Connection Are Suitable For The Application
Install The Transmitter Using The Appropriate G1/4 Pressure Connection
Ensure That The Process Connection is Properly Sealed
Connect The 8–30 VDC Power Supply and 4–20 mA Output According To The Wiring Diagram
Avoid Excessive Tightening During Installation
Check For Leakage And Verify The Output Signal Before Commissioning
Install The Transmitter In a Location Protected From Excessive Vibration And Mechanical Damage
Approval
CE:Refer To The Applicable Model Certification
UL:Verify The Exact Ordering Code
RoHS:Compliant
IP67:Enclosure Protection
cURus:Confirm Against The Supplied Product Certificate
The SETRA 3100 Series Pressure Transmitter is Designed For Industrial Pressure Measurement And Monitoring Applications.It Is Suitable For Use In Industrial Automation,Hydraulic Systems,Pneumatic Equipment And Process Control Systems.Its Compact Design Allows Easy Installation In a Wide Range Of Industrial Environments Technical Data
Brand: SETRA
MANUFACTURER: SETRA
Series: 3100
Part Number: 3100B0025G05BO2
Pressure Range: 0 to 25 Bar
Pressure Type: Gauge Pressure
Measurement: Pressure
Supply: 8-32 VDC
Output Signal: 4…20 MA
Accuracy: 0.25%
Pressure Connection: 1/4″ NPT 304 SS.
Response Time: Model Dependent
MADE IN : USA
Product Features
Compact And Robust Industrial Design
Reliable Pressure Measurement
Suitable For Continuous Pressure Monitoring
Designed For Industrial Applications
Easy Integration With Compatible Control Systems
Suitable For Automation And Process Monitoring
Designed For Long-Term Industrial Operation
Field of Application
Industrial Automation Systems
Hydraulic Pressure Monitoring
Pneumatic Equipment
Air Compressors
Pumping Systems
HVAC Systems
Industrial Machinery
Process Control Systems
Manufacturing Plants
Pressure Monitoring Equipment
Ambient Condition
Operating Temperature: −40°C to +125°C (Configuration Dependent)
SETRA Model 3100 Is a Compact OEM Industrial Pressure Transmitter Designed For Accurate And Reliable Measurement of Gauge Pressure.Part No.3100B0007G05BO2 is Specified For a 0 to 7 Bar Pressure Range.The Model 3100 Uses Sputtered Thin-Film Sensing Technology And Rugged Welded Stainless-Steel Construction For Demanding Industrial Applications.
Technical Data
Model:SETRA 3100
Part No:3100B0007G05BO2
Pressure Range:0 to 7 Bar
Supply:8-32 VDC
OUTPUT:4…20 MA
CONNECTION:1/4″ NPT 304 SS
Pressure Type:Gauge
Accuracy:±0.25% FS
Response Time:1 ms
Enclosure Protection:IP67
Wetted Parts:17-4PH SS Diaphragm,304 SS Fittings
Operating/Storage Temperature:-40°C to +125°C
Compensated Temperature Range:-40°C to +125°C
Long-Term Stability:±0.2% FS For Ranges Below 60 Bar
Construction:All-Welded SS
Weight:Approximately 35 g
Product Features
High Accuracy And Repeatability
Sputtered Thin-Film Sensing Technology
Compact Design,Less Than 1 Inch Diameter
Rugged SS Construction
IP67 Environmental Protection
Excellent Vibration And Shock Resistance
Reverse Wiring Protection
Fast 1 ms Response Time
Suitable for OEM And Industrial Equipment
Field of Application
Hydraulic Systems
Industrial Machinery
Booster Pump Systems
Water And Irrigation Systems
Process Equipment
Compressors
HVAC And Industrial Automation
Power Generation Equipment
Mobile And Off-Highway Machinery
Pressure Monitoring And Control Systems
Ambient Condition
The Transmitter is Designed For Operation And Storage From-40°C to +125°C.Its IP67 Enclosure Provides Protection Against Dust And Temporary Water Exposure When Correctly Installed Material
The Pressure Sensing Diaphragm is 17-4PH SS,With 304 SS Fittings.The All-Welded SS Construction Provides Durability For Industrial Environments Electrical Data
The Model 3100 Family is Available With Multiple Electrical Output Configurations,Including 4–20 mA,1–6 VDC,1–5 VDC,0.5–4.5 VDC,0–5 VDC and 0–10 VDC,Depending On The Configured Part Number.The Exact Electrical Output And Connection Should Be Verified Against The Complete Ordering Code Before Installation.For 0–7 Bar versions,Setra Specifies That 0–10 V Output is Not Available Below 7 Bar Installation Guide
Verify The Pressure Range,Output And Pressure Connection Before Installation
Install The Transmitter Using The Correct Compatible Pressure Fitting
Do Not Exceed The Rated Pressure Range
Connect The Electrical Wiring According To The Applicable Setra Wiring Diagram
Protect The Cable/Connector From Excessive Moisture,Mechanical Damage And Contamination
Check For Leakage And Verify The Output Signal After Installation
Approval
Model 3100 is CE And UL Approved and RoHS Compliant,With IP67 protection Accessories
SETRA 3100B0006C05BO2 is a Pressure Transmitter Designed For Accurate And Reliable Pressure Measurement In Industrial Applications.It Is Suitable For Monitoring Pressure In Process Equipment,Machinery,HVAC Systems And Other Industrial Installations Where Dependable Pressure Measurement Is Required. Technical Data
Brand: SETRA
Model / Part No.: 3100B0006C05BO2
Pressure Range: -1 to 6 Bar
Pressure Type: Gauge / Vacuum to Positive Pressure
Output: 4…20 MA
Electrical Supply: 8-32 VDC
Pressure Connection: 1/4″ NPT 304 SS.
