SETRA Model 3100S0010G05BO3 is a compact industrial OEM Pressure Transmitter for reliable 0–10 Bar gauge pressure measurement.It uses sputtered thin-film sensing technology and rugged welded stainless-steel construction for demanding applications
Technical Data
Brand: SETRA
Part No:3100S0010G05BO3
Pressure Range:0 TO 10 Bar
OUTPUT:0…10 V
Supply:12-32 VDC
CONNECTION:1/4″ NPT 304 SS
Pressure Type: Gauge
Accuracy:±0.25% FS
Diaphragm:17-4 PH Stainless Steel
Fittings:304 Stainless Steel
Operating/Storage Temperature: -40°C to +125°C
Response Time: Approx. 1 ms
Long-Term Stability: ±0.2% FS for ranges below 60 Bar
Product Features
High accuracy and repeatability
Rugged stainless-steel construction
Excellent long-term stability
No oil-filled sensor design
Reverse wiring protection
High vibration resistance
IP67 environmental protection
Compact OEM design
Suitable for space-limited installations
Field Of Application
Hydraulic & Pneumatic Systems
HVAC & Refrigeration
Compressors & Pumps
Industrial Machinery
Process Equipment
Booster Pump Systems
Irrigation Systems
Power Generation
OEM Machinery
Pressure Monitoring & Control
Ambient Condition
Operating and storage temperature is -40°C to +125°C. The transmitter is designed for industrial environments involving vibration and moisture exposure.Application pressure must remain within the rated range.
Material
Sensor Diaphragm:17-4 PH Stainless Steel
Fittings:304 Stainless Steel
Construction:Welded Stainless Steel
Enclosure:IP67-rated design
Electrical Data
The SETRA 3100 family is available with different electrical configurations, including voltage Current and ratiometric outputs.Supply voltage,Output signal and connector configuration depend on the specific ordering code. Verify the exact electrical configuration of Part No 3100S0010G05BO3 with the applicable manufacturer documentation before installation.
Installation Guide
Confirm the pressure range is suitable
Install using the correct pressure connection
Tighten fittings without excessive force
Connect wiring according to the applicable diagram
Protect electrical connections from moisture
Apply power after completing pressure and electrical connections.
Check for leakage and verify the output signal
Approval
Model 3100 documentation indicates RoHS compliance and IP67 protection Applicable approvals may vary by configuration verify the exact approval for Part No 3100S0010G05BO3 before purchase or installation
Accessories
Mating Electrical Connector
Sealing Washer
Pressure Fittings
Mounting Hardware
Pressure Tubing/Fittings
Shielded Electrical Cable
Signal/Power Wiring Accessories
Summary
SETRA 3100S0010G05BO3 0 TO 10 Bar Pressure Transmitter is suitable for industrial OEM pressure measurement,Hydraulic,Pneumatic,HVAC, compressor,Pump and process-control applications
The SETRA Model 3200 is a heavy-duty industrial OEM pressure Transducer using a sputtered thin-film sensing element. The Model 3200 is designed for demanding industrial applications and is available with Different Pressure Ranges, outputs, pressure ports and electrical connections.
Product Information
Brand: SETRA
Model: 3200
Part No.: 3200B0100S05BO2
Type: Pressure Transmitter / Pressure Transducer
Pressure Range: 0 to 100 Bar
Pressure Type: Gauge
Technology: Sputtered Thin-Film
Construction: All-welded stainless steel
Protection: IP67
Accuracy: Model 3200 specifications vary by configuration; the current SETRA product page lists up to ±0.25% FS, while the referenced 3200 datasheet lists ±0.5% FS. Verify the exact part-number configuration before publishing a guaranteed accuracy.
Technical Data
Parameter
Specification
Model
SETRA 3200
Part Number
3200B0100S05BO2
Range
0–100 Bar
Sensing Technology
Sputtered Thin Film
Accuracy
Configuration dependent
Pressure Type
Gauge
Wetted Material
17-4 PH Stainless Steel diaphragm; 304 SS fittings
Enclosure
IP67
Response Time
Approx. 1 ms
Operating Temperature
-40°C to +125°C
Storage Temperature
-40°C to +125°C
Construction
All-welded stainless steel
Overpressure
Up to 3 × FS depending on pressure range/configuration
Long-Term Stability
±0.2% FS for ranges below 60 Bar in referenced datasheet
The 0–100 Bar range is within the Model 3200’s published range options.
Product Features
Heavy-duty industrial design
Sputtered thin-film pressure sensing
Compact construction
All-welded stainless-steel body
IP67 environmental protection
Excellent long-term stability
High resistance to vibration
Reverse-wiring protection
Multiple electrical output options
No oil-filled sensing system
Designed for OEM and industrial applications
RoHS compliant
CE/UL approvals available depending on configuration
Field of Application
Suitable applications include:
Industrial machinery
Hydraulic systems
Pneumatic systems
Compressors
Pumps
Process equipment
Chemical processing
Oil & gas equipment
Water-treatment equipment
HVAC and building equipment
OEM machinery
Factory automation
Heavy industrial equipment
Pressure monitoring and control systems
SETRA states that its pressure transmitters are designed for applications involving both liquids and gases, subject to material compatibility.
Ambient Condition
Operating temperature: approximately -40°C to +125°C
Storage temperature: approximately -40°C to +125°C
Protection: IP67
Suitable for demanding industrial environments
High vibration resistance
Media must be compatible with the wetted materials.
Material
Wetted Parts:
17-4 PH Stainless Steel diaphragm
304 Stainless Steel fittings
Body/Construction:
Stainless-steel construction
All-welded design
The exact pressure-port material/configuration should be confirmed against the individual part-number ordering code.
Electrical Data
The Model 3200 platform supports different electrical configurations, depending on the ordered part number:
Current Output
Output: 4–20 mA
Circuit: 2-wire
Excitation: 8–30 VDC
Voltage Outputs
0–10 VDC
0–5 VDC
1–5 VDC
1–6 VDC
0.5–4.5 VDC
Ratiometric
0.5–4.5 VDC
5 VDC nominal excitation
The exact output for 3200B0100S05BO2 should be confirmed from the manufacturer’s ordering configuration before specifying it on a product listing.
Installation Guide
Confirm that the pressure range and pressure medium are suitable.
Install the transmitter using the correct pressure connection.
Do not exceed the rated pressure range during normal operation.
Connect the electrical supply according to the applicable wiring diagram.
Use appropriate shielded cable where required by the installation environment.
Ensure proper grounding for metal housings/enclosures.
Avoid excessive mechanical stress on the pressure port and electrical connector.
Check for leakage after installation.
Apply pressure gradually during commissioning.
SETRA’s installation instructions specify that the Model 3100/3200 is designed for gases or liquids compatible with 17-4 PH stainless steel and provide separate wiring arrangements for voltage and current outputs.
Approval & Compliance
Depending on configuration, the Model 3200 platform is specified with:
CE
UL
RoHS
IP67 protection
Approval availability can depend on the exact electrical and mechanical configuration.
