SETRA Model 3100 Is a Compact OEM Industrial Pressure Transmitter Designed For Accurate And Reliable Measurement of Gauge Pressure.Part No.3100B0007G05BO2 is Specified For a 0 to 7 Bar Pressure Range.The Model 3100 Uses Sputtered Thin-Film Sensing Technology And Rugged Welded Stainless-Steel Construction For Demanding Industrial Applications.
Technical Data
Model:SETRA 3100
Part No:3100B0007G05BO2
Pressure Range:0 to 7 Bar
Supply:8-32 VDC
OUTPUT:4…20 MA
CONNECTION:1/4″ NPT 304 SS
Pressure Type:Gauge
Accuracy:±0.25% FS
Response Time:1 ms
Enclosure Protection:IP67
Wetted Parts:17-4PH SS Diaphragm,304 SS Fittings
Operating/Storage Temperature:-40°C to +125°C
Compensated Temperature Range:-40°C to +125°C
Long-Term Stability:±0.2% FS For Ranges Below 60 Bar
Construction:All-Welded SS
Weight:Approximately 35 g
Product Features
High Accuracy And Repeatability
Sputtered Thin-Film Sensing Technology
Compact Design,Less Than 1 Inch Diameter
Rugged SS Construction
IP67 Environmental Protection
Excellent Vibration And Shock Resistance
Reverse Wiring Protection
Fast 1 ms Response Time
Suitable for OEM And Industrial Equipment
Field of Application
Hydraulic Systems
Industrial Machinery
Booster Pump Systems
Water And Irrigation Systems
Process Equipment
Compressors
HVAC And Industrial Automation
Power Generation Equipment
Mobile And Off-Highway Machinery
Pressure Monitoring And Control Systems
Ambient Condition
The Transmitter is Designed For Operation And Storage From-40°C to +125°C.Its IP67 Enclosure Provides Protection Against Dust And Temporary Water Exposure When Correctly Installed Material
The Pressure Sensing Diaphragm is 17-4PH SS,With 304 SS Fittings.The All-Welded SS Construction Provides Durability For Industrial Environments Electrical Data
The Model 3100 Family is Available With Multiple Electrical Output Configurations,Including 4–20 mA,1–6 VDC,1–5 VDC,0.5–4.5 VDC,0–5 VDC and 0–10 VDC,Depending On The Configured Part Number.The Exact Electrical Output And Connection Should Be Verified Against The Complete Ordering Code Before Installation.For 0–7 Bar versions,Setra Specifies That 0–10 V Output is Not Available Below 7 Bar Installation Guide
Verify The Pressure Range,Output And Pressure Connection Before Installation
Install The Transmitter Using The Correct Compatible Pressure Fitting
Do Not Exceed The Rated Pressure Range
Connect The Electrical Wiring According To The Applicable Setra Wiring Diagram
Protect The Cable/Connector From Excessive Moisture,Mechanical Damage And Contamination
Check For Leakage And Verify The Output Signal After Installation
Approval
Model 3100 is CE And UL Approved and RoHS Compliant,With IP67 protection Accessories
Setra Model 3100B1800S2TB is a High-Pressure OEM Industrial Pressure Transmitter Designed For Accurate And Reliable Pressure Measurement In Hydraulic,Industrial And Process Applications.It Uses Sputtered Thin-Film Sensing Technology With Rugged Stainless-Steel Construction.The Specified Model Provides a 0–1800 Bar Pressure Range With 4–20 mA Analogue Output
Technical Data
Model: 3100B1800S2TB
Pressure Range: 0–1800 Bar
Accuracy: ±0.25% Full Scale
Output: 4–20 mA
Supply Voltage: 8–30 VDC
Pressure Connection: G 1/4-18 NPT Male
Electrical Connection: DIN 43650 Form C
Enclosure: IP67
Response Time: Approximately 1 ms
Operating/Compensated Temperature: -40°C to +125°C
Product Features
High-Pressure Measurement Up To 1800 Bar
±0.25% FS Accuracy
Sputtered Thin-Film Sensing Element
4–20 mA Industrial Output
2-Wire Configuration
All-Welded Stainless-Steel Construction
IP67 Environmental Protection
Reverse-Wiring Protection
High Vibration Resistance
Compact OEM Design
RoHS Compliant
Field Of Application
Hydraulic Systems,Hydraulic Power Units,High-Pressure Pumps, Compressors,Industrial Machinery,Pressure Testing Equipment,Process Monitoring,Power Generation Equipment,Irrigation Systems,OEM Machinery,Industrial Automation And High-Pressure Process Applications.