Application: Industrial Pressure Measurement
Product Features
Accurate Pressure Measurement
Reliable Industrial Construction
Suitable For Continuous Pressure Monitoring
Compact Transmitter Design
Easy Installation And Maintenance
Suitable For OEM And Industrial Applications
Wide Range Of Pressure Monitoring Applications
Field of Application
HVAC and Air Conditioning Systems
AHU and Ventilation Systems
Industrial Machinery
Process Equipment
Pumps and Compressors
Pneumatic Systems
Manufacturing Plants
Filtration and Air Handling Systems
Industrial Automation
Pressure Monitoring Systems
Ambient Condition
The Transmitter Should Be Installed And Operated Within The Temperature And Environmental Limits Specified For The Exact SETRA Configuration. Avoid Installation In Locations Exposed To Excessive Vibration,Corrosive Chemicals,Moisture Or Temperatures Outside The Manufacturer’s Specified Limits. Material
Construction And Wetted Materials Are According To The Original SETRA 3100 Series Configuration Selected For The Part Number. Electrical Data
Electrical Supply And Output Signal Are Configuration Dependent.Verify The Transmitter Nameplate/Datasheet Before Electrical Connection. Use a Suitable Regulated Power Supply And Correct Wiring Polarity. Installation Guide
Confirm The Pressure Range And Process Connection.
Install The Transmitter Securely On The Pressure Port.
Use Suitable Sealing Material Where Required.
Connect The Electrical Wiring According To The Transmitter Wiring Configuration.
Ensure The Applied Pressure Remains Within The Specified Range.
Check For Leakage And Verify The Output Signal After Installation.
Approval
Approvals And Certifications Are Configuration Dependent. Please Verify The Original SETRA Documentation/Nameplate For The Exact 3100B0006C05BO2 Model. Accessories
Compatible Pressure Fittings
Connection Adapters
Sealing Accessories
Electrical Connectors
Pressure Tubing And Installation Accessories
For Industrial Pressure Measurement – SETRA 3100B0006C05BO2, Range -1 to 6 Bar.
Setra Model 3100B1800S2TB is a High-Pressure OEM Industrial Pressure Transmitter Designed For Accurate And Reliable Pressure Measurement In Hydraulic,Industrial And Process Applications.It Uses Sputtered Thin-Film Sensing Technology With Rugged Stainless-Steel Construction.The Specified Model Provides a 0–1800 Bar Pressure Range With 4–20 mA Analogue Output
Technical Data
Model: 3100B1800S2TB
Pressure Range: 0–1800 Bar
Accuracy: ±0.25% Full Scale
Output: 4–20 mA
Supply Voltage: 8–30 VDC
Pressure Connection: G 1/4-18 NPT Male
Electrical Connection: DIN 43650 Form C
Enclosure: IP67
Response Time: Approximately 1 ms
Operating/Compensated Temperature: -40°C to +125°C
Product Features
High-Pressure Measurement Up To 1800 Bar
±0.25% FS Accuracy
Sputtered Thin-Film Sensing Element
4–20 mA Industrial Output
2-Wire Configuration
All-Welded Stainless-Steel Construction
IP67 Environmental Protection
Reverse-Wiring Protection
High Vibration Resistance
Compact OEM Design
RoHS Compliant
Field Of Application
Hydraulic Systems,Hydraulic Power Units,High-Pressure Pumps, Compressors,Industrial Machinery,Pressure Testing Equipment,Process Monitoring,Power Generation Equipment,Irrigation Systems,OEM Machinery,Industrial Automation And High-Pressure Process Applications.