Ambient Condition
Operating And Storage Temperature: Approximately -40°C to +125°C.The IP67 Enclosure Provides Protection Against Dust And Water Ingress When Properly Installed.
Material
Wetted Components Include 17-4PH Stainless-Steel Diaphragm And 304 Stainless-Steel Fittings.The Transmitter Features Rugged All-Welded Stainless-Steel Construction.
Electrical Data
Output: 4–20 mA;
Supply: 8–30 VDC;
Circuit: 2-Wire. Maximum Loop Resistance Is Dependent On Supply Voltage. Reverse-Wiring Protection Is Provided.
Installation Guide
Verify The Pressure Range, Pressure Port And Electrical Configuration Before Installation.Mount The Transmitter Securely And Avoid Excessive Mechanical Force.Connect The 4–20 mA Loop Using a Suitable 8–30 VDC Supply.Check All Connections For Leakage And Verify The Output Signal Before Commissioning. Follow The Applicable Setra Installation Instructions.
Approval
The Model 3100 Series is Available With CE/UL Approvals And RoHS Compliance Depending On The Exact Configuration. Confirm The Approval Marking For The Supplied Part Number Before Installation.
Accessories
Suitable Accessories May Include Mating Electrical Connectors,Pressure Adapters,Seals,Cables,Mounting Hardware And Process-Connection Accessories.Accessories Should Be Selected According To The Exact Transmitter Configuration.
Setra Model 3100B0700S01B is a High-Pressure OEM Pressure Transmitter Designed For Accurate And Reliable Measurement Of Hydraulic And Industrial Pressure.It Uses Sputtered Thin-Film Sensing Technology With Rugged Stainless-Steel Construction And IP67 Environmental Protection.The 0–700 Bar Range Makes It Suitable For Demanding High-Pressure Applications. Technical Data
Model: 3100B0700S01B
Pressure Range: 0–700 Bar
Output: 4–20 mA
Supply Voltage: 8–30 VDC
Accuracy: ±0.25% Full Scale
Pressure Connection: G 1/4-18 NPT Male
Electrical Connection: DIN 43650 Form C
Enclosure Rating: IP67
Operating/Storage Temperature: -40°C to +125°C
Response Time: Approx. 1 ms
Wetted Parts: Stainless Steel
Construction: All-welded stainless steel
Approval: cURus
RoHS Compliant
Product Features
High-Pressure Measurement Up to 700 Bar
±0.25% FS Accuracy
Sputtered Thin-Film Sensing Element
Rugged Stainless-Steel Construction
IP67 Protection Against Moisture And Dust
Fast Response Time
Wide Operating Temperature Range
Reverse Wiring Protection
Suitable For OEM And Industrial Equipment
Designed For High Shock And Vibration Environments
Field Of Application
Hydraulic Pressure Systems
Hydraulic Machinery
Industrial OEM Equipment
Pumps and Variable-Speed Pumps
Compressors
Refrigeration Systems
Industrial Machinery
Irrigation Pressure Systems
Process Control Equipment
High-Pressure Fluid Systems
HVAC/R Equipment
Ambient Condition
The Transmitter is Designed For Demanding Industrial Environments. Operating And Storage Temperature is Approximately -40°C to +125°C. IP67 Enclosure Protection Provides Resistance Against Dust And Temporary Water Exposure Material
The Model 3100 Uses An All-Welded Stainless-Steel Construction.Wetted Components Include Stainless-Steel Materials Suitable For Compatible Industrial Pressure Media Electrical Data
Output: 4–20 mA
Supply: 8–30 VDC
Circuit: 2-wire
Electrical Connection: DIN 43650 Form C
Reverse Wiring Protection Is Provided
Installation Guide
Install The Transmitter On a Compatible Pressure Port Using The Correct Sealing Method And Suitable Tools.Ensure That The Pressure Applied Remains Within The Rated 0–700 Bar Range.Connect The Power Supply And Signal Wiring According To The Specified Electrical Configuration.For Outdoor Or Electrically Noisy Installations,Use Appropriate Shielded Wiring And Grounding Practices.Avoid Excessive Mechanical Stress On The Transmitter And Wiring Approval
cURus Approved And RoHS Compliant.Always Verify The Exact Certification Requirements For The Intended Installation Before Commissioning Accessories
Compatible Accessories May Include Pressure Fittings,Sealing Components, Electrical Connectors,Cables,Mounting Hardware and Signal/PLC Interface Equipment.Select Accessories According To The Actual Pressure Connection,Electrical Connection And Application Requirements
The SETRA Model 3200 is a heavy-duty industrial OEM pressure Transducer using a sputtered thin-film sensing element. The Model 3200 is designed for demanding industrial applications and is available with Different Pressure Ranges, outputs, pressure ports and electrical connections.