Ambient Condition
Operating And Storage Temperature: Approximately -40°C to +125°C.The IP67 Enclosure Provides Protection Against Dust And Water Ingress When Properly Installed.
Material
Wetted Components Include 17-4PH Stainless-Steel Diaphragm And 304 Stainless-Steel Fittings.The Transmitter Features Rugged All-Welded Stainless-Steel Construction.
Electrical Data
Output: 4–20 mA;
Supply: 8–30 VDC;
Circuit: 2-Wire. Maximum Loop Resistance Is Dependent On Supply Voltage. Reverse-Wiring Protection Is Provided.
Installation Guide
Verify The Pressure Range, Pressure Port And Electrical Configuration Before Installation.Mount The Transmitter Securely And Avoid Excessive Mechanical Force.Connect The 4–20 mA Loop Using a Suitable 8–30 VDC Supply.Check All Connections For Leakage And Verify The Output Signal Before Commissioning. Follow The Applicable Setra Installation Instructions.
Approval
The Model 3100 Series is Available With CE/UL Approvals And RoHS Compliance Depending On The Exact Configuration. Confirm The Approval Marking For The Supplied Part Number Before Installation.
Accessories
Suitable Accessories May Include Mating Electrical Connectors,Pressure Adapters,Seals,Cables,Mounting Hardware And Process-Connection Accessories.Accessories Should Be Selected According To The Exact Transmitter Configuration.
Setra Model 3100B0700S01B is a High-Pressure OEM Pressure Transmitter Designed For Accurate And Reliable Measurement Of Hydraulic And Industrial Pressure.It Uses Sputtered Thin-Film Sensing Technology With Rugged Stainless-Steel Construction And IP67 Environmental Protection.The 0–700 Bar Range Makes It Suitable For Demanding High-Pressure Applications. Technical Data
Model: 3100B0700S01B
Pressure Range: 0–700 Bar
Output: 4–20 mA
Supply Voltage: 8–30 VDC
Accuracy: ±0.25% Full Scale
Pressure Connection: G 1/4-18 NPT Male
Electrical Connection: DIN 43650 Form C
Enclosure Rating: IP67
Operating/Storage Temperature: -40°C to +125°C
Response Time: Approx. 1 ms
Wetted Parts: Stainless Steel
Construction: All-welded stainless steel
Approval: cURus
RoHS Compliant
Product Features
High-Pressure Measurement Up to 700 Bar
±0.25% FS Accuracy
Sputtered Thin-Film Sensing Element
Rugged Stainless-Steel Construction
IP67 Protection Against Moisture And Dust
Fast Response Time
Wide Operating Temperature Range
Reverse Wiring Protection
Suitable For OEM And Industrial Equipment
Designed For High Shock And Vibration Environments
Field Of Application
Hydraulic Pressure Systems
Hydraulic Machinery
Industrial OEM Equipment
Pumps and Variable-Speed Pumps
Compressors
Refrigeration Systems
Industrial Machinery
Irrigation Pressure Systems
Process Control Equipment
High-Pressure Fluid Systems
HVAC/R Equipment
Ambient Condition
The Transmitter is Designed For Demanding Industrial Environments. Operating And Storage Temperature is Approximately -40°C to +125°C. IP67 Enclosure Protection Provides Resistance Against Dust And Temporary Water Exposure Material
The Model 3100 Uses An All-Welded Stainless-Steel Construction.Wetted Components Include Stainless-Steel Materials Suitable For Compatible Industrial Pressure Media Electrical Data
Output: 4–20 mA
Supply: 8–30 VDC
Circuit: 2-wire
Electrical Connection: DIN 43650 Form C
Reverse Wiring Protection Is Provided
Installation Guide
Install The Transmitter On a Compatible Pressure Port Using The Correct Sealing Method And Suitable Tools.Ensure That The Pressure Applied Remains Within The Rated 0–700 Bar Range.Connect The Power Supply And Signal Wiring According To The Specified Electrical Configuration.For Outdoor Or Electrically Noisy Installations,Use Appropriate Shielded Wiring And Grounding Practices.Avoid Excessive Mechanical Stress On The Transmitter And Wiring Approval
cURus Approved And RoHS Compliant.Always Verify The Exact Certification Requirements For The Intended Installation Before Commissioning Accessories
Compatible Accessories May Include Pressure Fittings,Sealing Components, Electrical Connectors,Cables,Mounting Hardware and Signal/PLC Interface Equipment.Select Accessories According To The Actual Pressure Connection,Electrical Connection And Application Requirements