Product Information
Brand: SETRA
Model: 3200
Part No.: 3200B0100S05BO2
Type: Pressure Transmitter / Pressure Transducer
Pressure Range: 0 to 100 Bar
Pressure Type: Gauge
Technology: Sputtered Thin-Film
Construction: All-welded stainless steel
Protection: IP67
Accuracy: Model 3200 specifications vary by configuration; the current SETRA product page lists up to ±0.25% FS, while the referenced 3200 datasheet lists ±0.5% FS. Verify the exact part-number configuration before publishing a guaranteed accuracy.
Technical Data
Parameter
Specification
Model
SETRA 3200
Part Number
3200B0100S05BO2
Range
0–100 Bar
Sensing Technology
Sputtered Thin Film
Accuracy
Configuration dependent
Pressure Type
Gauge
Wetted Material
17-4 PH Stainless Steel diaphragm; 304 SS fittings
Enclosure
IP67
Response Time
Approx. 1 ms
Operating Temperature
-40°C to +125°C
Storage Temperature
-40°C to +125°C
Construction
All-welded stainless steel
Overpressure
Up to 3 × FS depending on pressure range/configuration
Long-Term Stability
±0.2% FS for ranges below 60 Bar in referenced datasheet
The 0–100 Bar range is within the Model 3200’s published range options.
Product Features
Heavy-duty industrial design
Sputtered thin-film pressure sensing
Compact construction
All-welded stainless-steel body
IP67 environmental protection
Excellent long-term stability
High resistance to vibration
Reverse-wiring protection
Multiple electrical output options
No oil-filled sensing system
Designed for OEM and industrial applications
RoHS compliant
CE/UL approvals available depending on configuration
Field of Application
Suitable applications include:
Industrial machinery
Hydraulic systems
Pneumatic systems
Compressors
Pumps
Process equipment
Chemical processing
Oil & gas equipment
Water-treatment equipment
HVAC and building equipment
OEM machinery
Factory automation
Heavy industrial equipment
Pressure monitoring and control systems
SETRA states that its pressure transmitters are designed for applications involving both liquids and gases, subject to material compatibility.
Ambient Condition
Operating temperature: approximately -40°C to +125°C
Storage temperature: approximately -40°C to +125°C
Protection: IP67
Suitable for demanding industrial environments
High vibration resistance
Media must be compatible with the wetted materials.
Material
Wetted Parts:
17-4 PH Stainless Steel diaphragm
304 Stainless Steel fittings
Body/Construction:
Stainless-steel construction
All-welded design
The exact pressure-port material/configuration should be confirmed against the individual part-number ordering code.
Electrical Data
The Model 3200 platform supports different electrical configurations, depending on the ordered part number:
Current Output
Output: 4–20 mA
Circuit: 2-wire
Excitation: 8–30 VDC
Voltage Outputs
0–10 VDC
0–5 VDC
1–5 VDC
1–6 VDC
0.5–4.5 VDC
Ratiometric
0.5–4.5 VDC
5 VDC nominal excitation
The exact output for 3200B0100S05BO2 should be confirmed from the manufacturer’s ordering configuration before specifying it on a product listing.
Installation Guide
Confirm that the pressure range and pressure medium are suitable.
Install the transmitter using the correct pressure connection.
Do not exceed the rated pressure range during normal operation.
Connect the electrical supply according to the applicable wiring diagram.
Use appropriate shielded cable where required by the installation environment.
Ensure proper grounding for metal housings/enclosures.
Avoid excessive mechanical stress on the pressure port and electrical connector.
Check for leakage after installation.
Apply pressure gradually during commissioning.
SETRA’s installation instructions specify that the Model 3100/3200 is designed for gases or liquids compatible with 17-4 PH stainless steel and provide separate wiring arrangements for voltage and current outputs.
Approval & Compliance
Depending on configuration, the Model 3200 platform is specified with:
CE
UL
RoHS
IP67 protection
Approval availability can depend on the exact electrical and mechanical configuration.
